Stage contract for Routine maintenance and repairs civil / sanitary works including face lifting , Scientific cleaning & sterilization of water storage of tanks , Roll of Honour Boards and display of Name plates etc at District Court complex Srinagar for the Fiscal Year 2025-2026.Serial No:-2- 1 Engagement of Skilled and un-skilled labors . 2 Mazdoor. 3 Carpenter 1st class. 4 Carpenter 2nd class 5 Mason 1st class. 6 Mason 2nd class. 7 Plumber. 8 Black Smith. 9 Earth work in excavation by manual means in trenches forfoundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed:(All kinds of soil) 10 Providing and laying in position cement concrete of specified grade of mix 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) including curing and carriages of material involved but excluding the cost of centring and shuttering. 11 Providing and laying in position cement concrete of specified grade of mix 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) including curing and carriages of material involved but excluding the cost of centring and shuttering. 12 Providing and laying in position cement concrete of specified grade of mix1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) including curing and carriages of material involved but excluding the cost of centring and shuttering. 13 Providing and laying in position specified grade of reinforced cement concrete of mix 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) including curing and carriages of material involved but excluding the cost of centering, shuttering, finishing and reinforcement. 14 Providing & laying damp-proof Course 40 mm thick with cement concrete 1:2:4 (1 cement:2 coarse sand: 4 graded stone agg 12.5 mm nominal size)including all carriages and curing complete. 15 Providing and laying damp-proof Course 50 mm thick with cement concrete 1:2:4 (1 cement:2 coarse sand: 4 graded stone aggregate 20 mm nominal size) including all carriages and curing complete. 16 Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) 17 Providing and laying cement concrete of mix1:1.5:3 (1 cement:1.5 coarse sand:3 graded stone agg. 20 mmnominal size) Crushed in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchors blocks, plain window sills, fillets etc upto floor V level, including curingand all carriages of material involved but excluding the cost of centring, shuttering and finishingcomplete. 18 Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) 19 Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo-Mechanically Treated bars of grade Fe-500D or more including carriages complete. 20 Structural steel work welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete 21 Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting , hoisting , fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished seamless type tubes 22 Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. 23 Centering and shuttering including strutting, propping etc. and removal of form work for: 24 Foundations, footings, bases of columns etc. for mass concrete. 25 Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc. 26 Suspended floors, roofs, landings, balconies and access platforms. 27 Lintel, beams, plinth beams, girders, bressumers and cantilevers. 28 Columns, pillars, piers, abutments, posts and struts. 29 Stairs (excluding landings) except spiral staircases. 30 Edges of slabs and breaks in floors and walls Under 20 cm wide 31 Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation /plinth & Super Structure including curing in Cement mortar 1:6 ( 1 cement : 6 coarse sand) carriages involved complete 32 Half brick masonry with common burnt clay (non-modular) bricks of class designation 7.5 in superstructureincluding curing and carriages complete in : Cement mortar 1:3 ( 1 cement : 3 coarse sand) 33 Providing wood work in frames of doors, windows, clerestory windows andother frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately): Second class kail wood 34 Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately) K.D wood. 35 Providing wood work in frames of false ceiling, partitions etc sawn and fixed in position budloo/fir wood complete as directed 36 Providing and fixing glazed shutters for doors, windows and clerestory windows using 4mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws. First class kail wood -35mm thick 37 Providing and fixing wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge : First class kail wood 35mm thick 38 Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embeddings in cement concrete block 30x10x15 cm 1:3:6 mix ( 1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size). 39 Providing and fixing 32 mm thick paneled door shutters, including ISI marked black enameled M.S. butt hinges with necessary screws including paneling of 12mm thick decorative Nova pan board both sides laminated as per the approved design complete with required beading/moldings. (styles and rails shall be of standard size) in fittings First. Class imported wood. 40 Providing and fixing 32mm thick paneled door shutters, including ISI marked black enameled M.S. butt hinges with necessary screws including cost of 25-35mm thick paneling of approved design with required beading/moldings. First. Class imported wood. 41 Providing and fixing 32 mm thick paneled door shutters, including ISI marked black enameled M.S. butt hinges with necessary screws Readymade ornamental modular, factory manufactured machine made of hard wood teak finished, of approved quality, color and shade. 42 Providing and fixing 32 mm thick paneled door shutters, including ISI marked black enameled M.S. butt hinges with necessary screws including paneling of 12mm thick ply decorative both sides laminated board as per the approved design with complete with required beading/moldings. (styles and rails shall be of standard size) First. Class imported wood. 43 Providing hoisting and fixing trusses / purlins / rafters / posts, post plates, in planks and any sort of work or like components, including cost of screws nails etc. complete. First. Class Budloowood. 44 Providing hoisting and fixing trusses / purlins / rafters / posts, post plates, in planks and any sort of work or like components, including cost of screws nails etc. complete.Second class Kail wood 45 Providing wood work in frames of false ceiling, partitions etc. sawn and fixed in position Kiln seasoned and chemically treated hollock wood 46 Extra for circular works, such as in frames of fan light 47 Kiln seasoned and chemically treated hollock wood 48 Providing and fixing of wooden paneling/ lining of 12mm (net thickness) including cost of screws, wooden plugs, Touchwood etc. complete as per directions of EIC 49 made from export wood 50 made from BUDLOO wood 51 Providing and fixing of ply wood including cost of nails adhesive etc. complete at all places. 52 4 mm thick 53 6 mm thick 54 12 mm thick 55 19 mm thick 56 Providing and fixing water proof BWR/ BWP ply wood ISI marked including cost of nails adhesive etc. complete at all places. 57 6 mm thick 58 12 mm thick 59 19 mm thick 60 Providing and fixing of single side laminated ply wood including cost of nails adhesive etc. complete at all places. 61 6 mm thick 62 12 mm thick 63 18 mm thick 64 Providing and fixing of 19mm thick commercial block board at all places including cost of nails and adhesive complete. Thickness/ Pattern/ Design to be approved by EIC. 65 Providing and fixing of 1mm thick Dulmica/ sun mica sheeting including cost of nails and adhesive complete. 66 Providing and fixing of ornamental cornice of following size.1st class budloo/imported wood. 67 40-50 mm face 68 65 mm face 69 75 mm face 70 Providing and fixing of PVC edge beading of size 25x25mm 71 Providing and fixing 20mm thick overlapped weather boarding in soffits of 1st class imported wood including applying priming coat of approved quality primer. 