Tender For Major Repair Works Under State Budget Head At Gsss_Arathwara (Sheoganj), Sirohi-Rajasthan

Tender For Major Repair Works Under State Budget Head At Gsss_Arathwara (Sheoganj); 1 Dismantling roofs with care including stacking of serviceable material and disposal of unserviceable material with in 50 Mtr. lead for : lime terace 2 Dismantling old plaster or skirting, raking out joints and cleaning the surface for plaster incl. disposal of rubbish to the dumping ground within 50mtr lead 3 Grading roof water proofing treatment with :Cement concrete 1:2:4 (1-Cement:2-coarse sand :4-graded stone aggregate 20mm nominal size). 4 Providing and laying 20 to 25 mm size glazed tiles pieces for rooof treatment having colour and shade as approved by the Engineer incharge over 25 mm thick layer of cement mortar mix 1:4 with application of cement slurry including finishing of joints with ordinary cement and curing etc. complete in all respect. Washing with acid. 5 Providing batta (gola) 75mm x 75mm in cement concrete (1:2:4) including finished with cement mortar 1:3 as per standard design. 6 Plaster on new surface on walls in cement sand mortar 1:6 including racking of joint etc. complete fine 20mm thick 7 6 mm thick cement plaster to ceiling of mix1:3 (1cement : 3-fine sand) 8 Applying white cement based puttyover cement plaster surface for making even surface 9 Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade including all scaffolding:New work (Three or more coats). 10 Desmantling of floring with care including stacking of servceable material and diposal of unserviceable material with in 50 Mtr. Lead forCement concrete flooring 11 Painting with ready mix paint of approved brand and manufacture in all shades to give an even shade :NEW steel work (One or more coats). 12 Providing and laying in position cement concrete including curing compaction etc. of specified grade excluding the cost of centering and shuttering =All up to plinth leve1:3:6 (1Cement :3 Course Sand :6 Graded stone aggregate 20 mm nominal size 13 Polished Blue Kota Stone flooring skirting, jaid over 20mm thick base of C.M. 1:4 and jointed with grey cement slurry to match the shade of the slabincluding rubbing and polishing completeFor area of each slab up to 2001 to 5000 Sq. Cm 14 Providing and fixing steel gate, grating , and grills made of angles, tees, square bars, flats,or black pipe with holdfast and fittings complete as per design and drawing including cutting welding and fabrication with priming coat of red oxide 15 Earth work in excavation by mechanical means (Hydraulic excavator )/ manual means over areas (exceeding 30cm in depth. 1.5m in width as well as 10 sum on plan) including disposal ofexcavated earth, lead upto 50m andlift upto 1.5 m , disposed earth to be levelled and neatly dressed: All kinds of soil. 16 Providing and laying in position cement concrete including curing compaction etc. of specified grade excluding the cost of centering and shuttering All up to plinth level IS 456-2000:1:4:8 (1Cement :4 Course Sand :8 Graded stone aggregate 40 mm nominal size 17 Random Rubble stone masonary for superstructure above plinth level one storey height above 30 Cm. thick walls IS 1597 (Part-I) 1992 in :Cement Mortar 1:6 (1-Cement:6-Sand). 18 Brick masonary with F.P.S bricks of Ist Class Designation in superstructure above plinth level upto floor Vth level in all shapes and sizes in Cement mortar 1:6 ( 1 Cement :6 Coarse sand) 19 Providing and laying in position cement concrete including curing compaction etc. of specified grade excluding the cost of centering and shuttering All up to plinth level IS 456-2000:1:2:4 (1Cement :2 Course Sand 4 Graded stone aggregate 20 mm nominal size 20 Polished Blue Kota Stone flooring skirting, jaid over 20mm thick base of C.M. 1:4 and jointed with grey cement slurry to match the shade of the slabincluding rubbing and polishing completeFor area of each slab up to 2001 to 5000 Sq. Cm 21 Plaster on new surface on walls in cement sand mortar 1:6 including racking of joint etc. complete fine finished: 25 mm thick. 22 Painting with syntheitic enamel paint of approved brand and manufacture in all shade to give an even shadenew steel work (2 or more coat on new work). 23 Providing corrugated G.I. Sheet roofing fixed with G.I. J or L hooks bolts and nuts 8mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead and including a coat of approved steel primer and two coat of approved paint on over lapping of sheet complete (upto a pitch of 600) & excluding the cost of purlins rafters and truses, for class of sheet :0.80 mm thick. 24 Providing and fixing steel gate grating and grills made of angles, tees, square bars or other flats black pipe with holdfast and fittings complete as per design and drawing including cutting welding and fabrication with priming coat of red oxide. 25 Electricity Works - Wiring of light point/fan point/exhaust fan point/ call bell point with 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper conductor 1.1 KV grade and 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper earth conductor 1.1 KV grade (IS: 694) of approved make group-2Light point / fan pointShort point (up to 3 mtr.) 26 Medium point (up to 6 mtr) 27 Long point (up to 10 mtr) 28 Wiring of 3 pin 5 amp. light plug point with 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper conductor 1.1 KV grade and 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper earth conductor 1.1 KV grade (IS: 694) of approved make in surface/reces group - On board 29 S & F follwing sizes (dia.) of ISI marked medium duty PVC conduit along with accessories in surface/ recessed using clamps, fastener as required including cutting the wall , covering conduit with wire mess and making good the same as required. Group-2 25 mm dia 30 Supplying and drawi;ng FR PVC insulated & unsheathed flexible copper conductor ISI marked (IS:694) of 1.1 kV grade and approved make in existing surface ofr necessed conduit/ casting capping including making connections etc. as required. Group-22 x 1.5 sq. mm 31 2 x 2.5 sq. mm 32 P & F 240/415 V MCB of breaking capacity not less than 10 KA (B/C/D tripping characteristic) ISI marked IS 8828 (1996)/conforming to IEC 60898 in existing board/ sheets including making connections with lugs, testing etc. as required. Group-2 6 A to 32 A rating 33 P & F strip fluorscent tube fitting fabricated from (CRCA sheet and finished with powder coating/stove enamelled non corrosive UV resist EP channel) complete with accessories(Low loss copperchoke, starter, starter seat)/Electronic choke with terminal block duely prewired with copper conducter including making connection, testing etc. as required(Without tube)1x36 watts with OCCB. Group-2 34 P & F Fluorscent tube rod in existing fixtures as required, minimum 3 star rating,36/40 watts 35 P/I aying PVC insulated & PVC sheathed cable of 1.1 kV grade with aluminium conductor of IS:1554 P-I of Groups of approved make in ground as per IS:1255 including excavation of 30cm x 75cm size trench, 25cm thick under layer of sand, Iind class bricks covering, refilling earth, compaction of earth, making necessary connection, testing etc. as required of size 6 sqmm, 4 core arm 36 P & F star rated double ball beari;ng capacitor start, aluminium body and blade ceiling fan with down rod upto 30 cm with 3x1.5 sqmm pvc insulated flexible copper conductor making connection testing etc as required.1200 mm sweep 3 star rated 37 P & F ISI marked 6 amp bakelite batten/ angle holder including making connextion testing etc as required 38 P & F modular type 120W step fan regulator duly ISI mark 5 step fan regulator 2 module 360 degree rotating

INR 1000 /-

INR 35300.0 /-

INR 17.65 Lakhs /-