|
| 1 | REMOVING OLD FITTINGS:Removing existing rusted damaged / defective flush tank wash basin / urinals / sinks / E.W.C. and I.W.C. etc. includingall internal fitting and handing over to dept. etc complete all as directed bythe engineerin charge. |
| 2 | Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge.In cement mortar |
| 3 | Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : |
| 4 | HALF BRICK WORK:Half brick masonry at all floow level using well burnt locally available bricks of approved quality in cement mortar 1:4 at all floors providing R.C.C. patti in 1:2:4 (105x75mm) 900mm ht. For full width wall including scaffolding raking out joints curing etc. complete all as directed by the engineer in charge. (a) In partition wall with RCC stiffners & as supports to kitchen platform, shelves, cupboards, flower bed etc. without M.S. rods ( disposing / taking away the debris outside the premises & disposing as per the guidlines of statutory authoritised. ) Brick work with common burnt clay F.P.S. (non modular) bricks of classdesignation 7.5 |
| 5 | CEMENT PLASTERING:Cement plastering for internal wall and ceiling with cement mortar 1:4 finished smooth with neeru over brick wallsor concrete surfaces including hackingthe concrete surfaces at all floors and levels in quantities asrequired at site Including scaffolding curing etc. completeall as directedby Engineer in charge ( disposing / taking away the debris outside the premises & disposing as per the guidlines of statutory authoritised. ) 20 mm thick for wall |
| 6 | VITRIFIED TILES FOR FLOOR AND DADOProviding and laying vitrified floor tiles / wall tile in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete.Size of Tile 600x600 mm |
| 7 | BRICKBAT COBA :Providing water proof brick bat coba for filling in the depressions and sunken portions in toilet bathrooms W.C. drying area etc. at all floorsand locations as per the specifications of specialized water proofing agencies and finishing the top surfaces even using c.m. 1:3 and approved water proofing compound 2% cement weightetc. complete all as directed by the engineer in charge.Note: The measurements shall be on cubic meter basis.No deductions shall be made for the areas occupied by w.c. pans and other fittings and fixtures ( disposing / taking away the debris outside the premises & disposing as per the guidlines of statutory authoritised. ) Depth from 9inch to 24inch thick |
| 8 | WASH BASIN : Providing & fixing best quality wash basin of approved colour & size with following items as specified.Providing & fixing white / colour glazed vitreous china ware wash basin of make Hindware with semi punched tap holes for fixing the tap in different position in the basin, mounting the set over a suitable C.I. bracket etc. as approved by & Fixing 32mm size C.P. / PVC brass/ a bottle trap with extension piece wall flanges (heavy quality) jointing with white Zinc & Spun yarn & fixing 15mm dia PVC water inlet connection of required length with C.P. brass unions at end & fixing 32mm dia C.P brass heavy quality waste coupling with C.P. brass ball chain & rubber plug & fixing 15mm C.P brass fancy stop cock including cost of jointing materials etc. as per requirement & Fixing C.P. brass 15mm dia fancy pillar tap or approved pillar tap of make,BMC approved including cost of jointing materials etc. Testing the entire system to the full satisfaction of theengineer in charge wash basin model No.10001/10004 ofhindware.Parryware/CeraWHITE COLOUR 550mm x 400mm |
| 9 | E.W.C.:Providing and fixing european water closet suits wash down pattern best Indian makein white glazed vitreous ofHindware/Parry ware/cerawith integral‘P’ or ‘S’ trap as per approved make with left or right vent in position including fixing it on chair bracket or wall bracketwith necessary C.P. brass screws & plugs etc. complete all as directed by the engineer in charge.Floor mounted EWC Universal white colour |
| 10 | Making core cutting of 6 inches dia in slab of require depth etc complete |
| 11 | FLUSH TANK :Providing & fixing approved quality 10 ltrs. Capacity champion (ISI) plastic flushing cistern with all internal fittings pull chain etc. mounted on brackets and connecting to the existing supply complete & outlet connection low / high level plastic cistern of champion/ Hindware/ parryware ware make (ISI)(work includes removing old fixtures also) White Colour |
| 12 | FANCY FITTINTGS : Providing 15mm dia C.P. brass fancy fittings weighing not less than 600gm RMC approved make (latest) and conforming to IS 781-1977 and fixing with pipe line including cost of jointing materials and pressure of 10 kg / CM2 and rectifying the leaky joints if any complete as specified & directed for the following. (work includes removing old fitting and fixtures and handing over the same.) |
