Sales : +91-777 804 8217
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 12-05-2025 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 19-05-2025 |
| Sl. No. | Item Description |
| 1 | Dismantling of old rusted plain or corrugated steel sheeting, any gauge, thickness,including Nainital or similar pattern roof covering etc. complete all as specified and as directed. |
| 2 | S&F pre-painted galvalume aluminum zinc coating GIbased corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as specified, compete all as specified and directed. (Colour as approved by GE) |
| 3 | M&L pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, facia and fixed with selftapping screws as specified. (Colour as approved by GE) |
| 4 | Dismantling timber scantlings 40Sq.cm and over in section, in any position complete all as specified and directed. |
| 5 | S&F rolled mild steel sections like angle, channel, flat etc as inframed work such as grills, gratings,etc,with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars; barred iron doors; ladders ; framed balusters; walk ways; railings; framed work of water tanks and similar work confirming toFe-290Gde E-165 complete all as specified & directed by Engineer-in-charge. |
| 6 | S&F mild steel roof trusses (framed), trussed, purlins, crane gantries. rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc, Fe 410-W (Grade E-250) complete all as specified and directed. |
| 7 | S&F compound girders and stanchions, lattice girders, aerial masts, staging for water tanks and the like including caps, bases, splices etc. built up from two or more beam or channel sections or angles with plates, including all lattice bars, stiffeners, gusset plates, etc. Fe-410 W(Gde-E-250) quality-B, complete all as specified and directed. |
| 8 | S&F plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes,without any attachment complete all as specified and directed. |
| 9 | Dismantling of wall & ceiling boards (fiber, pulp, insulation etc) or insulation boards /slabs /blanketsany thickness, including cover fillets complete all as specified and directed. |
| 10 | S&F clip-in false ceiling system with plain steel beveled edged tile (600mm X 600mm) manufactured out of 0.70mm aluminium sheet having powder coating with 60 microns polyester paint on front side. Two sides of each tile shall be rised and piped and stopped to ensure positive engagement into the spring clip-in profile allowing for demounting of individual tiles. The rigid suspension system consists of rows of galivanized steel 0.50mm thick clip-in profile of size 38mm X 20mm and installed at 600mm c/c spacing to support the tiels clilp-in profiles shall be suspended and jointed from galvanized steel \"C\" channels of size 10mm X 38mm X 10mm with hold on clamps at spacing as specified by manufacturer. Suspension angles shall be suspended from the roof structure by GI ceiling brackets as per manufacturer\"s instructions and jointed to the \"C\" channels. The tiles shall be held in place by pressure clips \"C\" at spacing as per manufacturer\"s instructions. GI wall angle shall be used on wall angle shall be used on wall of size 20mm X 30mm X 20mm and 0.50mm thick with matching the colour with tiles all as manufacturer\"s specification/insturctions and including necessary scaffolding all as specified and directed. |
| 11 | Providing and fixing tiled false ceiling of size 595x595mm in true horizontal level suspended on interlocking gypric metal grid of hot dipped galvanized steel section (galvanized @ 120 gms/sqm, both side inclusive) consisting of 3600mm long main \"T\" runner size 24x38mm and 0.30mm thick, 1200mm long cross \"T\" of size 24x25mm and 0.30mm thick, 600mm secondary cross \"T\" of size 24x25mm and 0.30mm thick, bottom exposed capping of width 24mm of all T-sections shall be of 0.25mm thick PPGI, wall angle is fixed along the perimeters of the ceiling to walls, partitions or columns etc with rawl plugs and wooden screws at 300mm centers Main\"T\" runners are then suspended from ceiling using GI sloted cleats of size 27x37x25x1.6m fixed to ceiling with 8mm dia and 45mm long dashfasterners, 4mm GI adjustable rods with galvanised butterfly level clips of size 85x30x0.8mm spaced at max 1200mm center to center along main T and not more than 150mm from spliced joints. The last hanger at the end of each main runner should not be greater than 600mm from the adjacent wall, then 1200mm long cross \"T\" is interlocked between the main \"T\" at 600mm center to center to form a grid of 1200x600mm and then secondary cross \"T\" of length 600mm is then interlocked at middle of the 1200x600mm grid to form grids of 600x600mm. Cross tees at the ends having length more than 600mm are to be supported independently. Finally white coloured Gyproc 8mm thick Dew Drop/Granular tiles of size 595x595mm having foil on back side & PVC paper on front side wrapped around edges to be placed in grid complete all as specified and directed. |
