|
| 1 | A-FURNITURES & CHAIRS Providing & Installation OfHigh Back Chairs. For: Conference Room Model: OCP 664APremium High Back Executive chair, with ergonomic back support, cushioned & upholstered in Composite leather, with Smart syncro tilt mechanism any position locking bolt, with Spl T reinforced arms, fitted with class iv hydraulic gas pump, fitted on 5 leg heavy metal base.Drawing No 1 in Site Plan and Drawings |
| 2 | Providing & Installation of Medium Back Chairs.Model: OC , RIVAMedium Back chair, with adjustable handleswith Smart syncro tilt mecanhism any position locking bolt, with Spl T reinforced arms, fitted with class iv hydraulic gas pump, fitted on 5 leg heavy metal base.Drawing No 2 in Site Plan and Drawings |
| 3 | Providing & Installation of High Back MD Cabin Chairs :Model: OCP 601APremium High Back Executive chair, with ergonomic back support, tilting mechanism with any position locking, cushioned & upholstered in Composit leather, with cushioned arms, fitted with class iv hydraulic gas pump, fitted on 5 leg heavy metal base.Drawing No 3 in Site Plan and Drawings |
| 4 | Providing & Installation ofCafetaria chairs – Casper Chairs made of polypropylene in choice of colours, stackable.Drawing No 4 in Site Plan and Drawings |
| 5 | Providing & Installation of Cafe Table – Heavy pipe metal frame, powder coated with Granite top of size 36” x 36”.Drawing No 5 in Site Plan and Drawings |
| 6 | Providing & Installation of Sofas – Three Seater. With wooden frame, cushioned in high density foam & upholstered in C. Leather or fabric. |
| 7 | 3 seater sofa( 1800mm wide)Drawing No 6a in Site Plan and Drawings |
| 8 | 2 seater Sofa ( 1350mm wide)Drawing No 6b in Site Plan and Drawings |
| 9 | 1 seater sofa ( 900mm wide)Drawing No 6c in Site Plan and Drawings |
| 10 | Center Table of sixe 1100mmx600mm with 10 mm thk tougfened glass top.Drawing No 6d in Site Plan and Drawings |
| 11 | Corner Table of size 600mmx600mm with 10mm thk tougfned glass top.Drawing No 6e in Site Plan and Drawings |
| 12 | Providing & Installation of MD & ChairmanCABIN TABLE- 2100L x 750D x 750Ht :Tabletopmadeof18mmACRYLICsoilid surface(Corian/HIMACSbrand) top,edge polished with under support of designer 50mm MS powdercoated legs under support withprovisionforelectrical&datawiring. Legrand Power & Data ports inlaid to Corian top.Drawing No 7 in Site Plan and Drawings |
| 13 | Providing & Installation of FileStorage for MD & Chairmancabin :5600Lx400Dx900Husing 18mm Prelam Particle board with Drawers, openable shutters, Handle, lock, shelves provided.Drawing No 8 in Site Plan and Drawings |
| 14 | Providing & Installation ofWorkstation TABLE- 1500L x 600D x 750Ht : Table top made of 25mm thk Prelaminated Particle board, with 50mm MS powdercoatedlegsundersupportwith power&dataraceway.Softboard/Marker board partition & 8mm laminated color glassdivider.Power&Dataraceway provided below table top.Drawing No 9 in Site Plan and Drawings |
| 15 | Providing & Installation of SIDE CREDENZA: 900L x 400D x 750Husing 18mm Prelam Particle board with combination of drawers & Openable shutters, Handle, lock, shelves provided. |
| 16 | Providing & Installation ofCONFERENCE TABLE- 4600L x 1500D x750Ht:Tabletopmadeof18mmACRYLIC soilidsurface(Corian/HIMACSbrand) top, edgepolishedwithundersupportof designer50mmMSpowdercoatedlegs undersupportwithprovisionforelectrical & data wiring. Legrand Power & Data ports inlaid to Corian top. Drawing No 11 in Site Plan and Drawings |
| 17 | Providing & Installation of CABINTABLE-1800Lx750Dx750Ht:Tabletopmadeof25mmthkPrelaminated Particleboard,with50mmMS powdercoatedlegsundersupportwith power & data raceway. Drawing No 12 in Site Plan and Drawings |
| 18 | Providing & Installation of SIDECREDENZA for Cabin table :1000Lx400Dx750Husing 18mm Prelam Particle board with combination of drawers & Openable shutters, Handle, lock, shelves provided. |