| 13 | Bib tap fancy(SEIKO ) |
| 14 | Fancy angle stop cock with Flange SEIKO make ( cat no.58) |
| 15 | Hand spray with PVC connection mahindra make ( 1 mtr.long) |
| 16 | Fancy Bib tap two in oneJaquar make Sieko make |
| 17 | NAHANI TRAP ;Providing & fixing 100mm diaC.I. heavyduty nahani trap with brass C.P. dome type heavy duty S.S. Jali all as approved make quality as specified &directedby engineer in charge one way / two way need concrete joints |
| 18 | Providing & fixing heavy quality C.P connection 15mm n.b. inlet connection with all brass unions at the ends as per site requirement and as directed by the engineer in charge. (work includes removing old fixtures also)size 600mm long |
| 19 | Labour charges only for carefully removing and taking out existing wooden partitions (partly glazed, partly panneled or fully panneled with shutters glazing etc. at all floor levels and locations including removing the existing mongery fittings fixtures locking arrangement and handling over the same to T.M.C all complete as directed by Engineer-In-Charge. |
| 20 | Labour charges only for making and fixing in position of wooden partition as per requirement from existing material supplied by department, etc. complete, the hardwares such as screws/nails fevicols etc. should be used at his own by the contractor etc. complete as specified and as directed by the Engineer-In-Charge. |
| 21 | Providing and fixing in position/flush door of shutters block board solid core internally lipped bonded with water proof type synthetic resinhot pressed with marine ply finished on both faces including prov. And fixing teak woodlipping on all sideswith making necessary vision pannel of required size by using 4mm thick plain or frosted glass with T-W lipping patti all around ,fixing heavy duty approved make 4 levers mortice lock of deco with pair of handle of approvd make and quality brass/S.S. fittings such as hinges, tower bolts, of approved make fixing fixtures locking arrangementswith screws etc. applying one coat of approved wood primer etc. all complete as specified and directed by Engineer-In-Charge.Door shutters with locking arrangement 4 lever mortice lock with handle set of approved make.40mm thck |
| 22 | Removal of old formica along with the adhesive making the surface smooth and providing and fixing new approved of required specification and colour etc. complete as specifiedand directed including fevicol, nails etc. complete.1.00 mm thick |
| 23 | Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main \"T\" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross \"T\" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main \"T\" at 600 mm center to center to form a grid of 1200x600 mm and secondary cross \"T\" of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main\"T\" runners to be suspended from ceiling using GI slotted cleats ofsize 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanisedbutterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mmcenter to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete forall heights as per specifications, drawings and as directed byEngineer-in-charge. |
| 24 | GI Metal Ceiling Lay in plain Tegular edge Global white color tiles of size 595x595 mm, and 0.5 mm thick with 8 mm drop; made of G I sheet having galvanizing of 100 gms/sqm (both sides inclusive) and electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending. |
| 25 | Mirror 24 inch x 18 inch(Plastice frame) |
| 26 | Providing and fixing heavy duty 32mm dia s.s. curtain rodwith socket removable threaded type with rings for curtain to be provided at 5 inch intervals etc. complete. |
| 27 | Providing and fixing heavy duty SS grab bar of approx size 300mm long with necessary flange & as directed by Enggineer -in- charge |
| 28 | Providing making and supplying computer table made out fo 19mm commercial ply for table top, mounted on the vertical side fo 19mm commercial ply and cabinet made out of 19mm commercial ply for sides, shelves and shutters making concealed monitor arrangement by providing 8mm thick clear glass on table top of required size with edge polishasshown in drawing drawer and wooden approvedkey board drawer with heavy sliding channels, withhandle for shutter,cable manager drawers all edges shall be lipped with 6mm thick T.W. lipping patti. All exposed faces should be 1.0mm thick laminate of approved colour and non laminated area should be french poll-shed including cost of other materials labour etc. as per drawing and as specified and directed by Engineer-In-Charge.Computer table with all inner surface with 0.8 mm thick approved laminate |
