|
| 1 | Chipping removing carefully concrete work by low impact hammer, breakar without damaging the structure & cleaning and disposal of debries out side the premises etc complete all as specified and directed. Hard concrete should not be removed by force. |
| 2 | Use and waste of Formwork to sides of pillars,posts, struts, piers,columnsand stanchions complete all as specified and as directed |
| 3 | Providing and applying jacketing arround columns with Micro concrete (Molith-MC) M-40 including all lifts, shuttering, drilling holes and fixing shear Anchor as per specification complete. Note:- Reinforcement shall be measured and paid saperately, (Rates including jacketing, formwork and Micro concrete) |
| 4 | S&F Mild steel TMT bars 10mm dia and over as reinforcement for concrete, cut to length, bent to shape required, including cranking, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed. |
| 5 | S&F Mild steel TMT bars 5 to 10mm dia in stirrups, spacers and binders, cut to length, bent to shape required, including cranking, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed. |
| 6 | Demolition of brick work built in cement mortar or lime mortar complete of any description complete all as specified and directed. |
| 7 | M&L Precast Cement Concrete Block Masonry with Solid Block, exc 10cm in width in type C-1, 1:3:6 (using 20mm graded stone aggregate) set in CM (1:6) complete all as specified and directed. |
| 8 | Taking down cement plaster on Brick / Concrete surfaces incl raking out joints, hacking for key scrubbing down with water and Removing Rubbish out side of the MD Land complete all as specified and directed. |
| 9 | M&L Rendering 15 mm thick cement plaster on concrete solid block walls in two coatsfirst coat of 10 mm in CM 1:4 & 2nd coat of 5mm in CM 1:4 mixed with integral water proofing compound finished to even & smooth w/o using extra cement complete all as specified and directed.Note :- Integral water proofing compound will be measured and paid seperately. |
| 10 | M&LRendering 10mm thick on internal sides wall of Brick / Concrete Surfaces in CM (1:6) finished even & smooth without using extra cement complete all as specified and directed. |
| 11 | M&L rendering 5mm thick in CM 1:3 on fair faces of brick work or concrete surfaces in ceiling finished even & smooth without using extra cement complete all as specified and directed. |
| 12 | M&L for application of high build polymer cement sand mortar 1:2.5 with water cement ratio 0.35 to 0.45 mixing with Nito bond SBR @ 5 ltrs per 50 Kg cement on ceiling / chajja surfaces 10 to 20mm thick in two layers over slurry priming coat of 1 volume Nito bond SBRto 1 volume water, 3 volume fresh cement (5 sqm per litre Nito Bond SBR) etc all as per manufacturers instructions, including painting/finishing to match with the existing complete all as specified and as directed. |
| 13 | M&L preparation of newly plastered surfaces of walland applying two coats of Oil Bound distemper over a coat of primer over a coat of internal wall care putty complete all as specified and directed. |
| 14 | M&L preparation of newly plastered ceiling surfacesand applying two coats of Oil Bound distemper over a coat of primer over a coat of internal wall care putty complete all as specified and directed. |
| 15 | M&L preparation of old plastered surfaces of walland applying two coats of Oil Bound distemper complete all as specified and directed. |
| 16 | M&L preparation of old plastered ceiling surfacesand applying two coats of Oil Bound distemper complete all as specified and directed. |
| 17 | M& L for Finishing walls (new/old) with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) etc complete all as specified and as directed. |
| 18 | Dismantling of floor, hearth or wall tiling including cement mortar bedding (but not backing) and removing the rubbish off the premises complete all as specified and directed. |
| 19 | M/L 25mm thk PCC 1:2:4 type B-0 using 12.5 mm graded agg as in flooring finished fair and even without using extra cement complete all as specified and directed. |
