Tender For Up gradation Of Tt Parking No. 1 In Jnpa; 1 FRP Chamber Cover .size 600mm x 600mm as directed by engineer in charge 2 Design, Supply, Installation and Testing of Sewage Treatment Plant of Commission 25 KLD with Commissioning Including of 5-10mm Spacing SS Bars, 1665 FRP Vessel Top Opening, Protected Surface Area450m2 Specific Gravity 0.9 MOC Virgin PP, 750 MM V shape Black, MOC Virgin PP, Pipes and Fittings (MS and cPVC) pipe, 1.5 m3/Hr., 15 M Head, Submersible Sewagepumps, 1.0 m3/Hr., 10 M Head,Self Priming Pumps, 1.5m3/Hr., 35 M Head Filter Feed Pumps, Air Blowers with a lot of Diffusers 50m3/Hr., 4000 MMWG Head, Motor as drive for blowers 1440 RPM, 3 Phase, 40 RPM, 0.5 kw 0.75HP Agitator, 6 LPH, 240 V, Single Phase pump with 40 Ltr chemical-storage, Control Panel & Cable. 3 Supply Installation Testing and Commissioning of Semi Integrated Hybrid Solar Lights with min lumens output 16800. The Solar light shall be of High Wattage of 120 Watt with LED Light Lumens Efficaciy of 140/watt. The Battery shall be of 54ah 25.6v with Solar Panel of 335W The Light Fitting shall be having dimming facility post 4 hours to sustaing Backup time of min 10- 12 Hours. The light shall be supplued with IEC Certified Solar PWM / MPPT Charge Controller System withMNRE/BIS Approved Polycrystalline Solar Panel and BIS Certified Lithium Ferro Phosphate Battery. The body shall be Die-Cast Aluminium with Whether proof Protection of IP65. The Hybrid Solar Lights shall be supplied with Complete accessories and shall come along with min 2 Years warranty. The System shall be supplied post approval of Engineer in Charge. The Approved Make Shall be Philips, Bajaj, MAPLux, Wipro, NERI, Lighting Technologies only 4 Supply Installation Testing and Commissioning of Semi Integrated Hybrid Solar Lights with min lumens output 25200, High Wattage 180 Watt with LED Light Lumens Efficaciy of 140/watt. The Battery shall be of 84ah 25.6v with Solar Panel of 450W The Light Fitting shall be having dimming facility post 4 hours to sustaing Backup time of min 10-12 Hours. The light shall be supplued with IEC Certified Solar PWM / MPPT Charge Controller System withMNRE/BIS Approved Polycrystalline Solar Panel and BIS Certified Lithium Ferro Phosphate Battery. The body shall be Die-Cast Aluminium with Whether proof Protection of IP65. The Hybrid Solar Lights shall be supplied with Complete accessories and shall come along with min 2 Years warranty. The System shall be supplied post approval of Engineer in Charge. The Approved Make Shall be Philips, Bajaj, MAPLux, Wipro, NERI, Lighting Technologies only 5 Supply Installation Testing and Commissioning of Semi Integrated Hybrid Mini Mast with 12 Meter Height with 100w Flood lights with total 5 Numbers of Lights per mini mast Batttery type 48ah*8 25.6v with panel 335w*8 with Min Lumens Output 70000 with Complete System Wattage of 500 Watt. The System shall be supplied post approval of Engineer in Charge.The Approved Make Shall be Philips, Bajaj, MAPLux, Wipro, NERI,Lighting Technologies only 6 Supplying and erecting 25 m (clear height) motorized high-mast (Top-200mm, Bottom- 560 mm) hot dipped galvanized material with average minimum thickness 65 micron, made from high tensile structure grade steel as per BSEN -10025 S355/E350 & 3+4+5 mm thickness, with base plate 25 mm thick x OD 730 mm grade as per IS-2062, pole made in signal section & submerge arc welded, with lowering & raising motorized unit, wire rope stainless steel - 316 grade 2 nos., 7x19 construction 6 mm, SG- DG U clamps, double drum winch assembly 600 kg, 5x2.5 sq.mm flexible copper cable with lantern carriage assembly suitable for max. 16 nos. luminaries and its control gear box, lightning arrestor, arrangement for fixing aviation light, night glow reflector on pole at suitable height, high-mast with serial number, factory inspection report/test report of high- mast should be provided as per specifications on provided foundation J type stud/bolts with double check nuts & necessary accessories complete. specification no. OHPL/HM 7 Making M-20 cement concrete foundation suitable by considering the safe soil bearing capacity at site as 10 T/sq.m at 2m depth including excavation and fixing provided nut bolts with the help of template, duly plastered as per design complete(for 25m high mast). 