Sales : +91-777 804 8217
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 29-04-2025 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 06-05-2025 |
| Sl. No. | Item Description |
| 1 | Demolition of concrete (reinforced) Roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work all as specified |
| 2 | Dismantling of brick tiles or terracing tiles single layer on roof & disposal of retrieved material upto a distance n.exc 100m where directed, all as specified. |
| 3 | Demolition of mud in roof, any thickness including plastering and leaping (where full thickness removed or only a part there of disposal off rubbish upto a distance n.exc 100m, where directed all as specified |
| 4 | M&L forReinforced cement concrete M-30 (design mix) (using 20mm graded crushed stone aggregates) as in foundation including rafts, footings, foundations beams; plinth beams, bases for column etc; basement slabs, under-reamed piles and mass concrete complete all as specified and directed |
| 5 | M&L forReinforced cement concrete M-25 (design mix) (using 20mm graded crushed stone aggregates) as incolumn, pillars,piers, posts and struts complete all as specified and directed |
| 6 | M&L for RCC M-30 (20mm graded aggregate) in Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified |
| 7 | M&L for RCC M-30 in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified |
| 8 | M&L for use and waste of formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits of foundation and plinth beam and similar work vertical or to batter complete all as specified and directed |
| 9 | Form work tosides and soffits of floor or roof beam, beam, hauchings, girders, bressummers, lintels, cantilevers, shelves incl supports overhangs etc also splays between floors and beams, flat, rough finished surfaces of concrete complete all as specified and directed |
| 10 | Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and directed |
| 11 | Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n.exc 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10cm but n.exc 20cm wide complete all as specified and directed |
| 12 | S&F MS TMT Bars of 10 mm dia and over, cut to length, bent to shape requiredincluding cranking, bindingspirally for hooping for columns hooking ends and bindingwithand including MS wire (annealed) not less than 0.9 mm dia or securining with clip all as specified |
| 13 | S&F MS TMT Bars of 5 mm dia and overup to 10 mm diain stirrups, spacers and binders, cut to length bent to shape requiredincluding cranking, bindingspirally for hooping for columns hooking ends and bindingwithand including MS wire annealed not less than 0.9 mm dia or securining with clipall as specified |
| 14 | M&L for welding in repairs n.exc 2.5 cm in length on steel surfaces of n.exc 6mm thickness of metal complete all as specified and directed by Engineer-in-Charge |
| 15 | M&L for Chipping of Plaster/Concrete upto cover: Chipping of plaster/concrete upto cover only for making better bonding in between old and new concrete including tapering all edges upto 50mm thickness complete all as specified and directed |
| 16 | Supply and apply of rust remover to remove rust from existing reinforcement of any dia as per manufacturers specifications and directed, Product: Sika/ Dr Fixit/ Fosroc |
| 17 | M&L for applying a coat of epoxy bonding agent as per manufacturers specifications complete all as specified and directed Make: Dr Fixit URP , Fosroc Nitobond, Sikka Hibond |
| 18 | M&L fora micro concrete mixed and poured as per manufacturer specifications of thickness 40-50mm including necessary formwork as required and directed by Engr-in-Charge, Product: SIKA, Fosroc, Dr Fixit |
| 19 | Demolition of Brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed |
| 20 | M&L for brick work with sub class B bricks straight or curved on plan exceeding 6 mtr mean radius in cm 1:6 etc. complete all as specified and directed by Engineer-in-Charge |
| 21 | All as per Srl item No 20.00 here-in-before but except bricks |
| 22 | Taking down of chowkats or frames n.exc 1.5 Sqm each with shutters (without taking of shutters from the frames) complete all as specified. |
| 23 | Taking down of chowkats or frames exc 1.5 Sqm but n.exc 4 sqm each with shutters (without taking of shutters from the frames) complete all as specified |
| 24 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/ Chowkhat of size 65 x 125 mm comprising of virgin PVC polymer, calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. |
| 25 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 85 mm comprising of virgin PVC polymer, calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. |
| 26 | S&F2nd class HW factory made Plain, framed, panelled shutters 35 mm thick (two panels), with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS:1003 (Part I) Kiln seasoned and chemically pressure treated etc complete all as specified |