| 19 | Providing & Installation of RECEPTIONTABLE- 2500L x1000D x750Ht:Tabletopmadeof18mmACRYLIC soilidsurface(Corian/HIMACSbrand) top, edgepolishedwithundersupportof designer50mmMSpowdercoatedlegs undersupportwithprovisionforelectrical & data wiring. Legrand Power & Data ports inlaid to Corian top. as per Architect fdrawing and detail |
| 20 | Providing & Installation of longTable at cafetaria – Heavy pipe metal frame, powder coated with Granite top of size 2\"x 17\" in size as per Architect fdrawing and detai |
| 21 | Providing & Installation of long Table at cafetaria – Heavy pipe metal frame, powder coated with Granite top of size 2\"x 12.5\" in size as per Architect fdrawing and detai |
| 22 | B- GLASS CUBICALS & DRY WALL Providing & Fixing Of Glass Partition With Door :Providing & fixing of 10 mm clear toughened fixed glass with Aluminium slim profile & Patch Fittings for Door.Glass make : Saint Gobain 10mm clear toughened Color - Anodized Black Matt Finish,Door Hardware ( Dorma Aido with D - Handle 300mm), Ceiling Fabrication at the Ht 3mtr from FFL - M.S 50 x 50 x 2mm |
| 23 | Providing & Fixing Of Dry Partion Wall with Laminate finish:Providing & fixing of 100mm thk dry wall partion wall having 12mm thk cement board on each side of wall screwed to 50x50x3mm thk aluminium back supports membersfabricated at 600mm C/C , including Approved laminate will be fixed boath side of wall etc complete |
| 24 | C-ELECTRICAL WORK Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface PVC conduit( medium) with modular switch, modular plates,suitable size modular GI box of specified Category and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. |
| 25 | Wiring for group controlled light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface PVC conduit( medium)and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. |
| 26 | Supplying and fixing stepped type electronic fan regulator on the existing modularplate switch box including connections but excluding modular plate etc. as required\".(a) Cat A |
| 27 | Supplying and fixing following size modular GI box alongwithmodularbase and cover plate for modulator switchesin recess etc. as required.\"(a) 1 or 2 Module ( 75 mm x 75 mm) Cat A |
| 28 | \"Installation,earthing, testing and commissioning of ceiling fan including wiring the down rodof standard length ( upto 30 cm) with 1.5 sq .mm FRFRLS PVC insulated copper conductor single core cable etc. as required. |
| 29 | \"Supplying and fixing extra down rod of 20 cm length GI pipe 15 cm dia heavy gauge including painting etc as required |
| 30 | \"Supply and erecting\"J\" typeMild Steel fanhook fabricated out of 35 X 6 mm flat stripsuitable for rafters completewith coach screws etc as required.\"(c)For 8 inches rafter size |
| 31 | Supplying and fixing suitable size modular GI box with modular plate and coverin front on surface or in recess including providing and fixing 3 pin 5/6 Amodular socket outlet and5/ 6 Amodular switch connection painting etc. as required.(a) Cat A |
| 32 | Supplying and fixing suitable size modular GI box with modular plate and coverin front on surface or in recess including providing and fixing 6 pin 15/16 A and 5/6 A modular socket outlet modular socket outlet and15/16 Amodular switch connection painting etc. as required.\"(a) Cat A |
| 33 | Supplying and fixing call bell/ buzzer suitable forsingle phase 230 V complete as required.(a) Ding Dong Bell |
| 34 | Supplying and fixing following way SPN sheet steel MCB distribution board 240 V on surface/ recess complete with tinned copper busbar neutral busbar earth bar dinnbar detachable gland plate interconnections phosphotized and powder painted including earthing etc. as required ( but without MCB/RCCB/Isolator).(a) 4 way single door Cat A |
| 35 | Supplying and fixing following way TPN sheet steel, double door, Horizontal type MCB distribution board 415 V on surface/ recess complete with tinned copper busbar neutral busbar earth bar dinnbar detachable gland plate interconnections phosphotized and powder painted including earthing etc. as required ( but without MCB/ RCCB/Isolator)\"(c) 8 way (8+24), double door, Horizontal type Cat A |
