|
| 1 | Demolition of brick work built in cement mortarincluding all quoins arches, pillars etc but including ashalr facing dressed stone work and precast concrete articles complete all as specified and as directed |
| 2 | Demolition of cement conc (un reinf) in ground floor and pavings not exceeding 15 cm thick above or below ground level complete all as specified and as directed |
| 3 | Taking down cement or cement lime plaster of any description on brick or stone walls, etcincl raking out joints hacking for keys srubbing down with water etc complete all as specified and as directed |
| 4 | Taking down chowkats or frames with Shutters( without taking off the shutter from the frame ) of area n.exc 1.50 Sqm each and removing from site complete all as specified and as directed |
| 5 | Taking down chowkats or frames with Shutters( without taking off the shutter from the frame ) of area exc 1.50 Sqm but n.exc 4.00 Sqm & removing from site complete all as specified and as directed |
| 6 | Taking down shutters of any description exc 1sqm each and not exc 2.00 sqm each complete all as specified and as directed |
| 7 | Taking down shutters of any descriptionsize exc 1 sqm and n.exc 2 sqm but refixing in the same opening complete all as specified and as directed |
| 8 | M&L brick work , with sub class \"B\" bricks built in cement mortar 1:6 straight or curved on plan exc 6mtr mean radius, using old size bricks complete all as specified |
| 9 | M&L 15mm thick cement plastering in cement mortar (1:6) on fair faces of brick work or concrete surfaces finished even & smooth without using extra cement complete all as specified. |
| 10 | M&L 15 mm thick cement plastering in cement mortar (1:4) of brick work or concrete surfaces with using water proofing compound finished even & smooth without using extra cement complete all as specified. |
| 11 | M&l for 5 mm th rendering in cement mortar in 1:3 on ceiling complete all as specified and as directed |
| 12 | S&F Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering to Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening conforming to GdeFe 290(Gde E-165) complete all as specified and as directed |
| 13 | M&L for 35 mm thick 2nd class hard wood,, factory madePlain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated as specified in SSR Part I section 8 clause 8.2(a) complete all as specified and as directed |
| 14 | M&L for 35mm thIInd class Hard Woodglazed /gauged shutters open rebated and prepared to receive glass /gauge etc without sash bars edges of framing plain or chamferedrounded fitted with cut and mitred beads for securing glass/gauge etc all as specified in SSR Part I section 8 clause 8.2(a) including helical Door spring complete all as specified and as directed |
| 15 | S&F solid PVC door frame of size 50mmX 47mm made out of 5mm th plain colour PVC sheet reinforced with MS square tube, supplying & fixing in opening as per specification & drawing complete all as specified and as directed |
| 16 | S&F 30mm th factory made PVC door shutter solid panel consisting of frame made out of MS tubes for top & bottom rails .Ms frame shall be covered with heat moulded plain colour PVC \"C\" channel having a PVC strip of 20mm width stuck inside with solvent cement for stiles and plain colourPVC sheet for top rail , lock rail &bottom rail on eitherside& as gap insertfor top rail & bottom rail . Panellingof plain of plain colurPVC sheet to be fitted in the MS frame welded/sealed to stiles & rails with suitable PVC sheet beading and joined together with solvent cement ,etc all as specified and shown on drawings complete all as specified and as directed |
| 17 | S&F 35mm thick flush shutter solid core constructionwith block board core and plywood face panels commercial face on both faces complete all as specified and as directed |
| 18 | Supply & Fixing for steel windows 1.25 mm thick box type powder coated (minimum thickness of powder coating 50 micron) ERW hollow \"P\" section of size 60mm x 25mm single rebate comprises of skeleton shutter ERW sec 50 x 20 mm & 1mm thick and openable leaf consisting two nos sash bar of T section 20x3mm complete welded to frame including cutting holes and making good dismanteled portion in cement concrete (1:2:4) type B-I four nos for each window including following fitting welded to shutter complete all as specified and as directed by Engineer-in-Charge :-(i) Hold fast 150mm long 12 mm x 3mm made to shape - 04 Nos each window.(ii) Handle of Z Section 20 x 25 mm, 100mm long 01 Nos each leaf.(iii) MS tower bolt 150 mm long-02 Nos each leaf.(iv) Z Section 20 x 25mm, 100 mm stopper - 01 Nos per leaf(v) Cleat 55 mm long of hollow square 15x20x63mm welded to hinges - 01 Nos per leaf.(vi) MS Box type hinges of size 75 X 12 mm - 02 Nos per leaf.(vii) MS Guard bars square 12mm dia @10 cm c/c with GI frame fixed to window frame.(viii) Fabrication and fixingNote : Wire gauge shall be measured and paid for separately. |