72 Providing and fixing of planed eaves boarding 250mm x 32mm size of 1st Class imported wood. 73 Providing and fixing of planed eaves boarding 250mm x 32mm size of 1st Class Budloo wood. 74 Providing and fixing of KHATAM BANDI ceiling of first class budloo/ fir wood excluding the cost of frame work which is to be paid separately 75 Changez Khani 76 Chaar Gul 77 Chaar Phool 78 Pahal Gardan 79 Dawaz-dal-i-girde 80 Paanch Murabah 81 Providing and fixing of wooden beading ornamental 25mmx6mm size of Budloo wood. 82 Providing and fixing of wire gauze using galvanized M.S wire gauze of average width for aperture 1.4mm with wire of dia. 0.63mm for doors windows and clearstory windows including cost of beading complete. 83 Providing and fixing of MS Mesh 25x25mmwherever required of specified size including cost of beading and nails complete. 84 Providing and fixing of glass panes with wooden fillets of required size wherever necessary. 85 Glass panes 3.5mm thick weighing 8.70 Kg / sqm. 86 Glass panes 4.0 mm thick weighing 10.0Kg / sqm. 87 Glass panes 5mm thick weighing 12.5 Kg / sqm. 88 Providing and fixing of reflective glass panes 4 / 3.5 mm thick in doors windows and clearstory windows including cost of budloo wood beading of required size. 89 Providing & fixing corrugated G.S. sheet roofing fixed with nails with bitumen and G.I limpet washers /self-drilling screws with washers/J- Hooks (up to a pitch of 60 degree) excluding the cost of purlins rafters and trusses 90 0.63 mm thick with zinc coating not less than 275 gm./Sqm 91 0.50 mm thick with zinc coating not less than 275 gm./Sqm 92 Providing & fixingcoated galvalume Hi-rib profile sheets 0.50 mm TCT having a crest height of 28-32mm at 195mm pitch using self drilling and selftapping fasteners of reputed make withpurlins sheet using self drilling and self tapping fasteners incl. ridges/ hips and valleys(including cost of all material, leads, lifts and carriages etc upto site of work complete) with required head loadcomplete.. 93 Providing ridges/ valleys or hips of width 60cm over all width plain G.I sheet fixed with nails G.I limpet washers complete 0.63 mm thick with Zinc coating not less than 275 gm./Sqm 94 Providing ridges/ valleys or hips of width 60cm over all width plain G.I sheet fixed with nails G.I limpet washers complete 0.50 mm thick with Zinc coating not less than 275 gm./Sqm 95 Providing ridges/ valleys or hips of width 60cm over all width plain Colour coated sheets fixed with nails, G.I limpet washers complete0.50 mm thick 96 Providing and fixing Tiled/GRID false ceiling of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections (galvanized @ 120 grams/ sqm, both side inclusive) consisting of main “T” runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross “T” of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main “T” at 600 mm center to center to form a grid of 1200x600 mm and secondary cross “T” of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main “T” runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paintpaint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge. 97 10-12.5 mm thick square edge PVC Laminated Gypsum Tile of size 595x595 mm, made of Gypsum plasterboard manufactured from natural gypsum as per IS 2095 part-I and laminated with white 0.16mm thick fire retardant PVC film on the face side and 12micron metalized polyester on the back side with all edges sealed with the face side PVC film which goes around and wraps the edges and is bonded to the edges and the back side metalized polyester film so as to make the tile a completely sealed unit. 98 10-12.5 mm thick fully Perforated Gypsum Board tile made from plasterboard having glass fiber conforming to IS: 2095 part-I, of size 595x595 mm, having perforation of9.7x9.7 mm at 19.4 mm c/c with center borders of 48mm and the side borders of 30 mm, (or as per directions of EIC) backed with non woven tissue on the back side, having an NRC (Noise Reduction Coefficient) of 0.79, with 50 mm resin bonded glass wool backing. 99 8 mm thick fully perforated Calcium Silicate Board made with Calcareous and Siliceous materials reinforced with cellulose fiber manufactured through autoclaving process to give stable crystalline structure with minimum compressive strength 225 kg/cm2, bending strength 100 kg/cm2, of size 595x595 mm, having perforation of dia. 10mm with minimum perforated area 18% with non-woven tissue on the back side, having an NRC (Noise Reduction Certificate) of 0.85, with 50 mm thick rock wool of 48 kg/cum backing. 100 Providing and fixing at all height false ceiling including frame work made of special sections power pressed from M.S. sheet and galvanized in accordance with zine coating of grade 350 as per IS: 277 and consisting of angle cleats of size 25mm wide × 1.6mm thick with flanges of 22mm and 37mm at 1200mm centre to centre one flange fixed to the ceiling with dash fastener 12.5mm din x 40mm long with 6mm dia bolts to the angle hangers of 25x25x0.55mm of required length, and other end of angle hanger being fixed with nut and bolts to G.I. channels 45x15x0.9mm running at the rate of 1200mm centre to centre to which the ceiling section 0.5mm thick button wedge of 80mm with tapered flanges of 26mm e to G.channel with connecting clips made out of 2.64mm diax230mm long G.I. wire at every SQM junction including fixing the gypsum board with ceiling section and perimeter channels 0.5mm thick 27mm high having flanges of 20mm and 30mm long. the perimeter of ceiling fixed to wall/partition including jointing and fixing to a fush finish of tapered and square edges of the board with recommended filler, jointing tapes, finisher and two coats of primer suitable for board as per manufactures specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed all complete as per drawing and specification and direction of the Engineer in Charge but excluding the cost of painting with: 12.5 mm thick tapered edge gypsum board conforming to IS: 2095- Part I 101 Removing of damaged and providing and fixing at all height false ceiling incl. frame work made of special sections power pressed from MS Sheet and galvanized in accordance with zinc coating of grade 350 as per IS :277 and consisting of angle clents of size 2mm wide x1.60mm thick flanges of 22mm and 37mm at 1200 center to centre one flange fixed to ceiling with dash fastener 12.5mm x 40 mm long with 6mm diabolts to the angle hangers of 25x25x0.55 of required length and other end of angle hanger being fixed with nut and bolts to Gi channels 45x15x0.9mm running at the rate of 1200mm center to center to which the ceiling section 0.50mm thick button wedge of 80mm with tapered flanges of 26mm each having clips of 10.5mm at 450 center to center shall be fixed in direction perndular to Gl channel with connecting clips made out of 2.64mm dia x 230mm long GI SOM wire at every junction incl.fixing the gypsum board with ceiling section and perimeter channels 0.50mm thick 27mm high having flanges of 20mm and 30mm long ,the perimeter of ceiling fixed to wall /partition with the help of rawl plugs at 4500101 center to center with 250101 long drive all screws @ 2300101 interval incljointing and fixing to a flush finish of tapered and squre edges of the board with recommended filler Jointing tapes, finisher and two coats of primer suitable for board as per manufactures specification and also incl. the cost of making openings for light fittings ,grills diffusers all complete as per drawings and specifications 12.5mm thick tapered edge gypsum board incl all primer and painting complete job 102 Providing and fixing of acoustic insulation with 24 gauge G.I net wire netting mesh or frame with G.I stipules etc. 103 50mm thick filled in polythene bags. 104 100mm thick filled in polythene bags. 105 150mm thick filled in polythene bags. 106 Providing and fixing of jute fabric as per approved sample with bituminous paint complete. 