Tender For Additional Work Of Construction Of Food Craft Institute At Baran - 1 Making Opening in masonry wall including dismantling, fixing lintel / beam and making good the damages to wall and floor complete to match the existing surface including proping the existing structure above the opening excluding cost of lintel / beam etc. 2 Add extra item No. 13.15 for fixing of door / window frames (Chowkhats or steel windows) in the opening including fixing hold fast in cement concrete 1 : 3 : 6 (1 cement : 3 coarse sand : 6 stone grit 20 mm nominal grade) excluding the cost of frame or steel windows. 3 Surface dressing of the ground including removing vegetation and inequalities not exceeding 15cm deep and disposal of rubbish lead upto 50 Mtr. and lift upto 1.5 Mtr. : 4 All kind of soil. 5 Earth work in excavation in foundation trenches or drains including dressing of sides and ramming of bottoms, lift upto 1.5 Mtr. including taking out the excavated soil and depositing and refilling of jhiri with watering and ramming and disposal of surplus excavated soil as directed within a lead of 50 Mtr. 6 All kinds of soil 7 Add extra over item no. 1.8 and 1.9 for every additional lift of 1.5 m or part thereof : 8 In all kind of soils. 9 Carrige of Earth,Sand ,line morrum,manure or sludge upto 1 K.m. 10 Filling available excavated earth (excluding rock) in trenches, plinth side of foundation etc. in layers not exceeding 20 cm. in depth , consolidatingeach deposited layer by ramming and watering including lead upto 50Mtr. and lift upto 1.5Mtr. 11 Filling in plinth with locally available sand under floors including watering ramming consolidating and dressing complete including cost of sand. 12 Providing and laying in position cement concrete including curing compaction etc. of specified grade excluding the cost of centering and shuttering =All up to plinth level (Excluding Cost of Cement). 13 1 : 3 : 6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size). 14 Providing&fixingprecastcementconcretecoping1:2:4mix50mmthickcompleteas per specification : 15 Centering and shuttering with plywood or steel sheets including strutting, propping, bracing both ways and removal of formwork for foundations in basements rafts, footings, strap beams, bases of columns , etc. up to plinth level. 16 Suspended floors, roofs, landings, staircases, balconies, girders, cantilevers, bands , coping, bed plates, anchor blocks, sills, chhajjas lintel, beam etc. 17 Columns, pillars, posts and struts etc. 18 Providing and fabricating reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding (including cost of binding wire) all complete up to floor three level. 19 Thermo Mechanically treated bars 20 Reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. up to floor three level including curing, compaction, finishing with rendering in cement sand mortar 1 : 3 (1 cement : 3 coarse sand) and making good the joints excluding cost of centering shuttering and reinforcement : (Excluding Cost of Cement)All works upto floor V floor 21 1 : 1.5 : 3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size). 22 Providing and fixing Aluminium sheet 3.15 mm thick and 150 mm. Wide over expansion joint with fixing rowl plug and aluminium screws as per designs to match the colour shade of the distemper or wall treatment. 23 Flyash Brick masonry in Super Structure upto Third Story with Flyash Bricks of class designation 75 in : 24 Cement mortar 1 : 6 (1 cement : 6 coarse sand) 25 Half Flyash brick masonry in foundation & plinth using bricks of designation 75 in : 26 Cement mortar 1 : 4 (1 cement : 4 coarse sand). 27 Random Rubble stone masonry for foundation and plinth in Cement Sand mortar above 30CM thick wall in: 28 Cement Mortar 1:6 ( 1-Cement : 6-Sand). 29 Providing and fixing Granite stone slab mirror polished and machine edge cut in walls, pillars, steps, Shelves, Sills Counters, Floors etc. laid on 12mm (Av.) thick base of cement mortar 1:3 (1 cement : 3 coarse sand) jointing with white cement mortar 1:2 (1 white cement: 2 marble dust) with pigment to match the shade of the granite slab complete including rubbing and polishing of : Green / Black / Other granite 1501 Cm2 to 3600 Cm2 Tiles 30 Green / Black / Other granite 1501 Cm2 to 3600 Cm2 Tiles 31 Extra for providing edge moulding to18 mm thick marble stone counters, vantities etc. over item No. 7.1 & 7.2 including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. 