| 19 | Ditto all as per item No above butwith Gauged shutter |
| 20 | M& L for Cutting holes in brick walls built in cement mortar or cement lime mortar exc half brick but not exc one brick th all as specified. |
| 21 | M & L for PCC 1:3:6 type C-1 with 20 mm aggregate as in door frames for fixing holdfasts and making good to the entire satisfaction of the engineer in charge. |
| 22 | S&F 300mm size mild steel sliding door bolt plate type stove enamelledblack with bright bolt not less than 12mm diaincl a minimum of six nut and bolts ,four on bolt plate and two on stapple plate complete all as specified |
| 23 | S&F mild steel barrel tower bolt 200mm size stove enamelled black with bright bolt etc all as specified |
| 24 | S&F 125 mm size mild steel pressed handle stove enamelled black and fixed complete all as specified and as directed by engineer-in-charge. |
| 25 | S&F 100 mm size mild steel butt hinges medium weight cold rolled complete all as specified and as directed by engineer-in-charge. |
| 26 | S&F floor door stopperaluminium alloy body and tounge 140mm anodised with hard drawn steel spring etc complete all as specified and as directed by engineer-in-charge. |
| 27 | S&F Door closer hydraulically regulated, designation No. 3, universal type,aluminium extruded section suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and as directed |
| 28 | S&F 19 mm th Prelaminated particle board, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame workcomplete all as specified and as directed by engineer-in-charge. |
| 29 | Ditto all as perabove but 25mm th as in cup board shutter etc like works |
| 30 | S&Fgalvanized mild steel wire cloth 0.56mm dia of wire and average width of aperture 1.18mm fixed with tinned tack or galvanised wire staple complete all as specified and as directed by engineer-in-charge. |
| 31 | S&F in repair galvanized mild steel wire cloth 0.56mm dia of wire and average width of aperture 1.18mm fixed with tinned tack or galvanised wire staple complete all as specified and as directed by engineer-in-charge. |
| 32 | S&F in 3mm th sheet glass ordinary quality glazing with oil putty in square n.exc0.5 sqm in each pane |
| 33 | S&F in repair Vitreous china ware water closet Orissa pattern including connecting to trap and to flushing pipe anti Syphonage pipe etc complete , fixed as in repairs of size 580mm X 440mm complete all as specified. Make: Hindware / Cera / Parryware. complete all as specified and as directed. |
| 34 | S&F in repairs vitreous china water closet Padestal pattern( white ) includng P or S trap but excluding fixing bolts, flushing cistern and flush pipe complete all as directed. |
| 35 | S&F in repairs PVC flushing cistern, 10 ltr capacity, valve less symphonic action type, low level, with intel, ball valve, float valve abd handle including brackets fixed in position, 32 mm dia PVC flush pipe and connection to water mains complete all as specified and directed by Engineer-in-Charge. |
| 36 | S&F in repairs vitreous china urinal bowl urinal flat back, size of 465 x 355 x 265 mm white (minimum), with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) complete all as specified and directed. |
| 37 | S& F in repair vitrious china wash hand basin flat back550X400mmincl fixing bracket, pvc waste coupling and waste pipe,cp pillar tap etc all as specified and directed by engineer-in-charge. |
| 38 | S&Fin repairs 600X450mm bevelled edge looking mirror of selected quality glass of 4mm thick etc mounted on AC board complete all as specified and directed by engineer-in-charge. |
| 39 | S&F in replacement 20 mm dia harrison rails/curtains rods mild steel with decorative finish , with fixing brackets , stops, rollers complete all as specified and as directed (two brackets per 1.5 M length and 08 Nos roller per 1.RM) |
| 40 | Dismantling water tanks of any description exc 250 and n.exc 500 ltr capacity and removing to store complete all as specified and as directed by engineer-in-charge. |
| 41 | S&F Rotational moulded polythene water storage tanksdouble layer (cylinder each vertical with closed top) of capacity 500 Itrs, hoisted and fixed in position including pvc float valve 20mm size,specified in SSR Pt-1 Make : Sintex / Frontier /Polycon complete all as specified and as directed |
| 42 | Fixing only water storage tanksof capacity 500 Itrs, |
| 43 | Takingdown GI tubing and connections with all fittings 15 mm borecomplete all as specified and as directed by engineer-in-charge. |
| 44 | Ditto all as per itemabove but 20mm bore. |
| 45 | S&F 15 mm dia GI tubing , medium grade,and connections fixed to wall or ceiling,laid in floor etc complete all as specified and as directed by engineer-in-charge. |
| 46 | ditto all as per itemabove but fixing only |
| 47 | S&F 20 mm dia GI tubingand connections fixed to wall or ceiling,laid in floor etc complete all as specified and as directed by engineer-in-charge. |
