Development Work In Chatriwali Dhani Ward No. 52, Dausa. - .No Work In Chatri Wali Dhani Ward No. 52, Dausa, Item Provwling And Firing Of Frp Made Wave Shade Having Sale Prys 4609 Ner. The Wase Slide Remed Pipe And Ladder Should Be Made By Steel F, Dausa-Rajasthan

Development Work In Chatriwali dhani Ward No. 52, Dausa. - .no work in Chatri Wali Dhani Ward no. 52, Dausa, Item Provwling and firing of FRP made wave shade having sale prys 4609 ner. The wase slide remed pipe and ladder should be made by steel frame rectangular square pipe 50mm x 25mm for safety purpose railing should be made by 2fuam IDGI pipe Total FRP slide length shall be 3 utt. with fman thickness overall both side finnhưng 1 total mea 3.6 mer x 0.6 unt. Platform height shall be 1.8 mar. from ground level connected with key support 60mm IDG work. All the shap afges and corners are properly grinded to give smooth finishing. The Pipes and components arr joint in the side. powder snated on surfaces. Slide should be made in a single monddod piece having wave slupe there shall be no ary FRP components should be paint and finished complete set as per direction and satisfaction of engineer in charge SURE BOARD Providing and fixing of surf bord of size 910mm (length) x 860mm (width) x 1400mm Oleight) fabricated with center pipe of 1000mm nominal bore shall be made frons class Ul. pipe. The sleeve pipe shall be made of 125m OD scantless pipe with thickness of 5men and bohed to main fiane with MI SS bolts. The bottom support shall be pipe. The poddle frame of 50NB shall be made firm clasa GI pipe supported with 70simen be replaceable. The foundation to be used for fixing should be a structure and shall be made from & 10uen thick, Main pipe shall be soppested with 25 min 225mm M.S. angles of 3 mm thickness and 22 mm x 40mmm CRC square pipes of Imen thickness. Bushes shall be used of 70 men outer dometer with Soms thickness. The footrests shall be made from aluumimen casting material of size 320kenm 250mm with Imm thickness MS. Plate cups shall be made up of high quality fiber reinforced plastic material, The pins to he used shall be made up of 035 mm welded of MS plate of O 250 mm & 10 mm thickness. The handle frame of 25ND shall be made from C class GL bend MS. ftat and can center pipe of G1. of shall be used. Closing SAE 8620 bright material. The bearing shall be med art of 6007zz permanent lubricated sealed bearing of reputed cerclips shall be used fir assembly of A34. The powder coating shall be done with pure polyster powder of ackzonoble or berper with 60 to 70 SONU C class welded with M.5. round plate of 1250mm 270mm 5mm. for support to footrest of 200mm x brand (SKF FAG), High tensile steel with galvanized on bolts shall be used for assembly The micron thickness, all complete as per drawing, design, directions and approval of engineer-in-charge regarding material. shape of equipment, color of metal SEATED PULLER Providing and fixing of seated puller of size 1900nam (length) x 740mm (width) x 1920nan (height) fabricated with a center pipe is ef 100NB shall be made from C dass GL pipe. Dunom supported of MS. round plate of 0250 mm & 10mm thickness shall be welded. All linkages shall be made up of 25NB C class G.1. pipe. The handle frame on 32N13 class G.1. pipe. The seat frame of 32NBC class G1 pipe, to build structure bushes to be used which shall be made from seamless pipe of 60mm OD and 5mm thickness as well as 60mm diameter solid bur bush shall be used. The Gsusdation should be used for fixing is a structure and shall be made from center pipe of G1 of 80NB C class pipe welded with MS. round plate of 0250mm & 10mm thick. Main pipe shall be supported with 25mm x 25cm M.S angles of Jum thickness and 20mm 40 mm CRC square pipes of 3mm thickness. Foundation enver closing cap shall be made from FRP material. The seats and hack rests to be fitted on the outer frames shall be made up of M 5. sheet of sizes 330mm x 300mm x 2 mon thickness and deep drawn and pressed in tools and dies to have uniform radius of 20mm wah no sharp edged. Cloung caps be made up of high quality fiber reinforced plastic SIT UP BOARD DOUBLE Providing and fixing of sit up board double of sizes 176tham length) 1140aan (width) x 66mm (height) fabricated with the main frame of 25mm NIB shall be made from C G.I. pipe. FRP sheet of 3mm thickness shall be moulded en 4 couting shell be done with pure polyester powder Ackzonoble or berger paints with 60 to 70 micron thickness. The main frame. The remaining frame