|
| 1 | Demolition of brick work built in cement mortarincluding all quoins arches, pillars etc but including ashalr facing dressed stone work and precast concrete articles complete all as specified and as directed |
| 2 | Demolition of cement conc (un reinf) in ground floor and pavings not exceeding 15 cm thick above or below ground level complete all as specified and as directed |
| 3 | M&L brick work , with sub class \"B\" bricks built in cement mortar 1:6 straight or curved on plan exc 6mtr mean radius, using old size bricks complete all as specified |
| 4 | M&L Reinforced cement concrete (nominal mix) TypeB0 1:2:4 (12.5mm graded aggregate) inslabs supported on walls, beams, columnsdeck slabs and in shelves, the like all as specified and directed by Engineer - in - Charge . |
| 5 | Taking down cement plaster on brick/concrete surfaces including racking out joints, hacking for key, scrubbing down with water etc.complete all as specified and directed. |
| 6 | M&L for rendering 15 mm thick in CM 1:6 on brick or concrete wall surfaces and surface finished even & smooth w/o using extra cement complete. |
| 7 | M&L for rendering 15 mm thick in CM 1:4 on brick or concrete wall surfaces and surface finished even & smooth w/o using extra cement complete. |
| 8 | M&l for 5 mm th rendering in cement mortar in 1:3 on ceiling complete all as specified and as directed |
| 9 | M&L preparing surfaces ofnewwalls and applying two coats of oil bound distemper over a coat of alkali primercomplete all as specified. (Note- OBD to be done by Roller) Make- (Asian, Berger, nerolac) |
| 10 | M&L preparing surfaces new of walls and applying two caots of cement base paint over a coat of alkali primercomplete all as specified (Note- CBP to be done by Sprayer) Make- (Asian, Berger, nerolac) |
| 11 | M&L for three coats of white wash on newly plastered surface of ceiling incl preparation of surfacecomplete all as specified |
| 12 | M&L for preparation of old decorated brick/concrete plastered or unplastered/un-plasteredsurfaces of walls incl pillars, cornices etc booming down with steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts, trading oil, graeacy spots etc and applying one coat of white (lime) washcomplete all as specified. (ht may vary upto 10.00mtr ) |
| 13 | All as per item No 12 above but applying one coat of lime white wash on ceiling complete all as specified and directed. |
| 14 | M&L for preparation of old painted wooden surfaces of any description over 10 cms width or girth and applying one coat of synthetic enamel paint on wooden surfaces complete. |
| 15 | M&L for writing letter of figures (block, Roman,ltalic, or Indian) n. exe 30 cm high (not in index hands/natural size) on buil;ding/ notice boards, including prepration and cleaning etc complete all as specified. |
| 16 | M& L for repair to chajja, facias,balconeis, roof/parapet projections with 15mm thick in cement plaster mortar 1:3 at any height of building including necessary arrangment like scaffolding and safty precautions etc complete all as specified and directed. (Note : Contractor shall be responsible for any accident, mishap, damage to life and material and insurance of workmen etc |
| 17 | M&L for preparation of old painted steel surfaces of any description over 10 cms width or girth and applying one coat of synthetic enamel paint on steel surfaces in simple complete all as directed |
| 18 | M & L perparation of old decorated plastered surfaces of wall and cornics by complete removal of existing treatment by applying water and scrapping of entire thickness of existing treatment withusing steel scraper and thereafter applying applying two coat of oil bound distemper over and including wall care putty to achieve smooth finishovera coat of appropriate primer complete all as specified and directed by Engr-in-Charge. |
| 19 | M&Lfor complete removal of old decorated brick/concrete plastered or unplastered/un-plasteredsurfaces of walls incl pillars, cornices etc booming down with steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts, trading oil, graeacy spots etc and for Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) with colour scheme change completeall as specified and directed |