32 Granite work. 33 Extra for providing opening of required size & shape for wash basin / kitchen sink in kitchen platform, vanit counters and similar location in marble / stone work including necessary holes for pillars taps etc. including rubbing and polishing of cut edge etc. complete. 34 Providing and fixing Ist quality standard White Ivory Glazed Tiles ISI marked [IS:13753] of size 300mm x 200mm in walls, floors, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in white cement mixed with pigment to match the shade of tile complete (excluding the cost of cement plaster). 35 Category-I : Kajariya, Jhonson, Orient, Somani make etc. 36 Providing and fixing external grade board solid core single leaf flush door shutters ISI 2202-67 marked using Phenol formal, dehydreresin in glue both sides with approved steel fittings complete as per Annexure ‘A’( Century, Greenply, National, Golden or Equivelent make ) 37 Commercial Veneer both side: 35 mm thick shutter 38 For External teak wood lipping on flush door: 35 mm x6 mm 39 Extra for cutting rebate in flush door shutters (Total area of the shutter to be measured). 40 Providing Double leaf shutter instead of singal leaf. 41 Providing and fixing Anodised Aluminium Curtain rod with Aluminium brackets complete :20 mm dia. 42 Providing and fixing pressed steel mitred door frames manufactured from commercial mild steel sheet of 1.25 mm (16 gauge) thickness including hinges jamb, lock jamb, head and if required angle threshold of mild steel angle of section 50x25mm, or base ties of 1.25 mm pressed mild steel welded or rigidly fixed together by mechanical means, adjustable lugs with split end tail to each jamb including steel butt hinges 2.5 mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-charge. 43 Profile C 44 Providing and fixing steel glazed window frame made out of 80 x 40 mm hollow sheet section of 16 gauge thickness, joint mitred welded and grinded including hold fast of steel lugs 13 mm x 3 mm and 15 Cm long embedded in C C block 15 x 10 x 10 Cm of 1 : 3 : 6 nominal concrete and including fixing of pivoted hinges of superior quality, window shutters made out of 55 x 20 mm hollow steel section 15 mm paitam of 18 gauge thickness, joint mitred and grinded including 10 mm x 10 mm square bars welded to frame for paitam fixing float glass 4 mm thick panes with glazing clips and metal sash putty and fixing of shutters frames, peg stay, U shape handle 100 mm long, tower bolts 100 mm long of steel powder coated superior quality including fixing and jointing with frame hinges priming coat with steel primer complete in all respect as per direction of Engineer-in-charge. 45 Window fixed. 46 Window openable. 47 Supplying and fixing fixed wire gauge of 14 mesh x 24 gauge to the metal frame of rolled section by metal beading 20 x 3 mm with suitable screw at not exceeding 150 mm distance. 48 Providing batta (gola) 75mm x 75mm in cement concrete (1:2:4) including finished with cement mortar 1:3 as per standard design. 49 Making khurras 450 x 450mm with average minimum thickness 50 mm cement concrete 1:2:4 over P.V.C. Sheet 1 Mtr. x 1 Mtr. x 40 micron finished with 12 mm cement plaster 1:3 and one coat of neat cement, rounding edges and making and finishing the out let complete. 50 Polished Blue Kota Stone flooring skirting, laid over 20 mm thick base of C.M. 1:4 and jointed with grey cement slurry to match the shade of the slab including rubbing and polishing complete : 51 For area of each slab up to 2001 to 5000Sq. Cm :25 mm thick slab. 52 Polished Blue Kota Stone slab in steps, walls, pillars having fine machine cut edges laid on 12mm (Av.) thick cement mortar 1:3 and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete : 53 30 mm thick slab area upto 2001 to 5000 Sq.Cm. 54 Random rubble dry stone Kharanja under floor. 55 Plaster on new surface on walls in cement sand mortar 1:6 including racking of joint etc. complete fine finished: 20 mm thick. 56 6mm cement plaster to ceiling of mix 1:3 (1 Cement : 3 fine sand) 57 Making grooves as per design in plaster 10mm to 20mm wide. 58 Grading roof water proofing treatment with : 59 Cement concrete 1 : 2 : 4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size). 