| 20 | M&L Glazed ceramic coloured/ printed tiles (450X300mm) x6-7mm thick on vertical surfaces as in skirting/dado,set and jointed with neatcement slurry and pointed in white/coloured cement to match the shade of tiles over and including 10mm thick rendering in cement mortar 1:4 complete all as specified and directed. |
| 21 | M&L Light shade Vitrified ceramic tiles 10mm thick (Square/rectangular) area of each tile n exc 0.36 Sqm, in floors etc set and jointed in neatcement slurry and pointed in white or coloured cement to match over and including15mm thick screed bed in cement mortar (1:6) all as specified and directed. |
| 22 | All as per item No. 21.00 above but in skirting/dado laid over and including10mm thick cement plaster in cement mortar 1:4 complete all as specified |
| 23 | M&L Dark shade Vitrified ceramic tiles 10mm thick (Square/rectangular) area of each tile exc 0.42 sqm & n exc 1.00 Sqm, in floors etc set and jointed in neatcement slurry and pointed in white or coloured cement to match over and including15mm thick screed bed in cement mortar (1:6) complete all as specified and directed. |
| 24 | Dismantling of stone slabs and tiles of anydescription or thickness in floors, approns and laid bedded and pointed in any mortar etc complete all as specified and directed. |
| 25 | M&L Granite 18-20 mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed. |
| 26 | M&L PCC 100 mm thick using 1:3:6 type C2 (40 mm graded stone aggregate) as in flooring/Hardstanding complete all as specified and directed. |
| 27 | M&Lscreed bed or bedding layer of mortar 20 mm thick cement plaster 1:4 for laying floor finished to receive floor tiles complete all as specified and directed. |
| 28 | M&L coloured chequered finish endura tiles 10-12 mm thick (square /rectangular) textured series area of each tile exceeding 0.07 sqmnot exceeding0.18 sqm as in floors, treads and risers of steps fixed with white cement and pigment laid over and including 20 mm thick screed in CM 1:4 complete all as per manufacturer instructions complete all as specified and directed. |
| 29 | Demolition of cement concrete (un-reinforced) of any description and in any position not otherwise specified complete all as directed.(plinthprotection) complete all as specified and directed. |
| 30 | M & L for water proofing treatment with the following specifications including taking down existing roof treatment of any description and cleaning with water and scrubbing and disposing off the rubbish outside the premises, complete all as specified and as per manufacturers instructions:-(i)Rendering 10mm thick in CM 1:4 on concrete surfaces mixed with water proofing compound @ 3% by weight of cement as leveling course (ii)Apply a coat of hot blown bitumen 85/25 @ 1.20 kg/sqm over a coat of bituminous primer @ 0.3 ltr per sqm.(iii)Laying APP membrane (STP Aquashield or equivalent) weighing not less than 3.5 Kg/sqm, reinforced with polyster non woven fabric (weighing not less than 150 gms/sqm) with 100mm over laps both longitudinally and transversally and overlaps shall be sealed by torch, membrane shall be taken to the parapet through fillet and shall be tucked in inside after a height of 300 mm.(iv) Apply one coat of hot blown bitumen 85/25 @ 1.2 kg/sqm over the membrane.Note :- Water proofing compound shall be measured and paid separately. |
| 31 | Supply only Liquid water proofing compound. |
| 32 | Taking down chowkats or frames exceeding n exc 1.5 sq. m each (Without taking off shutters & Grill from the frame) complete all as specified and directed. |
| 33 | Taking down chowkats or frames exceeding exc 1.5 sq. m but n exc 4 sq. meach (Without taking off shutters & Grill from the frame) complete all as specified and directed. |
| 34 | S & F Powder coated aluminium frame for doors, windows, ventilators with one or morerebates including joining cleat forfixing etc. complete all as specified and directed. |
| 35 | S & F Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings and the directions of Engineer-in-charge. |
| 36 | Supply only 5.5mm thick sheet glass, ordinary quality in squares exc 0.50 sq.m in each pane complete all as specified and directed. |
| 37 | Supply only 4.0mm thick Sheet glass ordinary quality and glazing with oil putty in Square n.exc 0.5sqm in each pane complete all as specified and directed. |
