|
| 1 | Item no.1 : -Excavation for foundation in earth, soil of all types sand, gravel and soft murum, removing the excavated material up to a distance of 50m. beyond the building area and stacking and spreading as directed, dewatering preparing the bed for foundation and necessary back filling, ramming, watering (including shoring and strutting) complete. (Bd.A.1 page no.259) |
| 2 | Item No.2:- Excavation for foundation in hard murum including removing the excavated material upto distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary backfilling, ramming, watering including shoring and strutting etc.complete. (Spec. No. : Bd.A.1 Page No. 259) |
| 3 | Item no.3 : - Providing dry trap stone solling 15 cm to 20 cm thick including hand packing and compacting compete. (Bd.A.12/P.264) |
| 4 | Item no.4 :-Providing and laying in situ, cement concreteM10 of trap/granite/quartzite/gneiss metal for foundation and bedding including bailing out water manually, form work, compacting and curing. (Spec.No.Bd.E.1/P.287) |
| 5 | Item no.5:-Providing and laying in situ, cement concrete M-20 of trap/granite/quartzite/gneiss metal for R.C.C. work in foundations like raft, grillage, stripes, foundations and footings of R.C.C. columns and steel stanchions including bailing out water manually, form work, compacting, curing and roughening them if special finish is to be provided.(Excluding reinforcement,and structural steel)(Spec.No.Bd.F.2/P.298/IS456:200) |
| 6 | Item no.6 :-Providing and laying in situ, cement concrete M-20of trap/granite/quartzite/gneiss metal for R.C.C. columns as per detailed drawing and designs, or as directed including, centeringformwork , compaction finishing the formed surface with cm 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing. etc. comp (Excluding reinforcement ) The c.m.1:3 plaster is considered for rendering uneven and honeycombed surface only.Wooden planks/shuttering will not be allowed.(Spec.No.Bd.F.5/P.300/ IS456:200) |
| 7 | Item no.7 :-Providing and laying in situ, cement concrete M-20 M-20of trap/granite/quartzite/gneiss metal for R.C.C. beam and lintels as per detailed drawing and designs, or as directed including, centeringform work, compaction finishing the formed surface with cm 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing.(Excluding reinforcement.The c.m.1:3 plaster is considered for rendering uneven and honeycombed surface only.Wooden planks/shuttering will not be allowed.) (Spec.No.Bd.F 6/P.300 IS456:200) |
| 8 | Item no.8 :- Filling in plinth and floors with contractor\"s material approved by Engineer-in-charge in 15 cm to 20cm. layers including watering and compaction complete. (Spec. No. : Bd.A.11 Page No. 263) |
| 9 | Item no. 9 :-Providing second class burnt brick masonry with conventional/ I.S. type bricks in C.M. 1:6 in foundations and plinth of inner walls/in external walls including bailing out water manually, striking joints on unexposed faces, racking out joints on exposed faces and watering complete. (Spec.No.Bd.G 1Page No313) (I.1/I/P.47) |
| 10 | Item no. 10 :-Providing second class burnt brick masonry with conventional/ I.S. type bricks in C.M. 1:6 in Superstructureincluding striking joints on unexposed faces, racking out joints on exposed faces and watering and scaffolding complete.(Spec.No.Bd.G.5/Page No.315) |
| 11 | Item no.11 :-Providing and laying in situ, cement concrete M-20of trap/granite/quartzite/gneiss metal for R.C.C. Slab and landings……….cm.thick as per detailed drawing and designs, or as directed including, centeringform work, compaction finishing the formed surface with cm 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing.(Excluding reinforcement.The c.m.1:3 plaster is considered for rendering uneven and honeycombed surface only.Wooden planks/shuttering will not be allowed.)(Spec.No.Bd.F 8/P.302/ IS456:200) (I.5/I/P.19) |
| 12 | Item no.12:-Providing and fixing in position TMT steel bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams, columns, canopies, staircase, newels, chajjas, lintels, pardis, copings, fins, arches etc. as per detailed designs, drawing and schedules including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. (From integrated plant) (Spec.No.Bd.F.17/Page No.306) |
| 13 | Item No.13:-Providing sills of required material 20mm to 25mm thick, on a bed of cement mortar 1:4 including cement float, filling joints with neat cement slurry, curing, polishing, rounding edges, cleaning complete.b) Granite |
| 14 | Item No.14:-Providing and fixing solid core flush door shutter in single leaf 32 mm thick decorative type of exterior grade as per detailed drawings approved face veneers 3 mm thick on both faces or as directed, all necessary beads, mouldings and lipping, wrought iron hold fasts, chromium plated fixtures and fastenings, with brass mortise lock, chromium plated handles on both sides, and finishing with French Polish etc. complete. |
| 15 | Item No.15:-Providing and fixing in position. (as per I.S.1868 / 1982) Aluminium sliding window of two tracks with rectangular pipe having overall dimension 63.50 x 38.10 x 1.02 mm at weight 0.547 kg/Rmt. and window frame bottom track section 61.85 x 31.75 x 1.20 mm at weight 0.695 kg/Rmt. Top and side track section 61.85 x 31.75 x 1.30 mm at weight 0.659 kg/Rmt. The shutter should be of bearing bottom 40 x 18 x 1.25 mm at weight 0.417 kg/Rmt. Inter locking section 40 x 18 x 1.10 mm at weight 0.469 kg/Rmt. And handle section 40 x 18 x 1.25 mm at weight 0.417 kg/Rmt. and top section 40 x 18 x 1.25 mm at weight 0.417 kg/Rmt. As per detailed drawings and as directed by Engineer in charge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5 mm thick plain glass with all required screws and nuts etc, complete. With colour Anodising without box |