107 Cement concrete flooring 1:2:4 (1Cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and carriagesbut excluding cost of nosing of steps etc. complete. 108 40 mm thick 20mm nominal size stone aggregate (crushed) 109 50 mm thick 20mm nominal size stone aggregate (crushed) 110 Providing and fixing 1st quality ceramic glazed Digital tiles conforming to IS: 13753 of minimum thickness 5mm of approved make in all colors, shades, except burgundy, bottle green, black of any size as approved by Engineer In Charge in skirting, riser of steps and dados over 12mm thick bed of cement mortar 1:3 (1 Cement: 3 coarse sand) and jointing with grey cement slurry @3.3 Kg per Sqm including pointing in white cement mixed with pigment of matching shade complete. 111 Providing and fixing 1st quality ceramic glazed floor tiles 300x300mm (thickness to be specified by the manufacturer) of 1st quality conforming of IS :15622of NITCO, ORIENT, SOMANY, KAJARIA, make in all colors, such as white, Ivory, Grey, Fume Red Brown or as approved by Engineer In Charge over 20mm thick bed of cement mortar 1:4 (1 Cement: 4 coarse sand) including pointing the joints with white cement and matching pigment etc. complete 112 Providing and fixing 1st quality Vitrifiedfloor tiles 600x600mm (thickness to be specified by the manufacturer) of 1st quality conforming of IS :15622 of NITCO, ORIENT, SOMANY, KAJARIA, make in all colors, such as white, Ivory, Grey, Fume Red Brown or as approved by Engineer In Charge over 20mm thick bed of cement mortar 1:4 (1 Cement: 4 coarse sand) including pointing the joints with white cement and matching pigment etc. complete 113 Providing and fixing of Interlocking/Chequered precast cement concrete tiles colored(rubber finish) in foot paths & courtyards jointed with neat cement slurry mixed with pigment to match the shade of the tiles including rubbing and cleaning etc. complete on 20mm thick layer of dry sand . 114 40mm thick. 115 50mm thick. 116 75mm thick. 117 Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand)including grouting the joints with white cement and matching pigments etc. complete 118 Size of tile 500x500 mm 119 Size of tile 600x600 mm 120 Size of tile 800x800 mm 121 Size of tile 1000x1000 mm 122 Providing and laying Vitrified tiles in floor with different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of approved brand and manufacturer, in all colours and shades, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm thickness, including grouting of joints 123 Size of tile 500x500 mm 124 Size of tile 600x600 mm 125 Size of tile 800x800 mm 126 Size of tile 1000x1000 mm 127 Providing and laying polished anti-skid vitrified floor tiles of various sizes (thickness to be specified by the manufacturer) approved make like NITCO, JHONSON, KAJARIA in all colors, shades as approved by engineer- in-charge laid on 20mm thick bed of cement mortar 1:4 (1cement: 4 coarse sand) including pointing the joints with matching pigment or any other relevant pigment as directed includingcleaningthefloorafter finishing of work. 128 Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. Polished Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent. 129 Providing and fixing 18mm thick mirror polished, machine cut for floors, kitchen platform, vanity counters facieses and other similar locations of required size of approved shades, color and texture laid over 20mm thick base cement mortar 1:4 (1cement: 4 coarse sand) and joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing etc. including moulding complete at all levels. 130 (Black Granite-Jet Black) of approved quality. 131 (GREY type Granite) of approved quality. 132 (Maroon type/similar Granite) of approved quality. 133 (White marble) of approved quality. 134 (Green marble) of approved quality 135 Providing and fixing gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels 136 Raj Nagar plain white marble/Udaipur green marble/zebra black marble16mm thick 137 Granite of any colour or shade 18mm thick 138 Providing edge moulding to 18 mm/16 mm thick marble stone counters, Vanities etc. including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. 139 Marble Work 140 Granite Work 141 Providing and fixing of flooring AC3 using HDF solid core planks of specified thickness approved quality and color with tongued and grooved jointing including cost of thermo cot and other accessories complete.(to be approved by EIC) 8mm thick 142 Providing and fixing of laminated board flooring AC4 using HDF solid core planks of specified thickness approved quality and color with tongued and grooved jointing including cost of thermo cot and other accessories complete.(to be approved by EIC) 8mm thick 143 Providing and fixing of MDF cornice 25mmx20mm In size. 144 15mm thick cement plaster on brick /concrete wall of mix 1:6 (1cement: 6 fine sand) 145 15mm thick cement plaster on brick / concrete wall of mix 1:4 (1cement: 4 fine sand) 146 12mm thick cement plaster on half brick / concrete wall of mix 1:6 (1cement: 6 fine sand) 147 6 mm thick cement plaster on concrete wall of mix 1:3 (1cement: 3 fine sand) 148 Cement plaster skirting upto 30cm height with cement mortar 1:3 (1 cement: 3 coarse sand), finished with a floating coat of neat cement and curing complete.18 mm thick 149 Providing and applying plaster of Paris putty of 2mm thickness over plastered surface to prepare the surface even and smooth complete. 150 Providing and applying cemement based wall putty 1mm thickness over plastered surface to prepare the surface even and smooth complete. 151 Providing and applying cemement based wall putty 2mm thickness over plastered surface to prepare the surface even and smooth complete. 152 Removing painting by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. 153 Removing white or color wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. 154 Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. 155 Removing lime punning/POP from walls including sand papering and disposal of rubbish as directed etc. complete. 156 Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade on New work (two or more coats) over and including priming coat with water thinnable cement primer 157 Distempering with 1st quality Acrylic/oil bound washable distemper(ready-made) having VOC content less than 50 grams/litre of approved manufacturer and of required shade and colour complete as per manufacturers’ specifications, one or more coats on old work 158 Distempering with 1st quality acrylic distemper (ready mixed)havingVOC content less than 50 gms/litre,two or more coats on new work of approved manufacturer, of required shade and colour complete as per manufacturer’s specifications 159 Two or more coats on new work 160 One or more coats on old work 161 Finishing walls with water proofing cement paint of approved brand and manufacture to give an even shade. 162 New work (two or more coats applied @ 3.84 kg/10sqm) including cost of priming coat @0.80 liter/Sqm 163 Old work (one or more coats applied @ 2.20 kg/10sqm) 164 Applying priming coat with ready mixed white primer of approved brand and manufacture on wood work. 165 Applying priming coat with ready mixed zinc oxide chromate primer of approved brand and manufacture on steel galvanized iron/steel works. 166 Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface. 167 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade. Two or more coats on new work 168 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade, one or more coats on old work. 169 Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade, one or more coats on old work. 170 Wall Painting with acrylic emulsion paint of approved brand andmanufacture to give an even shade. Two or more coats on new work 171 Finishing walls with Acrylic smooth exterior paint of required shade: Old work (one or more coats applied @ 0.90 liters/ 10sqm) 172 Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shadeNew work (Two or more coats applied @ 1.43 litre/10 sqm. Over & including priming coat of exterior primer applied @ 0.90 litre/10 sqm. 173 Dismantling of existing chain link fencing, steel work complete, including stacking of serviceable material and disposal of unserviceable material within a lead as directed. 