Tender For Special Repairs To Building No P-106 At Ramnad Under Ge Tirunelveli(Tender Id:2025_Mes_ 697977_2); 1 Dismantling of floor hearth or wall tiling including cement mortar bedding but not backing and rubbish off the premises complete allas directed. 2 Material and labour vitrified ceramic tiles 10mm thick (Square/rectangular) area of each tile not exceeding 0.36 sqmin floorsset and jointed in neat cement slurry and pointed in white or coloured cement to matchincluding screed bed or bedding layer of mortar 15 mm thick in CM 1:6complete all as specified. 3 All as per item no 02 above but in vertical surfaces including backing coat of 10mm thick in CM 1:4on brick walls for skirting/DADO complete all as specified and as directed. 4 Material and labour Non Skid coloured ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18sqm in floors etc. set and jointed in neat cement slurryand pointed in white or coloured cement to match including 15 mm thick screed bed in CM 1:6 in floors etc complete all as specified and as directed. 5 Material and labour for 450x350x7mm thick glazed coloured ceramic tiles in vertical surfaces set and jointed in neat cement slurry pointed in coloured cement to match over backing coat of 10mm thick in CM 1:4complete all as specified and directed. 6 Material and labour Machine cutpre polished kota stone slab flooring 20-25mm thick over cement screedbase15mm thick in CM 1:6laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed. 7 Material and labour kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed including backing coat of 10mm thick in CM 1:4on brick walls for skirting/DADO complete all as specified and as directed. 8 Supply and fixing 15mm Unplasticised PVC pipes of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc.,with all fittings including taking down old existing pipe complete all as specified and as directed. 9 Supply and fixing 20mm Unplasticised PVC pipes of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc.,with all fittings including taking down old existing pipe complete all as specified and as directed. 10 Supply and fixing in repair vitreous China wash down water closet pan (pedestal pattern) white, incl. P or Strap, connection to drain and flushing pipe including seat cover for pedestal pan complete all as specified and as directed. 11 Supply and fixing in repairs vitreous China wash basin white, flat back, size 550X400 mm including cutting for pinning in ends of brackets, complete all as specified and as directed. 12 Supply and fixing in repairs 10 litre capacity PVC low level flushing cisternwith all accessories complete fixed with WC including syphonic pipe, PVC flushing pipe of size 32mm dia complete all as specified and directed. 13 Supply and fixing in repairs 15mm dia bore stop cock/angle cock, cast fancy type chromium plated screwed down high pressure, with crutch or butterfly handle screwed both ends for iron pipe on for unions and fixed complete all as specified and as directed. 14 Supply and fixingPVC connection 15mm dia and 450mm long with PTMT nuts complete all as directed. 15 Supply and fixing in repairs CP brass chromium plated shower rose 125 mm size fixed to 15mm pipe of revolving type complete all as specified and as directed. 16 Supply and fixing as in repair grating square 100mm size of PTMT(minimum 100 gms) complete all as specified and as directed. 17 Supply and fixing in repairsbib taps fancy type 15mm dia bore, chromium plated,with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed all as specified and as directed. 18 Supply and fixing in repairs pillar taps, fancy type 15mm dia bore, chromium plated, screwed down high pressure, with or without lettered `Hot or `Cold with long screwed shanks and fly-nuts, screwed for iron pipe complete all as specified and directed. 19 Supply and fixing in repairs 5.50mm thick of size600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed. 20 Material and labour in repair 75 mm dia PVC(SWR) floor trap with grating including jointing with solvent cement complete all as specified and directed. 21 Material and labour in repair 110mm dia PVC(SWR) gully trap setting and hoisting with solvent cement complete all as specified and directed. 22 Supply and fixing rotational moulded polyethylene water storage tanks 500 ltrs capacity (White colour), three layer (cylindrical or vertical with closed top) hoisted and fixed in position, including dismantling the existing one and removing to MES store yard, including dismantling water tanks complete all as specified and as directed. 