8 Supplying and erecting outdoor stand mounted feeder pillar for high-mast of the same manufacturer with 63A TPN MCB incomer, 24hr astronomical time switch with minimum 5 Years battery backup, 45 A TP contactor for automatic switching of luminaries, 2 no 9A contactors and raise/lower push button, and provision for termination of adequate size of incoming and outgoing cables complete erected in min. 14 SWG CRCA sheet box powder coated with supporting angles, self lock, gasket and slanting top erected on CC foundation complete. 9 Supplying and erecting integrated LED flood light fitting Max. 195W IP65 & IK07 class having pressure die-cast aluminium housing, having system lumens output of Min. 23400 Lumens, min. efficacy of 120 lumen/W, CRI>70, CCT upto 6500K, THD<10%, p.f. >0.90, operating range of 140-270V, inbuilt surge protection of 4 kV, Life class of 50,000 Hrs at L70B50 including driver with U shaped bracket with minimum 2 Years warranty as per specification No. FGODF/FL. 10 Cables as per above 11 Supplying and erecting outdoor stand mounted feeder pillar for high-mast of the same manufacturer with 32A TPN MCB incomer, 24hr astronomical time switch with minimum 5 years battery backup, 25 A TP contactor for automatic switching of luminaries, 2 no. 9A contactors and raise/lower push button, and provision for termination of adequate size of incoming and outgoing cables complete erected in min. 14 SWG CRCA sheet box with supporting angles, self lock, gasket and slanting top erected on CC foundation complete. 12 Supplying and erecting integrated LED Bollard Cylindrical / Cubical shaped 800mm 8W IP65 & IK10 class having extrusion aluminium housing with polycarbonate diffuser, having system lumens output of Min. 800 Lumens, min.efficacy of 100 lumen/W, CRI>80, CCT upto 6500K, THD<10%, p.f. >0.90, operating range of 140-240V, inbuilt surge protection of 2 kV, Life class of 25,000 Hrs. at L50B50, including driver complete with minimum 2 Year warranty as per specification No FG- ODF/BL. 13 S/I/T/C of Electric Motor Driven Fire Pump set of 1600 LPM @ 56 m head, with Bronze Impeller, Motor, Coupling, Base Plate and foundation bolts matching flanges with gasket and fastners wth all complete. 14 S/I/T/C of Diesel Engine Driven Fire Pump set of 1600 LPM @ 56 Mtr head with Bronze Impeller, Engine, Base plate, coupling with coupling guard, foundation bolts, automatic air release valve, fuel tank with engine exhaust line silencer, matching flanges with gasket and fastnersand battery with battery charger including 100% standby 15 S/I/T/C of Electric Motor Driven Jockey Fire Pump set of 280 LPM & 70 Mrs. Head with Bronze Impeller, Motor, Base Plate, foundation bolts and matching flanges with gasket and fastners. 16 S/I/T/C of Electric Driven Booster Pump of cast iron body and Bronze Impeller with stainless steel shaft, mechanical seal and floor of 900 LPM & 35 m conforming to IS:5120 suitable HP, SQ cage induction motor suitable for opeMtrion on 415 Volts. 17 S/I/T/C of Diesel Engine Starter Control Panel Solid-State, as per Spec. Wall mounted type for the Auto& Manual OpeMtrions of the Pump set, etc, along with the Battery Charger Power & ControlCabling from the Engine to Control Panelwith Earthing & Inter-locking, having, Fuses AC / DC type, P.L.C.Based, Switches, Meters, Audio / Visual Alarms and IndicatingLamps, with Analogue Solid State Designs, with 3 Cold Impulses Starter for Deisel Engine of StandbyPumpset with Sequential OpeMtrion Circuitries. 18 SITC of Pressure Gauges with Syphon Tube and Cock 150mm Dial Range - 0 to 1kg /cm2. 19 SITC of Pressure Switches with Tubing, Control Cabling upto Panel, complete. 