| 38 | M&L for 12 mm thick prelaminated particle board to fixed in repair interior grade prelaminated one side with decorative choice lamination and other side balancing white lamination fixed with screws to timber frame work complete all as specified and directed. |
| 39 | S&F 100 mm Butt hinges extruded aluminium alloy, anodised. With galvanished mild steel hinge pin , anodised and fixed type B-21 complete all as specified and directed. |
| 40 | S&F 200mm Aluminium anodised barrel tower bolts of extruded sections complete all as specified and directed. |
| 41 | S&F 150mm Extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed. |
| 42 | S&F Aluminium alloy anodised sliding door bolt with hasp, staple (bolt type) 300 mm long and fixing clips to sheet cast or extruded sections and fixing bolt or cast aluminium alloycomplete all as specified and directed. |
| 43 | Taking up or down, 25mm dia bore, GI tubing, medium grade, including cleaning for refixing or removing from site, complete all as specified and as directed |
| 44 | Taking up or down, 40mm dia bore, GI tubing, medium grade, including cleaning for refixing or removing from site, complete all as specified and as directed |
| 45 | Supplying and laying of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified of dia 25 mm complete all as specified and as directed |
| 46 | Supplying and laying of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified of dia 40 mm complete all as specified and as directed |
| 47 | Taking down PVC waste ,vent,rain water pipes incl fittings in any position complete all as specified and as directed |
| 48 | S&F110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall complete all as specified and as directed |
| 49 | S&F110mm dia PVC (SWR) bend complete all as specified and as directed |
| 50 | S&FStack clamps out of 50mm by 5 mm flat ironand 16mm dia roundiron stays, includingbolts and nuts andsecuring ends of stays towall or rooffor 100 mm dia pipe complete all as specified and as directed |
| 51 | S&F in repairs Gun Metal Gate valves 20 mm dia with iron wheel head screwed both ends for iron pipes complete all as specified and as directed |
| 52 | S & F in repairs1000 litres capacity Rotational moulded polythene water storage tanks(cylindrical vertical with closed top) hoisted in position incl 20 mm dia brass float valve complete all as specified and as directed |
| 53 | Dismantling wrought iron or mild steel work of any description not otherwise provided complete all as specified and as directed |
| 54 | M & L Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc.con- forming to Fe.290.Gde-E-165 quality-B complete all as specified and as directed. |
| 55 | S&F Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment etc and fixed by riveting or welding or with nut and bolts (including nuts and bolts) conforming to Fe-410-W grade E 250 Quality B complete all as specified and directed. |
| 56 | S &F MS work in wind ties for roof including securing bolts complete all as specified and as directed |
| 57 | Dismantling Plain or corrugated steel sheeting any gauge, thickness, including Nainital or similar pattern roof coverings in roof covering complete all as specified and as directed |
| 58 | S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, including cranking to shape as specified and fixed with self tapping screws complete all as specified and directed. |
| 59 | S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws asin ridges, hips, valley gutter, drip, and straight flashing all as specified and as directed. |
| 60 | M&L Painting two coats of synthetic enamel paint over a coat of red oxide including preparation of new steel surfaces of any description over 10cm in width or girth not other wise described complete all as specified and directed. |
| 61 | S & F in repairs sink with drainage board, made up of stainless steel, 1mm thick for kitchen or laboratory with plug, waste pipe, washer, including bedding in cement mortar 1:3 into dwarf wall or cantilever brackets and connecting union to pipe, over all size915mm x 460mm bowl size 410mm x 330mm x160mm etc, complete all as specified and as directed. |