174 Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 m lead. 175 Dismantling of C.G.I. sheet roofing and stacking of serviceable material and disposal of unserviceable material within a lead as directed by the in- charge engineer. 176 Dismantling of existing wooden ceiling including stacking of serviceable material and disposal of unserviceable material as directed with all leads complete. 177 Dismantling wood work in frames, trusses, purlins and rafters up to 10 meters span and five meters height including stacking the material within 50 meters lead. 178 Dismantling of existing window shutters carefully without breakage including stacking within a lead as directed by the in-charge engineer. 179 Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 meters lead. For thickness of tiles 10 mm to 25 mm 180 Demolishing cement concrete work, including disposal of unserviceable material within the campus as per directions of EIC 1:3:6 or richer mix. 181 Demolishing brick work in cement mortar up to floor V level including stacking of serviceable material and disposal of unserviceable material within the campus as per directions of EIC. 182 Demolishing of rubble stone masonry in cement mortar including stacking of serviceable material and disposal of unserviceable material within the campus as per directions of EIC 183 Providing and fixing aluminum work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixed with dash fastener of required dia. and size including necessary filling up of gaps at junctions i.e, at top, bottom and sides with required EPDM rubber / neoprene gasket felt etc. Aluminum sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminum snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge (glazing, panelling and dash fasteners to be paid for separately.) For fixed portion 184 Anodized aluminum (Anodized transparent or dyed to required shade according to IS:1868, minimum anodic coating of grade AC 15) 185 Powder coated aluminum (minimum thickness of powdercoated 50 microns) 186 For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing offittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately.) 187 Anodized aluminum (Anodized transparent or dyed to required shade according to IS:1868, minimum anodic coating of grade AC 15) 188 Powder coated aluminum (minimum thickness of powdercoated 50 microns) 189 Providing and fixing 12mm thick prelaminated particle board flat pressed three layer or graded wood particle board (conforming to IS: 12823 Grade-I type-II) in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-incharge. Pre-laminated particle board with decorative lamination on bothsides. 190 Providing and fixing glazing in aluminum door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineerin- charge. (Cost of aluminum snap beading shall be paid in basic item.) 191 With floating glass panes of 4.0 mm thickness (weight not less than 10.00 kg / sqm) 192 With float glass panes of 5.0 mm thickness (weight not less than 12.50 kg / sqm) 193 With float glass panes of 8 mm thickness(weight not less than20.0 kg / sqm) 194 Providing and fixing double action hydraulic floor spring of approved brand and manufacture IS : 6315 marked, having brand logo embossed on the body/plate with double spring mechanism and door weight upto 125 kg for doors including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineerin- plate etc. complete as per the direction of Engineer-in-charge.With Stainless Steel cover plate minimum 1.25 mm thickness. 195 Providing and fixing machine molded ACP covering of approved pattern & design, made out of machine cut aluminum sheet and machine holed for receiving dash fastener, over expansion joints on vertical surfaces/ceiling floors, the fixing on plate in one row on one side of joint only shall be done with stainless steel dash fasteners of 8 mm dia. and 75 mm long bolt including providing aluminum washers 2 mm thick & 15 mm dia. at a staggered pitch of 200mm Centre to Centre including drilling holes in the receiving surface and providing expandable plastic sleeves in holes etc. complete as per direction of Engineer-in-charge. 196 ACP 3.5mm thick of required color 197 ACP 4.0mm thick of required color 198 Providing and laying G.S.B. grade including compacting, watering and consolidation with power road roller to the required gradient and camber including all carriages of material complete. 199 Providing and laying G.S.B. grade including compacting, ramming, watering and carriage complete. 200 Supplying and laying of stone soling hand packed tightly including ramming, watering and carriages complete. 201 Supplying and Filling earth, including carrying by lorry, placing, dressing and ramming in layers not exceeding 20cm in depth, breaking clods watering, rolling each layer with ½ tone roller or wooden or steel rammers, and rolling every 3rd and top-most layer with power road roller of minimum 8 tones, filling in ground depressions, Including of all carriages from source to site complete. complete job 202 Engagement of tipper for removal of mulba etc including fuel charges complete. 203 Engagement of excavator (JCB) in all terrains including fuel charges complete. 204 Engagement of hand cart 205 Providing and fixing of locks Godrej/Link make for ward robe, almirah, drawer 206 Providing and fixing of aluminum double channel with wheel set for sliding glass window of approved quality of following sizes. 207 20 mm 208 25 mm 209 Providing and fixing of door closer capsule type of standard make 210 Providing and fixing of door closer spring type of standard make 211 Manufacturing and fixing of computer tables of required size and height of 19mm thick solid core ply board, exposed surface to be laminated with Dulmica sheeting including cost of key boards (readymade), racks drawers, cupboards, cost of brass knobs / Godrej locks and other necessary fittings and fixtures of approved quality and make. (Measurements be made on top surface only) 212 Providing and fabrication of storage Almirah (ornamental) of approved quality 19mm Ply board in sides, shelves and wherever required including 6mm ply wood on back and 19MM ply wood in shutters, inside and outside of shutters finished with Dulmica sheeting of approved quality and color on exposed face of approved design and drawings including painting two or more coats of synthetic enamel paint of approved quality and color inside including cost of following aluminum fittings and locks of Godrej/Link make.15mm dia. M.S. pipe chromium plated with necessary brackets 4-0 length and including all other necessary accessories complete in all respects. (For payments front face to be measured). 213 60 cm deep 214 45 cm deep 215 Supplying and fixing of rolling shutters of approved make made of M.S. laths interlocked together through their entire length and jointed together at the end by end locks mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete including the cost of providing and fixing necessary 27.5 cm long wire springs grade No:2 and M. S. top cover of required thickness for rolling shutters (80x1.25mm M.S Laths with 1.25 mm thick top cover) 216 Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2mm and braced with flat iron diagonals 20x5 mm size with top and bottom rail of T-iron 40x40x6mm with 40mm dia, steel pulleys complete with bolts, nuts, locking arrangement, stoppers, handles, including applying priming coat of approved steel primer 217 Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm sand cast Iron P or S trap, 10 liter low level white P.V.C. flushing cistern, including flush pipe (of approved make) with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required. White vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests. 218 Supply ,installation , testing and commissioningof 1.5 HP water lifiting motor including all necessary fittings labour charges / dismentalling of old one with all carriages comlete. 