Tender For Tomato Processing Shed With Storage 951.38 Sqm - Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area & stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and struttingincluding all leads and lift etc.complete. 2 Excavation for foundation in hard murum including removing the excavated material upto distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and struttingincluding all leads and lift etc.complete. 3 Providing and laying Cast in situ/Ready Mix cement concrete in M-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) including all leads and lift etc.complete. 4 Providing and laying in situ/Ready Mix cement concreteM-20 of trap/ granite/quartzite/gneiss metal for R.C.C.work in foundations like raft,strip foundations, grillage and footings of R.C.C.columns and steel stanchions etc.including bailing out water, formwork, laying/pumping cover blocks,compaction and curing roughening the surface if special finish is to be provided(Excluding reinforcement and structural steel) etc. complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete.With natural sand/V.S.I. quality Artificial Sand, including all leads and lift etc.complete. 5 Providing and laying Cast in situ /Ready Mix cement concrete M20 of trap /granite/quartzite/gneiss metal for R.C.C.columns as per detailed designs and drawing or as directed including centering,formwork,cover blocks ,laying/ pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curingetc.complete,(Excluding reinforcement and structural steel).with fully automatic microprocess or based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Panmixer )etc.complete.With natural sand /V.S.I. quality ArtificialSandincluding all leads and lift etc.complete. 6 Providing and laying Cast in situ /Ready Mix cement concrete M20 of trap/granite/quartzite/gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including centering,formwork,cover blocks,laying/pumping, compaction and roughening the surface if special finish is to be provided and curing etc.complete. (Excluding reinforcement and structural steel).with fully automatic microprocessor based PLC with SCAD Aenabled reversible Drum Type mixer/ concreteBatch mix plant (Panmixer) etc .complete. With naturalsand /V.S.I. quality Artificial Sand including all leads and lift etc.complete. 7 Providing and laying Cast insitu /Ready Mix cement concrete M20 of trap/granite/ quartzite/gneiss metal for R.C.C. slab sand landings as per detailed designs and drawings including centering,formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finishis to be provided and curing etc. complete, (Excluding reinforcement and structural steel). with fully automatic microprocessor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Panmixer) With natural sand /V.S.I. quality Artificial Sand including all leads and lift etc.complete. 8 Providing and laying Cast in situ /Ready Mix cement concrete M-20 of trap/granite/quartzite/gneiss metal for R.C.C. Chajja as per detailed designs and drawings including centering,formwork,cover blocks, compactiong, curing,finishing and roughening the surface if special finish is to be provided and curing etc.complete. (Excluding reinforcement and structural steel).with fully automatic microprocessor based PLC with SCAD Aenabled reversible Drum Type mixer/ concreteBatch mix plant (Panmixer) etc including all leads and lift etc.complete. 9 Providing and fixing in position TMT-FE-500 bar reinforcement of various diameters for R.C.C .pile caps, footings, foundations, slabs,beams, columns ,canopies, staircase, newels,chajjas, lintels, pardis, copings, fins,arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required ,including all leads and lift etc.complete. 10 Providing dry/ trap/ granite/ quartzite/ gneiss rubble stone soling 15 cm to 20 cm thick including hand packing and compacting including all leads and lift etc.complete. 11 Filling in plinth and floors with contractors material/ brought from out side and approved by Engineer incharge in layers of 15 cm to 20 cm including watering and compaction ,including all leads and lift etc.complete. 12 Providing fly ash brick masonry with conventional / Indian Standard type bricks in cement mortar 1:6 in foundation and plinth of inner walls / in plinth of external walls including bailing out water manually, striking joints on unexposed faces, raking out joints on exposed faces and watering ,including all leads and lift etc.complete. 13 Providing fly ash brick masonry with conventional / Indian Standard type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding, including all leads and lift etc.complete. 14 Providing internal cement plaster 6 mm thick in a single coat in cement mortar 1:4 without neeru finish to concrete surface in all positions including scaffolding and curing , including all leads and lift etc.complete. 