|
| 1 | Construction of Digital LibraryEarth work in excavation of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with approved material as per S.I. No. 251. |
| 2 | Earth work in filling upto distance 5.00 km lead with cartage/royalty for levelling dressing including supply of all material,labour and T&P etc.required for proper completion of work |
| 3 | Cement concrete with 4cmgauge approved brick ballast, approved fine sand, cement in the proportion 8:4:1 including supply of all materials, labour and tools and plants etc. required for proper completion of the work. SI No. 281 |
| 4 | M-150 brick work in One part cement and Six part Fine sand in foundation and plinth including supply of all materials, labour & T&P required for proper completion of work as per SI.No. 303 |
| 5 | M-150 brick work in One part cement and Six part Fine sand in superstructure including supply of all materials, labour & T&P required for proper completion of work as per SI.No. 303 & 310. |
| 6 | 12 mm thick plaster with cement and approved course sand in proportion 1:4 over brick work minimum thickness not to be less than 1 cm including supply of all materials labour and T&P etc. required for proper completion of the work SI.NO. 584 |
| 7 | R.C.C raft foundation work in with cement approved coarse sand and 2Cm gauge approved stone grit in proporation of 1:1.5:3 in lintels of doors,windows and sunsheds excluding supply of reinforcement and lits bending but i/c its fixing and binding the same with 24 B.W.G.G.I Binding wire and i/c necessary centering and shuttering etc.and supply of all material, labour and T&P etc.requried for proper compaction of work.Binding wire of Supplied by the contractor free of cost. |
| 8 | R.C.C lighter beam having spans upto 6M work in with cement approved coarse sand and 2Cm gauge approved stone grit in proporation of 1:2:4 in lintels of doors,windows and sunsheds excluding supply of reinforcement and lits bending but i/c its fixing and binding the same with 24 B.W.G.G.I Binding wire and i/c necessary centering and shuttering etc.and supply of all material, labour and T&P etc.requried for proper compaction of work.Binding wire of Supplied by the contractor free of cost. |
| 9 | R.C.C columns work in with cement approved coarse sand and 2Cm gauge approved stone grit in proporation of 1:1.5:3 in lintels of doors,windows and sunsheds excluding supply of reinforcement and lits bending but i/c its fixing and binding the same with 24 B.W.G.G.I Binding wire and i/c necessary centering and shuttering etc.and supply of all material, labour and T&P etc.requried for proper compaction of work.Binding wire of Supplied by the contractor free of cost. |
| 10 | R.C.C in slab work in with cement approved coarse sand and 2Cm gauge approved stone grit in proporation of 1:1.5:3 in lintels of doors,windows and sunsheds excluding supply of reinforcement and lits bending but i/c its fixing and binding the same with 24 B.W.G.G.I Binding wire and i/c necessary centering and shuttering etc.and supply of all material, labour and T&P etc.requried for proper compaction of work.Binding wire of Supplied by the contractor free of cost. |
| 11 | Mild steel or iron in plain work such as concrete or reinforced brick work (when not included in an over all rates) wrought to required shape as necessary including bending for proper completion of the work. As per S.I. No. 504 of Ch. 10. |
| 12 | Fabrication of grill and staircase railling 35kg/sqm=0.35qtl/sqm including supply of all material,labour and T&P etc.required for proper completion of work |
| 13 | Cement concrete with 4cm gague approved stone ballast coarse sand and cement in proporation of 4:2:1 but with 2cm gaguge stone gritt instead of 4cm gauge stone ballast inculding supply of all materials labour and T&P etc for proper completion of work.As par S.I No-279A Ch.-05 |
| 14 | Providing and fixing 1mm thich M.S. Sheet door with frame of 40x40x6mm (1½\"x1½\"x¼\") angle iron 3.15 mm (1/8\") thick M.S. gus set plate at the junction and corners including supply and fixing of necessary fittings. Lock rail of 15\" length of oxidised iron and including pintels hooks at the top and applying priming coat of red lead paint on all sides complete. As per S.I. No. 517a |