| 27 | S&F 2nd class hardwood factory made glazed skeleton shutters 35 mm thick open rebated and prepared to receive gauge etc but divided into squares, with plain chamfered or rounded, metered and riveted sash bars any numbers complete all as specified and directed |
| 28 | S&F Factory Made Solid PVC Moulded Door Shutter, with particle board core, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm 3D wood grain Moulded PVC Sheet Polyurethane painted on the front face & 2mm Plain colour PVC Sheet on back face, supplying & fixing in frame at site as per specification & drawing all as specified and directed |
| 29 | S&F anodised Aluminium frame for doors, window, ventilatorswith one or more rebates including joining cleat for fixing etc complete with powder coating on Aluminium minimum thickness of powder coating 50 micron as per the specification the top and bottom horizontal members and vertical members adjacent walls shall be fixed with floor, ceiling walls and cills where required and fixing with the help of rawal plug and screw or with fixing clip or with expansion hold plate fasteners . Aluminium section shall be smooth, rust free, straight mitred and jointed mechanically where ever required all complete as per the direction of Engineer-in-Charge |
| 30 | S&F anodised Aluminium window(glazed and gauzed both),side hung type without sash bars, aluminium section weighing 0.55 Kg/m including necessary joining cleats, glazing, clips, rubber packing, anodised aluminium snap beading screws, aluminium fitting such as peg stays 150mm long (01 No), hinges type B-21 100mm long (02 Nos) suitable handle (01 No)with powder coating of any colour (thickness of powder coating not less than 50micron) etc complete all as specified and directed.Note: Only Glass and wiremesh will be measured and paid separately |
| 31 | S&F Anodised aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading screws etc. complete all as specified |
| 32 | S&F Stainless Steel handles, cast type anodised 150 mm long complete all as specified and directed. |
| 33 | S&F 100 mm long stainless steel butt hinges,medium weight, cold rolled, and fixed complete all as specified and directed by Engr-in-Charge |
| 34 | S&F 250 mm long stainless steel sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified. |
| 35 | S&F stainless steel barrel tower bolts, 200 mm long of extruded section complete all as specified and directed. |
| 36 | S&F stainless steel barrel tower bolts, 150 mm long of extruded section complete all as specified and directed. |
| 37 | S&F 300 mm size mild steel ordinary rat rail rod pattern springs including roller and roller plate complete. |
| 38 | S&F 150mm length floor door stopper of stainless steel body and tongue, anodised with hard drawn steel spring fixed in floor all as specified |
| 39 | S&F Stainlesssteel wire cloth 0.40 mm nominal dia of wire and average width of aperture 1.40mm and fixed etc., complete all as specified |
| 40 | M&L for sheet glass ordinary quality 4 mm thick and glazing with oil putty in square n.exc 0.50 Sqm in each panes fixed to steel, metal or wooden window frames complete all as specified |
| 41 | S&F in repair aluminium (Die cast) body door closer hydraulically regulated, designation No. 3 universal type, suitable for door shutters of 851 to 1000mm in width and weight between 61 to 80kg and fixed complete all as specified and directed by Engineer-in-Charge. |
| 42 | S&F Framed work such as grills, gratings cooler stand, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete all as specified |
| 43 | M&L for preparing wood or wood based surfaces of any description over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed |
| 44 | M&L for preparation of old painted surfaces includingas knotting, stopping, Burning off or removing, scraping etc, and then applying one coat of synthetic enamel paint (ordinary tint) on wooden surfaces over 10cm width or girthcomplete all as specified and directed by Engineer-in-Charge |
| 45 | M&L for preparation of new or previously untreated steel surface any description over 10cm width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer all as specified. |
| 46 | M&L for preparation of old painted surfaces includingas knotting, stopping, Burning off or removing, scraping etc, and then applying one coat of synthetic enamel paint (ordinary tint) on steel surfaces over 10cm width or girthcomplete all as specified and directed by Engineer-in-Charge |
| 47 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified |
| 48 | M&L for Machine cut kota stone slab in flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing incl 15mm thick screed bed or bedding layer CM 1:4 for laying finishes complete all as specified |
| 49 | M&L for Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed |
| 50 | M&L for Premium quality non-skid ceramic tile of size 400mm x 400mm, thickness of 7 to 8mm pasted with tile adhesive and epoxy grouted with same make as of tiles water absorption of the tile should be between 3% to 6% Make Glosstra series of Samany or equivalent in Johnson/ Kajaria complete all as specified and directed |