23 Supply and fixing in repair for 20 mm dia bore Ball brass valves, high pressure, with polythene float and fly nutscrewed for iron pipe or brass ferrule and fixed all as specified and as directed. 24 Supply and fixing in repairs 20 mmdia gun metal, globe or gate valves, with iron head, screwed both ends for iron pipe all as specified and as directed. 25 Supply and fixing in repairs Tubular towel rail aluminium anodised powder coated, 20mm dia, D type, 60cm long between flanges all as specified and as directed. 26 Taking down old door or window or cup board Chowkhats or frames n.exc 1.50 sqm each with shutters but without taking off shutters from the frames complete all as specified and directed. 27 Taking down door or window or cupboard Chowkhats of frames of size exc 1.5 sq.m but n exc 4sqm each with shutters (Without takingof shutters from the frame) complete all as specified and directed. 28 Supply and fixing powder coated Anodised aluminium window and ventilator shutters, sliding type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified. 29 Supply and fixing anodised aluminium door shutters aluminium section 0.55kg/m including necessary joining cleats , glazing clips, rubber neoprene packing, handles 2 nos in each door, hinges, anodised aluminium snap beading screws etc with powder coating complete all as specified and directed. 30 Supply and fixing Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Paneling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing. 31 Supply and fixing Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube,as per specification & drawing. 32 Material and labour 18mm thick PVC cupboard Frames & shutters with decorative face veneers on both faces including necessary hinges, handles and locks fixed with screws all as specified and as directed. 33 Supply and fixing powder coated aluminium frame for doors, windows, ventilators, partitions with one or more rebates including anodised aluminium snap beading, stainless steel screws joining cleat for fixing etc complete all as specified and as directed 34 Supply and fixing 4.8mm thickfrosted sheet glass ordinary quality fixing with necessary rubber gasket and beadings etc in squares exc 0.50 sqm in each pane complete all as specified and as directed. 35 Material and labour for 12mm thk prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work complete all as specifiedand as directed 36 Supply and fixing 100mm mild steel butt hinges medium weight including screws complete all as specified and as directed. 37 Supply and fixing aluminium anodisedbarrel tower bolts 150mm of extruded section complete all as specified and directed. 38 Supply and fixing aluminium handle 125 mm cast type anodised complete all as specified and directed. 39 Supply and fixing 250 mmlongAluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and directed. 40 Taking down cement plaster of any description on bricks or stone walls , RCC ceiling etc, including racking out joints, hacking for keys, scrubbing down with water etc, all as specified and as directed. 41 Material and labour for 15 mm thick cement plaster in two coats 5mm thk in CM 1:4 with WPC over 10mm thk in CM 1:6 on brick wall or concrete surfaceand finish the surface fair and even complete all as specified and directed. 42 Material and labour Preparation of new plastered surface on wall by and applying Two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm complete all as specified and as directed . 43 Material and labour for 10 mm thick cement plaster in CM(1:6) on brick wall or concrete surface finish the surface fair and even without using extra cement complete all as specified and directed. 44 Material and labour preparation ofnew plastered wall surfacesand applying two coats of oil bound distemperover a coat of primer and a coat of1mm wall care putty all as specified and as directed . 45 Material and labour for 5mm thickin CM(1:3) on ceiling and finish the surface fair and even without using extra cement complete all as specified and directed. 46 Material and labour preparation of newly plastered ceiling surfaces and applying two coats of oil bound distemper over a coat of primer all as specified and as directed . 47 Material and labour complete removal of existing painted wall surfaces and applying two coat or more of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10sqm in camouflage pattern complete all as specified and as directed 48 Material and labour complete removal of existing painted wall surfaces and applying two coats of Oil bound distemperover a coat of primer and 1mm thk wall care puttycomplete all as specified and as directed. 