Purchase Building Material - Construction Of Tin Shed Cc Block In Village Chat Regran Crematorium - 1 Earth Work In Cutting, Lifting 1-5 Meter And 50 Meter Execution And Applying Dog Weight, Cambering In Well, Applying Grade And Leveling And Dressing Of , Ajmer-Rajasthan

Purchase Building Material - Construction of tin shed CC block in village Chat Regran crematorium - 1 Earth work in cutting, lifting 1-5 meter and 50 meter execution and applying dog weight, cambering in well, applying grade and leveling and dressing of executed soil. item.po. 127 81 2 Putting of excavated soil upto km. distance (item no.186 a,) 3 Put cement concrete 15:10 mixture under floor in which 1 cement 5 gravel 10 parts 40 pm. Mixing with broken stone ballast from focal crusher, crushing and pressing, mixing by hand including tamping etc. item.no.9 a 4 Put cement concrete 1 cement 2 gravel stone aggregate in ratio with 12 mm focal size aggregate. item no.16 5 C.C. For road, levelling of hard and flat surface with 25 mm gravel, supply and laying of 20 mm thick M-30 cetacean concrete interlocking block and filling of joints with sand, edge block free PJMU no.1466 Excavating soil upto 1.5 depth in ditch, trench, drain, tamping the bottom, pouring water, beautifying the bed, taking out the excavated soil, filling the trenches with soil again after filling the foundation and disposing of the formed soil upto a distance of 50 meters. 20 In cement concrete NVPA firm, stone soil (crusher broken)/brick soil of nominal size of 40 mm, filling and crushing in cement sand mixture in the ratio of cement : 4 sand : 8 ballast, including tamping. 10 Stone walling in foundation and plinth in cement-gravel mass including closing of side cracks and tamping etc. 296 Cement concrete in the ratio of 1 cement : 2 gravel 4 par aggregate with 12 mm nominal size aggregate, ramming and tamping etc. 16 Cement plaster on wall with cement-gravel mixture in the ratio of 1:6 including scraping of joints and regular tamping for 14 days. 776 Supply and installation of steel corrugated boards of 0.80 mm thickness (22 gauge) with steel J or L hooks and bolts and nuts of 1 mm diameter, bitumen washers. Complete work. Cost of scissors and purlins is not included. 54 Iron work in gates/fasteners etc. which includes cutting, mounting and fitting of flat cornices, Tees and corrugated (chainet) etc. 63 6 pairs % contingency

Refer document

Refer document

INR 6 Lakhs /-