| 51 | All as per Srl item No 50.00 here-in-before but as in vertical surfaces such as skirting, dados & risers to steps etc |
| 52 | M&L for Premium quality glazed ceramic tile of size 600mm x 300mm thickness 7mm, water absorption between 10% to 20% pasted with tile adhesive and epoxy grouted with same make as of tile Make Glosstra series of Samany or equivalent in Johnson/Kajaria complete all as specified and directed |
| 53 | M&L for stone slabsof any description or thickness in floors, apron etc laid bedded and pointed in any mortar including M&L Baroda Green Marble work 12 to 15 mm thick (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of green marble all as specified |
| 54 | M&L for rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified |
| 55 | M&L for Premium quality double charge vitrified tiles having water absorption less than 0.08% of size 600mmx600mm, thickness 8 to 9mm pasted with tile adhesive and epoxy grouted with same make as of tile (Make : Ultra Charge of Somany or equivalent in Johnson/ Kajaria complete all as specified and directed |
| 56 | All as per Srl item No 55.00 here-in-before but as in vertical surfaces such as skirting, dados & risers to steps etc |
| 57 | Taking down cement plasterfrom brick walls/ ceiling or concrete of any description, racking out joints hacking for key scrubbing down with water etc complete all as specified |
| 58 | M&L for Rendering 15 mm thick in cement plaster 1:6 on other than fair faces of brick work or concrete surfaces finished even and smooth without using extra cementall as specified and directed by Engr-in-Charge |
| 59 | M&L for Rendering 10 mm thick in cement plaster 1:4on fair face of brickworkor stone masonry surfaces or on one side of lathing, finished even and smooth without using extra cement complete all as specified and directed by Engr-in-Charge |
| 60 | M&L for Rendering 10 mm thick in cement plaster 1:3 on ceiling finished even and smooth without using extra cement complete all as specified |
| 61 | M&L for preparation of newly plastered or unplastered surfaces of wall and applying two coat of distemper oil emulsion white/tinted over 1mm coat of wall care putty finished even and smooth surface by hand roller complete all as specified and directed by Engr-in-Charge |
| 62 | M&L for complete removal of existing treatment ofold decorated surfaces of wall by mechanical sander/ brooming down and scrapping down smoke soot, moulds, moss and efflorescent salts and treating oil and greasy spots and filling in depressions to make smooth surface and applying two coat of distemper oil emulsion white/tinted using hand roller complete over a coat of 1 mm wall care putty all as specified |
| 63 | M&L for preparation of old decorated surface of wall and applying one coat of white wash complete all as specified and directed by Engr-in-Charge |
| 64 | M&L for preparation of newly plastered or unplastered surfaces of wall and applying two coat of Acrylic Smooth exterior paint of required shed including priming coat of exterior primer complete all as specified and directed by Engr-in-Charge |
| 65 | M&L for Preparation of new ceiling surfaces plastered or unplastered and applying two coat of white washcomplete all as specified and directed by Engr-in-Charge |
| 66 | M&L for preparation of old decorated surface of wall and applying two coat of Acrylic Smooth exterior paint of required shed including priming coat of exterior primer complete all as specified and directed by Engr-in-Charge |
| 67 | S&F Providing precast cement concrete louvres and jallies, 25mm thick type B0 1:2:4 set in CM 1:6 complete all as specified |
| 68 | M&L for Rendering 10 mm thick in cement plaster 1:4 withWPC on roof, fair faces of brick work or concrete surfaces all as specified and directed by Engr-in-Charge. Note : WPC will be measured and paid separately |
| 69 | M&L for Roof Treatment in patches as specified below and as directed :(a) Apply 15mm thick screed/plaster in CM with 1:3 while the concrete is green with approved water proofing compound in proportion as recommended by manufacturer. (b) Surface Preparation . Cleaning the screed surface to make it laitance, dust and sludge free, removing any extended portion by grinding using suitable equipment and providing basic repair including filling of any cracks or pot holes with sika latex mortar modifier. (c) Joint Sealing and detailing . Providing and applying sika reemat premium at all detailing areas. (d) Epoxy Primer. Providing and applying Sikalastic-10 Primer EP, 2 part, and solvent free, low viscous epoxy based primer applied at consumption of 0.2 Kg/Sqm. The primer must have a compressive strength>60N/Sqmm and flexural trength >30NSqmm. (e) Waterproofing and cool roof coating. Providing and applying Sikalastic-590 IN, single component, flexible, liquid applied UV and weather resistant, polyuethane waterproofing membrane with high reflective orioerties. The waterproofing membrane must have following properties:-(i) Tensile strength > 1.5N/Sqmm according to ASTM D412(ii) Elongation at break>250 according to ASTM D412(iii) The liquid membrane must be resistant to growth of algae and fungi and have high SRI of 106 with reflectivity 84% according to green bldg reqmts. (iv) The waterproofing membrane must be applied in three coat of SIKALASTIC-590 IN applied at consumption of 0.5Kg/Sqm each coat.