| 20 | M&L Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer\"s specification two or more coats on new work after applying 2 mm thick plaster of paris putty to prepare the surface even and smooth complete all as specified. |
| 21 | Taking down Wooden chowkhats or frames with shutters without taking off shutters from the frame not exceeding 1.5 Sqm each andall as specified and directed by Engineer - in - Charge. |
| 22 | Taking down Wooden chowkhats or frames with shutters without taking off shutters from the frame exceeding 1.5 Sqm but not exceeding 4 Sqm each andall as specified and directed. |
| 23 | Taking down shutters of any description exc 1sqm each and not exc 2.00 sqm each complete all as specified and as directed |
| 24 | Taking down shutters of any descriptionsize exceeding 1 sqm and n.exc 2 sqm but refixing in the same opening complete all as specified and as directed. |
| 25 | Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N(Face) & 1100 N (Edge), minimum comp-ressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant152 SECTION 8 and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames,minus 5mm tolerance in dimension i.e.depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. complete all as specified and as directed |
| 26 | Supply and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer- In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately complete all as specified and as directed. |
| 27 | S & F for Anodised aluminium window and ventilator shutters,Powder Coating (minimum thickness of powder coating 50 micron) fixed type without sash bar,hook and eye closure Each door having 02 Nos D type handles, 02 Nos aluminium tower bolts 300 mm size,aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified |
| 28 | S & F for Anodised aluminium window and ventilator shutters,Powder Coating (minimum thickness of powder coating 50 micron) sliding with three channel section, aluminium sections weighing 0.55 kg/m including necessary joining cleats,hook and eye closure,Each door having 02 Nos D type handles, 02 Nos aluminium tower bolts 300 mm size, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified |
| 29 | S&F anodised aluminium framepowder coated with minimum thickness of powder coating 50 micron for doors, windows, ventilatorswith one or more rebates including joining cleat for fixing, hinges etc. complete all as specified. complete all as specified and directed. Note:- Prelaminated partical board and sheet glass/wiremesh shall be measured and paid for separately. Make:- INDAL/HINDALCO/JINDAL. |
| 30 | S&F anodised aluminium door shutters, powder coated (minimum thickness of powder coating 50 micron) aluminium section weighing 0.55 Kg/m ncluding necessary joining cleats,glazing clips, ruber neoprene packing, handles 2 Nos in each door, 2 Nos tower bolt of size 200 mm, hinges, anodised aluminum snap beading screws etc with chowkhat complete all as specified. |
| 31 | M&L for aluminium framed work such as grill, grating etc with end of bars rivetted or screwed with stainless steeland rivetted etcall as specified & directed |
| 32 | S & F 4.0 mm thick glass sheet ordinary quality glazing fixing in aluminium frame black or transparent in square n.exc0 .5sqm in each pane all as specified and directed by Engineer-in Charge |
| 33 | S & F 4.0 mm thick glass sheet ordinary quality glazing fixing in aluminium frame black or transparent in square exc0 .5sqm in each pane all as specified and directed by Engineer-in Charge |
| 34 | S&F 4 mm th Prelaminated particle board, exterior grade, prelaminated both side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame workcomplete all as specified and as directed by engineer-in-charge. |
| 35 | S&F 30mm thick flush shutter solid core constructionwith block board core and decorative face panels veneer with lipping/frame to match on both faces complete all as specified and as directed |
| 36 | S&F in replacement 20 mm dia harrison rails stainless steel grade 304 , with fixing brackets , stops, rollers complete all as specified and as directed (two brackets per 1.5 M length and 08 Nos roller per 1.RM) |
| 37 | S&F Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed. |