49 Material and labour complete removal of existing painted ceiling surfaces and applying two coats of Oil bound distemper over a coat of primer complete all as specified and as directed. 50 Material and labour for preparation of old painted surfaces of wood or wood based surfaces over 10cm width or girth and applying one coat of synthetic enamel paint on wooden surfaces complete all as specified and as directed. 51 Material and labour for preparation of old painted steel/roof surfaces any description over 10cm girth and applying one finishing coat of synthetic enamel paint on steel surfaces complete all as specified and as directed. 52 M& L for complete removal of existing roof treatmentfrom roof slabincluding taking down existingcement mortar, cleaning of the rubbishes and disposal of the same to a distance n exc 250 m. complete all as specified and as directed. 53 Supply only integral water proofing compound 54 Material and labour for complete removal of existing roof treatmentfrom roof slabincluding taking down existingcement mortar, cleaning of the rubbishes and disposal of the same to a distance n exc 250 m. and providing APP based membrane roof treatment in layers with the following course of treatment from bottom to top :-(a) Brushing neat cement slurry with 3.0 kg of cement per sqm(b) Screed bed or bedding layer of mortar 20mm thick in CM 1:4 with WPC @ 3% of weight of cement(c) Applying bituminous primer @ 0.40 Lit/Sqmover plastered surfaces of roof slab including parapet wall. (d) APP based polymeric membrane minimum weighing 3 kg/sqm and minimum 3mm thick reinforced with polyester non wove fabric (wt. not less than 150 gms/sqm) land on primed surface by torch application complete all as specified. Polymeric membrane shall be taken to a height of 45 cm (minimum) and then inserted inside the groove of parapet wall and shall be filled with bitumen mastic filling.(e) Applying two coats of bituminous Aluminium paints on top of APP membrane surfaces @ rate of 0.10 Lit/Sqm for each coat. 55 Note :(i) The work in respect of water proofing treatment shall be carried out only by authorized / approved applicator of the manufacturers / firms of APP membrane. The contractor shall produce the evidence in support of work carried out by the authorized applicator as approved by manufacturers / firms before claiming payment.(ii) Laying APP based polymeric membrane shall be done by torch on method or as per manufacturers instructions.(iii) A minimum overlap of 150mm and 100mm should be made at the end and side of the polymeric membrane respectively and sealed overlaps and joints as per manufacturers instructions. (iv) Coved fillets in PCC(1:2:4) type B-0 using 12.5mm graded stone aggregate, of radius 75mm shall be provided at the junction of roof and parapet wall/mumty/chimney/other vertical surfaces. 56 Demolition of cement concrete reinforced Roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work all as specified and as directed. 57 Material and labour providing, RCC in Fins, fascias, louvers, parapets, and railings exc. 60cm in height, newels, balustrade, and the like using type B1(20mm graded aggregate) complete all as specified and as directed. 58 Formwork to fins, louvers, fascia complete all as specified and as directed. 59 Supply and fixing Mild steel bars 6 to 8mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends bindingand welded to existing bar with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips along with necessary formwork complete all as specified and as directed. 60 Supply and fixing in repairs Health faucet (ABS Body) mild steel chromium plated suitable for 15mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified. 61 Supply and fixing 110mm in repairs PVC (SWR) pipes double socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed. 62 Supply and Fix in repair Vitreous China bowl Urinal , flat back, size of 465 x 355 x 265mm white (minimum), with grating and union for discharge pipe including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2 securing urinal to plugs brass screws pointing around urinal for discharge pipe complete all as specified and directed. 63 Supply and fix Waste coupling of PTMT 32mm bore dia of discharge pipe (half or full threaded)(Minimum weight 32mm -45gms) for urinals fixed complete all as specified and as directed. 64 Supply and fixing PVC (SWR) Vent cowl of bore dia 110mm complete all as specified and as directed. 