(v) The roofing system should be compatible with bitumen. Note :(i) Make of all the product for above treatment - SIKA or TECHNO commercial equivalent make approved by GE in writing in make mention in Appx \"B\" or from E-in-C approved list.(ii) All auxiliary and accessories involved during application should be supplied by single manufacturer as a part of System.(iii) The application must be done with necessary detailing as per manufacturer method statement.(iv) The manufacturer must be an ISO 9001 and 14001 certified and valid certificate must be produced as prove. |
| 70 | Supply only Liquid water proofing compound all as directed |
| 71 | M&L for sand filling under floors or in foundations including watering and consolidation complete all as specified and directed |
| 72 | M&L for Hard core of broken brick aggregate gauge not exc. 63mm deposited spread and levelled in layers not exc. 15cm thick watered and rammed to a true surface complete all as specified |
| 73 | M&L for machine pressedprecast concrete interlocking paver block with grey cement and pigment (coloured tiles) of any shape and size confirming to IS 15658-2006 of 80mm thickness, M-40 Grade complete all as directed. |
| 74 | M&L for Providing factory made precast cement concrete solid blocktype B1, 1:2:4 (20mm graded aggregate) as in kerb stone of any size/thickness setting in cement mortar 1:4 for path edgings etc, embedded in position including all necessary excavation, tamping ground around blocks and removal of rubbish/surplus soil etc. complete all as directed |
| 75 | M&L for preparation of new concrete surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint including primer paints complete all as specified and directed. |
| 76 | S&F Solid PVC wall lining consisting of 5mm thick wood grain printed PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawings all as specified and directed by Engineer-in-ChargeNote:- If any minor electric fittings and fixtures disturbed there will be match and fixed as existing. |
| 77 | S&F 5m thick PVC Sheet fillet of width 35mm for wall panelling inclusive of fixing on to wall to make PVC frame as per specification and drawing all as specified and directed by Engineer-in-Charge |
| 78 | Taking up or down GI tubing 15 mm bore pipe including cleaning for re-fixing or removal to store complete all as specified |
| 79 | Taking up or down GI tubing 20 mm bore pipe including cleaning for re-fixing or removal to store complete all as specified |
| 80 | Taking up or down GI tubing 25 mm bore pipe including cleaning for re-fixing or removal to store complete all as specified |
| 81 | S&F GI tubing 15 mm bore medium grade galvanise with all fitting and fixed to walls & ceilings or laid in floors, bore of pipe 15 mm complete all as specified. |
| 82 | S&F GI tubing 20 mm bore medium grade galvanise with all fitting and fixed to walls & ceilings or laid in floors, bore of pipe 20 mm complete all as specified. |
| 83 | S&F GI tubing 25 mm bore medium grade galvanise with all fitting and fixed to walls & ceilings or laid in floors, bore of pipe 20 mm complete all as specified. |
| 84 | All as per Srl item No. 81.00 here-in-before but refixing 15 mm dia ,old steel tubing and connections in new or old position (wall, ceiling and floors etc) |
| 85 | All as per Srl item No. 82.00 here-in-before but refixing 20 mm dia ,old steel tubing and connections in new or old position (wall, ceiling and floors etc) |
| 86 | All as per Srl item No. 83.00 here-in-before but refixing 25 mm dia ,old steel tubing and connections in new or old position (wall, ceiling and floors etc) |
| 87 | M&L for cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting exceeding 20cm girth complete all as specified |
| 88 | S&F in repair Rotational moulded polythylene 500 capacity waterstorage tank (Cylindrical vertical with closed top) hoisted and fixed in position including 20mm ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed. & dismantling of old water tank complete all as specified |
| 89 | S&F in repairs 20mm gun metal globe or gate valve with iron sheet head, screwed both ends for iron pipe and fixed complete all as specified and directed. |
| 90 | S&F in repairs 25 mm gun metal globe or gate valve with iron sheet head, screwed both ends for iron pipe and fixed complete all as specified and directed. |
| 91 | S&F in repair 15 mm dia bore fancy type chromium plated long body bib taps cast copper alloy with on/off handle, screwed down, screwed for iron pipe, or for brass ferrule complete all as specified and as directed. |