219 Supply ,installation , testing and commissioningof 1 HP water lifiting motor including all necessary fittings labour charges / dismantalling of old one with all carriages comlete. 220 Scientific cleaning and sterlization of water storage tanks the job involves six stages of cleaning ie; cleaning and sterlization processconsisting of mechanical de-watering high pressure ,cleaning sludge removal ,vaccum cleaning ,anti bacterial spray and finally killing of suspended and fluting bacteria by ultra voilet raidations as directed by engineer in charge. 221 Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm sand cast Iron P or S trap, 10 liter low level white P.V.C. flushing cistern, including flush pipe (of approved make) with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required.White vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests. 222 Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 liter low level white P.V.C. flushing cistern, including flush pipe with manually controlled device (handle lever), conforming to IS:7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: W.C. pan with ISI marked white solid plastic seat and lid. 223 Providing and fixing vitreous china dual purpose closet suitable for use as squatting pan or European type water closet (Anglo Indian W.C. pan) with seat and lid with C.P. brass hinges and rubber buffers, 10 liter low level flushing cistern with fitting and brackets, 40 mm flush bend, 20 mm overflow pipe with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required:White vitreous china dual purpose WC pan with white solid plastic seat lid with white vitreous china flushing cistern and C.P. flush bend 224 Providing and fixing floor mounted, white vitreous china single piece, double traps syphonic water closet of approved brand/make, shape, size and pattern including integrated white vitreous china cistern ofcapacity 10 litres with dual flushing system, including all fittings and fixtures with seat cover, cistern fittings, nuts, bolts and gasket etc including making connection with the existing P/S trap, complete in all respect as per directions of Engineer-in-Charge. 225 Providing and fixing white vitreous china extended wall mounting water closet of size 780x370x690 mm of approved shape including providing and fixing white vitreous china cistern with dual flush fitting, of flushing capacity 3 liter/6 liter (adjustable to 4 liter/8 liters), including seat cover, and cistern fittings, nuts, bolts and gasket etc complete. 226 Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I. clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required:One urinal basin with 5 literwhite P.V.C automatic flushing cistern. 227 Providing and fixing wash basin with C.I. brackets, 15mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required : White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps. 228 Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings. 229 Providing and fixing white vitreous china water closet squatting pan(Indian type) Orissa pattern W.C. pan of size 580x440 mm 230 Providing and fixing white vitreous china pedestal type (Europeantype/wash down type) water closet pan. 231 Providing and fixing P.V.C low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete: 10 liter capacity -White 232 Providing and fixing solid plastic seat with lid for pedestal type W.C. pan Cera, Parry ware complete. 233 Providing and fixing stainless steel A ISI 304 (18/8) kitchen sink as per I.S. 13983 with C.I. brackets and stainless steel plug 40mm including painting of fittings and brackets, cutting and making good the walls wherever required.610x460mm bowl depth 200mm (standard make approved by EIC). 234 Providing and fixing 600x450mm beveled edge mirror of specified brand 235 Providing and fixing beveled edge mirror of specified brand 236 Circular shape 450mm dia. 237 Rectangular shape 450x600mm. 238 Oval shape 450x350mm 239 Providing and fixing of C.P grating 100mm size. ISI marked complete. 240 Providing and fixing of G.I pipes (class B pipes Prakash Surya/ Jindal or equivalent) complete with all necessary G.I fittings and clamps including cutting and making good the walls etc. Internal & External work 241 15mm dia. Nominal bore 242 20mm dia. Nominal bore 243 25mm dia. Nominal bore 244 32mm dia. Nominal bore 245 40mm dia. Nominal bore 246 50mm dia. Nominal bore 247 Providing and fixing of PVC connection with C.P. brass unions 248 300mm long. 249 450mm long 250 600mm long 251 Providing and fixing ball valve (brass) of approved quality complete (Leader/ Saint/ equivalent Make) 252 15mm dia. 253 20mm dia. 254 25mm dia. 255 40mm dia. 256 50mm dia. 257 Providing and fixing gate valve (brass) of approved quality complete (Leader/ Saint Make/ equivalent Make). 258 15mm dia. 259 20mm dia. 260 25mm dia. 261 40mm dia. 262 40mm dia. 263 Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank 264 Construction of platform for W.C. with brick masonry in cement mortar 1:6 mix. Including filling of sand and providing of15mm cement plaster in 1:4 mix. 265 Providing and fixing of C.P. Cups for C.P. fittings. 266 Providing and fixing of C.I. manhole cover heavy duty of following sizes. 267 12x12 268 18x18 269 24X24 270 Supply ,installation,testing and commissioning of water heater (geysers) of copper core including cost of dash fasteners with nuts and washers 271 50 Litre 272 35 Litre 273 25 Litre 274 Providing and fixing Geyser elements (as per Geyser type) 275 Providing and fixing Geyser thermostat of approved quality complete. 276 Providing and fixing C.P. brass bib cock of approved quality (Jaguar- Continental/Hindware-contessa plus/equivalent) 15mm nominal bore short body. 277 Providing and fixing of 15mm size chromium platedbrass pillar cock of approved quality. (Jaguar- continental/Marc/Hindware-contessa plus/equivalent) 278 Providing and fixing of 15mm size chromium plated cast brass angle valve of approved quality. (Jaguar- Continental/Hindware-contessa plus/equivalent) with wall flange 279 Providing and fixing of 15mm size chromium plated cast brass wash basin mixer of approved quality. (Jaguar- Continental/Hindware-contessa plus/equivalent) 280 Providing and fixing of 15mm size chromium plated cast brass sink mixer of approved quality. (Jaguar- Continental/Hindware-contessa plus/equivalent) with flange. 281 Providing and fixing of 15mm size chromium plated cast brass wall mixer Non telephonic with lead of approved quality. (Jaguar-Continental/Hindware- contessa plus/equivalent) with flange 282 P/F Towel ring 20mm dia. (Jaguar-Continental/Hindware-contessa plus/equivalent) with flange 283 P/F Towel rod (Jaguar- Continental/Hindware-contessa plus/equivalent) 284 P/F Stainless Steel Soap Dish holder. 285 P/F Plastic Soap Dispenser wall mounted of size 400ml 286 P/F Plastic Tissue Dispenser wall mount of size, shape and colour as approved by engineer in charge 287 Providing and fixing 600mmx120mmx5mmglass shelf with edges round of supported on anodized aluminum angle frame with C.P. brass brackets and guard rail complete fixed with 40mm long screws, rawl plugs etc. complete. 288 C.P./PVC Long bends of required size of approved quality. 