| 36 | Supplying and fixing 40 A,C series MCB suitable for lighting and other loads of following poles in the existing MCB DB complete with connections testing and commissioning etc as required.(e) TPN, Cat A |
| 37 | Supplying and fixing 63 A,C series MCB suitable for lighting and other loads of following poles in the existing MCB DB complete with connections testing and commissioning etc as required.e) TPN, Cat A |
| 38 | Supplying and fixing 6 A to 32 A,C series MCB suitable for lighting and other loads of following poles in the existing MCB DB complete with connections testing and commissioning etc as required.\"(a) SP, Cat A |
| 39 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor single core cable in the independent surface PVC conduit ( medium)of appropriate size as required. |
| 40 | (a) 2 x 1.5 sq.mm + 1 x 1.5 sq.mm earthwire (20mm Conduit) |
| 41 | (b) 2 x 2.5 sq.mm + 1 x 2.5 sq.mm earthwire (20mm Conduit) |
| 42 | (c) 2 x 4 sq.mm + 1 x 4 sq.mm earthwire (20mm Conduit) |
| 43 | (j) 4 x 6 sq.mm + 2 x 6 sq.mm earthwire (32mm Conduit) |
| 44 | (k) 4 x 10 sq.mm + 2 x 10 sq.mm earthwire (32mm Conduit) |
| 45 | Supplying, installation and testing of suitable size modular GI box , modular plate and cover complete with RJ-45 connector(modular LAN socket TX1000/ CAT6) including concealed metal box/surface GI/PVC Box, modular plate, punching, identifying, complete as required. CAT A |
| 46 | Supplying, installation and testing of suitable size modular GI box , modular plate and cover complete with RJ-11 connector(modular telephone socket) including concealed metal box/surface GI/PVC Box, modular plate, punching, identifying, complete as required. CAT A |
| 47 | Supplying, installation and testing of suitable size modular GI box , modular plate and cover complete with modular TV socket including concealed metal box/surface GI/PVC Box, modular plate, punching, identifying, complete as required. CAT A |
| 48 | Supplying and drawing of Cat - 6 UTP, 4 pair annealed tinned copper conductor PVC insulated, PVC sheathed, unarmoured data cable in existing surface/recessed steel/PVC conduit of appropriate size including connection, etc. complete as required\"(a) Cat 6 |
| 49 | Supplying and drawing/fixing indoor type 0.5 sq.mm FR PVC insulated copper conductor unarmoured telephone cable ITD/DOT approved, with GI saddles on wal or in the existing surface/recesed steel/PVC conduit having folowing pair(s), complete as required.\"(a) 2 Pair |
| 50 | Supplying and drawing of Co-axial TV cable of required grade, solid copper conductor PE insulated, shielded with fine tinned copper braid and protected with PVC sheath in existing surface/recessed steel/PVC conduit of appropriate size including connection, etc. complete as required (b) RG-6 |
| 51 | \"Supplying and fixing of following sizes ofrigid PVC conduit alongwith accessories in surface(medium)/recess(heavy) includingcutting the wall and making good the same in case of recessed conduit as required. |
| 52 | \"(a) 20 mm |
| 53 | (b) 25 mm |
| 54 | Supply of3 1/2 core armoured PVC/XLPE insulated, PVC sheathed aluminium conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554(Part I) ,IS:7098(Part I) with latest amendments of following size.(4)3 1/2 Core 70 sq.mm |
| 55 | Supplying and making cable end terminations with brass compression gland and copper lugs for folowing sizes of 3 1/2 Core PVC insulated PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade, completeas required(4) 3 1/2x 70 Sq. mm. |
| 56 | Laying of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of size exceeding 25 sq.mm but not exceeding 120 sq.mm in the existing masonry open duct,etc.complete as required |
| 57 | Supplying and laying 25 mmx 5 mm GI strip at 0.5 m below ground as strip earth electrode including soldering etc. as required |
| 58 | Supply and erecting of 48 inch ( 1200mm sweep) ceiling fan, double ball bearing type, , complete with all accessories.\"(a) Cat A |