| 15 | Providing & fixing Providing & fixing 60micron powder coated Alluminium partly openable & oartly fixed door and window in hollow box section glazed with 5mm thick float glass fixed in EPDM gaskets with Alluminium beading counter sunk stainless steel screws rubber weather strips rawl plugs gutties etc complete including cost of alluminium sub frame of size 76.20x24.40 x1.60mm size including supply of all material labour & T&P etc required for proper completion of work |
| 16 | Providing & Fixing of double Action hydrolic floor Spring approved brand and Manufacture conforming to IS 6315 having brand logo embosed on the body/plate with double spring mechanisum for door i/c floor cutting with stainless steel cover plate 1.25mm thickness Complete. |
| 17 | Providing and fixing in position Collapsible steel shutters with vertical channels 20x1.0 with top and bottom rails of T iron 40x40x6mm with 38mm dia steel pulleys with bolts,nuts locking arrangement stoppers,handles including supply of all material,labour and T&P etc.required for proper completion of work |
| 18 | Providing and fixing fly proof galvanised m.s wire guage with average width of aperture 1.4mm in both directions with wire of dia 0.63mm with 2nd class teak wood beading 62x19mm to clerestory window including supply of all material,labour and T&P etc.required for proper completion of work |
| 19 | Supply and fixing 6 to 8 mm thick ivory or light shades vitrified tiles 600x600 mm size in flooring and skirting with 1:3 approved cement and coarse sand mortar finished with in its cement colour slurry, jointing and polished of approved quality complete including supply of all materials, labour tools and plants etc. required for proper completion of the work as per direction of Engineer-in-charge. As per Ch. 14 S.I. No. 22-5. |
| 20 | Marble Stone Flooring with 18mm thick marble stone as per simpal marble approved by Engineer-in-charge 12mm thick base of cement mortar 1:4 laid and joint with Grey Cement slurry i/c Rubbing and Polishing complete (Udaipur Green Marble Stone) |
| 21 | Supply and fixing 6 mm thick china glazed tiles of first quality in skiriting or dado ladi with 1:3 cement and approved coarse sand mortar finished with white cement slurry jointing and polishing complete including supply of all materials, labour and T&P etc. required for proper completion of the work. As per Ch. 14 S.I. No. 628 |
| 22 | Wall Panelling Providing & Fixing of in Position wall Panels PF plain phenol formaldehde synthetic resin Tiles over kail wood frame and provision for providing switch board fixtures etc. as per drawing complete with polishing and fining with french/wax polish as per dirction given Engineer-in-charge |
| 23 | Providing & Fixing false ceilling with integral densified calcium silicate reinforced with fiber and natural filler false ceilling tiles of size 595x595mm of approved texture design patterns as per CPDW specification of 2019 from ceilling use galvanised mild steel wire and fixed with galvanised iron angel including coat of all and supply of all materials, labour and T&P etc. required for proper completion of work. |
| 24 | Providing wall Putty on new srface with approved quality materail of berger/J.K/Birla or similar make 2 coat |
| 25 | Finishing walls with 2 coats of water proof cement paint of approved on pereviously old treated surface with this paint to give an even shade including supply of all materials, labour, Tools & plant etc. required for proper completion of the work.as per Ch. No. 15 S.I. No. 660+661 |
| 26 | Applying primer coat over new steel and other metal surface after paint including preparing the surface by throughly cleaning oil grease dirt and other foreign matter and scoured with wire brushes fine steel/wood scrappers and paparing and knotting including coat of all and supply of all materials, labour and T&P etc. required for proper completion of work. As per Ch. 15 S.I. No. 20-1(a)+2+3(ii). |
| 27 | Two Coat Painting of roof Cover brick work or Where ever required with bitumen @ 0.65 kg per sqm ineach coatincluding supply of all material ,labour and T&P etc.required for proper completion of work |