289 C.P. Waste for wash basin of approved quality 290 Providing and fixing of pvc manhole cover of approved make of following sizes. (Heavy type) 291 12x12 292 18x18 293 24X24 294 Construction of soakage pit by way of earth work in excavation including providing and fixing of pre-cast cement concrete rings 0.90 mtr dia. of specified thickness and 200-250 mm wide including all carriages complete. Including disposal of excavated earth within the campus as directed by EIC. 295 Providing and fixing of pre-cast cement concrete lid for soakage pit of specified size and thickness. 296 Construct brick masonry man hole in cement mortar 1:4 (1 cement: 4 coarse sand) RCC top slab with 1:2:4 mix (1 cement : 2 Coarse sand : 4 graded stone aggregate 20mm nominal size) foundation concrete (1:4:8) inside plastering 12mm thick with cement mortar 1:3 (1 cement: 3 coarse sand) finished with floating coat of neat cement and making channel in cement concrete 1:2:4 (1 cement :2 coarse sand : 4 graded stone aggregate 20mm nominal size finished with a floating coat of neat cement complete. 297 Inside size 90 x 90 x 90cm deep including RCC/C.I. manhole cover medium duty with frame of size 60x60mm size. With F.P.S. bricks with class designation 75 and with crushed stone aggregate complete in all respects. 298 Inside size 60 x 60 x 60 cm deep including RCC/C.I. manhole cover medium duty with frame of size 60x60mm size. With F.P.S. bricks with class designation 75 and with crushed stone aggregate complete in all respects. 299 Inside size 45 x 45 x 45cm deep including RCC/C.I. manhole cover medium duty with frame of size 45x45mm size. With F.P.S. bricks with class designation 75 and with crushed stone aggregate complete in all respects. 300 P/F of Rain Guttermade of superior quality and gauge of tin sheets of different colours including fixing of clamps,nuts,washers etc incl fixing of 75mm dia pvc pipe btype for disposal of rainwater upto all floor levels as directed by eic 301 Providing and fixing of PVC (Prince/Finolex/Jindal make) pipe (Type B) in proper gradient in excavated trenches including jointing and refilling the excavated material complete including cost of excavation incl. all fittings &fixtures complete job 302 150mm dia. Pipe 303 100mm dia. Pipe 304 75mm dia. Pipe 305 50mm dia. Pipe 306 Providing and fixing of Health Faucet/jet spray with plastic flexible pipe 8 mm dia, 1.5 m long, wall hooked complete as required, including necessary Accessories, installation charges and complete in full respect as per the directions of Engineer- in-charge. 307 Providing and fixing spindle 15mm dia. All types like washer type/disc type etc. 308 Providing and fixing Mixer leg set (Jaguar/Mark/Cera) 309 Providing & Replacing of Siphon to flushing cistern Cera/Hindware make 310 Providing & Replacing of ball cock of flushing cistern without float 311 Providing & Replacing of ball cock of flushing cistern with float 312 Providing & fixing of polycarbonate corrugated sheets of approved make incl. cost of nails complete job 313 Providing & fixing of PVC polycarbonate plain sheets of approved makeincl. cost of nails complete job 314 Providing & fixing of pvc panelling 10mm of approved make including all related accessories like corner/top flashing, etc complete including grounds, including fixing, screwing, and G.I frame work etc complete 315 Providing & fixing wallpaper of approved pattern & quality to wall surface including chemical & adhesive as per directions of EIC 316 Providing & applying of Touchwood on new work 2 or more coats including preparing the surface, rubbing,sand papering all complete job. 317 Providing & applying of Touchwood on old work one or more coat . 318 Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-incharge. Internal work Concealed fixing the pipe with clamps at 1.00 meter spacing including cutting chases and making good the wall etc. 319 PN-16 pipe, 16mm OD(SDR-7.4) 320 PN-16 pipe , 20mm OD(SDR-7.4) 321 PN-16 pipe , 25mm OD(SDR-7.4) 322 PN-16 pipe , 32mm OD(SDR-7.4) 323 Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-incharge.External work including trenching, refilling etc. 324 PN-16 pipe , 20mm OD (SDR-7.4) 325 PN-16 pipe , 25mm OD (SDR-7.4) 326 PN-16 pipe , 32mm OD (SDR-7.4) 327 PN-16 pipe, 40mm OD (SDR-7.4) 328 PN-10 pipe , 50mm OD (SDR-11) 329 PN-10 pipe , 63mm OD (SDR-11) 330 Providing and fixing PPR Unions 331 PPR Union 20mm 332 PPR Union 25mm 333 PPR Union 32mm 334 PPR Union 40mm 335 PPR Union 50mm 336 PPR Union 63mm 337 Providing and fixing PPR ball valves (RAK/ Astral/ Prince or equivalent) 338 for 25mm dia. 339 for 32mm dia. 340 for 40mm dia. 341 for 50mm dia. 342 for 63mm dia. 343 Providing and fixing of thermal insulation over following dia G.I Pipes at all heights. 344 for 15mm dia. 345 for 20mm dia. 346 for 25mm dia. 347 for 40mm dia. 348 Providing and fixing C.P. 2 in 1 brass bib cock of approved quality (Jaguar- Continental/Hindware-contessa plus/equivalent) 15mm nominal bore 349 Providing & fixing G.I chain link fencing of approved size 50mmx50mm (3.15mm thick) including necessary bolts, welding etc complete 350 Providing & fixing various sizes of 15mm CP Nipples 351 Providing and laying polymer modified cementitous, elastometric, waterproofing & protective composed of best quality portland cement, properly selected & graded aggregates, additives & acrylic emulsion polymer as a binder ( Dr. Fixit Pidifin 2K) including carriage of material complete job. 352 Providing and laying on terrace upto floor five level lime concrete with graded brick agg. 25mm nominal size and 50% mortar comprising of 1lime putty: 2surkhi and curing complete. 353 Providing and fixing of Vertical blinds of required color as approved by EIC 354 Repair of existing vertical blinds including removing,repairing and installation of same all accessories complete job 355 Providing and fixing of roller blinds of required color as approved by EIC 356 Hire charges of shamiyana Pandal and conopy type of appropriate theme & waterproof type) with crewel & net lining inside in walls and ceilingincluding erecting, removal and shifting (in case of change of venue in same premises) of the same with all carriages leads & lifts complete to site of work complete.(on rental Basis) 357 Shamiyana Pandaltype size 358 Conopy type Size 359 Hire charges for Air coolers as per site requirement incl all carriages of material complete upto site of work. 360 Hire charges for Gas Heaters (Pillar Type) including gas cylinders as per site requirement incl all carriages of material complete upto site of work. 361 Hire charges for sofas with slip covers etc as directed by engineer I/Cincluding all carriage complete upto site of work . 362 Hire charges for sofas (Single seater) with slip covers 363 Hire charges for sofas (Double seater) with slip covers 364 Hire charges for sofas (Three seater) with slip covers 365 Hire chargesfor glass tables (4-0x2-0) with all carriagesupto site of work complete and as directed by Engineer I/C. 366 Hirecharges for V.I.P chairs with fancy covers as directedincluding all carriageupto site of workcomplete. 367 Supply of flex banners with all writeups & logos as directed by engineer I/C. all carriage complete . 368 Supply of flex banners with all writeups & logos incl. MS frame as directed by engineer I/C. all carriage complete . 369 Supply of 20mmdia cotton rope of approved makefor national flagincluding all carriage upto site of workcomplete . 370 Hire charges for supply and laying of Superiorcarpetand removing of same after the end of event incluidng all carriages complete 371 Kanath/Tajeer as view cutters 372 Hire charges for supply and laying of red carpet1.22 mtr wide and removing of same after the end of event 373 Providing and laying underlayment foam formating including carriages 374 Hire chargesof Dice/ Stage with decorated roof, ceiling, posts, necessary stairs, furnishingincluding all carriages as directed by engineer in-Charge 375 Hire charges for supply of buffet tables incluidng all carriages complete 376 labour charges for fixing tubular stainless steel railings in position incl cost of welding and carriages 377 Hire charges for supply and placing in position Plastic chairs including all carriages involved complete 378 Hire charges for supply and placing in position foam chairs including all carriages involved complete 379 Supply and laying of lime as per the directions of Engineer InCharge. 