65 Supply and Fix door stopper of aluminium alloy,anodised with hard drawn steel spring of length 150mm complete all as specified and as directed. 66 Supply and fixing Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in- charge. 67 Supply and fix Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed. 68 Demolition Concrete in ground floors unreinforced and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed. 69 Material and labour for 75mm thick cement concrete type C-2, ( 1:3:6) (40 mm graded aggregate) as in plinth protection finished fair and even without using extra cement etccomplete all as specified and as directed. 70 Supply and fixing in repairs Harrison curtain rails, mild steel, chromium plated with fixing brackets, stops, rollers etc. complete all as specified and as directed. 71 Supply and fix in repairs door closer hydraulically regulated aluminium extruded section, designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80kg and fixed complete all as specified and as directed. 72 Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed. 73 Material and labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc.,including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the floor or the side of waist slab with suitable arrangement complete all as specified and as directed. 74 Supply and fixing 75mm dia PVC (SWR) pipes double socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed. 75 Supply and fixing 75mm dia PVC (SWR) pipes double socketed, in any length with rubber ring joints, fixed to walls complete all as specified and as directed. 76 Supply and fixing 110mm dia PVC (SWR) bends complete all as specified and as directed. 77 Supply and fixing 110mm dia PVC (SWR) branch piece, double (double Y) equal or unequal complete all as specified and as directed. 78 Material and labour 25mm thk Cement concrete type B-1, 1:2:4 (20mm graded aggregate) complete all as specified and as directed. 79 Supply and fixing 32 mm dia Low density polyethylene pipes (LDPE) of pressure rating 6 kg/ cm2 on wall complete all as specified and as directed. 80 Taking down copper/aluminium point wiring (light, fan, socket or power)including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc., removing materials to store for keeping in safe custody for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors etc complete all as specified and as directed. 81 Material and labour for point wiring in replacement with two single core 1100 V grade FRLS-H conforming to IS-694 PVC insulated unsheathed cables of size 1.5 Sq mm multi-stranded Copper conductor drawn through and including rigid PVC conduit and conduit accessories fixed on surface including breaking of walls and making good to disturbed surfaces in wall/roof/ceiling where required completean earth wire of PVC cable 1.5 Sqmm multi stranded copper conductor and connected to all metal boxes and common earth dolly all as specified and directed for the following :- 82 (a) One light point , controlled by one switch complete 83 (a) One light point , controlled by two switch complete 84 (b) One fan point, controlled by one switch complete 85 (c) One 3 pin 5 Amps switch socket combination on independent board 86 (d) One 3 pin 5 Amps switch socket combination on the same board with other switches, 87 All as per item No 80 above butwith 4.0 Sqmm single core PVC sheathed FRLS-H copper conductor cable, with PVC conduit for 3 pin socket outlet 15 amps on independent board 88 Supply and fixing ceiling rose in replacement , surface bakelite, 65x50mm, two to three terminals complete all as specified and as directed by the Engineer-in-Charge 89 Supply and fix in replacementswitch piano flush type single pole one way 5 A 240 Volts complete all as specified and as directed 90 Supply and fix in replacementswitch flush type single pole two way 5 A 240 Volts complete all as specified and as directed. 91 Supply and fix in replacement Socket outlet 3 pin, 5A, flush type complete all as specified and as directed. 92 Supply and fix in replacement switch Socketcombination 2 in 1,5 Amps Flush type 240 Voltscomplete all as specified and as directed. 93 Supply and fix in replacement switch Socketcombination 5 Amps / 16 amps, 5 in 1 flush type 240 Voltscomplete all as specified and as directed. 94 Supply and fixing in replacement of Stepped type Electronic Fan Regulator, Flush type on the existing phenolic laminated sheet complete all as specified and as directed. 