| 12 | Taking down wall panelling and similar work complete all as specified and directed. |
| 13 | S&F insulated PVC wall lining 25mm thick consisting of PVC insulated panels having expanded polystyene (EPS) stuck of 2mm thick with single side prelam PVC sheet duly fitted into the wall as per specifications complete all as specified and directed. |
| 14 | S&F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC frame as per specification complete all as specified and directed. |
| 15 | Demolition ofbrickwork or stone/boulder masonry built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc but excluding ashlar facing, dressed stone work precast concrete articles complete all as specified and directed. |
| 16 | M&L brick work with sub class \"B\" bricks, straight or curved on plan exc 6 m mean radius built in Cement mortar 1:4, complete all as specified and directed. |
| 17 | M&L walling of random rubble stone masonry uncoursed, brought upto course with best quality locally available harder stones such as granite, trap, basalt stone etc, well bonded, bedded and solidly hearted, built in CM 1:6 complete all as specified and directed. |
| 18 | All as per srl item No. 17 here-in-above but except stone.Note: Old stone obtained against dismantling/demolition shall be used) |
| 19 | M&L plain cement concrete 1:2:4 type B-1 using 20 mm graded stone aggregate cast in situ in lintels up to 1.5 m clear span, cills, steps, seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings up to 60 cm in height, copings, kneelers, apex stones, bed plates, water through and the like including weathering, slightly rounded or chamfered angles and throating including use of form work (straight or curved) complete all as specified & directed. |
| 20 | Demolition of cement concreteunreinforced in ground floors, kota stone, granite flooring, tiles flooring andpaving\"snot exceeding15cm thickness (below or above ground level) and removal unserviceable materials, debris and rubbish to a distance not exceeding 100m complete all as specified & directed. |
| 21 | M&L 50mm thick PCC 1:3:6 type C-2 (using 40mm graded crushed stone aggregate) as in plinth protection/footh path finished the surface even and smooth without using extra cement complete all as specified and directed. |
| 22 | M&L 75mm thick PCC 1:3:6 type C-2 (using 40mm graded crushed stone aggregate) as in sub base of floor complete all as specified and directed. |
| 23 | M&L machine pressed precast concrete interlocking paver block any shape and size conforming to IS 15658-2006 of 80mm thickness M-35 complete all as specified and directed. |
| 24 | M&L sand filling under floors or in foundation including watering and consolidation complete all as specified and directed. |
| 25 | M&L coloured tiles of size 400mm x 400mm x 12mm laid in floor over 15mm screed bed in CM 1:4 with grey cement and pigment any shape and size complete all as specified and directed. |
| 26 | M&L coloured chequered cement concrete tiles, machine pressed, factory made of size 300x300x25mm thick, with grey cement and pigment, set, jointed and pointed in neat cement slurry, laid in floors, over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed. |
| 27 | S&F 1000 litres capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including fixing fittings such as GInipple for inlet, outlet, washout and overflow etc,including 20mm size ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe including dismantling old cemented/asbestos water/PVC storage tank complete all as specified and directed. |
| 28 | S&F in repairs 20mm dia gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed. |
| 29 | Taking down chowkats or frames with shutters (without taking off shutters from the frames) n. exc. 1.5 sq.m each complete all as specified and directed. |
| 30 | Taking down chowkats or frames but with shutters (with outtaking off shutter from the frames) exc 1.5 sq.m but n. exc 4 sq.meach, complete all as specified and directed. |