380 Removing of damaged and Providing & fixing of inline Activated Carbon Filter of approved make as directed by Engineer incharge complete. 381 Removing of damaged and Providing & fixing of inline Sediment Filter of approved make as directed by Engineer incharge complete. 382 Removing of damaged and providing& fixing of 100 GPD Motor (Kent booster pump) of approved make as directed by EIC 383 Removing oof damaged and providing & fixing of solonide valve of approved make as directed by Engineer incharge complete 384 Removing of damaged and Providing & fixing of sediment candle 10 of approved make as directed by engineer incharge complete. 385 Removing of damped and providing. No and fixing of Spun Candle 10 of approved make as directed by Engineer incharge complete 386 Removing of damaged and Providing & fixing of Post Carbon Blue of approved make as directed by Engineer incharge complete 387 Removing of damaged and Providing & fixing of Hollow Fiber/postMembrane UF of approved make as directed by Engineer incharge complete. 388 Removing of damaged and Providing & fixing of 20 activated carbon of approved make as directed by Engineer incharge complete. 389 Removing of damaged and Providing & fixing of 20 Sediment Filter Candle of approved make as directed by Engineer incharge complete. 390 Removing of damaged and Providing & fixing of RO Membrane 10 welded of approved make as directed by Engineer incharge complete. 391 Removing of damaged and Providing No & fixing of UV Lamp 11W of approved make as directed by Engineer incharge complete. 392 Removing of damaged and Providing No & fixing of UF Membrane 10 13 (blocked) of approved make as directed by Engineer incharge complete. 393 Removing of damaged and Providing No & fixing of UF Membrane (Open) of approved make as directed by Engineerincharge complete. 394 Removing of damaged and providing N o & fixing of Wiring of approved make as directed by Engineer incharge complete. 395 Removing and damaged and N o providing fixing of Electric Auto flush of approved make as directed by Engineer incharge complete. 396 Removing a n d damaged and providing fixing of FRT of approvedmake as directed by Engineer incharge complete 397 Removing and damaged and providing fixing of PF( Pre filter bowl) of approved make as directed by Engineer incharge complete 398 Providing and fixing 1/2 socket as directed complete 399 Providing and fixing 1/2 plug as directed complete 400 Providing and fixing 1/2 adopter (SMPS) as directed complete 401 Providing and fixing RO Pipe as directed complete 402 Removing of damaged and providing foxing rejecter as directed complete 403 Supply Installation, testing and Commissioning of branded make (kent,livpure, aquagaurd) water Purifier with In-Tank UVDisinfection uto osomg RO+UF+TDS Control Purification process with a storage capacity of 8 liters and output discharges of 15 It/Hr abd abd external prefitted bowl of same brand all complete 404 Upholstery to the sofa sets/single seats by way of removal of wornout polishable regzine, cloths, cushions,linings ,springs etc.and upholstery by new regzine,leather of superior quality ,foam of high densityot appropriate thickness ( for seat, for back support andfor profiling )incl.replacing of demaged springs. (all materials involved to be approved by engineer in charge incl.cost involved for labours for displacement of sofa sets from rooms to working space area and vice versa complete job. the job also involves providing of new heels of approporiate size whereever required 405 P/F of curtains velvet based crewel type/ embroyered silk / cotton nylon mix fabric as directed including stitching charges,cost of eyelets including all carraiges of 1.2m width complete as directed by Engineer incharge 406 Velvet Based crewel type 407 Embroyered silk type 408 Cotton/nylon mix fabric type 409 P/Fcurtain rods of stainless steel of required size & pattern of approved make and stainless steel brackets,stainless steel end brackets of required design & pattern with necessary fittings & fixtures complete as directed by Engineer incharge. 410 Supply wooden roll of Honour board of required size with brass letter writing. (incl. fixing & carriage complete. as directed 411 Supply acrylic roll of Honour board of required size and thickness 5mm with golden letter writing incl. fixing & carriage complete. as directed 412 Clearance & testing of PVC Rainwater pipes, CI pipe network incl joints upto Manholes (rate include two separate operations per year after every six months) by way of removing blockades if any incl disposal of unwanted material repairing of leakages by silicon sealant etc and necessary realignment wherever is required incl. cost of scaffolding etc. at all floor / roof top levels, complete job. 413 Removing of damaged PVC Rain water pipes and Providing and fixing 100 mm P.V.C Rain water Pipes, vent pipes (Prince B-type)ISI mark including all fittings with or without access of any degree ie bends, junctions, cowls, offsets, access pieces, holder bats and clamps for suspended pipes in ceiling, stays, Vertical walls etc and jointing with solvent/seal joints and at all floor / roof top levels including removing of ACP Cladding and refixing the same where required with necessary scaffolding / staging as directed by the Engineer-in-charge. 414 Cleaning & testing of gutters (rate include two separate operations per year after every six months) by way of removing of accumulated debris, vegetation, weeds waste and unwanted material if any incl RM disposal of wherever is required incl. cost of scaffolding etc. at all floor / roof top levels, complete job. (measurement to be taken for Gutter length only) 415 Repair work of gutter joints in (Alluminum as well as GI Troughs) (rate include two separate operations per year after every six months) by way of repairing of trough joints by adhesive Duco putty, silicon sealant (exterior grade etc and incl necessary realignment wherever is required incl. cost of scaffolding etc. at all floor / roof top levels, complete job. 416 Removing of damaged aluminum trough & Providing and fixing of Aluminum gutter (22 gauge) as per design and shape with necessary scaffolding / plate form upto floor 4 levels including cost of necessary screws, sealing of joints by adhesive (Duco putty), silicon sealant etc to make it leak proof all complete. 417 Providing and fixing PVC 2mm thick polycarbonate multiware sheets using 12mm polymer coated hot dip galvanized hexself drilling fastners on each crust of sheets for connection with purlins at 900-900mm centers on all sides and end laps etc Complete job 418 Providing/ fixing aluminum composite sheet cladding (exterior grade) in vertical / horizontal surface using 4mm thick sheet, the sheet shall be bent to shaped profiles as required including perimeter extrusion base frame extruded stiffeners 2.5mm to 3mm ss expansion fastners and silicon sealant (dow coming 789) all backup arrangements required for installations including scaffoldings required upto all floor levels complete job. 419 Providing and fixing of necessry aluminium and stainless steel hardware fittings with necessry screws etc complete in all respects to thesetisfaction of incharge 420 Al fittings 421 handle 250mmx10mm 422 handle 150mmx10mm 423 hadle 125mmx10mm 424 handle 100x10mm 425 stainless steel fittings 426 towe bolt 300mmx10mm 427 tower bolt 250x10mm 428 towe bolt 200x10mm 429 tower bolt 150mmx10mm 430 P/F of fixtures of approved make with necessery sctews extra complete in all respects 431 Brass handle 175mm long 432 SS Butter fly L drop 433 Door stopper 434 bed socket for almirah 435 Removing of damaged and providing and fixing of SS sliding Door Bolts (L-Drop )I S I marked work from with necessary screws etc complete in all respects to the satisfaction of engineer in charge.