| 29 | Hermetcially Sealed automatic sliding door size 1500 mm x 2100 mm can withstand upto 100 Pa overpressure and noise insulatuion of 28dB. Thickness of door panel is 60mm with 4mm thick high pressure laminate (HPL) inside & outside puff sandwich of 52mm. Special grade self lubricating roller with double ball bearing and removable EPDM sealing, gasket fitted to the vertical profile and top rail of the pressure laminates conforming to EN 438-3:2005. Door profile construction comprises of aluminium alloy, grade 6063, 300x300 vision panel is made of insulated glass unit flushed with door surfaces, solid AISI304 grade SS lever handle for effortless manual operation in case of power failure or D-Type handle. It comes with microprocessor based controller (SDA-04), CE marked, 90W AC motor, IP65 Protection class (CE marked). AISI304 grade SS foot switch, magic switch and elbow switch with high quality inductive sensors. Electrical and Civil work related to automation of door. |
| 30 | Hermetcially Sealed automatic sliding door size 900 mm x 2100 mm can withstand upto 100 Pa overpressure and noise insulatuion of 28dB. Thickness of door panel is 60mm with 4mm thick high pressure laminate (HPL) inside & outside puff sandwich of 52mm. Special grade self lubricating roller with double ball bearing and removable EPDM sealing, gasket fitted to the vertical profile and top rail of the pressure laminates conforming to EN 438-3:2005. Door profile construction comprises of aluminium alloy, grade 6063, 300x300 vision panel is made of insulated glass unit flushed with door surfaces, solid AISI304 grade SS lever handle for effortless manual operation in case of power failure or D-Type handle. It comes with microprocessor based controller (SDA-04), CE marked, 90W AC motor, IP65 Protection class (CE marked). AISI304 grade SS foot switch, magic switch and elbow switch with high quality inductive sensors. Electrical and Civil work related to automation of door. |
| 31 | Supplying & fixing S.S. Shelf of approx. size 2\" x 1\" of 304 grade with L type support including transpot, labour chargres, profit, wastage etc. to wall etc. complete. |
| 32 | Supplying & fixing S.S. Scrub sink of approx. size 900 x 675mm x 750 deep of 304 grade with C. P. Elboe action tap including transpot, labour chargres, profit, wastage etc. to wall etc. complete. |
| 33 | Corner wash basin Model No.10031of hardware/ Parryware/Cera,white coour, Size 450mm x 390mm etc.complete. |
| 34 | Supplying & fixing S.S. false ceiling of 304 grade with support including transpot, labour chargres, profit, wastage etc. to wall etc. complete. |
| 35 | Providing & fixing of 2mm thick vinyl conductive flooring, 100% recycled PVC flexible homogeneous compacted floor covering in roll of size 2mtrs width having total weight not less than 2900 g/m2, suitable for use in labs and OT’s etc. and conforming to static electrical resistance EN1081 104 ≤Rt ≤106 ohms with incorporated carbon encapsulated granules throughout its full thickness and has a conductive backing to ensure optimal and constant conductive properties throughout its full life expectancy. Its surface should be densely compacted for improving wear and ease of maintenance. It should have anti-bacterial and fungicidal properties. The flooring shall incorporate a specially formulated PUR+ Iodine stain free - UV Protected (No bacterial growth) Surface Treatment or Evercare Surface Treatment or RQ Surface Treatment to avoids staining of chemical products used in healthcare like betadine, eosin or anti-bacterial hand gel and increases the durability of the flooring. And should complies with the (34-43) as per EN 685,(Group ‘ T ’) wear rating as per NF 189 Or shall have binder content of Type I as per ISO 10581 and should have residual indentation of ≈0.03mm as per EN 433. |
| 36 | It should also confirm to class Bfl-s1 in flammability test as per EN13501-1, slip resistance of R9 as per DIN 51130 class & colour fastness ≥6 degree as per EN 20105-B02.It incorporates bacteriostatic and fungistatic actions, tested for Anti-bacterial activity. It should have low VOC contain as TVOC after 28 days <10 µg/m3 as per ISO 16000-6. 100% REACH compliant. Floorscore certified.The joints in the flooring should be sealed by using a PVC welding bar of matching colour to be supplied by the manufacturer, using a hot air gun for fusion of welding bar with flooring. A copper strip of 15mm wide & 0.05mm thick should be laid under the tiles, with one earthing point for every 250 sft of area. The vinyl sheet shall be laid & fixed with water based adhesive preferably AROBOND-44 of M/s. Arofine make or VC 31 & SR998of M/s Pidilite Ind. or any other make as per manufacturer’s specification as per direction and the entire satisfaction of Engineer-in-charge complete.Note: Measurement will be consider as per actual. |