| 92 | S&F Brass CPBasin mixer 15mm bore for mixing hot & cold water screwed down for iron pipe for Wash Hand Basin complete all as specified and directed. |
| 93 | S&F Brass CP Wall mixer 15mm bore for mixing hot & cold water screwed down for iron pipe complete all as specified and directed. |
| 94 | S&F in repair 15 mm bore chromium plated Angular stop valve of cast copper alloy screwed down high pressure with on/off handle screwed both ends for iron pipe or for unions and fixed all as specified and directed |
| 95 | S&F in repair 15 mm bore chromium plated stop valve of cast copper alloy with long shank and cup (concealed type) ends for iron pipe or for unions and fixed all as specified and directed |
| 96 | S&F PVC connection 15 mm size with PTMT nuts of length 600 mm of approved quality complete all as specified |
| 97 | S&F stainless steel plate racks of size 900mm x 600mm x 250mm and thickness of SS strip of 1mm fixed on wall etc complete all as specified. |
| 98 | S&F sinks Without Drainage Board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified |
| 99 | S&F in repair vitreous china counter wash basins, size 470x470mm white flat back to be fixed on granite/marble & RCC slabincluding cutting for and pinning in ends of brackets or erecting stand,including 32mm waste fittings, waste pipe, chromium plated with long screwed shanks & fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified. |
| 100 | S&F vitreous china wash basins, size 550x400mm white flat back including cutting for and pinning in ends of brackets or erecting standincluding 32mm waste fittings, chromium plated with long screwed shanks & fly-nuts, waste pipe, flange end bedded in red lead cement and other end fixed complete all as specified |
| 101 | S&F in repairs vitreous China squatting pan of Orrissa pattern of approved make of size 580mm X 440mm white with integral foot rests (excluding flushing cistern and flush pipe) including connection to trap and to flushing pipe incl lime concrete bedding and connection to anti syphonage pipe etc including making good to floor complete all as specified |
| 102 | M&L for 100 mm dia of long body CI \"P\" or \"S\" trap including jointing to waste pipe fixed in cement concrete 1:2:4 type B1 in repair complete all as specified |
| 103 | S&F in repairs PVC low level cistern of 10 ltrs capacity with top push button inclusive of brackets and PVC bend long type and connection to flush pipe of any size and pattern with inlet ball valve float and handle complete of approved make all as specified |
| 104 | S&F in repair brass chromium plated shower rose 125 mm of size with arm and with or without swivel joints to steel pipe or union complete all as specified and as directed |
| 105 | S&F in repairs vitreous china wash down water closet pan pedestal pattern white including connection pipe to union of flushing cistern, inlet and overflow pipes, connecting only to flushing cistern anti-syphonage pipe with PVC flush pipe of 32mm dia and including plastic seat with cover white in colour, bottom recessed with mild steel chromium plated hinging complete all as specified and directed by Engineer-in-Charge |
| 106 | S&F 600mm x 450mm of thickness 6mm bevelled edge mirror of selected quality glass fixed to wall with chromium plated brass screws and cup washers complete all as specified. |
| 107 | S&F in repair brass chromium plated tubular towel rail, 20 mm dia, D type, 60 cm long between flanges complete all as specified.. |
| 108 | S&F Towel Ring of stainless steel fixed with and including Chromium plated brass screws and wooden/plastic cleats complete all as specified and directed |
| 109 | S&F PTMT soap tray any type and fixed to plugs on wall with chromium plated brass screws complete all as specified and directed. |
| 110 | S&F Stainless steel fancy type peg set of six and fixed in position with steel screws complete all as specified and directed. |
| 111 | M&L for 25mm dia PVC coatedMS Pipe coloured curtain rod with brackets and knobs at both ends as per site requirement including taking down old existing curtain rods any description with accessories complete all as specified and directed.Note : The cost of brackets and knobs is deemed to be included in the quoted rate.Nothing extra shall be paid on this account. |
| 112 | Taking down rain water pipe and eaves gutters(any size and pattern) including all fittings heads shoes bends swan necks etc including cleaning or refixing or removal to store (measured overall as fixed along the centre line over fittings and accessories) complete all as specified |
| 113 | S&F 110 mm bore of pipe PVC (SWR) pipes single socket in any length with rubber ring joint fixed to walls with MS clamps fixed with same make solution complete all as specified and directed. |
| 114 | S&F 110 mm bore of pipe PVC (SWR) bends of any radius / shoefixed to PVC pipes complete all as specified and directed |
| 115 | Dismantling and disconnecting of existing CI soil waste/vent/PVC pipe 75 mmbore fixed to wall, laid in trenches incl all fittings & accessories complete all as specified |