| 59 | Supply and erecting of 12 inch (300 mm sweep) exhaust fan with double ball bearings, 1400 rpm, complete with all accessories.(a) Cat A |
| 60 | Supplying, installing, testing and commissioning of Junction Box, ITD/DOT approved, indoor type with wall mounting/concealed facility having front door with lock along with aluminium frame for mounting disconnection type Krone modules, complete cabinet fabricated from 18 SWG CRCA sheet with powder coating in appropriate manner and suitable for following capacity of pairs, including Krone makemodules, crimping and terminations, etc. complete as required.(c) 50 Pair |
| 61 | Supplying and fixing 12U wall mount rack (Dimension-DxWxH – 500x600x635mm) as per specification No. WG-NAS/RAK |
| 62 | Supplying and fixing 24 port patch panel with tool-less keystone jacks in provided U Rack complete as per specification no. WG-NAS/PP |
| 63 | Supplying, installing and testing UTP connector (RJ-45) as per specification No.WG-NAS/UTPC. |
| 64 | Supplying and erecting 12-15W COB Recess Mounted Fixed Down Light ( Make : Philips- thin Trim deep Reccessed COB , Jaquar - LERS02R015XW or Equivalent to sameas per architecture requirement ) |
| 65 | Supplying and erecting 5-7W COB Recess Mounted FLEXI Beam Light ( Make : Philips- Flexi Beam Reccessed COB , Jaquar - LETS36R003XW or Equivalent to sameas per architecture requirement ) |
| 66 | Supplying and erecting 15-18W Slim Panel Light ( Make : Philips- Dura Slim, Jaquar - LARP01R018XW or Equivalent to sameas per architecture requirement ) |
| 67 | Supplying and erecting 10W Wall Light ( Make : Philips- Meraki-282109 or Equivalent to sameas per architecture requirement ) |
| 68 | Supplying and erecting 22W Slim Panel Light ( Make : Philips- Dura Slim, Jaquar - LSKL01S036XW or Equivalent to sameas per architecture requirement ) |
| 69 | Supplying and erecting 28W Pendent Light ( Make : Philips- lustre or Equivalent to sameas per architecture requirement ) |
| 70 | Supplying and erecting 28W LED strip Light - 5 mtr( Make : Philips- Linea Bright or Equivalent to sameas per architecture requirement ) |
| 71 | Supply and Fixing of 6M Pop-up Box with 2 NOS 5A SOCKET ,1 NOS 5A SWITCH and 1 Nos Data Socket |
| 72 | D-HVAC WORKSUPPLY OF DAIKIN VARIABLE REFREGERENT OF VOLUMES.a-OUTDOOR UNITSSupplying, erecting, testing and commissioning of 12HP, VRF/VRV air conditioning system outdoor unit (ODU) complies type-IV OEM standards working on HFC refrigerant R410A or other required/suitable green equivalent refrigerant, for minimum cooling capacity as delivering 100% capacity at 47° C, non stop cooling even at 56° C and coefficient of performance (COP) 3.00 to 4.00, modular type vertical hot air discharge suitable for longer piping range upto 1000m operation in cooling mode with inverter/digital VRF/VRV technology microprocessor based control compressor starter/control panel with scroll compressor, air cooled copper condenser coil of suitable shape for increasing maximum heat transfer area, rain protection cover, built in oil separator, accumulator and oil receiver, copper tube aluminium fin air cooled condenser, condenser fan with motor suitable for 415V±10%, 50 Hz, 3 phase power supply (all suitable for high ambient conditions), internal copper refrigerant piping, internal wiring and refrigerant, etc. all housed in powder coated weather proof cabinet complete. |
| 73 | b- INDOOR UNITSSupply, installation, testing and commissioning of VRF/VRV based ceiling suspended 4 Way cassette indoor unit (IDU) compact/standard size of nominal cooling capacity 0.6TR ( 420 cfm )/0.8TR ( 441 cfm ) having EER as per BEE standards and specifications, suitable as per site requirement with swing louvers and adjustable blades from sides. IDU with drainage arrangements, fan, refrigerant liquid and refrigerant piping, cordless remote control, and fresh air port etc. IDU shall have anti corrosive coating suitable for coastal area in all respects suitable to operate on 1-phase, 230V, 50Hz, AC supply complete. The unit consisting with any additional refrigerant and oil charge as per requirement during installation. |