| 31 | S&F factory made Pressed steel frames of size 125mm x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc. and providing one shop coat of primer and taring back side of frame, complete all as specified and directed. |
| 32 | S&F factory made Pressed steel frames of size 105mm x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc.complete all as specified and directed. |
| 33 | S&F factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 35mm thick comprising of virgin polymer of k value 58-60 (Suspension Grade) calcium carbonate and natural fibres (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 Kg/cum and screw withdrawal strength of 1800 n (face) & 900n (edge), minimum compressive strength 50n/mm2 modulus of elasticity 850 N/mm2 and resistance to spread of flame of class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhessive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk SS screw complete all as specified and directed. |
| 34 | S&F factory made single extruded WPC (Wood Polymer Composite) glazed and skeleton shutter of size 35mm thick open rebated prepared to receive glass gauge etc without sash bars for securing glass, gauge etc comprising of virgin polymer of k value 58-60 (Suspension grade) calcium carbonate and natural fibres (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 Kg/cum and screw withdrawal strength of 1800 n (face) & 900n (edge), minimum compressive strength 50n/mm2 modulus of elasticity 850 N/mm2 and resistance to spread of flame of class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhessive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk ss screw complete all as specified and directed. |
| 35 | S&F factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibres (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 Kg/cum and screw withdrawal strength of 1800N (Face) & 900N (edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and directed.Note: Stainless steel butt hinges shall be paid separately. |
| 36 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 37 | M&L Vitrified Ceramic tiles light shade 10mm thick (square / rectangular), area of each tiles exceeding 0.42 sqm but not exceeding 1.00 Sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match with and including 15 mm thick screed bed in CM 1:6 complete all as specified and directed. |
| 38 | M&LNon-skid, joint free coloured ceramic tiles 7 to 8mm thick (Square/rectangular) area of each tile exc 0.11 sqm but not exc 0.18 sqm as in floors etc laid over and including 15mm thick screed bed or bedding layer in cement mortar 1:6, set and jointed in neat cement slurry and pointed with white or coloured cement to match the colour of tiles complete all as specified and directed. |
| 39 | M&L Glazed ceramic coloured/white tiles in vertical surface 350mm x 250mm x 7mm/450mm x 350mm x 7mm/450x300x7mm/600x300x7mm thick set and jointed in neat cement slurry,pointed in white or coloured cement to match the colour of tiles, over and including 10mm thick backing coatin CM 1:4 to receive tiles,complete all as specified and directed. |
| 40 | M&L 25mm thick PCC 1:2:4 type B-1 (using 20mm thick crushed stone aggregate) as in floor finished the surface even and rough to receive the topping layer complete all as specified and directed. |
| 41 | S&F anodised aluminium frame for doors, windows, ventilators with minimum thickness of powder coating 50 micron with one or more rebates including joining cleat for fixing etc. complete all as specified and directed. |
| 42 | S&F powder coated aluminium door shutters (thickness not less than 50 micron) aluminium section weighing 0.55 Kg/m including necessary joining cleats, glazing clips, rubber neoprene packingn, handle 02 Nos in each door, hinges, anodised aluminum snap beading screws etc complete all as specified and directed. |
| 43 | S&F powder coated aluminium window and ventilator shutters, side hung type without sash bar (thickness not less than 50 micron) aluminium section weighing 0.55 kg/m including necessary jioning cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (01 No.) hinges type B-21 100mm long (02 Nos.) suitable handle (01 No.) complete all as specified and directed. |
| 44 | S&F anodised aluminium powder coated window of any type (two/three track) sliding type aluminium powder coating 50 micron and aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprane packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as suitable handle (01 No.) locking and sliding system complete all as specified and directed. |