| 116 | S&F75mm dia PVC pipes in any length with or without ears, fixed with same make solution but laid in trenches / floors complete all as specified |
| 117 | S&F 75 bore, PVC bends (any radius), diminishing pieces or tapers (large bore measured)as in repairs complete all as specified |
| 118 | M&L for 75mm dia of long body PVC Floor trap with grating including jointing to waste pipe fixed with same make solution in repair completeall as specified |
| 119 | S&F in repairs PVC cowls 100 mm complete all as specified and directed |
| 120 | S&F Salt-glazed stoneware gully traps 150x 150 mm , square or round mouthed, tvpe \"P complete all as specified |
| 121 | M&L for CP Toilet Paper Holder with flat recessed type stainless steel Complete all as specified and directed |
| 122 | S&F jet chromium plated (health faucet with 01 m PVC pipe) for 15mm bore with fittings, fixed as in repairs complete all as specified and directed. MAKE : PRAYAG Cat Part No BEA 40 or equivalent in NOVA |
| 123 | S&F in repairs CP brass jet spray with flexible pipe not less than 90 cm long fixed to EWC suitable for 15mm bore complete all as specified and directed at site |
| 124 | M&L for Mirror polishing only on marble/granite/Kota stone/stone work where ever required to give high gloss finish and applying white/colour cement for joints of kota stone complete all as specified and directed by Engr-in-Charge |
| 125 | Excavation in trenches in any type of soil not exceeding 1.5m deep and 1.5m wide, for foundation etc or manholes, piers, shafts, cables/poles foundation / stay assembly etc not exceeding 10 Sqm on plan and getting out complete all as specified and directed |
| 126 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25cmcomplete all as specified and directed |
| 127 | Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed |
| 128 | S&F 8mm thick PVC laminated gypsum board as in ceiling fixed with screws as per manufactures instructions, including anodized aluminium snap grid frame work for false ceiling of grid 605 x 605 hangers 3mm dia (upto 1200mm length) adjusting level fixed to roof slab by means of ceiling cleats made of GI flat 40 x 3mm size & length 60mm and expansion hold fasteners 12.5mm dia 40mm long complete all as specified & directed. |
| 129 | Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc.all as specified and directed by Engr-in-Charge. |
| 130 | Point wiring complete with ISI marked 1.5 sqmm single core PVC insulated unsheathed cable 1100V grade FRLS with multistranded copper conductor drawn through concealed/surface in wall/roof/ceiling surface and its accessories on the surface etc includingPVC rigid concealed conduit suitable size with all accessories such as bend, reducers, MS hooks, MS junction boxes, 2mm thick galvanised steel pressed sunken terminal boxes of suitable sizes for mounting of switches, sockets, fan regulator etc covered with 2.8 mm thick plastic laminate Hylem top cover sheet of required colour fixed with brass screws and cup washers painting terminal boxes inside and outside with one coat red oxide primer includingfixing and 1.5 sqmm copper conductor as earth continuity to connect common earth dolly completed for One light point/Fan point/Exhaust point controlled byone way switch all as specified and as directed |
| 131 | All as per Srl Item No. 130.00 here-in-before butOne three pin socket out let 5 amps on the same board with other switches |
| 132 | All as per Srl Item No. 130.00 here-in-before butOne 3 pin, 5A switch socket outlet point on independent board |
| 133 | All as per Srl Item No. 130.00 here-in-before but with 2.5 sqmm cable for 1No 16 amps socket outlet point on independent board including 2.5 sqmm PVC insulated unsheathed cable multistranded with copper conductor green in colour as earth continuity conductor. |
| 134 | S&F PVC Lamp holder suitable for LED 5 to 20 watt bulb complete all as specified and directed |
| 135 | S&F LED bulb 1x10 Watt lamp having luminous efficacy warranty 2 year all as per specification & directed |
| 136 | S&F LED tube light fitting 20W, (4 feet long) 230 V, surface and wall mounted LED batten with polycarbonate housing & integrated electronic driver and including connections up with copper conductor wire with suitable size as per specification and directed by Engineer-in-Charge |
| 137 | S&F LED tube light fitting 10W, (2 feet long) 230 V, surface and wall mounted LED batten with polycarbonate housing & integrated electronic driver and including connections up with copper conductor wire with suitable size as per specification and directed by Engineer-in-Charge |
| 138 | M&L for ceiling rose 3 terminal / PVC / polycarbonate isolated body complete all as specified |
| 139 | M&L for submain wiring with two single core PVC FRLSinsulatedcopper conductor 6 sqmm and same 6 sqmm for continuous earth wire drawn in to existing concealed PVC conduit and including making good disturbed surfaces of walls as necessary complete all as specified and directed by Engr-in-Charge. Note: Cost of earth wire including in sub main wiring |