of the sit up board of 32nan NB shell be made from C foundation should be used for fixing is a structure and shell be made from center pipes of G.1. of BONB C class welded with MS. round plate of 3250mm & 10men thick. Main piger shall be supponed with 25mm 25mm MS angles of 3mm thickness and 20mm 40nen CRC square pipes of Jem thickness, all complete per drawing, design, daections and approvel of engineer-in-charge regarding material, shape of equipment, color (of metal, seat and podal), and fixing.of.opapment.etc SEATING AND STAINDING TWISTER Providing and fixing of seated & standing twiter of size 170than length x 540man (width) x 1250um (height fabricaned with a center pipe of 100mmm Nit shall be made from class G. 1 round pipe The MS. mund plate 2250mm & 10mm thickness shall be welded at bottom Handle and bottom sleeve pipe of 125mm OD with thickness Sman should be provided for easy assembly, replacement and maintenance. The bottom frame of seating and stainding twister of 32 NH, 50 NB. & 25 NIB shall be made fondes of pipe. The handle frame of seating and stainding twister of 25NB and foot resing frame of seating sade shall be made from C class G1. of 25nma NB the foundation should be used fin fixing is a smacture and shali be made burn center pipe of G1. of 80NB C class, welded with MS cound plate of 0250mm & 10mm thick Main pipe shall be supported with 25mus 25men M5. angles of Jew thickness and 20wn x. 40 mes CRC squre pipes of Jmm thickness. The twister plate to be fitted on the bottom frene shall be of high quality fiber reinforced plastic material. The pins to be sodbe shall be made up of 65mm SAE 8620 bright material The bearing shall be made of 6205zz parmanen Adicated seated bearing reputed brand (SKF FAGY High tenute steel with galvanized muts and bolts shall be used for assembly. The powder coating shall be done by pure polyester powder of berger point with 60 to 70 micron thickness all completes per drawing design, directions and approved of engineer-in-charge Uneven bar DIMENSIONS: 3200mm (Length) x 1360mm (Width) x 2850mm. (Height) SAFE AREA: 5.4Mtr x 5.2Mtr. Uneven bar Equipment made from C class G.1. Pipe of different NB. NB stands for Nominal Bore Sizes te foternal Diameter of pipe in millimeters. The main frame of 100 NB made from C class G.1. pipe. The bottom support of Mmm & 10mm 20 S. round plate of 0250 thickness is welded at bottom. The handle frame is of 32nan NB made from C class G1. pipe. The foundation used for fixing is a structure and made from center pipe of G.1 of 80 NB class Welded with M.S round plate of 0250 mm & 10mm thick. Main pipe supported with 25 uun X 25mm MS angles of mun thickness and 20mm x 40mm CRC square pipes of 3mm thickness. Closing Caps are made from aluminum casting of 3 mmm thickness. The powder coating done with Polyester powders from Ackzonoble or Berger Paints with 60 to 70 micron thickness Cycle DIMENSIONS:-1570mm (Length) x 570mm (Width) x 900mm. (Height). SAFE AREA: -2.5Mtr x 1.5Mtr. Cycle equipment made from C class G.1. Pipe of different NII. (NB stands for Nominal Bore Stres Le. Internal Diameter of pipe in millimeters). The main frame of 50 NB made from C class G.1. pipes. M.S. round plate of 0300 mm & 10mm thickness used to form a paddle assembly, is of 25NB made from C class G pipe The handle frame CL The seats and Back rests are fitted on the outer frames are made up of M.S. Sheet of size 330 mm X 300 mmX20mm thickness and deep drawn and pressed in tools and dies to have uniform radius of 20 mm with no sharp edges. For foundation 32NB C class G.I. pipe used. Closing Caps are made up of high quality Fiber reinforced Plastic material. Pins used of Diameter 25mm are made up from SAE 8620 bright material. Pins used of Diameter 13mm are made up from ENS material with CRCA pipe 20X20mm of thickness 3.00mm for paddle assembly. The bearings used are 6001zz & 6205zz permanent lubricated sealed bearing of reputed brand. High tensile steel with galvanized nuts and bolts are used for assembly, circlip used for assembly are of A24 type. The powder coating done with Pure The Polyester powders from Ackzonoble or Berger Paints with 60 to 70 micron thickness Supply Decorative Fiber Benches. Which is made by Cast iron and FRP sheet Plate. Bench length 5 feet back Hengtht 25 Front height 16 depth 15 and bench leg is made by Cast Iron, Including Bench leg Earth work and concrete Foundation M-15 Grade Including All material and Labor charges

Refer document

Refer document

INR 4.89 Lakhs /-