15 Providing internal cement plaster 20 mm thick in single coat in cement mortar 1:5 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curingincluding all leads and lift etc.complete. 16 Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 mm thick in cement mortar 1:4 using waterproofing compound at 1 kg per cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 mm thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding ,including all leads and lift etc.complete. 17 Providing and laying in situ cement concrete M20 with tremix treatment for 100 mm thickness for flooring with groove cutting of 4mm wide and 20mm deep with necessaryrefilling with bitumen , including all leads and lift etc.complete. 18 Providing and applying white-wash in two coats on old/new plastered or masonry surfaces and asbestos cement sheets including scaffolding and preparing the surface by brushing and brooming down ,including all leads and lift etc.complete. 19 Providing & applying washable oil-bound distemper ofapproved colour and shade to old & new surfaces in two coat including scaffolding, preparing the surfaces ,including all leads and lift etc.complete. 20 Providing and applying two coats of exterior weather shield paint of approved manufacture and of approved colour to the plastered surfaces including cleaning ,preparing the plaster surface ,applying primer coat ,scaffolding if necessary, and watering the surface for including all leads and lift etc.complete. 21 Providing and fixing in position powder coated aluminium louvered windows / ventilator of various sizes with powder coating as per detailed drawing and specifications including aluminium frames 80 x 38 mm x 1.22 mm box type, 5 mm thick sheet glass louvers, of approved quality , including all leads and lift etc.complete. 22 Providing and fixing rolling shutter fabricated from steel laths of minimum thickness 0.9mm with lock plate of 3.15mm thickness reinforced with 35x35x5 mm angle section fitted with sliding bolts and handles for both sides, deep M.S.channel section of depth and thickness not less than 65mm and 3.15mm respectively with hold fast arrangements, M.S.Bracket plate 300x300x3.15mm , including all leads and lift etc.complete. 23 Turbo ventilator 24 24 Conveying materials obtained from excavation including all lifts,laying in layers of 20cm. to 30cm.breaking clods,dressing to the required lines,curves,grades and section,watering and compacting to not less than 97%of standard proctor density for a lead of300m.to500m. inclusive,from the site of excavation to the site of deposition, including all leads and lift etc.complete. 25 Providing & fixing at site self supported trussless pre painted galvailume roofmaterial of base metal thickness should be 1.0 mm thick minimum or as specified by standared self supported roofing company. The PPGL sheet shall be 3 feet (914 mm) width, which shall be curved & moulded at site using mechanical press and dies to desire curves & shape to form 2 feet (605 mm) approximate wide interlocking panels, to close seam foaming water tight joints, Minor colour chipping/ scratching shall be rectified by applying epoxy lacquer. Errection and fixing of seamed sheet, Anchor fastening of axel/ Hilit/ any other standered make fitting/ standard make having diameter of metal bolt 12 mm dia having 150 mm length two bolts per panel (605 mm wide) on each side of panel in zig zag pattern and 3 bolts for 5 panels starting and ending sides, including all labour, scafolding required suitable capacity of cranes for fixing including all necessary fixture & fastening all accessories electrical hangers, clamps for electrial fittings etc. complctc. Including all incidental charges 6uch as electrical/ water etc. complete with lead and lifts with Performance Bank guarantee of ten years of equal amount of contract value of roof.structure alike proflex system with unobstructed span 15.0 M (TCT 1.00 mm thickness) having arch rise of 16% for full span structure design for roofing system to withstand the wind load and deed load as per IS 875 part 3 and Earthquake load as per IS 1893 A sheet for structure off whité top colour & grey bottom colour and light green colour roof structure at 5.00 m interval PPGL,including all lesds and lifts etc.complete. 26 Royalty Charge (B) 27 For Murum 28 Soling 29 Laboratory test of construction material 30 BASIC TEST OF AGGREGATE 31 Water Absorption, Specific Gravity,Impact Value, Crushing Value. 32 Sieve Analysis. 33 Abrasion Value. 34 Flakiness Index & Elongation Index. 35 BRICKS 36 Water Absorption (Set of 5 Bricks), Compressive Strength( Set of 5 Bricks), Efflorescence (Set of 5 Bricks). 37 CONCRETE 38 Compressive Strength OF C.C. Cube (Set of 3 cubes) 39 STEEL 40 Steel bar testing upto 16 mm (set of 3 bars)(Tensile strength, %, Elongation, Yield Stress,Weight-Per Meter, Bend / Rebend Test, Proof Stress.) 41 Management Strategies and Implementation Plan (MSIP) to manage the Environmental, Social, Health and Safety (ESHS) risks and ESHS Code of Conduct