| 140 | S&F Piano type switch single pole 1 way 5/6 amps 230 volt AC supply complete all as specified and directed . |
| 141 | S&F socket two in one 5/6 Pin, 5/6 Amps230 volt AC supply complete all as specified and directed . |
| 142 | S&FPiano type switch single pole 1 way 15/16 amps 230 volt AC supply complete all as specified and directed . |
| 143 | S&F socket two in one 5/6 Pin 15/16 Amps230 volt AC supply complete all as specified and directed by Engr-in-Charge. |
| 144 | Supply and fixing 240V, 10 KA \"B\" curve miniature circuit breaker (MCB) of single poles and current carrying capacity 5 to 32 AMP, in the MCB DB Complete with connection testing and commissioning complete all as specified and directed . |
| 145 | S&F sheet metal enclosure for DB\"s SPN 230 volts 12 waydouble doorincluding taking down unserviceable old DB any type including MCB etc and including making good disturbed surfaces of walls as necessary complete all as specified and directed |
| 146 | S&F amp rating 240V, 10KA \"B\" curve miniature circuit breaker (MCB) of SPN 40 to 63 AMP and current carrying capacity in the MCB DB complete with connection testing and commissioning complete all as specified and directed. |
| 147 | S&F in replacement energy efficient LED Security light fitting of 25W pressure die cast aluminium housing/body, heat resistant clear toughened glass,better optics for uniform distribution street/Roadway luminaire, with driver, including electric connection, complete fitting with all accessories and following specifications, including taking down old Unserviceable light fitting any type complete all as specified and directed by Engineer-in-Charge :-(a) Lumen system efficacy of luminaire should be minimum 100 Lumen per watt.(b) Input Voltage range : 140 to 270 volts (c) Temp operating range : Minus 10°C to Plus 50°C (d) Power factor : Minimum 0.95(e) THD : Max10%.(f) IP rating : IP66. (g) IK rating:Minimum IK07 (h) Built in potted LED Driver of the same make as of the luminaire.(j) LED driver should be complete with all protections vizopen/short circuit protection, over voltage protection, all as per standard design of manufacturer.(k) Surge protection 10 kV (inbuilt + extended) (l) CCT : 5700 K.(m) CRI: Morethan 80 (n) Lens - High Efficiency wide angle lens.(o) BIS Approved fixtures and driver (p) Rated life time : 50000 burning hrs (Average 10 to 12 hrs daily) |
| 148 | S&F LED light fitting 1X10W bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size. complete with all accessoriesincl taking down unserviceable light any type as per specification & directed by Engr-in-Charge |
| 149 | S&F exhaust fan steel body, AC single Phase 230V, 50 Cycle per second, size 300 mm sweep with blades and frame including self closing GI louvers off mode protection against birds etc mounted in suitable opening arrangement and connecting up and including three core PVC Insulated PVC Sheathed copper conductor flexible cable1.0 Sqmm drawn in flexible PVC conduit and hanging on wall with 4 Nos steel fastners 10mm dia 100mm long including hole in wall and making good the disturbed surface complete all as specified and as directed by Engineer-in-charge. |
| 150 | S&F ceiling fans complete with blades, down rods, Remote and accessories, 230 V, 1200 mm sweep. Min air delivery 245 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as directed. |
| 151 | M&L for submain wiring with two single core PVC FRLSinsulatedstranded copper conductor cable of size 4 sqmm and same 4 sqmm for continuous earth wire drawn in to concealed PVC conduit and making good to disturbed area complete all as specified and directed by Engr-in-Charge. Note: Cost of PVC conduit, conduit accessories and earth wire including in sub main wiringall complete as specified and directed by Engr-in-Charge. |
| 152 | S&F DBOXx SRCD (Socket Residual Current Device) is ready plug & play all -in-one device that provides protection to humans from electric shock due to direct or indirect contact as well as provides protection from overload and short circuit faults Single polecomplete with one SPN MCB 20 Amps, 240 V, AC supply, and plug top all type as specified and directed. |
| 153 | Supply and laying Rigid non-metallic PVC conduit size 25 mm exclusive of boxes (junction/ terminal) but inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc. with all fitting including taking down old Unserviceable pipe any type complete all as specified. |
| 154 | Supplying, fixingand commissioning of electric water heater (Geyser) storage type ABS body of capacity 25 litre, BEE approved 5 Star rating, 230 V , single Phase, AC supply, inner tank made out of heavy duty stainless steel sheet (Designed with single weld line, factory tested with hydraulic pressure as per latest IS code) with glass lined coating complete with all accessories such as safety valve, thermostat, NRV, connection piece PVC connection for Hot and cold water, three core PVC insulated PVC Sheathed copper conductor flexible cable including15 Amp plug suitable for existing socket and fixing material, 04 no Nut bolt grouting in wall in PCC (1:2:4) using 12.5mm graded stone aggregate for hanging the geyser and making good the disturbed surface complete all as specified and directed by Engr-in-Charge |