| 48 | ditto all as per itemabove but fixing only |
| 49 | S&F in repair PVC shower rose PTMT 15mm size fixed to iron pipe complete all as specified and as directed by engineer-in-charge. |
| 50 | S&F in repair pvc connection 15mm size with PTMT nuts of length 450mm complete all as specified and as directed by engineer-in-charge. |
| 51 | S&F in repair 15 mm bore dia bib tap (long or short body) cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for union fancy type chromium plated concealed complete all as specified and as directed by engineer-in-charge. |
| 52 | S&F in repair 15 mm bore stop valve cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for union fancy type chromium plated concealed complete all as specified and as directed by engineer-in-charge. |
| 53 | S&F in repair 15 mm bore stop valve cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for union fancy type chromium plated with long shank and cup (concealed type) screwed both ends for iron pipe etccomplete all as specified and as directed by engineer-in-charge. |
| 54 | S&F in repair towel rail 600mm long of PTMT incl cp brass srews andwooden/plasticcleats (Minimum weight 190 gms) complete all as specified |
| 55 | S &F in repairs PVC waste pipe of standard pattern not less than 75cm long 32 mm/40mm dia for WHB/steel sink waste coupling or suitable size complet all as directed. |
| 56 | S&F shelf of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 300gms) |
| 57 | S&F waste coupling of PTMT 32 mm dia half or full threaded for WHB all as specified and directed. |
| 58 | S&F waste coupling of PTMT 40 mm dia half or full threaded for Kitchen Sink all as specified and directed. |
| 59 | M&L preparing surfaces ofnewwalls and applying two coats of oil bound distemper over a coat of primercomplete all as specified |
| 60 | M&L preparing surfaces new of walls and applying two caots of cement base paint over a coat of primercomplete all as specified incl preparation of surfaces. |
| 61 | M&L for three coats of white wash on newly plastered surface of ceiling incl preparation of surfacecomplete all as specified. |
| 62 | M&L for two coats synthetic enamel paint new wooden surface over 10 cm width or girth over a coat pink primer incl preparation of surfaces. |
| 63 | M&L for two coats of synthetic enamel paint on new steel surface over 10cm width or girth over a coat red oxide primer incl preparation of surfaces. |
| 64 | M&L PCC1:4:8 type D-2using 40 mm graded stone agg as in mass filling and sub base. |
| 65 | M&L for 75 mm th cement conctype C-2, 1:3:6 as in plinth protectionwith using 40mm graded stone aggregate etc all as specified. |
| 66 | M&L for 40mm th PCC 1:2:4 type B1 (using 20mm graded aggregate) as in flooring incl finishing the surface even and smooth with using extra ement |
| 67 | M&L for PCC 1:5:10 typeE2 using 40 mm graded stone aggregate as in filling in sunken floor etc all as specified and directed |
| 68 | Supply only glass dividing strip 38mm wideand 3mm thinserted in position |
| 69 | S&F in repair PVC SWR pipe 110 mm dia fixed to walls, single socketed in any length with rubber ring joints fixed to walls etc all as specified |
| 70 | S&F in repair PVC SWR pipe 110 mm dia laid in trenches , single socketed in any length with rubber ring joints fixed to walls etc all as specified |
| 71 | S&Fin repairs 110mm dia PVC branch piecessingle equal or un euqal |
| 72 | S&Fin repairs100 dia PTMT grating doom (min wt 25 gms) complete all as specified |
| 73 | S&Fin repairs100 mm dia stack clampmade out of25x4mmFlat iron etc all as specified |
| 74 | Repair ,servicing and overhaulingofrolling shutter gear operated type with chain wheel and hand chain of any size by oiling , greasing to gear box , guide channel , shaft , pully and minor repair to gear box, hood cover, pully etc and replacement of minor parts like spring ,pins,lathe etc and including securing guide channel to walls with PCC 1:2:4 type B1 and making good the surfaces with CM (1:4) and making the rolling shutter functional to the entire satisfaction of the Engineer in chargecomplete all as specified and directed by Engineer-in Charge. |
| 75 | Hacking old broken glass of any size and description from wooden frames. |
| 76 | Ditto all as per item 104 above but from steel frame. |
| 77 | S&F in repair 3mm th sheet glass ordinary quality glazing with oil putty in square n.exc0.5 sqm in each pane |
| 78 | Ditto all as per tem No 106 above but 3mm th pin head/ figuered glass |
| 79 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing from site. |
| 80 | M&L for coloured vitrified ceramic 10mm thick (sqare/rectangular ) polished, area of each tiles not exceeding 0.36 sqm in floor etc ,set and jointed in neat cement slurry and pointed in white or colouredcementto match etc all as specified over 15 mm th screed bed or bedding layer in CM (1:6) complete all as specified and directed by Engineer-in Charge (Make- Kajaria, somany, orientbell) |