| 45 | M&L sheet glass, 4mm thick ordinary quality and glazing exc 0.5 sqm in each pane complete all as specified and directed. |
| 46 | M&L sheet glass, 4mm thick ordinary quality and glazing and frosted, on one side exc 0.5 sqm in each pane complete all as specified and directed. |
| 47 | M&L solar control film 25 micron reflective type sticked to glass panes exc 1.5 sqm as per instructions of manufacturer\"s complete all as specified and directed. |
| 48 | S&F stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed. |
| 49 | S&F 150 mm size extruded aluminium alloy handles, cast type, anodised complete all as specified and directed. |
| 50 | S&F 150 mm size (length of bolt) aluminium anodised, barrel tower bolts of extruded sectioncomplete all as specified and directed |
| 51 | S&F 200mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed. |
| 52 | S&Faluminium (extruded section body) door closer hydraulically regulated, designation No. 3 universal type suitable for door shutter of 851 to 1000mm in width and of weight between 61 to 80 Kg complete all as specified and directed. |
| 53 | Taking up or down 15mm bore steel water tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed. |
| 54 | Taking up or down 20mm bore steel water tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed. |
| 55 | S&F steel water tubing, 15 mm bore, galvanised , \"medium grade\" with all fittings and fixtures and short lengths, fixed to wall and ceiling or laid in floor including cutting chases for concealed work in required etc, complete all as specified and directed. |
| 56 | S&F steel water tubing, 20 mm bore, galvanised , \"medium grade\" with all fittings and fixtures and short lengths, fixed to wall and ceiling or laid in floor including cutting chases for concealed work in required etc, complete all as specified and directed. |
| 57 | S&F in repairs vitreous china wash down water closet pan (pedestal pattern) one piece with flushing cistern white with \"S\" trap connected to drain or out going pipe andn flushing pipe complete including PVC sheet cover closed recessed type with flat bottom and cover with mild steel chromium plated or aluminium hinging device complete all as specified and directed.Make: Jaquar/Kohler/Cera or equivalent make as approved by GE. |
| 58 | S&F health faucet (ABS body) mild steel chromium plated suitable for 15mm dia pipe with 1.25 mtr long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed. |
| 59 | S&F in repairs CP jet spray hygenic spray for 15mm bore dia fitting 1 to 1.5 mtr long tube acrylic type complete all as specified and directed. |
| 60 | S&F in repairs 1200mm x 600mm bevellededge mirror of selected quality with 4.5mm thick polished glass, mounted on 6mm thick AC plain building board or commercial ply wood and fixed to wooden plug with chromium plated brass screw and cup washers complete all as specified and directed. |
| 61 | S&F in repairs 15mm bore angle valve, CP fancy type, two way screwed down, high pressure with crutch or butterfly handle, screwed both ends (externally threaded) complete all as specified and directed |
| 62 | S&F in repairs concealed type with wall flange, stop valves 15mm bore, cast copper alloy, fancy type chromium plated screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and directed. |
| 63 | S&F in repairs oval (colour as directed) counter wash basin of size 560x470x205mm incl CP coupling and waste pipe complete all as specified and directed. |
| 64 | S&F in repairs CP swan neck type pillar taps fancy type 15mm bore cast alloy with capasten head screwed down high pressure with or without lettered \"Hot\" or \"Cold\" with long screwed shanks and fly-nuts screwed complete all as specified and directed. |
| 65 | S&F in repairs fancy type, chromium plated, bib tap,cast copper alloy with crutch or butterfly handle, screwed down, screwed for 15 mm bore iron pipe or for brass ferrule complete all as specified & directed. |
| 66 | S&F in repairs brass chromium plated mixture for mixing hot and cold water for Bath/WHB, screwed down iron pipe for 15mm dia bore pipe, complete all as specified and directed. |
| 67 | S&F in repairs chromium plated toilet paper holder standard quality complete all as specified and directed. |
| 68 | S&F in repairs soap dish any type fixed to plugs with chromium plated brass screws complete all as specified and directed. |