| 74 | Supply, installation, testing and commissioning of VRF/VRV based ceiling suspended 4 Way cassette room/indoor unit (IDU-compact/standard size) of nominal cooling capacity 1.0TR ( 441 cfm ) to 1.3TR (512 cfm ) having EER as per BEE standards and specifications, suitable as per site requirement with swing louvers and adjustable blades from sides. IDU with drainage arrangements, fan, refrigerant liquid and refrigerant piping, cordless remote control, and fresh air port etc. IDU shall have anti corrosive coating suitable for coastal area in all respects suitable to operate on 1-phase, 230V, 50Hz, AC supply complete. The unit consisting with any additional refrigerant and oil charge as per requirement during installation. |
| 75 | Supply, installation, testing and commissioning of VRF/VRV based ceiling suspended 4 Way cassette room/indoor unit (IDU-compact/standard size) of nominal cooling capacity 1.5TR (512 cfm) to 1.8TR (618 cfm) having EER as per BEE standards and specifications, suitable as per site requirement with swing louvers and adjustable blades from sides. IDU with drainage arrangements, fan, refrigerant liquid and refrigerant piping, cordless remote control, and fresh air port etc. IDU shall have anti corrosive coating suitable for coastal area in all respects suitable to operate on 1-phase, 230V, 50Hz, AC supply complete. The unit consisting with any additional refrigerant and oil charge as per requirement during installation |
| 76 | Supply, installation, testing and commissioning of VRF/VRV based ceiling suspended 4 Way cassette room/indoor unit (IDU-compact / standard size) of nominal cooling capacity 2.6TR (918 cfm) to 2.8TR ( 1100 cfm ) having EER as per BEE standards and specifications, suitable as per site requirement with swing louvers and adjustable blades from sides. IDU with drainage arrangements, fan, refrigerant liquid and refrigerant piping, cordless remote control, and fresh air port etc. IDU shall have anti corrosive coating suitable for coastal area in all respects suitable to operate on 1-phase, 230V, 50Hz, AC supply complete. The unit consisting with any additional refrigerant and oil charge as per requirement during installation |
| 77 | Supply, installation, testing and commissioning of VRF/VRV based ceiling suspended 4 Way cassette room/indoor unit (IDU-compact / standard size) of nominal cooling capacity 3.0TR (1100 cfm) to 3.2TR (1165 cfm) having EER as per BEE standards and specifications, suitable as per site requirement with swing louvers and adjustable blades from sides. IDU with drainage arrangements, fan, refrigerant liquid and refrigerant piping, cordless remote control, and fresh air port etc. IDU shall have anti corrosive coating suitable for coastal area in all respects suitable to operate on 1-phase, 230V, 50Hz, AC supply complete. The unit consisting with any additional refrigerant and oil charge as per requirement during installation |
| 78 | Supply, installation, testing and commissioning of VRF/VRV based ceiling suspended 4 Way cassette room/indoor unit (IDU-compact / standard size) of nominal cooling capacity 4.1TR (1218 cfm) to 5.0TR (1624 cfm)of suitable cfm having EER as per BEE standards and specifications, suitable as per site requirement with swing louvers and adjustable blades from sides. IDU with drainage arrangements, fan, refrigerant liquid and refrigerant piping, cordless remote control, and fresh air port etc. IDU shall have anti corrosive coating suitable for coastal area in all respects suitable to operate on 1-phase, 230V, 50Hz, AC supply complete. The unit consisting with any additional refrigerant and oil charge as per requirement during installation. |