60 Applying Birla / JK white cement based putty over cement plaster surface for making even surface 61 Pointing on stone masonry in cement sand mortar 1 : 3 (1 cement : 3 sand) : 62 Raised & cut pointing. 63 Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade: 64 Two or more coats on new work including preparation of base with primer, putty, lippy complete in all respect. 65 Painting with Acrylic Exterier Paint Birla/Nerolac/Asian/Berger of Equivelant of approved brand to give and even shade with all scaffolding two or more coat on new work after cleaning of existing surface complete in all respect. As per direction of Engineer in charge. 66 Applying Priming Coat Withready mix pink or gray primer of approved brand and manufacture on wood work hard and soft wood. 67 Painting with enamel paint of approved brand and manufacture to give an even shade: 68 Two or more coats on new work. 69 Supplying and providing of two components poly sulphide sealant containing solid contents, confirming to standard specification and approved compatible primer, for priming vertical faces prior to application of poly sulphide sealant including all labour charges for sealing of expansion joints after drill mixing of two components sealing compound. Cleaning and preparation of expansion joint using wire brush sand papering with emery paper and filing with suitable mechanical means. The work includes racking and cleaning of joints, sticking, debonding tape on bottom of joint, applying primer on edges, using masking tape on edges, providing of sealant and removal of masking tape immediately after providing sealant in joint. 70 To joints in flooring, as per drawing with first layer of poly sulphide sealant in size 20 mm width and 10 mm depth over PE Foam and then providing polyethylene foam back up rod 25 mm dia size and finally providing another layer of poly sulphide sealant in size 20 mm width and 10 mm depth over P.E. back up rod as per application procedure and direction of Engineer-in-charge. 71 Providing and laying APP (Atactic Polypropylene Polymer) modified prefabricated five layer, 3 mm thick water proofing membrane, black finished reinforced with non-woven polyester matt manufactured by Bitumat Co. Ltd., Soprema, General Membranes or Tamko consisting of a coat of bitumen primer for bitumen membrane @ 0.40 Ltr./sq.mt. by the same membrane manufactured of density at 25°C, 0.87-0.89 kg./ltr. and viscosity 70-160 cps. Over the primer coat the layer of membrane shall be laid using Butane Torch and sealing all joints etc. and preparing the surface complete. The vital physical and chemical parameters of the membrane shall be as under : - 72 Joint strength in longitudinal and transverse direction at 23°C as 650/450 N/5 cm. Tear strength in longitudinal and transverse direction as 300/250 N. Softening point of membrane not less than 150°C, Cold flexibility shall be upto - 2°C when tested in accordance with ASTM, D-5147. The laying of membrane shall be got done through the authorized applicator of the manufactur of membrane.3 mm thick 73 Extra for covering top of membrane with Geotextile, 120 gsm non woven, 100% polyester of thickness 1 to 1.25 mm bonded to the membrane with intermittent touch by heating the membrane by Butane Torch as per manufactures recommendation [ for Item No. 15.53 to 15.55 ]. 74 Providing & fixing anodizing alumium work (Anodizing to be got done from approved Anodizer) for doors, windows, ventilators and partition with extruded built up standard tubular and other sections of approved make confirming to IS : 733 and IS : 1285 anodised transparent 81 dyed to required shade according to IS : 1868 (Minimum anodic coating of grade AC 15), fixed with rawl plugs and screws or with fixing clips or with expansion hold fasteners including necessary filling up of gas at junctions, at top, bottom and sides with required PVC/neoprene felt etc. Aluminium section shall be smooth, rust free, straight, mitred and jointed mechanically wherever required inlcuding cleat angle Aluminum snap beading for glazing/paneling, C.P. Brass/ Stainless Steel screws, Al. Tower bolt & Al. handle & Al. Aldrop etc. all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing and peneling to be paid for separately). 