| 69 | S&F in repairs brass chromium plated shower rose 125mm size, with or without swivel joints, including shower arm 15mm size, 195mm long with bend of 45 degree with flange of PTMT any colour, fixing to steel pipe or unioncomplete all as specified and directed. |
| 70 | S&F sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60cm long complete all asspecified and directed. |
| 71 | S&F in repairs brass chromium plated tubular towel rail, 20mm dia, \"D\" type, 60cm long between flanges complete all as specified and directed. |
| 72 | S&F sink with drainage made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connection union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed. |
| 73 | S&F in repairs PVC connection 15mm size, 450 mm long with PTMT nuts complete all as specified and directed. |
| 74 | S&F waste pipe of polyethylene of low or high density of PVC 32 mm dia complete all as specified and directed. |
| 75 | Demolition of cement concrete (reinforced) in ground floor and paving not exc 15cm thickness (below or above ground level) complete all as specified and directed. |
| 76 | M&L PCC 1:2:4 type B-1 (using 20mm graded crushed stone aggegate) as in cover slabs, shevles and other similar work complete all as specified and directed. |
| 77 | S&F mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 78 | M&L RCC 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) as in roof slabs supported on walls, beams and columns in floor, roofs, landings, balconies, deck slabs and in shelves with including formwork and the like complete all as specified directed. |
| 79 | Form work to rough finished surfaces of concrete for soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) flat or curved complete all as specified and directed. |
| 80 | Taking down cement or cement lime plaster, any description on brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water etc and removal of rubbish off the premises and leaving the work clear of any plastering complete all as specified & directed |
| 81 | M&L rendering 15mm thick plaster in CM 1:6 on brick or concrete surface or other than fair faces of brick masonry, finished the surface even and smooth without using extra cement complete all as specified and directed. |
| 82 | M&L rendering 15mm thick plaster in CM 1:4 on brick or concrete surface or other than fair faces of brick masonry, finished the surface even and smooth without using extra cement complete all as specified and directed. |
| 83 | M&L distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gm/litre of approved manufacturer of required shade and colour complete as per manufacturer\"s specification two or more coats over 2mm wall care putty on new surface of wall including preparation of surfaces complete all as specified and directed. |
| 84 | M&L distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gm/litre of approved manufacturer of required shade and colour complete as per manufacturer\"s specification two or more coats over 1mm wall care putty on old surface of wall/ceiling including preparation of surfaces complete all as specified and directed. |
| 85 | M&L applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance dirt resistance exterior paint of required shade (company depot tinted) with silicon additives @ 1.43 litre/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm over new surfaces of wall complete including preparation of surfaces of walls complete all as specified and directed. |
| 86 | M&L applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance dirt resistance exterior paint of required shade (company depot tinted) with silicon additives @ 1.43 litre/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm over old surfaces of wall complete including preparation of surfaces of walls by complete removal of existing treatment complete all as specified and directed. |
| 87 | M&Lpreparing new surface of steel of any description, over 10cm width or girth not other wise described and applying two coats of synthetic enamel paint over a coat of red oxide, zinc chrome primer, complete all as specified and directed. |
| 88 | M&L preparingof new wooden surfaces of any description not otherwise described over 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed. |
| 89 | Dismantling 75/100mm dia CI/PVC pipe fixed to wall or laid in floors or trenches including connection complete all as specified and directed. |
