|
| 1 | Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :1:1.5:3 (1 cement: 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 2 | Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - -All work upto plinth level: 1:4:8 ( 1 Cement: 4 coarse sand: 8 graded stone aggregate 40 mmnominal size) |
| 3 | Centering and shuttering including strutting, propping etc. and removal of form for:Foundations, footings, bases of columns, etc. for mass concrete. |
| 4 | Reinforcement for R.C.C.work including straightening, cutting, bending, placing in position and binding all complete. Above Plinth level Thermo-Mechanically Treated bars |
| 5 | Half brick masonry with Ist class common burnt clay F.P.S. (non modular) bricks in superstructure above plinth level up to floorVlevel in Cement mortar 1 : 4 (1 cement : 4 coarse sand) |
| 6 | Providing and fixing 18mm thick gang saw cut mirror polished(premoulded and prepolished) machine cut for kitchen platforms,vanity counters ,window sills , facias and similar locations ofrequired size of approved shade, colour and texture laid over20mm thick base cement mortar 1:4 (1 cement : 4 coarse sand)with joints treated with white cement, mixed with matchingpigment, epoxy touch ups, including rubbing, curing moulding andpolishing to edge to give high gloss finish etc. complete at all levels.Area of slab upto 0.50 sqm |
| 7 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fastener of required dia andlength(hold fast lugs or dash fastener shall be paid for separately: Local best quality Tolhao wood. |
| 8 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fastener of required dia andlength(hold fast lugs or dash fastener shall be paid for separately: Local best quality Teak wood |
| 9 | Providing and fixing 25 mm thick shutters for cupboards etc.including ISl marked black enamelled M.S. butt hinges withnecessary screws : Ist class Teak wood |
| 10 | Steel work in built up tubular (round, square or rectangular tubes etc.)trusses etc., including cutting, hoisting fixing in position and applying a priming coat of approved steel primer, including welding and bolted including special shaped washers etc.complete.Hot finished welded type tubes |
| 11 | Providing and laying vitrified floor tiles in different sizes(thickness to be specified by the manufacturer) with waterabsorption’s less than 0.08% and conforming to IS : 15622 ofapproved make in all colours and shades, laid on 20mm thickcement mortar 1:4 (1 cement: 4 coarse sand) including groutingthe joints with white cement and matching pigments etc.,complete. Size of Tile 600 x 600 mm |
| 12 | Providing and fixing false ceiling with 12 mm thick plain/ semiperforated or with design ceiling tiles of BWP type phenolformaldehyde synthetic resin bonded pressed particle boardconforming to IS:3087 finished with a coat of aluminium primer onboth sides & edges and two coats of synthetic enamel paint ofapproved quality on exposed face fixed to a grid made out ofanodised aluminium (with 15 micron anodic coating) T-sections 35x15 x1.5 mm size main runners and cross runners 23.5x19x1.5 mmfixed to main runners placed 600 mm centre to centre both waysso as to form a grid of 600 mm square. The frame work shall besuspended from ceiling by level adjusting hangers of 6 mm dia M.Srod fixed to roof slab by means of ceiling cleats. The suspendersshall be placed 600x 1200 mm centre to centre including fixing tothe frame with C.P brace screws and applying a priming coat ofzinc chromate yellow primer (aluminium frame work shall be paidseparately.) |
| 13 | Providing corrugated G.S. sheet roofing including vertical/curvedsurface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I. limpet washers or with G.I.limpet washers filled with white lead and including a coat ofapproved steel primer and two coats of approved paint onoverlapping of sheets complete upto any pitch in horizontal/vertical or curved surfaces) excluding the cost of purlins, raftersand trusses and including cutting to size and shape whereverrequired. 0.63 mm thick with zinc coating not less than 275gm/sqm |
| 14 | Providing ridges or hips of width 60 cm over all width plain G.S.sheet fixed with polymer coated J. or L hooks, bolts and nuts 8 mmdia. G.I. limpet and bitumen washers complete. 0.63mm thick with zinc coating not less than 275gm/m2 |
| 15 | Providing and fixing 15 cm wide 45 cm over all semi circular plainG.S. sheet gutter with iron brackets 40x3mm size, bolts, nuts and washers etc. including making necessary connections with rainwater pipes complete. 0.63mm thick with zinc coating not less than 275gm/m2 |
| 16 | 12 mm cement plaster of mix: 1:4 (1 cement : 4 fine sand) |
| 17 | Providing and applying white cement based putty of average thickness 1mm,of approved brand and manufacturer, over theplastered wall surface to prepare the surface even and smooth complete. |
| 18 | Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. Two coat |
| 19 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built-up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom and sides with required EPDM rubber/ Neoprene gasket etc. Aluminium sections shall be smooth, rust-free, straight, mitred and jointed mechanically wherever required including cleat angle,Aluminium snap beading for glazing / panelling, C.P. brass /stainless steelscrews, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing and panelling tobe paid for separately):Powder coated aluminium (minimum thickness of powder coating 50 micron) |
| 20 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. withE PDM rubber/ neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge. (Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 8 mm thickness |
| 21 | Providing and fixing wall paper of approved. Quality Materials : Unitex Elegant or equivalent (washable) to give an even shed. |