| 79 | Supply, installation, testing and commissioning of VRF/VRV based Hi-wall type room/indoor unit (IDU) of nominal cooling capacity 1.0TR (358 cfm) to 1.25TR (417 cfm) having EER as per BEE standards and specifications with multiple speed evaporator fan with motor, copper tube aluminium fin evaporator coil, washable air filter, insulated drain tray, in built drain pump, expansion device, cordless remote control with necessary controls and electrical terminal to receive power supply, etc. IDU shall have anti-corrosive coating suitable for coastal area. Unit shall be of decorative slim dimension suitable indoor wall mounting. The indoor unit shall also have an electronic control console. The unit shall be suitable for wall mounting and provided with suitable mounting brackets with any additional refrigerant and oil charge as per requirement during installation complete. |
| 80 | Supplying and erecting circular flexible/rigid PVC pipe duct of size 40mm dia, 4mm thickness with required couplers, reducers, T-joints, Y-joints elbows and necessary supports etc. with sealing with provided control/air flow regulating valves/dampers, filters at position complete |
| 81 | supplying, laying/fixing, testing and commissioning of appropriate nominal refrigerant copper pipe of 19.1mm dia (OD) for liquid line/suction line supply and return piping of suitable gauge (hard copper pipe for liquid main line and soft copper pipe for refrigerant) along with necessary supports, hangers, clamps, vibration isolators and fittings such as bends, tees, valves, gauges, strainers with insulation of 19 mm thick elastomeric nitrile rubber along with application of multicoating of VRV/VRF piping for protection against mechanical damages, fungal growth, flame spread, water permeance and ultraviolet radiations with OEM standards of VRV/VRF air conditioning system complete |
| 82 | E- MISC WORK PIN -UP BOARDS (SOFTBOARDS)Supply and installing in position soft display board having aluminum frame including 12mm thick soft board with blazer cloth top fixed in frame with clip fitting with all stainless steel hardwares and easy fixing to the wall. All material shall be of approved make. All works complete as per the drawing / Image, specification and direction of the Engineer. SIZE - 1000mm (L) X 350mm (HT) |
| 83 | Providing and fixing Vinyl flooring of approved shade and design with adhesive complete. |
| 84 | VERTICAL BLINDSProviding & fixing in position vertical blinds 100 mm wide approved blackout fabric and of approved make, colour with head rail of 25mm height and 47mm wide extruded high strength anodised aluminium alloy section. End control unit state of art reduction ratio of 3:5:1 for a very smooth operation of the blind. It shall include all necessary fittings and fixtures like tilt rod, tilter chain , carrier/ runner, spacers, installation bracket, cord weight, cord, bottom mechanism consisting of weight and chain etc. complete. All material shall be of approved make. All works complete as per the drawing, technical specification and direction of the Engineer. |
| 85 | MAGNETIC WHITE MARKER BOARD(SIZE : 2400mm(L) x 1200mm(HT)Providing and fixing in position approved Magnetic white matt finish marker board of (SIZE - 2400 X 1200 ) having Moulded Anodized Aluminium frame & stain resistant porcelain coated 28 gauge steel backing with Virgin ABS (Acryloniprile Butadiene Styrene) Molded 300x100mmm Chalk tray and Eraser complete, including all accessories. All material shall be of approved make. All works complete as per the drawing./ Image, specification and direction of the Engineer. |
| 86 | NOTICE BOARD(SIZE: 1200mm (L) x 900mm (HT) Providing and fixing in position Notice board of size 1200mm(L) X 900(HT) mm made of Aluminium frame withAcrylic shutter including 12mm thick soft board with blazer cloth top fixed in frame with clip fitting with all stainless steel hardwares such as screws, locking arrangement etc. and making arrangement for fixing on wall all complete as per design. All material shall be of approved make. All works complete as per the drawing./ Image, specification and direction of the Engineer. |