| 90 | S&F 75mm bore PVC (SWR) pipesingle socketed, in any length with rubber ring joints fixed to walls/ laid in trenches or in floors, complete all as specified and directed. |
| 91 | S&F 110mm bore PVC (SWR) pipesingle socketed, in any length with rubber ring joints fixed to walls/ laid in trenches etc complete all as specified and directed. |
| 92 | S&F 75mm bore PVC (SWR) bends complete all as specified and directed. |
| 93 | S&F 75mm bore PVC (SWR) junction,(single T) with oval access door complete all as specified and directed. |
| 94 | S&F 110mm bore PVC (SWR) bends complete all as specified and directed. |
| 95 | S&F 110mm bore PVC (SWR) junction,(single T) with oval access door complete all as specified and directed. |
| 96 | S&F CP grating 100mm dia of PTMT (minimum weight 25 gms), complete all as specified and directed. |
| 97 | S&F 75 mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed . |
| 98 | S&F 110mm dia PVC (SWR) vent cowl complete all as specified and directed. |
| 99 | M&L 125/110mm dia PVC (SWR) gully trap, setting and jointing with solvent cement complete all as specified and directed. |
| 100 | M&L PCC 1:3:6 type C-2 (using 40mm graded crushed stone aggregate) as in surface channel and drains complete all as specified and directed. |
| 101 | M&L extra for forming fair finished drain or channel 30cm inner girth in cement concrete, using extra cement, including forms, moulds, mi- tred/stopped ends etc. complete all as specified and directed.(inner girth only measured) |
| 102 | M&L 20 mm thick granite (of any type) work (table rubbed and polished and moulding of outer edges) in steps, jambs and pillars, window cills, cooking platforms and the like including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite with and including 15mm thick screed bed in CM 1:4,complete all as specified and directed. |
| 103 | S&F 18/19mm thick prelaminated WPC board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work complete as directed by Engineer-in-charge. |
| 104 | S&F 40 mm size (Width of flaps when open) continuous paino hinges, mild steel, bright finish or electrogalvanisedcomplete all as specified & directed. |
| 105 | S&F wooden lipping complete all as specified and directed. |
| 106 | S&F ball bearing runners 45mm telescopic (KTS-20) full extension load capacity 50 kgs complete all as specified and directed. |
| 107 | S&F stainless steel handles 100mm size for kitchen cabinet shutters fixed in repair complete all as specified and directed. |
| 108 | S&F chromium plated stainless steel wire basket (storage basket) pull out type for large utensils size 480x500x150mm of Grade 304 with necessary fixing clips etc fixed in repair complete all as specified and directed. |
| 109 | S&F chromium plated stainless steel wire basket (cup and saucer basket) pull out type for large utensils size 480x500x100mm of Grade 304 with necessary fixing clips etc fixed in repair complete all as specified and directed. |
| 110 | S&F chromium plated stainless steel wire basket (plate basket) pull out type for large utensils size 480x500x100mm of Grade 304 with necessary fixing clips etc fixed in repair complete all as specified and directed. |
| 111 | S&F chromium plated stainless steel wire basket (cutlery basket) pull out type for large utensils size 480x500x100mm of Grade 304 with necessary fixing clips etc fixed in repair complete all as specified and directed. |
| 112 | S&F PVC coated mild steel conduit pipe 25mm dia (Drapery rod) with PVC coated MS clamps to hold drapary rod and decorative attachment at one or both ends of drapary rod, fixed to opening of door/windows, each opening n exc 1.50 mtr, contained with a pair of clamps and ap pair of side ornamental attachments complete all as specified & directed. |
| 113 | S&F 150mm size (overall length of cover plate) foor door stopper of brass body and tongue with hard drawn steel spring, fixed in floor, complete all as specified and directed. |
| 114 | M&L providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc. including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc. of required size, on the top of floor or the side of waist slab with suitable arrangement complete all as specified and directed. |
| 115 | Excavation post holes (or similar holes) in any type of soil each n exc 0.50 cu.m,getting out,returning,filling on and ramming earth or broken rubble mixed with earth around,in layers not exceeding 25cm, watering and removing surplus soil to a distance not exc 50m in hard/loose soil and making good surface complete all as specified and directed. |
