Tender For Construction Of 07 Shopsin Nagar Panchayat Harduaganj - Cleaning Jungles Including Uprooting Of Rank Vegetation, Grass, Bushes Wood Trees And Saplings Of Girth Up To 30 Cm Measured At A Height Of 1 Metre Above Ground Level And Removal Of Rubbis, Aligarh-Uttar Pradesh

Tender For Construction Of 07 Shopsin Nagar Panchayat Harduaganj - Cleaning jungles including uprooting of rank vegetation, grass, bushes wood trees and saplings of girth up to 30 cm measured at a height of 1 metre above ground level and removal of rubbish up to a distance of 50 m outside the periphery of area cleared. 2 Excavation in roundation in ordinary soil Loom clean or sand in cooling lift up to 1.50 M and lead up to 30 M and including feeling watering and rhyming of activated Earth into trenches or into the space between The building and the sides of foundation trenches or into the plinth and removal and disposal of surplus earth as directed by engineer incharge up to distance of 30 M from the foundation trenches. 3 Andtermite treatment of the bottom and sides of excavaction@5liter/sqm of surface area with chemical emulsion with chlarpyriphous/Lindaue E.C. 20% with 1% concentration complete item. 4 Providing and leaving cement concrete in 1:5:10 (1 cement 5 course sand 10 graded stone aggregate 40 mm nominal size) and curing complete including cost of formwork in foundation and floor. 5 Reinforced cement concrete work in walls (any thickness) including attached pilasters buttersses plinth and string courses fully columns pillars piers abutments post and struts etc including cost of centreing finishing and excluding the reinforcement 1:1,5:3 (1 cement : 1.5 course send :3 aggregate 20 mm nominal size). 6 Class 150 (non modular) brick work in 1:6 cement and coarse sand mortar in foundation and plinth including supply of all material labour and T&P etc. required for proper completion of the work. 7 Earth work in cutting or in embankment in ordinary soil excavation to be in the form of regular pits not exceeding 0.50 m in death and earth work in embankment to be in 20 cm layers including ramming and dressing the surface to required levels and slopes and also including 1.5 m lift and 30 m lead. the earth in form of cutting to be used as spoil banks with in 50 m distance As directed by engineer in charge and 3 km cartage of Earth. 8 Sand filling in plinth including supply of necessary quantity of local sand from the site of work and including watering dressing extra required for proper completion of work. 9 Class 150 (non modular) brick work in 1:6 cement and coarse sand mortar in superstructure above plinth up to Floor 5 level including necessary cutting and moulding of brick work as required and also including any honeycombed brick work in thickness of wall more than 12 cm and including supply of all materials labour and T&P etc required for proper completion of the work. 10 Class 150 (non modular) brick work in 1:4 cement and coarse sand motor in foundation and plinth including supply of all materials labour and T&P etc. required for proper comletion of work. 11 Mild steel aur iron work in clean work such as reinforced concrete or reinforced brick work (when not included in and an overall rates) brought to required shape as necessary including bending for proper completion of the work and excluding the supply of steel and its wastage band hooks and anth thourized Overlapping shall we measured up to floor to level. 12 12 mm cement plaster with cement mortar in proportion of 1:6 cement and find sand (Dholpur sand) (not less than in 1.25 FM) of single coat of interior plastering up to floor two level including internal rounded angles not exceeding 80 mm in girth and finished even and smooth. 13 20 mm cement plaster 1:3 (1 cement 3 coarse sand) finished with 3 mm thick floating Coat of Neet Cement. 14 Mild steel aur iron work in heavy sizes such as built up gates record rack roof work gates etc brought to required form including drilling holes riveting or welding where necessary and also including supply of Steel bolts nuts wastage etc. and their fixing required for proper completion of the work. 15 Supply in fixing of rolling shutter of approved make complete item. 16 Providing & fixing of 27.5 cm long wire spring grade 2 for rolloing shutter. 17 Providing & fixing of ball bearing for rolling shutter. 18 Finishing walls with water proofing cement paint of approved makes such as supercem durocem robiance guttacem supercem quality and or required shade on undecorated wall surface (one coat) over and including one coat white cement primer to give an even shade after thoroughly brushing the surface. 