95 Supply and fix in replacementfor Wiring for Circuit / Sub main Wiring of size 4x4.0 sq. mm along with earth wire of size 2 x 4.0 sq.mm, Single Core, PVC insulated copper conductor FRLS-H Cable in surface / recessed PVC Conduit of 32 mm dia complete all as specified and as directed.Note: Four runs of main cable, 2 runs of earth wire and one run of PVC conduit shall be measured as one unit for payment. 96 Supply and fixin replacement for Wiring for Circuit / Sub main Wiring of size 2 runs of 2.5 sq.mm along with earth wire of size 1 run of 2.5 sq.mm, Single Core, PVC insulated copper conductor FRLS-H Cable in surface / recessed PVC Conduit of 25 mm dia complete all as specified and as directed.Note: Four runs of main cable, 2 runs of earth wire and one run of PVC conduit shall be measured as one unit for payment. 97 Supply and fix in replacement sheet metal enclosure powder coated double door for Distribution Board,TPN 6 way prewired DBsuitable forMCB Incomer IP 43 , IK 09 ,including disconnecting electric connections complete all as specified and as directed. 98 Supply and fix in replacement sheet metal enclosure powder coated double door for Distribution Board,TPN 4 way prewired DBsuitable forMCB Incomer IP 43 , IK 09 ,including disconnecting electric connections complete all as specified and as directed. 99 Supply and fix in replacement415V 10KA B curve miniature circuit breaker (MCB) of TPN 40 A in the DB complete including testing and commissioning complete all as specified and as directed. 100 Supply and fix in replacement415V 10KA B curve miniature circuit breaker (MCB) of TPN 16 A in the DB complete including testing and commissioning complete all as specified and as directed. 101 Supply and fixMCB SP 6 A, B curve, 10 kA including , disconnecting electric connections, dismantling from position unserviceable MCB for taking into credit completeall as specified and as directed. 102 Supply and Fix in replacementLED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed 103 Supply and fix in replacement LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. . 104 Supply and fix in replacement LED light fitting 1x9W/1X10Wbulkhead luminaries including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. 105 Supply and fixing in replacement ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated complete all as specified and directed. 106 Supply and fix exhaust fan in replacement , steel body AC single Phase. 230V of size 300mm sweep with, blades, and frame and louverscomplete all as specified and directed. 107 Material and labour for cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; andconcealed conduit wiring, etc., and making good and painting to match with existing wall colour, cutting not exc 10cm girth in brick walls complete all as specified and as directed by the Engineer-in-Charge 108 Supply and fix in replacementGI bracket made out of 32 mm dia GI pipe length 1.2 mtr long bent to an angle 135 degreepainted with two coats of aluminium paint over a coat of zinc chromate primer along with clamps, bolts, nuts etc complete allas specified. 109 Supply , erection, testing ofmaintenance free chemical earthing byauguring & installation of copper bonded rod using machine bore and filling with backfill compound.The specification is (a) Low Carbon High Tensile Steel rod copper bonded rod of dia 20.2 mm with Copper Plated (250+ microns) , length 3m , with top end of the rodconnected with copper plated welded bus bar terminal of dimension 150mm x 50mm x 6 mm, complete conforms to IS : 3043 - 1987 (b) The earth pit bore dia should be 150 mm and length 3 m(c) Backfill compound with following specification has be filled in the bore after placing the copper bonded rod : - Carbon based, high conductive backfill compound Conductolite(50 kg per electrode to be filled around each electrode )with resistivity< 0.5 ohm-metre (In dry conditions) & resistivity is non-moisture dependant,pH Value : 8.0 - 9.0, electronic & ionic conduction, less susceptible to shrinkage, with hygroscopic & corrosion resistive properties (d)covering with Heavy duty Earth pit Chamber cover made of HDPE with high strength to weight ratio ( Capable of withstanding upto 8 ton) , Bottom opening dia - 348 mm Top opening dia - 256 mm, Height -260mm . Make : M/s Ashlok Safe Earthing Electrode Limited. Code : ASEEL CBR 203 250 WBB 110 Material and labour for Earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc. as required 4 mm dia galvanised iron or steel wirecomplete all as specified and as directed by the Engineer-in-Charge 111 Supply and fixing in replacement LED building security light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and as directed.