| 116 | M&L PCC 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) as in foundation filling and mass concrete complete all as specified and directed. |
| 117 | Taking down carefully existing aluminum / copper point wiring (light, fan, socket or power point) complete of any description including fitting such as switches, ceiling roses, pendants, tube light fitting, ceiling fan with regulators, sockets, wooden boards, laminated sheets from sunken boxes, boards, shades light fitting etc and making good the disturbed surfaces of walls, floors, ceiling etc to match with existing surfaces complete all as specified and directed. |
| 118 | Taking down un-serviceable DB of any size and capacity including MCB etc, and removing materials to store for keeping in safe custody or for taking credit and making good disturbed surfaces of walls,floors, etc, complete all asspecified and directed. |
| 119 | M&L, concealed point wiring with PVC insulated and unsheathedelectric cable 1100 volts grade single core FRLSH confirming to IS 694:2010 having multi stranded copper conductor of 1.5 Sqmm nominal cross sectional area (ISI marked with valid CML No) drawn in and including concealed non metallic rigid PVC conduit medium grade( ISI marked with valid CML No)not less than 20 mm dia confirming to IS 14930 (Part-I) 2001,with all fitting and fixing accessories and1.5 Sqmm FRLSHPVC insulated unsheathed multistranded copper conductor cable as continuous earth conductor, connected to common earth dolly by providing suitable lugs with & including pressed steel sunken terminal boxes factory made for mounting switch, regulators etc with and including Modular white cover plate ISI marked, fixed with brass screws and cup washers duly painted with two coats of anti corrosive paint/black bituminous paint outside and two coats of aluminium paint insidefor mounting switches. sockets etccomplete all as specified and directed. |
| 120 | Description all as per serial item No 119 here-in-before but one 5pin, 6 Amp socket outlet on same boardcomplete all as specified and directed. |
| 121 | Description all as per serial item No 119 here-in-before but one 5pin, 6 Amp socket outletindependent complete all as specified and directed. |
| 122 | Description all as per serial item No 119 here-in-before but for one 5 pin socket outlet 16 Amps on independent board with cables 2.5 sqmm for phase and earth wire of size complete all as specified and directed. |
| 123 | S&F Modular Switch one way 6 Amp, one module 240 volts ISI marked complete all as specifiedand directed. |
| 124 | S&FSocket, 6A - 2/3 pin combined 2 module, 240 volts ISI marked complete all as specified and directed. |
| 125 | S&F Socket 6A/16A - 2/3 pin combined 2 module, 240 volts ISI marked complete all as specified and directed. |
| 126 | S&F Modular switch 1 way 16 A, 1 module, 240 volts ISI marked complete all as specified and directed. |
| 127 | S&F Modular Fan step regulator, 120W 1 module, 240 volts ISI marked complete all as specified and directed. |
| 128 | S&F Modular white cover plate 8M complete all as specifiedand directed. |
| 129 | S&F Modular white cover plate 6M complete all as specifiedand directed. |
| 130 | S&F Modular white cover plate 3M complete all as specifiedand directed. |
| 131 | S&FSingle pole and neutral enclosure with 1 two pin and earth plug and a socket complete with one single pole MCB, 20 Amp, 240 volts ISI marked complete all as specifiedand directed. |
| 132 | S&Fceiling rose, 3 terminal surface type complete all as specifiedand directed. |
| 133 | S&Fangle lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittingscomplete all as specified and directed. |
| 134 | S&F Decorative ultra slim LED Tubelight fitting of LEDwith extruded polycarbonate, enviormental friendly energy efficient ready to use, 20 watt, 6500K fitting, incluing reqd length of not less than 1.0 Sqmm PVC multistranded BIS marked 03/02 core copper conductor forelectrical connection from ceiling rose to connector of LED fitting including testing on completion all as specified and directed. |
| 135 | S&F street light bracket made out of 32 mm dia GI light grade tubing not less than 1.5 Mtr long bend to shape including pole clamps made out of 40 x 5 iron strip and nut bolts and washers, complete all as specified. |
| 136 | Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed. |