| 16 | Item No.16:-Providing and fixing mild steel grill work for windows, ventilators, etc. 15 kg/sqm as per drawing including fixtures necessary welding and painting with one coat of anticorrosive paint and two coats of oil painting complete. |
| 17 | Item no.17 :-Providing and applying Two coats of wall care Putty of 2mm thickness for plastered surface and 5-6mm thickness finished concrete surface to Ceiling and Walls to prepare surface even and smooth of BrandsBIRLA WHITE, BERGER, BISION, J.K., make, etc complete. a) For plastered walls/ceiling 2mm |
| 18 | Item no.18 :-Providing internal cement plaster 12 mm. thick in single coat in cement mortar 1:4 with neeru finish to concrete or brick surface, in all position including scaffolding and curing complete.(Spec.No.Bd.L 2/ Page No.368 )(Spec.No.Bd.L 10/ Page No.370) |
| 19 | Item No.19 :-Providing internal cement plaster 20mm thick in two coats in cement mortar 1:4 without neeru finish, to concrete, brick surface, in all positions including scaffolding and curingetc.complete. |
| 20 | Item no.20 :-Providing and laying polished Tandur Stone flooring 25mm to 30mm thick and of required width in plain / diamond pattern on a bed of 1:6 C.M. including cement float, filling joints with neat cement slurry, curing, polishing and cleaning complete. (Spec.No.: Bd.M.3 Page No. 380) |
| 21 | Item no.21:-Providing and laying vitrified mirror / glossy finish tiles decorative typehaving size 590 mm to 605 mm x 590 mm to 605 mm of 8 to 10 mm thickness and confirming to IS. 15622-2006 ( group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and clearingetc. complete. a) Flooring |
| 22 | Item No 22:- Providing and laying vitrified mirror / glossy finish tiles having size 590 mm to 605 mm x 590 mm to 605 mm of 8 to 10 mm thickness and confirming to IS. 15622-2006 ( group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and clearingetc. complete.b) Skirting |
| 23 | Item No.23:-Providing and fixing 900mm high S.S.304 Grade Stainless steel railing with 40mm diameter and 1.5mm thick at top,40mm diameter and 1.5mm thick vertical supports spaced at 1.5m center to center and 8mm thick toughened glass including fabricating ,fixtures, errecting , necessary welding , grinding , finishing, buffing to stainless steel pipe etc. complete |
| 24 | Item No.24:-Providing and applying plastic emulsion paint of approved quality, colour and shade to old and new surfaces in two coats including scaffolding, preparing the surface. (excluding the primer coat)etc. complete. Item including with prime coat |
| 25 | Item No.25 ;- Providing and applying two coats of water proof cement paint of approved manufacture and of approved colour to the plastered surfaces including scaffolding if necessary, cleaning and preparing the surface, watering for two days etc.complete. |
| 26 | Item No.26:- Providing cement based water proofing treatment to terraces (Indian water proofing or alike) with brick bats laid in required slope to drain the water for any span after cleaning the base surface. Applying a coat of cement slurry admixed with approved water proofing compound and laying the brick bats on bottom layer in C.M.1:5 admixed with approved water proofing compound filling up to half depth of brick bats, curing this layer for 3 days, applying cement slurry over this layer joints of brick bats with C.M.1:3 admixed with approved water proofing compound and finally top finishing with average 20 mm. thick layers of same mortar added with jute fiber at 1 Kg per bag including finishing the surface smooth with cement slurry admixed with approved water proofing compound. Marking finished surface with false squares of 300mm x 300 mm. making the junctions at the parapet rounded and tapered top for required height, with drip mould at the junction of plaster and parapet and curing and covering 10 years Guarantee against leakproofness on Court fee stamp paper of Rs. 500/- including ponding test etc. complete. |
| 27 | Item No.27 :-Painting letters upto 20 cm height complete brushes, coir brushers, dusting, cleaning, including cost of paint etc. complete. |
| 28 | Item No.28 :-Providing and fixing board displaying information, such as \"Name of work, Tender cost, Name of Contractor, Work completion and liability period etc\", having rectangular shape of 1.20m x 0.90m size made out 18 gauge (1.25mm) thick mild steel sheet painted with one coat of Zinc chromate stoving primer and two coats of enamel paint on front side and grey stove enamel on back side and border / messages / symbols etc. with approved colour shade paint complete, on M.S.angle of size 35 x 35 x 3 mm frame with properly cross braced M.S. angles of size 35mmx35mmx3mm duly painted including Two M.S. angle iron posts of size 65 mm x 65 mm x 6 mm, 3.65 m long painted with alternate black and white bands of 25 cm width including all fixtures etc.and fixing the boards in 1:4:8 concrete block of size 60 cm x 60 cm x 75 cm including, excavation, refilling, transportation, and labour etc complete. Spec. No. As directed by Engineer in Charge |