19 Painting two coat and applying priming coat over new steel and other metal surface up to 10 cm in width or girth or small not exceeding 0.10 sqm area after and including preparing the surface by thoroughly clearing oil greece dust and other foreign matter and scoured with wire brushed, fine steel/wood scraper send preparing and knotting including cost of all materials Labour T&P etc required for proper completion of work. 20 Finishing wall with putty approve brand and manufacturer and of required shade on undecorated wall surface to give even shade over including curing and cost of all material labour T&P etc. required for proper completion of work. 21 Cement concrete flooring in 1:2:4 (1 cement 2 coarse sand 4 graded stone of size 20 mm nominal size) laid in one layer finished with floating coat of Neat Cement 40 mm thick floor. 22 Providing and laying brick coba 12 mm thick laid with m-150 class brick bat coba 7.50 cm thick with gap 15 mm to each other over 20 mm thick base of cement mortar 1:4 cement and coarse sand mixed with waterproofing compound spreading cement slurry mixed with acrylic cement concrete waterproofing compund filled with gaps of coba and top of coba motor mixed with waterproofing compound in 1:4 cement and coarse sand morter finish smooth and top mashed false 30cmx30cm and side wall perapet shall be monolithic plaster wall up to 30 cm higher and junction and corner shall we rounded by brick ballast cement and coarses sand masonry with top finished plaster mixed with acrylic water proofing compound @ 2% by weight and including supply of material labour T&P complete of work. 23 Providing and fixing first quality ceramic glazed wall tiles conforming to IS:15622 (thickness to be specified by the manufacturer) of approved make in all colours shades accept burgundy bottle green black of any size as approved by engineer in charge in skirting risers of steps and dados over 12 mm thick bed of cement morter 1:3 (1 cement 3 coarse sand) jointing with grey cement slurry @ 3.3 kg per square cement mixed with pigment of matching shade complete. Making khuras 45x45 cm within average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement 2 coarse sand 4 grade stone aggregate of 20 mm nominal size) over PVC sheet 1mx1mx400 Micron finished with 12mm cement plaster 1:3 (1 cement 3 coarse sand) and a coat of neat cement rounding the edges and making and finishied the outlet complete. 24 Providing and fixing on wall face unplasticised rigid PVC rainwater pipes conforming to IS: 13592 type A including jointing with seal ring confirming to IS 5382 leaving 10 mm gap for thermal expansion single socket pipes. 25 Providing and fixing water closet squatting pan (Indian type WC pan) with 100 mm sand cast iron P or S trap 10 litre low level white PVC flushing systern including flush pipe manually controlled device (handle lever) confirming to IS:7231 with all fitting and fixtures complete including cutting and making good the walls and floors wherever required White vitreous China Orissa pattern WC pan of size 580x440 mm with integral type footrests. 26 Providing and fixing wash basin with C.1. brackets, 15 mm C.P. brass pillar taps 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require. White Vitreous China flat back wash basin size 550x400 mm with single 15 mm C.P. brass pillar tap. 27 Providing and fixing white vitreous china flat back or wall corner typelipped front urinal basin off 430x260x350 mm or 1340x410x265 mm sizes respectively. 28 Providing and fixing 110 mm diameter PVC pipe conforming to IS make working pressure 6 kg/sqcm including testing 1 labour T&P and all complete fittings. 29 Providing and fixing C.P. brass stop Cock (concealed) of standard design and of approved make conforming to 1 IS:8931 (15 mm nominal bore) 30 Providing and fixing C.P. brass Bib cock of approved quality conforming to IS:8931 (15 mm nominal bore) 31 Providing and fixing C.P. brass Angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 (15 mm nominal bore) 32 Providing and fixing 75 mm diameter PVC pipe conforming to IS make working pressure 4 kg/sqCm including testing 1 labour T&P and all complete fittings. 33 Providing and fixing 20mm dia nominal bore G.I. Pipes complete with G.I. fittings and clamps. Including cutting and 1 making good the walls etc. 34 Providing and fixing 15mm dia nominal bore G.I. Pipes complete with G.I. fittings and clamps. Including cutting and 1 making good the walls etc. 35 Supply and hoisting of sintex orr equivalent high density polyethylene seamless of piece moulded tanks and placing including all taxes, labour and 1 T&P etc. for proper completion of work. Tank should be ISI marked. Sintex or equivalent

INR 4720 /-

INR 398841.0 /-

INR 39.88 Lakhs /-

FileName	File Description	File Size
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB