|
| 1 | COMPUTER TABLE |
| 2 | Providing and fixing at site 800 mm deep computer table to be made up of 19 mm. BWP ply (710) the rear partition is to be covered with 12.0mm thick ply. height of the desk will be 750mm & width will be as per room size, are to be finished with approved shade of 1.0mm thick laminated decorative finish on all the sides, all the exposed edges to have 1mm thick laminate beandings, to be finished with approved shade of melamine polish, the cost shall include all materials, labour, all accessories, such as handles, catchers, etc.All complete as per the drawing & directions of Engineer-in-charge. |
| 3 | FALSE CEILING |
| 4 | Providing and fixing of false ceiling with powder coated exposed aluminium suspension system with mid span deflection not exceeding 1/360span with hanger spacing of1200mmc/c) consisting of Main Runner 3600mm long,CrossTee1200mm/600mm long and Wall Angle. The Wall Angle shall be fixed on PVC Dash Fasteners on the per meter of the wall by steel screws with distance 300mmc/c. Grid of module size 600mmX600mm shall be supported by G.I wire from purlins / soffit. All complete as per the drawing & directions of Engineer-in-charge. a) Gypsum Plaster Board of12.5mm thick |
| 5 | Wall Panelling |
| 6 | Wall panelling with 15mm thick OW Acoustic Board fitted to aluminium channel of 55mmx50mm placed at 300mmc/c in horizontal direction and metal stand 55 mmx48mm placed @900mmc/c in vertical direction connected with G.I connecting clips with aluminium channel by machine screws. The boards are to be joined with jointing compound and fibre tape and finished with top coat etc. the rate includes the cost of all materials, labour charges including scaffolding etc. 15mm thick OW Acoustic Board (Mineral Fibre Acoustic Tiles) of approved pattern complete as per direction of the Engineer-in-charge. |
| 7 | FILE CABINAT |
| 8 | Providing and fixing file cabinet at top of the every lab table to be made up of 19 mm. BWP ply (710) the rear partition is to be covered with 6.0mm thick ply. height of the desk will be 450mm & width will be as per room size, are to be finished with approved shade of 1.0mm thick laminated finish on all the sides, all the exposed edges to have 1mm thick laminate beadings, to be finished with approved shade of melamine polish, the cost shall include all materials, labour, all accessories, such as handles, catchers |
| 9 | VERTICAL BLINDS |
| 10 | Providing and fixing at site 100mm wide vertical blinds of approved shade & pattern etc complete.6’x6’ |
| 11 | FLOOR MAT |
| 12 | Providing and fixing 3.5mm vinyl floor mat at floor. |
| 13 | ALUMINIUM DOOR- |
| 14 | Providing and fixing aluminium glass door at the entry gate and side lab gate with galvanised aluminium frame and ACP board. Half of the door will be cover with 8mm glass. |
| 15 | ALUMINIUM WINDOW- |
| 16 | Repairing the existing aluminium sliding window with new wheel, glass and rubber. |
| 17 | ELECTRICAL WORK- |
| 18 | Electrical installation work at computer table and lighting arrangement at false ceiling by 2x2 led light set. Including 2 no Ac starter point. |
| 19 | SITTENG BENCH |
| 20 | Supply and fitting Godrej Décor 3 seater visitor reception silver finish heavy duty iron chair with cushion. [177 W x 67W x79H ]cm |
| 21 | REVOLVING CHAIR |
| 22 | Providing and Fitting Godrej interio Vurv Mid black Fabric, poly propylene office arm chair [depth- 75.6cm, width 75.6 cm, height 98.5 cm] |
| 23 | WODEN PLATFORM |
| 24 | Construction of 8’X 6’ wooden platform with colour inside the room. |