| 81 | M&L for Non - skid coloured Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed inneat cement slurry and pointed in white or coloured cement to match , over15 mm th screed or bedding layer in CM 1:6 complete all as specified and directed by Engineer-in Charge (Make- Kajaria, somany, orientbell) |
| 82 | M&L for Glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match complete all as specified and directed.(Make- Kajaria, somany, orientbell) |
| 83 | M&L PCC 25mmth 1:2:4 type B1using 20 mm graded stone agg as in levelling course. |
| 84 | M&L Machine pressed precast concrete interlocking paver block vibrator finishany shape and size confirming to IS 15658-2006 of 80 mm thickness M-40 Grade with gery cement and pigment , complete all as specified and directed by Engineer-in Charge. |
| 85 | Sand filling under floors or in foundations including watering and consolidation |
| 86 | M&L for 300X300X 25 mm th chequered cement concrete tiles coloured with grey cement andpigmentas in floor etc over 20mm th screedbed in CM 1:6 complete all as specified and directed by Engineer-in Charge. |
| 87 | M&L 18-20 mm th machine cut kota stone slab flooring over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing, over 20 mm th screed or bedding layer in CM 1:6 complete all as specified and directed by Engineer-in Charge. |
| 88 | All as per itemabove but as in skirting over 10mm th rendering in CM 1:4 complete all as specified and directed by Engineer-in Charge. |
| 89 | S&F in repair sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers, waste pipe and waste coupling; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified. |
| 90 | All as per item No 119 above but without drainage board and over all size 495mm x 420mm, bowl size 410mm x 330mm x 160mm complete all as specified. |
| 91 | Dismantlingof brick tiles single layer as in roofcovering complete all as specified |
| 92 | Demolition of mud in roofs any thicknessincludingplastering and leeping(whether full thickness removed or only a part thereof) all as specified. |
| 93 | M&L for PCC (1:2:4) typeB-0 (using 12.5 mm graded stone aggregate) as in benching, roof padding,roof kerbs or mud stops, coping etc rounded or chamfered on edges. |
| 94 | M&L 12mm thick cement plaster in cement mortar (1:3) on concrete roof surfaces finished even and fair, including cleaning theroof top by water etc all as specifiedand directed by Engr in charge with WPC. |
| 95 | S&F anodised aluminium framepowder coated with minimum thickness of powder coating 50 micron for doors, windows, ventilatorswith one or more rebates including joining cleat for fixing, hinges etc. complete all as specified. complete all as specified and directed. Note:- Prelaminated partical board and sheet glass/wiremesh shall be measured and paid for separately. Make:- INDAL/HINDALCO/JINDAL or equivalent as per IS. |
| 96 | S&F anodised aluminium door shutters,aluminium section weighing 0.55 Kg/m ncluding necessary joining cleats,glazing clips, ruber neoprene packing, handles 2 Nos in each door, 2 Nos tower bolt of size 200 mm, hinges, anodised aluminum snap beading screws etc. complete all as specified. |
| 97 | S&F 5.5 mm thick sheet glass selected quality and glazing with oil putty in squares exc. 0.5 Sqm in each pane with solar control film 25 micron reflective type sticked to glass panes as per instructions of manufacturers, complete all as specified and as directed |
| 98 | S&F 12 mm th Prelaminated particle board, exterior grade, prelaminated both side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame workcomplete all as specified and as directed by engineer-in-charge. |
| 99 | Cleaning the surface and made free of dirt, foreign particle, laitance followed by grinding all all protrusion to make surface modulated. Thereafter, inspection for cracks on the surface caused by thermal expiation contraction. Cutting the grooves with suitable cutter machine in V groove filled with repairs mortar/ microconcrate / general purpose grout as recommended proportionally as per recommendation of manufacture. Making of Gollas at all the corners with polymer modified mortar (1:4) cement sand with 3.5% acylic of cement weight.Make : Asian Paints/Sikka/STP |
| 100 | Supply and applying high build elastomeric waterproofing coating based on pure hydrophobic polyurethane cold appliId of spray/brush applied, membrane with an elongation of 280% and tensile strength of 2.7N/mm2 as per ASTM D 2370, crack bridging ability of 3mm, no leakage upto 5 bars of water pressure as per DIN 1048, min 88% solid content. The system includes final base preparation, epoxy primer 1:1 (Resin; harder) application with 100% water dilution and Pure polyurethane application in 2 coats with a total min consumption of 1.25 kg per Sqm. Application should be done with Graco sprayer by a company authorised applicator ”Make: Asian Paint/Sikka/STP |