| 155 | S&F in replacement (concealed flush to wall) factory made DB (made out of CRCA sheet not less than 1.2mm thick, fitted with DIN channel neutral link and 250 Amp rated bus bar) VTPN, 4 Way, suitable for mounting MCCB/MCB, conforming to IS-13032, DB shall be semi glossy finished with epoxy polyster based powder paint sprayed and backed at high temperature between powder paint process to ensure smooth finish and protection against corrosion atmosphere. The DB shall be double door type with hinged door with locking arrangement, the DBs shall be same make as MCBs, DB shall be provided with level marking indicating the incoming and outgoing circuits on always as specified. The DBs shall be of IP-42 protection class, including taking down unserviceable old DB any type including MCB etc and including making good disturbed surfaces of walls as necessary complete all as specified and directed by Engineer-in-Charge.Note :- MCCB/MCB shall be measured and paid separately under appropriate item of BOQ |
| 156 | S&F MCCB 4 pole, 415 V. adjustable type, 100 Amps with breaking capacity 16 KAcomplete all as specified and directed by Engr-in-Charge. |
| 157 | M&L for earthing complete with galvanized steel earth plate electrode 60cm x 60cm x 6mm thick buried directly in ground vertically to a depth not less than 2.25 Mtr below ground level with top edge of earth plate at a depth not less than 1.5 Mtr below ground level, earth plate surrounded by 15cm thick packed layer of charcoal dust and common salt, connected to galvanized iron earth lead wire 4mm dia by means of bolts, nuts and washers of galvanized iron or steel and thimbles upto equipment and other end of the earth wire connected to earthing test point and protected by galvanized iron pipe light grade 15mm dia upto earthing test point / equipment fixed with 2 Nos. of mold steel clamps made out of 25mm x 3mm flat iron and preforated water pipe 20mm dia galvanized iron pipe heavy grade 2.25 Mtr long and top with socket and plug and bottom connected to earth plate by silt and two bolts / nuts / washers complete with funnel and wire mesh, PCC chamber in cement concrete (1:3:6) type C-1 and cast iron cover with frame all as shown on electrical plate No. 3 of MES Schedule Part - I of SSR-2009 including taking down old Unserviceable earthing any type complete all as specified and directed by Engineer-in-Charge.Note : (i) Outer edge of earth pit will be 1 Mtr away from the outer edge of PCC Chamber.(ii) Galvanized iron earth wire 4mm dia upto earthing test point / equipment is included in this item.(iii) Water pipe shall be provided in slanting position |
| 158 | Supply and spread dry fine aggregate sand in trenches for cable cushioning all as specified onboth top and bottom of cable including ramming all as specified and directed by Engr-in-Charge.Note :For the purpose of payment the punned thickness only measured |
| 159 | Supplying and laying factory made un-reinforced precast concrete cable cover, class EHV, type 1 with peak, size 250mmx 150mm x 40mm standard size laid in trenches of across the cable protection all as specified and directed by Engr-in-Charge. |
| 160 | Supply and Laying XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 16 Sqmm 4 core in trenches/floors/wall and under road including connecting with suitable aluminium lugs and including taking up defective unserviceable cable of the any sizes all as specified and directed by Engr-in-Charge. Note: Earth work, Sand cushioning, GI pipe and cable cover for protection to be measured and paid separately |
| 161 | Supply and laying steel water tubing, 25 mm dia ISI Marked, \"“Medium grade\" galvanised, including tube fittings Viz Tees Socket bends elbows, union nipple etc screwed and socketed joint laid in trenches/under road including taking down old Unserviceable pipe any type with all fitting complete all as specified |
| 162 | M&L for Gun-metal, globe or gate valves, 25 mm bore of pipe with iron wheel head, screwed both ends for iron pipe and fixedincluding taking down old Unserviceable gate valve any type complete all as specified. |
| 163 | Supply and laying steel water tubing, 40 mm dia ISI Marked, \"“light grade\" galvanised, including tube fittings Viz Tees Socket bends elbows, union nipple etc screwed and socketed joint laid in trenches/under road with all fitting including taking down old Unserviceable pipe any type complete all as specifiedNote :-A Sum of Rs. 2,63,651.00 will be deducted on account of credit for dismantling/ demolished/ taking down material. Please refer detail on srl page No. 42 (Schedule of credit) of Tender Documents. |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