| 62 | S&F in repairs Bib tap cast copper alloy chromium plated 15mm dia with fancy type screwed down screwed for iron pipe or brass ferule etc complete all as specified and as directed by Engineer-in-Charge |
| 63 | Demolition of cement concrete reinforced of any description and in any position complete all as specified and as directed. |
| 64 | Dismantling of Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets Including frame of any description and any thickness, fixed in any position . |
| 65 | S&F Steel works In tubular/ posts/ trusses/ purlin including special shaped washer etc.complete using ERW or induction butt welded tubes conforming to IS 1161-1797 grade St 240 complete all as specified and as directed |
| 66 | S&F Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts,if required: hooks (stay),heavy,for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securingpurlinstowood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and directed |
| 67 | S&F Plain, Aluminium sheeting 0.56mm thick,Alloy 31000 H4 in ridges, hips, valley gutter, drip and straight flashing (length and girth as fixed) complete all as specified and as directed |
| 68 | Material and labour for false ceiling with aluminum grid work (Size of grid 600x600 mm) with 35 x 25 x 1.5 mm main tee and 25 x 25 x 1.4 mm cross tee and wall angle and suspended with 2mm dia GI wire hooked to roof with needful adjustment bolts at an interval of 1.20 m centre to centre staggered and board with Eco board decorative type size 600 x 600 x 4 mm thick finished with two coats of oil bound distemper over a coat of primer on exposed surfaces all as specified and directed |
| 69 | M&L for 100 mm thick cementconcrete type D2, 1:4:8 (using40mm gradedstone aggregate) in sub base of flooring/hard standing,Path way complete all as specified and as directed |
| 70 | M&L for 40 mm thick cementconcrete flooringtype B1, 1:2:4 (using20mm gradedstone aggregate) over sub base complete all as specified and as directed |
| 71 | Forming 12 mm thick expansion joints filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound, Grade `A\" for 100 mm thick slab complete all as specified and as directed. |
| 72 | M&L for preperation of old painted steel surfaces over 10 cm in width or girth andapplying one coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 73 | M&L for preparation of surfaces by brooming down old decorated ,old plastered or unplastered surfaces of walls and cornices complete and applying two coat of white wash all as specified and directed. |
| 74 | M & L for complete removal of existing treatment on old plastered surfaces of wallsand applying Two or more coatsof 100% Premium acrylic emulsion paint havingVOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance,dirt resistance exterior paint of required shade(Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm complete all as specified and directed. |
| 75 | S&F Safety Lever locks mild steel with 4 levers for rolling shutterscomplete all as specified and as directed. |
| 76 | S&F Ball Bearing for rolling shutters complete all as specified and as directed. |
| 77 | Dismantling of existing steel rolling shutters of any type including top covers for repairs & refixing in the same opening after repairs including greasing the spring, guide channel shafts, bearing, bolts, washers, including repairing defective laths spring bearing , hood cover, guide channel suspension shafts etc complete as directed by Engr-in-Charge for rolling shutter of eachNote:- Necessary Safety lever locks & Ball bearing will be measured & paid seperately. |
| 78 | Taking down carefully aluminium point wiring(light, fan, socket or power) DBs complete offering credit, making good disturbed surfaces of walls, floors, etc, all as specified and as directed. |
| 79 | M&L Point wiring complete with 1.5 sqmm single core FRLS PVC insulated andunsheathed cable 1100 volts grade with multistranded copper conductor drawn through and including concealed PVC conduit and all accessories fixed to walls / roofs / floors / ceiling etc. and including provision of 1.5 sqmm copper cable green in colour as earth continuity conductor and connected to common earth dolly, including fabricated steel terminal box made out of 1.60mm thick MS sheet concealed in walls, with 3mm thick laminated sheet top cover for housing the switches, socket outlets,fan regulators etc., all as specified and as directed forthe following:- (a) One light/bell point controlled by one switch |
| 80 | (b) One exhaust fan point controlled by one switch |
| 81 | (d) One fan point controlled by one switch and one regulator |
| 82 | (e ) One 3 pin switch socket outlet point 5 amps on same board with other switches |
| 83 | (f) One 3 pin switch socket outlet point 5 amps on independent board |
| 84 | All as per item No 79 here-in-before but for 3 pin 15 Amps switch socket combination on independent board with 4 sq mm copper cable and provision of 4 sq mm FRLS PVC insulated stranded copper conductor cable for earth continuity conductor connected to common earth dolly connecting upto fittings complete all as specified and as directed. |
| 85 | Supply and fixing Modular switch 1 way 5 A, 1 module all as specified and directed. |
| 86 | Supply and fixing Modular switch 1 way 15 A, 1 module all as specified and directed. |
| 87 | Supply and fixing modular socket outlet, 2/3 pin combined , 6/16 Amps, combined 2 module, 230 volts all as specified and directed. |
| 88 | Supply and fixing modular socket outlet, 2/3 pin combined , 6 Amps, combined 2 module, 230 volts all as specified and directed. |
| 89 | S & Fmodular white cover plate with frame, 3 module all as specified and directed. |
| 90 | S & Fmodular white cover plate with frame, 4 module all as specified and directed. |
| 91 | Supply and fixing modular fan step regulator, 230 V, AC, 120W - 2 module |
| 92 | Supply and fix ceiling rose surface bakelite 65x50mm 3 terminal complete all as specified and as directed. |
| 93 | Taking down old serviceable ceiling fan 1200 mm sweep by disconnecting the electric power supply, unscrewing the bolts and nuts, removing the blades and bearing including scrapping of old paint and applying two coats of synthetic enamelled white paint over a coat of red oxide primer complete and refixing back at site with new clamps, nuts, washers & bolts including cotter pin for complete all as directed. |
| 94 | Supply and fix exhaust fan suitable for on working of AC 230 V, 50 HZ 300 mm sweep light duty , with metal body complete all as specified and as directed. |
| 95 | Supply and fix in repair metal enclosure distribution board TPN, 4 way 415 volts, with 200 amps rated bus bar, with IP 43 protection and double door, suitable for mounting MCBs, including taking down old MCB/DB, complete all as as specified and as directed.Make :Legrand/C&S/L&T Note:- Incoming & Outgoing connections from the DB shall be provided with proper lugs/thimbles etc... |
| 96 | Supply and fixMCB single pole240 volts, 6 to 32 amps \"C\" series complete all as specified and as directed. |
| 97 | Supply and fix in repair MCB triple pole and neutral 63 amps B series complete all as specified and as directed. |
| 98 | Supply and fixing energy efficient aluminium housing LED batten 22 /20 Watt mounted battenfitting 4ft in length nano diffuser technology to ensure minimum loss in light transmitted, long life of over 30000 hours includinglamp and connecting with twin core shethed cable from fitting to ceiling rose all as specified and as diected. |
| 99 | Supply and fix recess mounted LED 12 w Round type downlighter with die cast aluminium housing coating prewired upto connection block and connecting with three core PVC copper flexible cable from ceiling rose to connector block, including taking down old unserviceablefitting of any wattage, complete all as specified and directed. |
| 100 | S & F LED spot light fitting 7 Watt, 3000khousing square/round shaped Recess mounted LED slim panel with PMMA diffuser including high efficiency electronic driver complete with LED lamp, prewired upto connection block and connecting with three core PVC copper flexible cable from ceiling rose to connector block, including taking down old unserviceable spot fitting of any wattage, complete all as specified and directed. |