20 SITC of MS ERW Piping as per IS : 1239,part-I, heavy grade up to 150 NB and IS:3589, 6.35 mm thickness, including pipe fittings ,flanges, pipe supports such as c clamps, threaded rods, fastners. 21 200 mm NB C Class 22 150 mm NBC Class 23 100 mm NB C Class 24 SITC of 150 NB Four way Fire Brigade Inlet Connection having inbuilt non. return valve with 04 nos. of 63 mm GM instantaneous inlets for fire water tank. 25 SITC of Non Return Valves Dual plate with Matching Flanges, bronze internal, EPDM seat, 200 psi Mtring, suitable horizontal & vertical installation. 65 mm NB 26 SITC of Air Vessel Tank 300 NB x 1.2 mtrs. 27 SITC of Ball Valve 28 Cabling from motor toStarter with copper earthling Strip within the pump house 29 SITC of MS ERW Black Pipe as Per IS : 3589 / 6.3mm thick & IS 1239 / II C Class, with fittings IS 1239/II heavy grade including MS plate fabricated flange to ASA 150 LBS Mtring with accessories plus consumable for Underground pipes protection with by coating & wrapping with anticrrosive tape complete with required structural support if any as per spec 30 150 mm NBC Class 31 100 mm NB C Class 32 80 mm NB ‘C’ Class 33 SITC of MS ERW Black Pipe as Per IS : 3589 / 6.3mm thick Gr. Fe 410 & IS 1239 / I- C Class, with Fittings to suiitable pipe Fabricated IS : 3589 / 6.3mm thick / IS : 1239 / II - Heavy Grade, including MSPlate Fabricated Flanges to IS / DIN / ASA 150 LBS Mtring & Above ground Pipe Protection (Painting)and all required supports etc. 34 150 mm NBC Class 35 100 mm NB C Class 36 80 mm NB ‘C’ Class 37 SITC of oblique type stainless steel single headed hydrant valve with 63mm female instantaneous outlet angled towards ground as per IS 5290-Type A, including matching flanges ,bolts ,studs, nuts, washers, gaskets. 38 External 39 Internal 40 SITC of stainless steel body Orifice plate of suitable inner bore along with matching flange. 41 SITC of M. S. Hose Box of size 750 x 600 x 250mm-16swg thick fire red color from outside & white enamal from inside - front glass paited with fire with key, handle and brass hinges -to accommodate 2 nos of 15mtrs long hose and 1 branch pipe. 42 External 43 Internal 44 SITC of 63mm dia stainless steel universal branch pipe as per IS 2871 45 SITC of Fire fighting hose as per IS 14933 ( Type -A) . The fire hose shall be 15 mtrs long with 63mm dia stainless steel couplings at both end 46 15 m Long 47 SITC of 150NB Four way Siamese Connection for hydrant network with 4 nos. of 63 mm instantaneous inlets in glass fronted wall box having inbuilt non return valve and 150mm BFV with fittings, nut, bolts & washers. 48 Parking Branding3D Signage : Prototyping supply installation & commissioningletters made of 18 gauge thick S.S.316 material laser cut outwith 75mm x 18 gauge thick side patti brazing for box type 3D Letters with backside S.S.Scrue brazing for fitting arrangment , front side attached 3mm thick040 acrylic laser cutout letters with male female fitting.all letter polish & rose colour PU coated as per your requirment.Letter bottam side attached 5mm S.S. laser cut PU coated plate for fitting arrangment.All letter inside samsung moduler LED Light for glow.All inculisive of Transpot Labour mechanical cutting Drillding , Making holes etc completed 49 Parking Logo : Prototyping supply installation & commissioning logo & letters made of 18 gauge thick S.S.316 material laser cut outwith 40mm x 18 gauge thick side patti brazing for box type 3D Letters with backside S.S.Scrue brazing for fitting arrangment .& Logo fitted on 30Ø S.S. Base plate with PU coating Colour as per artwork.All inculisive of Transpot Labour mechanical cutting Drillding , Making holes etc completed.Size: 36Ø 50 Letter in English : Prototyping supply installation & commissioning logo & letters made of 18 gauge thick S.S.316 material laser cut outwith 40mm x 18 gauge thick side patti brazing for box type 3D Letters with backside S.S.Scrue brazing for fitting arrangment .