| 28 | Providing & laying of brick coba 12mm thick laid with M-150 Class brick coba brick bat coba 7.50cm thick with gap of 15mm to each other over 20mm thick base of cement mortar 1:4 cement and coarse sand mixed with water Proofing compound spreading cement slurry mixed with aerelic cement concrete water proofing comound filled gaps of coba & top of coba mortar mixed with water Proofing compound in 1:4 cement and coarse sand mortar finised smooth & Top Mashed fakse sqe 30cmxcmand side wall parapit shall be mono tythic plaster wall upto 30cm hight and juction and corner shall be rounded by brick ballast cement and coarse sand masonary coba with top finished plaster mixed acetic water proofing compund @2% by weight & including supply of all material ,labour and T&P etc.required for proper completion of work |
| 29 | Electrification fitting as per attached sheet |
| 30 | Construction of 2 Toilet & 1 Urinal at First floor of Library at Nagar Panchayat Sahanpur(Bijnor).Excavation in foundation in ordinary soil (loam clay and sand) including lift upto 1.50 M and lead upto 30M and including filling watering and ramming of excavated earth into the trenches or into the space between the building and the side of foundation treches. |
| 31 | Concrete with 4cm. Guage brick ballast fine sand of 1.25 F:M. and cement in proportion of 8:4:1 in foundation and under floors including supply of all meterials, labour and T&P etc. required for proper completion of work. |
| 32 | M-150 brick work in One part cement and Six part fine sand mortar in foundation and plinth including supply of all materials, labour & T&P required for proper completion of work as per SI.No. 307. |
| 33 | M-150 brick work in One part cement and Four part Coarse sand mortar in Superstructure h including supply of all materials, labour & T&P required for proper completion of work as per SI.No. 305+309. |
| 34 | R.C.C. Work with cement approved coarse sand and 2cm. gauge approved stone grit in proportion of 1:1.50:3 inslab excluding supply of reinforcement and its bending but including its fixing and binding the same with 24 B.W.G.G.I Binding wire and including necessary centering and shuttering etc. and supply of all meterials, labour and T&P etc. required for proper completion of work. Binding wire of supplied by the contractor free of cost. Plinth T& tie Beams |
| 35 | R.C.C. Work with cement approved coarse sand and 2cm. gauge approved stone grit in proportion of 1:1.50:3 inslab excluding supply of reinforcement and its bending but including its fixing and binding the same with 24 B.W.G.G.I Binding wire and including necessary centering and shuttering etc. and supply of all meterials, labour and T&P etc. required for proper completion of work. Binding wire of supplied by the contractor free of cost. Columns |
| 36 | R.C.C. Work with cement approved coarse sand and 2cm. gauge approved stone grit in proportion of 1:1.50:3 inslab excluding supply of reinforcement and its bending but including its fixing and binding the same with 24 B.W.G.G.I Binding wire and including necessary centering and shuttering etc. and supply of all meterials, labour and T&P etc. required for proper completion of work. Binding wire of supplied by the contractor free of cost. Slabs |
| 37 | M.S. (tor steel or plain) in as R.C.C. or R.B. work including bending for proper shape and including supply of steel & its wastage, bend, hooks, and authorised overlapping shall be measured and including cost of binding wire. |
| 38 | Cement Concrete with 2 cm gauge stone grit / single course sand and cement in proportion of 4:2:1 including supply of all material labour & T&P etc. required for proper completion of the work |
| 39 | 12 mm thick plaster with cement and approved course sand in proportion 1:3 over brick work minimum thickness not to be less than 1 cm including supply of all materials labour and T&P etc. required for proper completion of the work |
| 40 | Supply and fixing of1mm thick MS Sheet gauge door with frame of 40x40x6mm angle iron include screw necessary bending and excluding cost of floor spring if required for proper completion of the work as per direction of Engineer in charge. |
| 41 | Supply and fixing 6mm thick china glazed tiles of first quality inskirting or dado laid with 1:3 cement and approved coarse sand mortar finished with white cement slurry jointing and polishing complete including supply of all materials, labour and T&P etc. required for proper completion of the workas per Chapter No. 14 Item No. 628 |