| 37 | POINT WIRING :- Point wiring for light/fan/bell with ISI mark 3 x 1.5 sq.mm (P+N+E). FRLS PVC insulated copper conductor of Polycab / RRK /Finolex in surface/ recessed heavy class pvc casing capping/conduit of Presto-plast/sunwood /Precision make with Modular switch of Legrand-Myrius/MK-Blenze & Anchor make-ceiling rose/batten holder/slanting holder Boxes etc. with circuit labling/marking/ferruling complete. |
| 38 | Primary point upto 4 mtrs length |
| 39 | Primary point length 4 mtrs to 7 mtrs |
| 40 | Concealing of 25mm dia. Pipe with surface finish. |
| 41 | DISMANTLING & REPAIRING :- Providing qualified workmen for dismantling the existing light, fan, bell, independent plug point wiring of all types with Electrical accessories and cable /switchgear per instruction of Engineer Incharge |
| 42 | Supply & installation of consealed Electrical BoardLegrand-Myrius/MK-Blenze (inclusive of back box, surface plate & wiring, ferruline) |
| 43 | 6A socket-2 nos+6A switch 2 nos |
| 44 | 6A socket-3 nos+20A switch Cat. No. 6730 75 |
| 45 | 16Amp Socket + 16A Switch with Indicator |
| 46 | Telephone Outlet with telephone I/O, back box and face plate in all respect (without telephone wire) |
| 47 | SUB MAINSMains :- Providing Heavy duty PVC casing-caping/conduit of Precision make. Supplying and erecting mains with copper conductor PVC insulated FRLS of 1100 V AC grade Polycab/RRK/Finolex make wire with circuit labling/marking/ferruling complete. |
| 48 | 2 x 2.5 sq mm -+ 1.5sqmm Earth wire |
| 49 | 2 x 10 sq mm -+ 6sqmm Earth wire |
| 50 | Supply and Fixing Rigid PVC conduit Medium Mechanical Stress (MMS) with all fitting & fixing accessories Precision make |
| 51 | 16 mm |
| 52 | 20 mm |
| 53 | Supply and Fixing PVC Flexible Conduits Poly Proplyne (PP) with all fitting & fixing accessories Precision make25 mm |
| 54 | Supplying, erecting, testing and commissioning of 1100 V AC PVC FRLS armoured 3 1/2 core Aluminium Conductor cable of Polycab/RRK/Finolex make erected on wall/beam/ceiling/shaft etc with appropriate size, along with saddlers,spacers complete with approved manner of following size . . 3 x 16 sq mm Al |
| 55 | Cable Glands - Double Compressionwith Termination:- Supplying and erecting heavyduty flange type brass cable glands for armoured cable with brass washers,rubber rings complete erected with cable ends & leads connected with proper size lugs.Make Comet/Braco/Dowells.3 x 16 sq mm Al Armour Cable gland |
| 56 | Cable Lugs :- Supplying & erecting crimping type Aluminium lugs confirming to IS standard suitable for cables upto evenly crimped with high pressure tool and connected to switch gear terminals with brass /cadmium plated nut bolts in an approved manner and other accessories.Make Dowell |
| 57 | 16 sq mm |
| 58 | LIGHT FixturesSupply,installation,testing and commissioning of fixtureson wall/beam/slab by means of bracket ,anchor fastener suspended from slab/beam by means of 19 mm dia conduit pipe/down road,ball and socket arrangement,flexible twisted wire/ flexible cable connection etc andGI chain for recessed mounting fitting complete in all respect as directed by Engg. in charge and Philiphs make or any other approved make as per instructions of EIC. |
| 59 | Light fixture ultra slim LED panel Square 15W IP20 6500K Philips make |
| 60 | Light fixture ultra slim plus LED panel Round 7WPhilips make |
| 61 | Distribution Boards Supply, installation, testing & commissioning DBs for mounting MCB/ELCB/Isolator- on wall complete.SPN12 way IP 43 with Acrylic door |
| 62 | SITC of Legrand DX3 make AC C Curve MCB of following sizes in provided enclosure and connected with leads on incoming and outgoing side duly completed in approved manner. |
| 63 | 6 to 32 A SP MCB 10 KA |
| 64 | 40 to 63 A SP MCB 10 KA |
| 65 | 40 to 63 A TP MCB 10 KA |
| 66 | Metal Encloser for DP/TP/FP MCB |
| 67 | Providing ,fixing and commissioning of Legrand DX3 make RCBO16A/32A DP - 100 mA |
| 68 | Modular RCBO - Single pole + Neutral 30 mA, 16 A - 230 VA 2 module with consealed back box face plate in all respect with wire connections. |
| 69 | Telephone Wiring :- Supplying and laying 0.5 mm gauge unarmoured telephone wire D.O.T approved, make Dlink/Finolex/Digilink/Polycab through exisitng conduit/casing caping/cable tray.2 Pair |
| 70 | Supply and installation of Telephone Instrument Panasonic KX TS 500 Black Colour. |
| 71 | Supply installation testing commissioning of 6KVA Online UPSwith all input output cableing as per site requirments,Double conversion,pure sine wave output, inbuilt battery,1Ph in, 1Ph out, Full load backuptime 1 hrs,Make- APC/Emerson/Vertive/EATON |