| 101 | S & F Wall light suitable for LED Lamps upto 20 Watt of B22 base,white colour provided with high output diffuser and metal base, prewired upto connection block and connecting with three core PVC copper flexible cable from ceiling rose to connector block, including taking down old unserviceable wall light fitting of any wattage, complete all as specified and directed. |
| 102 | S&F 25 W New genration energy saving & envoirmental friendly long life versatile pressure dia cast aluminium IP65 road way luminaire with high power LEDs as light and electronic driver complete with necessary brackets (made out of 25 mm bore GI light grade pipe approx. 0.6 M long) nuts, bolts etc to be fixed as on walls complete as directed. |
| 103 | M&L for earthing complete with galvanised steel earth plate electrode 60 x 60 cm x 6mm thick buried directly in ground (earth pit not less than 2.25 M deep below ground level) with top edge of the plate not less thab 1.5 Meter below normal ground level connected to GI wire 4 mm dia by means of bolts, nuts , check nuts and washers of GI and GI tubing 20 mm bore light grade for earth lead protection up to main earth test point and including concrete pit in PCC (1:3:6) type C1 pre cast RCC (1:2:4) type B1 cover slab 54 x 54 x 5 cm with one handle for lifting made out of 8 mm dia MS bar, wire mesh, 20 mm bore GI tubing (LG) for watering, charcoal or coal and salt in alternate layers including excavation earth work complete all as specified and directed electrical plate No. 3 of SSR part - I |
| 104 | M & Lin repairs for sub main wiring complete with two runs of 4 Sqmm FRLS single core PVC insulated single core cable 1100 volts grade, multistranded with copper conductor (ISI Marked) drawn through and including PVC conduit and all accessoriesfixed to wall/ roofs/ floors etc with one run of 4 sqmm FRLSsingle core multistranded copper conductor as earth continuity conductor, including dismantling unserviceable sub main wiring including accessories,complete all as specified and as directed. Note : (1) Two runs of cable one run of conduit & one run of earth continuity conductor shall be measured as one running metre. |
| 105 | Supply & LayXLPEinsulated,heavy duty 1100 volt grade electricarmoured LT UG cable with aluminium conductorof size 16 Sqmm 4 Core in trenches/along the wall/including making all connections, saddles, spacers including scaffolding if any required for saddling the cable in walls of building of height up to 25 meter, complete with aluminium lugs as required at site and as directed. |
| 106 | Excavating in trenches, n exc 1.5 m wide and n exc 1.5m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sqm on plan and n exc 1.5 m in depth and getting out Soft/loose Soil |
| 107 | Returning, filling in, including spreading, leveling watering and well ramming in layers not exceeding 25cmsoil / hard dense soil. |
| 108 | Removing excavated material not exceeding 50m and depositing where directed at a level not exceeding 1.5 m above the starting point.Soft Soil / hard dense soil |
| 109 | Supply & lay cable protection pipe of HDPE double wall corrugated (DWC) incl couplers,bends etc of size 50 mm OD and ID 38mm confirming to IS 14930 -II and ISI Marked all specified and directed. |
| 110 | M&L GI pipe light grade of size 50mm with all fittings complete laid in trenches complete all as specified and directed. |
| 111 | Material and Labour for cutting bituminous road at a width not more than 30cm and a depth not exceeding 60 cm for laying of pipes on road crossing for cable protection and making goodwith cement concrete 1:2:4, type, B-2 to match the existing surfaces of the road all as specified and as directed by Engineer in charge. |
| 112 | Supply, lay/fix, connect and testing steel water tubing of 25 mm bore, medium grade, galvanised with screwed and socketed joints, in any length, including supply and fixing all fittings and fixtures,Clamps and fixed to wall/ceiling or laid on floors including taking down of old unserviceable pipe complete all as specified and directed. |
| 113 | S&F in repairs gunmetal gate or globe valve for 25mm dia, conforming to IS-778, ISI marked, with iron wheel head screwed at both ends for iron pipes or ferrule and fixing including necessary fittings like unions, check nuts, etc and any addition / alteration required for fixing, complete all as specified and as directed. |