| 38 | S&F MS sliding door bolt ,plate type, 300 mm long stove enameled black with bright bolt not less than 12 mm dia with and including a minimum of 6 Nos of bolts and nuts, four on bolt plate and two on staple plate and all as directed. |
| 39 | S&F MSpressed handle ,oval type,stoved enamelled black 125mm long complete. |
| 40 | S&F MSbarell towerbolt, stoved enamelled black, with bright bolt 150mm long complete. |
| 41 | S&F in repair Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed. |
| 42 | S & F aluminium anodised tubular towel rail 20mm dia “D” type 60 cm long between flanges incldg brackets complete all as specified and directed by Engineer - in - Charge . |
| 43 | S&F in repairs PVC mirror cabinet (440 x 325 x 120mm) and fixed to wall after taking down old mirror all as specified and directed. (Make : SANYA/JINDAL) |
| 44 | S&F in repairs 19mm thick prelaminated particle board, exterior grade, prelaminated both side with decorative choice laminated as in cupboard, shelves in kitchen etc complete all as specified and directed. |
| 45 | Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening conforming to GdeFe 290(Gde E-165) |
| 46 | S&F in repair helical door spring 300mm long ordinary rat tail rod pattern including roller and roller plate and welding if reqd complete all as specified |
| 47 | Dismantling water tanks of any description exc 250 and n.exc 500 ltr capacity |
| 48 | S&F Rotational moulded polythene water storage tanks double layer (cylinder each vertical with closed top) of capacity 500 Itrs, hoisted and fixed in position including pvc float valve 20mm size,specified in SSR Pt-1 Make : Sintex / Frontier /Polycon |
| 49 | Disconnecting existing tanks of 500 ltrs, setting aside and (or lowering if required) for Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etcrepairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position. |
| 50 | Taking down steel water tubing 15mm bore and connections incl cleaning for refixing or removing to store. |
| 51 | –Ditto- but 20mm bore tubing. |
| 52 | S&F tubes medium grade galvanized 15mm bore with all fittings and fixed complete to walls, ceilings or laid in floors etc complete. |
| 53 | -Ditto- but 20mm bore tubing. |
| 54 | S&F in repair 20mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe complete fixed as in repairs. Make : Paryag. |
| 55 | S&F in repair 15mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe complete fixed as in repairs. Make : Paryag. |
| 56 | Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting n. exceeding 20cm girth |
| 57 | S&F in repair stop valves15 mm, concealed type cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for union and fixed.(Make- Jaguar, parko , Marc) |
| 58 | S&F in repair pillar taps 15mm dia , cast copper alloy , with capstan heads ,chromium plated , screwed down high pressure , with long screwed shanks and fly nuts , screwed for iron pipe and all as specified and directed.(Make- Jaguar, parko , Marc) |
| 59 | S&F in repair bib taps , 15mm dia cast copper alloy chromium plated , with crutch or butterfly handle , screwed down , screwed for iron pipe or for brass ferruleand all as specified and directed.(Make- Jaguar, parko , Marc) |
| 60 | S&F waste coupling of PTMT 32/40 mm dia half or full threaded for WHB all as specified and directed. |
| 61 | S & F in repair Brass chromium plated shower rose 125mm size including fixing to pipe or union with shower arm complete all as specified and directed.(Make- Jaguar, parko , Marc) |
| 62 | S & F corner shelf of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 300gms)complete all as specified and directed. |
| 63 | Towel Rail 600mm long of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats. (Minimum weight 190gms)complete all as specified and directed. |
| 64 | S&F PVC connections 15mm size with PTMT nuts of length 450 mm and all as specified and directed Make : Prayag. |
| 65 | S&F Sinks made of stainless steel 1mm thick kitchen or laborotory with plugs , washers and wastes including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe , over all size 495mmx 420mm bowl size 410mm x 330mmx 160mm complete all as specified and directed.(Make- Prayag, kobra, neelkanth) |