& Logo fitted on 30Ø S.S. Base plate with PU coating Colour as per artwork.All inculisive of Transpot Labour mechanical cutting Drillding , Making holes etc completed. Letter Size: 4.4 51 Letter in Marathi : Prototyping supply installation & commissioning logo & letters made of 18 gauge thick S.S.316 material laser cut outwith 40mm x 18 gauge thick side patti brazing for box type 3D Letters with backside S.S.Scrue brazing for fitting arrangment .& Logo fitted on 30Ø S.S. Base plate with PU coating Colour as per artwork.All inculisive of Transpot Labour mechanical cutting Drillding , Making holes etc completed. Letter Size: 6.25 52 Entry Gate Logo: Prototyping supply installation & commissioning logo & letters made of 18 gauge thick S.S.316 material laser cut outwith 40mm x 18 gauge thick side patti brazing for box type 3D Letters with backside S.S.Scrue brazing for fitting arrangment .& Logo fitted on 30Ø S.S. Base plate with PU coating Colour as per artwork.All inculisive of Transpot Labour mechanical cutting Drillding , Making holes etc completed. Size: 60Ø 53 Letter in Marathi : Prototyping supply installation & commissioning logo & letters made of 18 gauge thick S.S.316 material laser cut outwith 40mm x 18 gauge thick side patti brazing for box type 3D Letters with backside S.S.Scrue brazing for fitting arrangment .& Logo fitted on 30Ø S.S. Base plate with PU coating Colour as per artwork.All inculisive of Transpot Labour mechanical cutting Drillding , Making holes etc completed. Letter Size : 7.8 54 Letter in English : Prototyping supply installation & commissioning logo & letters made of 18 gauge thick S.S.316 material laser cut outwith 40mm x 18 gauge thick side patti brazing for box type 3D Letters with backside S.S.Scrue brazing for fitting arrangment .& Logo fitted on 30Ø S.S. Base plate with PU coating Colour as per artwork.All inculisive of Transpot Labour mechanical cutting Drillding , Making holes etc completed. Letter Size : 7.6 55 Parabolic Signage : Design, Manufacture,display,Installation of hanging type LED Illuminited sign/Direction board in Parabolic & Eliptical (half ,semi & full) shape.Aluminium Alloy (6063-T6) extruded Anodised profile use for outer & nylon bracket for internal structure holding & heatsinks fitting. The display sheet shall be of unbreakable 040 translucent polycarbonate sheet of 2mm/3mm thickness. The text/ Graphics matter visibility shall not be less than 160˚. The approved colour text and graphics shall be printed/router cut on monomeric calendered vinyl of 70μm thickness and shall be firmly pasted on display sheets.Provision for 24 x 24mm aluminium profile attachment for bottam hanging & top side Tie arrangment. .The signage shall have the integal mounting arrangments with strudy structural frame & ACP Cladding on the backside of signage to avoid rusting and entry of dust.The LED Board shall have25x 26mmheat sinks with multiangle attachment for LED & for nylon bracket. Uniform illumination with 4-8W/Sq.ft and with brightness more than ambient light. Suitable size end cap of 1.5mm thick S.S 304 should be provided. 56 Supply, Installation, Testing & Commissioning of NVR 32 CH with 80TB Storage 57 Supply, Installation, Testing & Commissioning of 49 LED Professional Monitor 58 Supply, Installation, Testing & Commissioning of4K HDMI Cable 10 Meter length 59 Supply, Installation, Testing & Commissioning of 9 U Rack 60 Providing & fixing Cat 6 IO camera & rack side 61 Providing & fixing 24 port jack panel unloaded for outdoor rack ( Make-D-Link) 62 Providing & fixing SFP Transceivers oudoor switch & building switch 63 Providing & fixing 1000Base-T Copper SFP Transceiver (PC & NVR) 64 LIU Loaded 65 Supply, Installation, Testing & Commissioning of 8 Port PoE Switchwith 2 SFP Ports (Industrial Grade) 66 Providing & Fixing 6 Core MM FIBER Cable 67 Supply, Installation, Testing & Commissioning of Armoured CAT-6 Cable 68 Supply, Installation, Testing & Commissioning of Power Cable 3 C x 2.5 Sq. mm Armoured 69 Supply, Installation, Testing & Commissioning of40mm HDPE pipe 70 Supply, Installation, Testing & Commissioning of Security Signage
14.99 Lakhs