| 114 | Supply and fix 25 mm dia ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed, complete all as specified and as directed |
| 115 | Supply, Laying in trenches and connecting LT underground cable of size 4 Core 10 Sqmm XLPE insulated armoured and PVC sheathed 1100 Volts grade with aluminium conductor multistranded including cable connecting lugs, glands.jointing materials etc., laid in trenches, floors, roof, ducts and fixing using clamps, saddle for pole, wall complete all as specified and directed. |
| 116 | Supply, Laying in trenches and connecting LT underground cable of size 2 Core 10 Sqmm XLPE insulated armoured and PVC sheathed 1100 Volts grade with aluminium conductor multistranded including cable connecting lugs, glands.jointing materials etc., laid in trenches, floors, roof, ducts and fixing using clamps, saddle for pole, wall complete all as specified and directed. |
| 117 | S&F Decorative light mounting dia 60mm OD width 200mm and height 227 mm made up of high grade unbreakable poly carbonate material suitable for retrofit LED lamp Base B22,with 7W LED yellow colour /warm white bulb |
| 118 | S&F for Pedastal suitable for fixing the LED light fitting made up of aluminium alloy casting of size of pedastal complete all as specified and directed. |
| 119 | S&F FRP junction box of inner size 140x140x95mm, light weight including 32 amps 4 way Connector block for loop in and out of cable, fixed on poleWal/ Panel using necessary fasteners complete all as specified and directed. |
| 120 | Supply and fix Electric water heater storage type ( GeySer ) steel body with with copper inner tank and heating element upto 2 KW capacity, 25 Ltr, BEE 5 star rated including inlet and out let connection with hot and cold pipe lines complete with all accessories such as safty valve, thermostate, NRV, connection pipe etc alll as specified and direcetd |
| 121 | S&F sheet metal enclosures Loadline DB TPN, 4 ways 415 volts, with 200 amps rated bus bar, with IP 42 protection and double door complete all as specified and as directed |
| 122 | Supply and fix MCB TPN 415 volts, 40 Amps, all as specified and as directed. |
| 123 | Supply and fix MCB single pole, 240 volts, 5 to 32 Amps, all as specified and as directed. |
| 124 | Supply and fixing Single pole and neutral enclosure with a two pin and earth plug andsocket complete with onesingle pole MCB of 20 Amps |
| 125 | Supply and install hi wall split units indoor/outdoor complete with cordless remote control unit and with in built air ioniser and Plasma filter for better indoor air quality with minimum 5 star rating and EER 3.2.of capacity 2.0 TR including outdoor stand for fixing of suitable size complete all as specified and as directed. |
| 126 | Supply and Install Voltage stablizer for automatic operation single phase naturally cooled indoor type & designed for input variation between 170V to 250 V which out put voltage stablizer 230V with accuracy of 2.5% and capacity 5 KVA complete all as specified . |
| 127 | S&F of PVC conduit drain pipe with accessories of size 20mm for drain out complete all as specified and as directed. |
| 128 | Supply and fix switch piano flush button single pole oneway 5 amp complete all as specified and as directed. |
| 129 | Supply and fix switch socket combination 2 in 1, 3 pin (multi pin) 5 amp flush/box type complete all as specified and as directed. |
| 130 | Supply and fix switch socket combination 2 in 1, 3 pin (multi pin) 5 and 15 amp flush/box type complete all as specified and as directed. |
| 131 | Supply and fix metal enclosure distribution board SPN, 8 way 240 volts, with 200 amps rated bus bar, with IP 42 protection and double door suitable for mounting MCBs including taking down old MCB/DB complete all as specified and directed.Note-: Incoming & outgoing connections from the DB shall be provided with proper lugs/ thimbles etc |
| 132 | Supply and fix MCB SPN 230 volts, 40Amps, breaking capacity 10KA B seriesall as specified and as directed. |
| 133 | Supply and fix MCB SP 230 volts, 5 to 32 ampsAmps, breaking capacity 10KA B seriesall as specified and as directed. |