| 66 | S &F in repairs PVC waste pipe of standard pattern not less than 75cm long 32 mm/40mm dia for WHB/steel sink waste coupling or suitable size complet all as directed. |
| 67 | S & F in repair PVC 10 ltrs syphonic action type flushing cistern, low level with inlet, ball valve, float and handle including brackets, flush pipe of PVC 32mm bore, connection to WC pan & PVC connection 15mm size with PTMT nuts of length 300mm complete all as specified . |
| 68 | S&F in repair plastic seat cover white closed pattern with flat bottom and MS chromium plated or aluminum hinges devicefor EWCcomplete all as specified. |
| 69 | S&F in repair CP brass jet spray with flexible pipe 1.50 M long fixed for EWC suitable for 15mm bore of pipe complete all as specified |
| 70 | S&F in repairs spindle brass for concealed stop cock 15mm bore size complete all as specified |
| 71 | Dismantling floor /Wall tiles including cement mortar bedding, removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 72 | M&L for Virified Ceramic tiles dark shade 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match etc all as specified over 15 mm th screed bed or bedding layer in CM (1:6) complete all as specified and directed by Engineer-in Charge (Make- Kajaria, somany, orientbell) |
| 73 | M&L for Glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to matchover 10 mm thick in CM 1:4 Complete all as specified directed.(Make- Kajaria, somany, orientbell) |
| 74 | M&L for 20 mm th Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified includingScreed bed or bedding layer of mortar 20 mm thick in CM 1:4 for laying floor finishes with round edges complete all as specified. |
| 75 | S&F in repair brass CP mixer for mixing Hot and Cold water 15 mm bore screwed down for iron pipe and complete all as specified.(Make- Jaguar, parko , Marc) |
| 76 | S&F in Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position completein all respect as specified |
| 77 | S&F in repair Vitreous china ware water closet Orissa pattern including connecting to trap and to flushing pipe anti Syphonage pipe etc complete , fixed as in repairs of size 580mm X 440mm complete all as specified. Make: Hindware / Cera / Parryware. complete all as specified and as directed (Make- Cera, Jaguar, Parryware.) |
| 78 | Supply and fix in repairsfor vitreous china ware wash hand basin with pedestal type (color as specified and directed), flat back size 550 X 400mm including 15mm dia pillar tap swan neck)chromium plated, CP waste coupling, waste fittings, union and waste pipe 32mm dia or required length and all necessary inlet, out let connections complete all as specified and directed. (Make- Cera, Jaguar, Parryware.) |
| 79 | S&F in repairs vitreous china water closet Padestal pattern( white ) includng trap but excluding fixing bolts, flushing cistern and flush pipe complete all as directed.(Make- Cera, Jaguar, Parryware.) |
| 80 | S&F Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and as directed |
| 81 | Taking down carefully aluminum point wiring on TW Batten/in conduit / with conduit (light/Fan/socket or power) complete and making good the disturbed surfaces of wall/ceiling etc including taking down fittings such as switches, ceiling roses, pendants, Regulators, sockets, light fittings etc and removing materialfrom site except tube light fittings, fans etc which shall be re-usedin work complete all as directed . |
| 82 | M & L for concealed Point wiring complete with 1.5 Sqmm (nominal area)1100 volts grade single core PVC insulated FR-LSH multistranded copper conductor cable in and including medium grade duty PVC conduit not less than 20 mm(wall thickness 1.5 mm ) including fitting & accessories, with sunken galvanized pressed steel terminal boxes with 3 mm thick laminated baklite (Hylum/Anchor) sheet top cover for mounting switch, socket etc for one light/fan/bell point controled by one switch and(Phase - Red, Neutral - Black) and earth continuity conductor 1.5 sqmm. stranded copper conductor with green FRLSH PVC insulating earth common earth dolly, complete all as specified. |
| 83 | All as per ser item 2 abovebut for 3 pin socket out let 5 Amps on independent board |
| 84 | All as per ser item 2abovebut for 3 pin socket out let 5 Amps on same board |