| 42 | Supply and fixing 6 to 8 mm thick ivory or light shades vitrefied tiles 600x600mm size in flooring and skirting with 1:3approved cement and coarse sand mortar finished within its cement colour slurry, jointing and polished of approvedquality complete, including supply of all materials, labour, tools and plants etc required for proper completionof the work. as per direction of Engineer-in-charge. As per Ch. 14 New item No. 5. |
| 43 | Distempering 2 coats with oil bound distemper of approved brand and manufacturer and required shade on undercoated wall surface to with an even shade over and including a primer coat with cement primer of approved brand and manufacture such as of British Shalimar, Asian paint after throughly brushing the surface free from moprtar droppings and other froeign matter and alson including preparing the surdace even and sand prepared smooth including cost of all materials. |
| 44 | P/F water closet squatting pan (Indian type W.C. pan) with 100 mm sand cast Iron P or Strap, 10 litre low level white P.V.C. flushing cistem with manually controlled device (handle lever) conforming to IS:7231, with all fittings as per Ch. 22 S.I. No. 17.1.1 |
| 45 | P/F White Vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350mm and with 5 ltr P.V.C flushing cistern |
| 46 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank lSI: 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. |
| 47 | Supply and fixing Ball valve brass of Approved quality complete 15mm nominal bore. |
| 48 | Providing and fixing white vitreous china wash basin including making all connections but excluding the cost of fittings : flat back wash basin of size 630x450mm. |
| 49 | Providing and fixing 600x450 mm bevelled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. |
| 50 | Prividing & Fixing G.I. Pipe complete with G.I. fittings and clamps including cutting and making good the walls etc.(15 mm dia) linternal work - Exposed on wall. |
| 51 | Supply and fixing C.P. brass Angle valve approved quality confirming to I.S 8931 15 mm nominal boar. |
| 52 | Supply and fixing C.P. brass bib cock of approved quality confirming to I.S 8931 15 mm nominal boar. |
| 53 | Add for Electrification (L.S.) |
| 54 | Furniture work for library Providing and fixing Fileing Cabinet/ Almirah withDoor and Pallar in it having size atleast 6\"x4\"x1.2\" |
| 55 | Providing and fixing Office table having size of 5\"x3\"x2.5\" in 15mm ply and wood with a famination atleast of 7mm laminate having channeled drawerr and Palla on both side with locks in heavy quality |
| 56 | Providing and fixing Visitor chairs for branded as godrej,sterling Ezeey,Metro etc in .S.S frame with fine cushioned covered with leatheriosed/Pu with Armrest in superior quaility Nos=30 |
| 57 | Providing and fixing Computer tablein laminated board having sliding option for keyboard, mouse and also having section for UPS,CPU or Printer with atteched feature for fileing cabinate palla and other space |
| 58 | Providing and fixing Reception table in D-Shape having size atleast 6\"x2.5\"x2.5\" in round shape with Drawer in Palla in 15mm ply and atleast 7mm laminationin very good quality |
| 59 | Providing and fixing 3 Seater joint chair in ss/crome in perforated jaali with arm rest on sides having capacity of sitting of atleast 3 person in heavey quality and weight |
| 60 | Supply & Installation work ofElectrical & Electronics set for library Supplying and installation ofA.C of2 Ton of approve company Hitachi/L.G/Blue star make with cartage and loading & unloading including making all connections with steblizer including all fiting complete of work |
| 61 | Supplying & Installation of Computer with CPU & UPS required as per Approved company as per Enginer in-charg including all complete of work |
| 62 | Supplying & Installation of Printer required as per Approved company as per Enginer in-charg including all complete of work |
| 63 | Supplying & Installation of Diesel Generator 7.5kw of approved make & quality\" |
| 64 | Supplying & Installation of CCTV Bullet camera with 12 channel DVR in CP plus & Hikvision brand inc all complete work |
| 65 | Supplying & Installation of 2kw Inverter with Battery for backup of approved make & qualityinc all complete work |
| 66 | Supplying & Installation of Wifi Router with connection inc all complete work |
| 67 | Add Gst @ 18% |
