Tender For Very Urgent Civil Maintenance Works In Rest House And Power House Of Gandhisagar Hps, MANDSAUR-Madhya Pradesh

Very Urgent Civil Maintenance Works In Rest House And Power House Of Gandhisagar Hps-14.73 Repair to plaster of thickness 12mm to 20 mm in patches of area 2.5 sqm and under, including cutting the patch in proper shape, raking out joints and preparing plastering the wall surface with white cement based polymer modified self curing mortar, including disposal of rubbish, all complete as per the direction of Engineer-In-Charge. 17.76 Providing and fixing CP brass Urinalspreader of approved quality and make 11.18.2 Chequered precast cement concrete tiles any finish, any size 22 mm thick IS:13810-1993 ISI mark in footpath and courtyard jointed with neat cement slurry mixed with pigment to match the shade of tiles, 15mm thick screed bad in cement mortar 1:6 complete all as specified and directed by Engineerin- Charge.Medium shade pigment using 50% white cement 50% Grey cement. 17.22.1 Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete. 10 litre capacity 18.6.2.2 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings 20 mm nominal outer dia .Pipes. 18.6.2.4 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings 32mm nominal outer dia .Pipes. 18.34 Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS: 8931. 15 mm nominal bore 15.11.1 Dismantling tile/ Kota stone/ Marble / Granite work in floors/walls and roofs laid in cement mortar including stacking material within 50 metres lead. For thickness of tiles 10 mm to 25 mm. 14.27 Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete 10 13.38 Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete 11 12.58.2.3 Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating12.5mm thick moisture resistant gypsum plasterboards Moistbloc as per BS EN 520 confirming to water absorption class H1 with total water absorption < 5%, Green Pro certified by CII 12 11.53 Providing and laying Antiskid floor tiles of any sizes, 12 mm thickness with water absorption less than 0.08% and conforming to IS:15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 sand) including grouting the joints with white cement with matching pigments etc., complete. 13 11.52 Providing and laying rectified Glazed Ceramic wall tiles 300x450 mm or more (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in all colours white, ivory, grey, fume red brown laid on 12 mm thick cement mortar 1:3 (1 Cement : 3 sand)including grouting the joints with white cement and matching pigments etc., complete. 14 13.46 Wall painting by any mechanical or manual means with plastic emulsion paint of approved brand and manufacture to give an even shade: Two or more coats on new work 15 21.3.3 Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber/ neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge. (Cost of aluminium snap beading shall be paid in basic item) :With float glass panes of 8 mm thickness (weight not less than 20 kg/sqm ). 16 11.22.2 Providing and fixing 18mm thick gang saw cut mirror polished (premoulded and prepolished) machine cut for kitchen platforms, vanity counters, window sills , facias and similar locations of required size of approved shade, colour and texture laid over 20mm thick base cement mortar 1:4 Granite fine grained dark crystal of other colours and various patterns 17 18.31 Providing and fixing C.P. brass bib cock of approved quality conforming to IS: 8931, 15 mm nominal bore. 18 25.37 Providing and fixing in position best Indian Health Faucet with 8mm dia 1 meter long Flexible Tube and wall bracket with N. R. V. (non-return wall).(Premium Range Sanitary Ware) 19 17.27 Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350mm. 20 17.70.1 Providing and fixing toilet paper holder: C.P. brass 21 17.73.1 Providing and fixing CP brass towel rail of approved quality and make 600x20mm 22 19.4.1 Providing and laying below ground unplasticised PVC pipe to with stand working pressure of 4 kg/cm2 soild waste pipes confirming to IS:13592 and IS:4985 including jointing with seal ring confirming to IS :5282 110 mm diameter OD (min. wall thickness 3.2mm) 23 9.66.1 Providing and fixing ISI marked stainless steel tower bolt black finish, (Barrel type) with necessary screws etc. complete : 250x10 mm 24 9.65.1 Providing and fixing ISI marked stainless steel sliding door bolts with nuts and screws etc. complete 300x16 mm 25 9.68.2 Providing and fixing ISI marked stainless steel door latches with screws etc. complete 250x20x6 mm 26 9.69.2 Providing and fixing ISI marked stainless steel handles with necessary screws etc. complete : 100 mm 27 9.109.2 Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete: 250x16 mm 28 17.2.1 Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required :W.C. pan with ISI marked white solid plastic seat and lid 29 17.77 Providing and fixing C.P. brass soap container 109 mm wide, 125 high and 112 mm distance from wall of standard shape with bracket of the same material with all fittings etc. of approved quality and conforming to IS: specification. 30 17.81 Providing and fixing PTMT liquid soap container 109mm wide, 125mm high and 112mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour. Weighing not less than 105 gms 31 2.3 Clearing grass and removal of the rubbish up to a distance of 50 m outside the periphery of the area cleared. 32 9.89 Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete. 33 Base rate Removal of debries and concrete waste materials from Turbine floor and throwing it outside premises of Power house as per direction of Engineer Incharge

Refer document

Refer document

INR 1.97 Lakhs /-