Providing & Fixing Internal Electrification inVet.Dispensary G-1At-Umarad ,Tal-Karmala,Dist- Solapur.- 1 Supplying anderecting PVC trunking (PVCcasing-n-capping)ofsize25 mm with accessories on wall/ceiling as per specification No: WG-MA/CON.(1-2-7) 2 Supplying and erecting mains with 2x1.5 sq.mm FRLSHcopperPVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WG-MA/BW (1-3-1) 3 Supplying and erecting mains with 1x1.5 sq.mm FRLSHcopperPVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WG-MA/BW (1-3-1) 4 Supplying and erecting mains with 2x2.5 sq.mm FRLSHcopperPVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WG-MA/BW (1-3-2) 5 Supplying and erecting mains with 1x2.5 sq.mm FRLSHcopperPVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WG-MA/BW (1-3-2) 6 Supplying and erecting mains with 2x4 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WG-MA/BW(1-3-3) 7 Supplying and erecting mains with 1x4 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WG-MA/BW(1-3-3) 8 Supplying and erecting modular type switch 6A / 10A ISI mark approved make duly erected on provided plate and box with wiring connections complete.(1-6-1)) 9 Supplying and erecting modular type 3 pin 6A multi socket with safety shutter ISI mark approved make duly erected on provided plate and box with wiring connections complete.(1-6-10) 10 Supplying and erecting PVC Surface modular switch box with double mounting plate for 12 module duly erected in an approved manner.(1-6-32) 11 Supplying and erecting modular type 3 pin 6 / 16A multi socket with safety shutter ISI mark approved make duly erected on provided plate and box with wiring connections Complete(1-6-11)] 12 Supplying and erecting modular type switch 16A ISI mark approved make duly erected on provided plate and box withwiring connections complete.(1-6-2) 13 Supplying and erecting PVC Surface modular switch box with double mounting plate for 3 module duly erected in an approved manner.(1-6-28) 14 Wiring for plug on board withSwitch socket surface/concealed type, copper wiring and earthing and with modular accessories as per specification No: WG-PW/CW(1-7- 26) 15 Point wiring for light/bell/exhaust fan in PVC trunking (casing-capping) with 1.5 sq.mm (2+1E) FRLSH grade copper wire, modular type switch, earthingand required accessories as per specification No: WG-PW/SW(1-7-19) 16 Point wiring for ceiling fan in PVC trunking (casing-capping) with 1.5 sq.mm (2+1E) FRLSH grade copper wire, modular type switch, earthingand required accessories as per specification No: WG-PW/SW(1-7-20) Fan Point 17 Supplying & erecting ready to use retrofit T8 LED 18-20W tube light with heat sink, integrated HF electronic driver complete & compatible to T8 (36W) / T12 (40W) luminaire by disconnecting starter & ballast if necessary.(2-8-14) 18 Supplyinganderectingluminous / modular type call bell indicator with plasticbody, heavy duty coil and indicatorlamp working on 230V A.C. supplywith resetting arrangement complete erectedondouble wooden/ sunmica board.(2-3-14) 19 Supplying & erecting3W, 230V integral type LED Lampsuitable for B-22/E-27 base.(2-8-9) 20 Supplying & erecting 5W-8W, 230V integral type LED Lamp suitable for B-22/E-27 base.(2-8-10) 21 Supplying and erecting Five Star Rated Energy Saving Ceiling Fan 230 V A.C. 50 cycles 1200 mm complete erected in position as per specification no. FG-FN/CF(2-10-21) 22 Supplying & fixing Anchor type fastener Fan hook, with 2 Nos of 10 mm dia x 75 mm long with necessary materials for Ceiling Fan.(2-11-2) 23 Supplying and erecting modular type electronic step regulator for fan two module ISI mark approved make duly erected on provided plate and box with wiring connections complete.(1-6-23) 24 Supplying and erecting midget type 3.0 litres instant type water heater ofrustproof & shockproof ABS plastic body, high grade SS inner tank & 3kW heating element with corrosion & hard water protection, with minimum 3safety protections (i.e. thermostat & thermal cut-out, function valve)complete with 6.5 bar pressure withstanding capacity 230/250V, 50Hz, A.C.supply with inlet and outlet, with 3 core PVC flexible copper wire leads duly tested and marking sr. no. and date of erection complete..(3-1-6) 25 Providing fiber reinforced PVC flexible pipe upto 1m length with brass locking nuts and washers and clips at both ends suitable for hot water and cold water both (1 set of 2 nos.) complete. (3-1-11) 26 Supplying, installing, testing and commissioning of single phase, 230V, 50 Hz, 700VA digital pure sine wave inverterwith backup time of ........ hrs. based on Insulated Gate Bipolar Transistor (IGBT) technologycompleteas per specification no. AP-INV )(3-6-1) 27 Supplying and erecting 12V/100Ah tubular battery with battery terminal wire, duly charged with 36 months warranty complete.(3-8-2) 28 Supplying, erecting & marking DPMCB 6 A to 32 A B- series (for lighting) in provided distribution board as per specification no. SW-SWR/MCB(5-3-7) 29 Supplying, erecting & marking SPMCB 6A to 32A, C-serieswith rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB (5-3-2) 30 Supplying, erecting & marking SPMCB 6A to 32A, B-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB(5-3-3) 31 Supplyingand erecting single pole and neutral distributionboard (SPNDB), with 2 ways for incoming and 6 ways (6 poles) for outgoing SP MCBs, with door, 1.2mm thickness surface / flush mounted, IP 43 Protection on iron / GI frame as per specification no. SW-SWR/MCBDB(5-4-8) 32 Supplying, installing, testing and commissioning of 3 kWp ON-GRID Solar PV System / Plant consisting solar PV poly crystalline panel (335 Wp X 09 Nos.) and Solar ON-GRID Inverter of similar capacity (THD<3%) with interconnectingwires / cables up to solar ON GRIDinverter, proper base plate, canopy box to house Inverter and necessary accessories i.e. ACDB/ DCDB , MCB etc. wiring up to solar Inverter in casing and capping,display board, sign board, two distinct earthing, lightning arrester, liaisoning charges, remote monitoring system with maintaining card / chip for 5 years including net charges for RMS system, complete up to net meter installation and export to the grid with 5 year ON-SITE warranty and fully comprehensive maintenance contract as per specification no. ESD-RT-ONG(4-5-1) 33 Supplying and erecting integrated LED street light fitting18 to 22W IP65 & IK08 class having single piece pressure die-cast aluminium housing,having system lumens output of Min. 1800 Lumens, min. efficacy of 100 lumen/W, CRI>70, CCT upto 6500K,THD<10%, p.f. >0.95, operating range of140-270V, inbuilt surge protection of 10 kV, Life class of 50,000 Hrs. at L70B50, including driver complete with 3 Years warranty as per specification NoFG-ODF/FLS2.2..(2-4-1) 34 Supplying and erecting Street light bracket for erection of side entry fitting on pole with 25 mm. dia. ‘B’ class G.I. pipe of required length complete as per specification no. FG-BKT/SLBC(2-7-10) 35 Providing earthing with galvanized iron earth plate size 60 x 60 x 0.6 cm complete with all materials, testing & recording the results asper specification no. EA-EP (9-1-1) 36 Supplying and erecting mains with WP 2 x 4 sq. mm. 1100 V grade aluminium PVCinsulatedandPVC sheathed wires on G.I. bearer wire No. 8 SWG complete erectedwith required size ofporcelainreelinsulators and 16 SWG G.I. binding wire.(1-4-2). 37 MSEDCL Charges 38 GST Added 18 %