(200mm ) 436 Providing and fixing of Kadi Tala (6 lever ) 2 in 1 lock with Al-drop of size 200mm ISI marked with colour coated with necessary screws etc complete in all respects to the satisfaction of engineer in charge. (200mm ) 437 Providing and fixing of Capsule type Door Closer with necessary screws etc complete in all respects to the satisfaction of engineer in charge. (200mm ) 438 Removing of damaged and providing and fixing of Aluminum G-Channel of size 50mm ×50mm with necessary screws etc complete in all respects to the satisfaction of engineer in charge.(200mm ) 439 Removing of damaged and providing and fixing of sliding wheels with ball bearing (110mm long ) at top of door and aluminum G- Channel with necessary screws etc complete in all respects to the satisfaction of engineer in charge 440 Removing of damaged and providing and fixing of 10mm dia and 100 mm long geyser bolts on walls by way of drilling of required dia with necessary screws, rawl plugs etc complete in all respects to the satisfaction of engineer in charge 441 Removing of damaged and providing and fixing of uperior quality aluminum fitting for aluminums partition door/ window top hung (quality and pattern to be approved by engineer in charge. 442 Dead Lock six lever (godrej make) 443 Handle (godrej make) 444 FLOOR spring for sixty kg weight (godrej make) 445 Cocks pur handle for top hung 446 Two Bar friction stainless steel 447 P/F of film frost of approved brand and manufacture incl all charges complete job 448 Supplying and installing 1.2mm thick self adhesive HDPE membrane having puncture resistance of 1000N (+/- 5 to 10%as per ASTME 154,tensile strength of 25 MPA as per ASTMD412 Allocation of greater than 500% as per ASTMD 412,Resistance to hydrostatic head greater than 60M as per ASTMD 5385,peel adhesive to concrete 880W/M as per ASTMD 1270,45 days UV exposure test-pass the system should fully bonded the RCC and consists of highly resilient HDPE film ,a pressure sensitive-adhesive layer which covered by a weather proof protective layer the membrane shall have min. of 100mm side and end laps which shall be sealed with double sided adhesive tape. Size of membrane should be 3mtx20m not less than this to minimize the joints the water proof stem should be applied directly y the manufacturer With 10 years of insurance backed system warranty against leakage all complete as per manufacturer specifications. 449 Writingletters and numerals in stickers of matching colour and font for roll of officials as desired by engineer in chargeon wooden boards/acrylic boards 450 20mm 451 25mm-40mm 452 50mm-75mm 453 100mm 454 Writing brass letters and numerals for roll of honour for honble judges and other officials as desired by engineer in chargeon wooden boards 455 20mm 456 25mm-40mm 457 50mm-75mm 458 100mm 459 Chemical washing of sofa sets/ carpets/curtains/blankets/table covers etc using shampoo, detergent and allied chemicals and drying ironing vaccum cleaning if necessery complete 460 Sofa Sets 461 Carpets 462 Curtains/Blankets/Covering cloth 463 Supply of Door mats of required size and make as per the directions of engineer in charge 464 Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot &double action hydraulic floor spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in-charge (Door handle, lock and stopper etc.to be paid separately). 465 P/F toughened Glass door fittings 466 L-Connection 467 Wheel set 468 Steel rod incl. steel cannel 469 Fixed Rod 470 Door Seal 471 Stainless steel 18inch door handle 472 Stainless steel door lock 473 Providing and fixing of PVC/Acrylic Name Plates, Signages etc at various sizes as per the directions of engineer incharge 474 P/F of stainless steel telescopic slide drawer channel 475 12inch 476 16 inch 477 18inch 478 20inch 479 22 inch 480 P/F Toilet Paper Roll holder stainless steel with lid 481 Overhauling of existing tubewell to make smooth functional by way of disassemble and reasemble of jet pump taking out the water suction pipes and cleaning the slush/silt using buky system complete job 482 Cleaning of septic tanks by mechanical means as directed by engineer in charge. 483 Supply ,installation , testing and commissioningof 7.5 HP water lifiting motor including all necessary fittings labour charges / dismentalling of old one with all carriages comlete. 484 Supply ,installation , testing and commissioningof 3.5 HP water lifiting motor including all necessary fittings labour charges / dismentalling of old one with all carriages complete. 485 Supply of Grass cutter Machine (Petrol) 4 stroke 486 Providing and fixing of carpet 12mm thick dust repellent of approved make complete 487 Providing and fixing of mating 12mm thick of approved make 488 P/F of fixtures of foot valve for jet pump approved make with necessery washers etc complete 489 Renovating lawns including weeding, cheeling the grass, forking the ground, top dressing with sludge or manure mixing the same with forked soil, watering and maintaining the lawn for 30 days or more till the grass forms a thick lawn free from weeds & fit for mowing & disposal of rubbish as directed, including supplying good earth if needed but excluding the cost of sludge or manure (the good earth shall be paid separately.) The job shall also include engagement of lawn mover and mechanical grass cutter whatever is required at the site 490 Clearing grass and removal of the rubbish upto a distance of 50 m outside the periphery of the area cleared. 491 Providing and fixing in position polypropylene biodigester (septic tank) incl. excavation cost of jointing and carriages all complete 492 Providing and supplying chair executive type high back, revolving wheel base of chromefinish, with arm. Height adjustablemechanism of best quality, cushions, seat with leatherlite upholstery, the seat back to be with tilt mechanism and the back to be of messed type / cushioned type with leatherlite upholstery. The shade of unit shall be finalized by the concerned authority at the later stage and nothing extra shall be paid for this. The rateshall be all inclusive including installation/transportation 493 Supply ofwooden desk name plates wallnut wood material including engraving polishing of standard size complete 494 Supply ofdecorative four folded room seperator made of imported wood including all polishing finishing complete job 495 Providing and laying at or near ground level factory made kerb stone of M-25 grade cement in position to the required line level and curvature jointed with cement mortar 1:3 (1 cement 3 coarse sand) including making joints with or without grooves (thickness of joint not exceeding 5mm) including making drainage openings whereever required complete ete as per directions (Precast CC Kerb stone shall be approved by engineering in charge ) 496 supplying and providing high back chairs made up of thick hot pressed plywood or plastic and upholstered with fabric upholestry covers and moulded polyurethane foam. Back is made up of injection moulded frame inner frame upholestered with mesh fabric and mounted on the main assembly back adjustable lumbar support for achieving comfortable seating posture 497 Providing and laying chisel dressed Devri Stone of size 300x200 mm face with 150 mm depth in cement mortar 1: 6 (1 cement : 6 coarse sand) upto plinth level including curing.One face dressed 498 Fine chisel dressed 499 Rough chisel dressed 500 Engagement of welding machine including technician and carriage of machine from source to site of work complete job