| 137 | M&Ldistribution board sheet steel powder coated for MCB with rated bus bar and neutral link earthing stud SPN 8 way 240 volts double door complete all as specified and directed.Note:- Distribution board and MCB\"s should be same make. |
| 138 | S &F in replacementof SPN 40 Amp rating 240V, 10KA \"C\" curve miniature circuit breaker (MCB) current carrying capacity in the MCB DB complete with connection testing and commissioning complete all as specified and directed. |
| 139 | S&F in replacement 240V, 10 KA \"C\" curve miniature circuit breaker (MCB) of single poles and current carrying capacity 6 to 40 Amp, in the MCB DB complete with connection testing and commissioning complete all as specified and directed. |
| 140 | Earthing complete with galvanised iron earth plate electrode of size 600mm x 600mm x 6mm thick buried directly under ground vertically to a depth not less than 2.25 metre below ground level with top edge of the earth plate at a depth not less than 1.5 metre below ground level ,connected to galvanised earth lead wire 4.0mmby means of bolts, nuts, check nuts, washer including test point by means of bolts, nuts, check nuts, and washers of galvanized iron and connected to main switch / control board up to 7.5 metre away from earth electrodeand including GI pipe light grade 40mm bore protection pipe & necessary excavation and earth work in any strata, PCC chambers in PCC 1:3:6 type B1, RCC 1:2:4 type B1 cover slab 50mm thickwith 8mm dia TMT bars at 140mm C/C both ways,with lifting handle, watering pipe of GI medium grade 40mm dia, wire mesh, funnel, lugs and charcoal, salt etc all as applicable and as per plate No 3 of SSR Part-I and all as specified. |
| 141 | Disconnecting/ Taking down Ceiling Fan/ Exhaust fan of any sweep removing and cleaning the dust properly, painting with same colour good quality synthethic enemelled paint after preparing surface for painting with existing color shade oiling and greasing of bearing including refixing and making the conection and testingcomplete all as specified and directed. |
| 142 | M&L cutting and taking out old burnout winding of any sweep ceiling fan/Exhaust fan and rewinding with same gauge of copper winding wire of superior quality including insulation materials varnishing etc and testing completeto entire satisfaction of Engineer- in- charge. |
| 143 | Disconnecting water heater and taking in safe custody/ refixing the same including fastner and making the conection and testingcomplete all as specified. |
| 144 | Supply and fix in repair electronic meters temper proof LCD display with polycorbonate cover Single Phase230 V ,10-60A accuracy class -1 50 Hz ,Conforming to IS 13779 ,IP-54, withh parameters to show data , time , Current reading ,load ,PF , voltage , & KWH all as specified and directed. |
| 145 | Supplying laying and testing cable XLPE insulated screened PVC bedded galvanised steel strip or wire armoured electric power cables (heavy duty) 1100 volta grade with stranded aluminium conductor of size 16 Sqmm , 2.0 core flatcable complete all as specified. |
| 146 | Excavation in trenches n exc 1.5 m wideand n exc 1.5 mtr in depth for foundation laying of under ground cable erecting of pole stay not exc 10 sqm on plain and not exc 1.5 m depth and getting out in any type of soil complete all as specified and directed. |
| 147 | Returning, filling in (soil ) including spreading, levelling, watering and well ramming in layers not exc 25cm in any type of soil complete all as specified and directed. |
| 148 | Removal ofexcavated material (soil) to a distance n exc. 50m and depositing where directed at a level n exc. 1.5m above the starting point complete all as specified and as directed. |
| 149 | M&L for sand cushioning to under ground cable with a layer of sand 8cm before laying the cable and 15cm after laying the cable (10cm punned thickness above the top of the upper most cable, total 18 cm), complete all as specified and directed. |
| 150 | M&L for sub class ‘B’ brick old size protection cover laid dry flat transversally along the length of cable on cushioning with width equal to the length of brick complete all as specified and directed. |
| 151 | Material and labour for GI tubing (light grade) with all fitting laid in trenches or along pole/bldg or under road crossing and protection pipe or fixed alongwith wall/pole with necessary clamp nut bolt and washer bore of pipe 40mm complete all as specified and directed. |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