75 For shutters builtup standard tubular sections of openable doors ,windows & ventilators including providing & fixing hinges / rollers etc. and making provision for fixing of fittings wherever required (lockes shall be paid for separately). 76 Polyester Powder coating aluminum( minimum thickness of powder coating 50 micron) 77 Providing and fixing glazing in aluminium door, window, vintilator shutters and partitions etc. with PVS/ neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge (Cost. of aluminium snap beading shall be paid in basic item.) 78 with glass panes of 5.0mm thickness (weight not less than 13.75 Kg/Sqm) as per IS : 2835 79 Providing and fixing steel gate grating and grills made of angles, tees, square bars or other flats black pipe with holdfast and fittings complete as per design and drawing including cutting welding and fabrication with priming coat of red oxide. For Scetion Windows 80 Add extra if square, rectangular hollow tubular sections are used. 81 Providing and fixing M.S. sheetsingle leaf door shutter in angle iron frame 35x35x5mm suitabilly diagonally braced with 25x3mm flat iron above and below lock rail of size 50x5mm beading extra including all fittings, as per direction of Engg. incharge but excluding cost of chowkhats: including two coats of anit-corrosive red oxide primer paint 82 M.S. Sheet 20 S.W.G. 83 Providing and fixing welded mesh / expanded metal mesh in frame work, flat iron beading 20 x 3 mm including top cross laps inside and out sides welding, iron bolts, screws, clips etc. complete (excluding frame work) of size. 84 Welded mesh 25 x 25 mm x 16 gauge. 85 Add extra for mirror polishing on marble work / stone work where ever required to give high gloss finish complete. 86 P&F rigid PVC Pipe (IS:4985 mark) class II(4 Kg. /Cm.) approved quality /makeincluding joining the pipe with solvent cement rubber ring and lubricant 87 110 mm dia 88 P&F rigid PVC pipe fittings (IS: 4985 mark) of approved quality /make including joining the pipe with solvent cement rubber ring and lubricant: 89 Coupler (socket) 90 110mm dia 91 Bend 87 .5 92 110mm dia 93 Pipe Clip 94 110mm dia 95 Providing & Fixing of PVC Sheet Plate (2 mm Thick) With Vinayal sheeting (0.1 mm Approx) with Letter cuttings in any Required Shade colour Including transportation ,Nails ectCompletely of any size decided by EIC 96 foor all rooms 97 P & F kitchen & Lab Sink of approved make with C.I. brackets duly painted, 40 mm C.P. waste coupling, C.P. Brass chain with rubber plug, 40 mm G.I. waste pipe up to floor level complete including cutting and making good the wall & floor : 98 37 x 18 x 7 17x15x7 (with drain board) 99 P & F Bottle Trap of approved make 100 C.P Brass 40 mm 101 P&F waste coupling with fitting of approved quality/ make : 102 C.P Brass 40 mm 103 P & F G.I. Pipes (External Work) with G.I. fittings excluding union (IS : 1239 Mark) including trenching & refilling earth etc. 104 32mm dia nominal bore 105 B Class 106 Making connection of G.I. distribution branch with G.I. main including all fitting. 107 Beyond 25mm & upto 100mm dia 108 Supplying & installation of submerssible motor pump set ISI marked(IS : 8034-1989) Of approved make with required accessories including making connection suitable for TW/DCB/Open well.The job include lowering or riser pipesGI/HDPE pipes with rope cable & installation of complete fitting & accessories joning of electrical cable upto switch board all labour for testing of subermmisible pumps to watch the supply of water mains complete in all respect. 109 150mm diameter submersible pump shall have following HP rating,phase,Head,Minimum Discharge respectively.10H.P.,3-dia.,(93-200)Mtr,(240-60) LPM 110 Providing laying ISI marked P.V.C. insulated submarsible cable confirming to IS:694 with flexible coppr conductor including making connection etc. as required; 10 Sqm 3 core flat 111 Supply and fixing of starter panel for following rating motors made out with MS powder coated sheet housing ,protection relays for over load ,short circuit and single phasing ,ON/OFF buttons etc. complete in all respectStar delta starter 112 P & F G.I. Pipes (Internal work) with G.I. fittings (IS:1239 Mark) & M.S. clamps including cutting and making good the walls and floors : 113 Concealed pipe in wall including painting with anticorrosive bitumen paint 114 15mm dia nominal bore 115 B Class 116 Swan neck pillar cock 15 mm nominal size 117 Long body Bib Cock 15 mm nominal size