| 85 | All as above item No 02 but M & L Point wiring with 1100 volts grade single core PVC insulated FRLSH multistranded copper conductor cable 2.5 sqmm (Phase - Red, Neutral - Black) and earth continuity conductor 2.5 sqmm (Green) drawn into and including concealed rigid non metallic PVC conduit medium grade not less than 20 mm diaISI marked with all conduit fittings / fixing accessories and sunken galvanized pressed steel terminal box of thickness not less than 1.2 mm covered with 3 mm thick phenolic laminated white sheet cover for one 16 amp socket outlet controlled by one switch on independent board complete. |
| 86 | S & F switch piano flush button single pole one way 16 amp complete. |
| 87 | S & F socket outlet 2 in 1, 2 & 3 pin, 6 amp, flush type complete. |
| 88 | S & F socket outlet2 in 1, 3 pin16 amp flush type complete. |
| 89 | S & F switch piano flush button single pole one way 5/6 amp complete. |
| 90 | S&Fmodular switch6 amp 230 V AC one way, one module complete all as specified |
| 91 | S&F modular switch 16 amp 230 V AC one way, with indicator one module complete all as specified |
| 92 | S&F Modular Socket 6A/16A, 2/3 pin two module combined complete all as specified. |
| 93 | S&FModular socket , 16A, 2/3 pin, two module complete all as specified. |
| 94 | Supply only PVC Casing and Capping 20 mm ISI Marked. all as specified and directed. |
| 95 | S&F modularfan regulatorstep type, 120W, 2 module complete all as specified |
| 96 | Suply and fix white colour plates withframe formodular switchof 01module complete all as specified |
| 97 | Suply and fix white colour plates withframe formodular switchof 03module complete all as specified |
| 98 | Suply and fix white colour plates withframe formodular switchof 04module complete all as specified |
| 99 | Suply and fix white colour plates withframe formodular switchof 06module complete all as specified |
| 100 | Suply and fix white colour plates withframe formodular switchof 08module complete all as specified |
| 101 | Supply and fixing LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified.Make : Crompton Greaves/Philips/Bajaj/Wipro |
| 102 | M & L of lamp holder, PVC/ polycarbonate type complete and including taking down unserviceable lamp holder of any description complete all as specified |
| 103 | Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified.Make : Crompton Greaves/Philips/Bajaj/Wipro |
| 104 | Supply and fixLED light fitting 1x9W/1X10Wbulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified.Make : Crompton Greaves/Philips/Bajaj/Wipro |
| 105 | Supply and fixing MCB\"s single pole and neutral 32 Amps, 240 Volts,10 KA rapturing capacity \"B\" curve.complete all as specified & directed. |
| 106 | Supply and fixing MCB\"s single pole 6 Amps to 32 Amps, 240 Volts,10 KA rapturing capacity \"B\" curve.complete all as specified & directed. |
| 107 | Supply and fixing 415 V , 10 KA \"C\" curve miniature circuit breaker (MCB\"s) of capacity 63 Amps TPN. complete all as specified & directed. |
| 108 | Material and Labour for sub main wiring with two runs of single core PVC insulated, unsheathed copper condutor, multi stranded cable of size 6.00 Sqmm 1100 volts grade drawn PVC concealed conduit of size19/20 mm (ISI marked) including PVC accessories complete incl cutting and chasing and making good etc including one run of 6.00 Sqmm single core copper conductormulti-stranded PVC insulated, unsheathed cable as earth wire continuity conductor complete all as specified . Note : Two run of 6.00 Sqmm cable one run of 6.00 Sqmm cable as earth continuity conductor and one run of PVC Conduit shall be measured & paid as one unit |
| 109 | S & F for MCB DB SPN 8 waydouble door IP 43 complete prewired including Bus Bar with earth bar and neutral bar etc suitable for operation on 240 volt 50 Hz AC supply including necessary provision for inserting the DBs in wall by cutting the brick/stone masonary etc and making good of distrubed surface to match with existing colour of wall complete all as specified and as directed . |
| 110 | Supply and fixing sheet steel metal enclosure (DB) triple pole and neutral 4 way Double Door 415 V, with 200 amps rated bus bar complete all as specified and directed. |
