|
| 1 | Excavation in foundation in ordinary soil (Loam, clay or sand) including lift upto 1.50 M, and lead upto 30 M and including filling watering and ramming of excavated earth into the trenches or into the space between the building and the sides of foundation trenches or into the plinth and removal and disposal of surplus earth as directed by the Engineer-in charge upto a distance of 30 M from the foundaiton trenches. (Where machine can not reach/move). For Building work only .S.I.NO-251 |
| 2 | Providing and injecting chemical emulsion for preconstructional antitermite treatment and creating a chemical barrier under andallaround the column pits, wall trenches, basement excavation, top surface of plinth filling, junction of wall and floor along externel perimeter of building, expansion joints, surrounding of pipes and conduit etc. complete (plinth area of the building at ground floor only shall be measured as per I.S. 6313 part II 1981) Chlorpyrifos or any other approved material such as Heptachlor or chlordane will be used. The rate of application of chemical emulsion shall be as follows. CH-08,Item-01 page-27 |
| 3 | Concrete with 4cm. Gauge brick ballast ,Fine sand of 1.25 F.M. And cement ,in proportion of 8:4:1 in foundation sand under floors ,in cluding supply of all materials, labour, Tools & plantsetc .required for proper completion of the work. Ch 5 SI. 275 |
| 4 | R.C.C. work with cement approved coarse sand and 2 cm. guage approved stone grit in the proportion of 1:1.5:3 in Slabs excluding supply of reinforcement and its fixing and binding the same with 24 BWG binding wire and including necessary centering and shuttering etc.and also including supply of all materials, labour and tools and plants etc, required for proper completion of the works. including cost of binding wire. The rate excludes making of drip course which shall be paid extra. (For COLUMNS).S.I.NO-289 |
| 5 | M-150 brick work in 1:4 cement and Coarse sand of2.20 fineness modulous mortar in foundationand plinth including supply of all material,labour and tools and plants. ect. required forproper completion of work. Ch. 6SI. 307(a) |
| 6 | R.C.C. work with cement, coarse sand & 2cm gauge stone ballast in 1:2:4 in lintels, bend, sunshede etc. complete as per SI. No.283. |
| 7 | E/W embankment cutting or inembankment inordinary soil,excavation to be in the form regular pits not exceeding 0.50M in depth and earth work in embankment to be in 20cm Layers including remming and dressing the surface to required level and slope and also including 1.5M lift and 5.00km lead . The earth from cutting to be use in making embamkment or to be deposite as spoil banks with in 3.00 km distance as directed by the Engineer incharge S.I. No. 253(a)+231 |
| 8 | Supplying and filling Sand in plinth FM 1.25 under floors including watering, ramming, consolidating and dressing complete.as per satisfection of engineer in charge .PWD SOR MBD SI No-255 |
| 9 | M-150 Class B/worksin 1:4 Cement & C/Sand mortar in S/structure i/c supply of all materials labour, T and P etc complete as per SI No.307(a)+309+310 |
| 10 | M-150 brick work in 1:4 cement & coarse sand mortar in s/str in half brick wall etc. complete SI No. 307(a)+309+310(a). |
| 11 | Cement Concrete with 2cm. guage approved stone ballast coarse sand and cement in proportion of 4:2:1 including supply of all materials, labour and T&P etc. required for proper completion of work. S.I.NO-279A |
| 12 | R.C.C. work with cement approved coarse sand and 2 cm. guage approved stone grit in the proportion of 1:1.5:3 in Slabs excluding supply of reinforcement and its fixing and binding the same with 24 BWG binding wire and including necessary centering and shuttering etc.and also including supply of all materials, labour and tools and plants etc, required for proper completion of the works. including cost of binding wire. The rate excludes making of drip course which shall be paid extra. (For Beams).S.I.NO-284A |
| 13 | R.C.C. work with cement approved coarse sand and 2 cm. guage approved stone grit in the proportion of 1:1.5:3 in Slabs excluding supply of reinforcement and its fixing and binding the same with 24 BWG binding wire and including necessary centering and shuttering etc.and also including supply of all materials, labour and tools and plants etc, required for proper completion of the works. including cost of binding wire. The rate excludes making of drip course which shall be paid extra. (For slab).S.I.NO-284A |
| 14 | 12 mm thick plaster with cement and coarse sand mortar in 1:6 on smooth surface of wall/c all complete as per SI No.586. |
| 15 | 12 mm thick plaster with cement and coarse sand mortar in 1:6 on rough surface of wall I/c all complete. SI No.586+596. |
| 16 | 12 mm thick plaster with cement and coarse sand mortar in 1:4 I/c all complete as per SI No.584 |
| 17 | 12 mm thick monolythick plaster with cement and approved coarse sand mortar in 1:3 I/c all complete as per SI No.583. |
| 18 | Marking drip coarse in sun shades or facie with 1:3 cement and fine sand mortar i/c all complete as per Ch. 13Si 600 |
| 19 | Engraving lines in the plaster of the outer face wall vertically and horizontally to display the surface as stone facing as directed by the Engineer-in-Charge including labour and T&P etc. required for proper completion of the work.S.I.NO.598 |
| 20 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. (TMT Bar) of grade FE 500Dor CH. 10 SI NO. 504 |
| 21 | Mild steel or iron work in heavy sizes such as trusses, built-up gates, door frame etc. I/c all complete as per SI No. 503. |
| 22 | Providing and fixing 1mm thich M.S. Sheet door with frame of 40x40x6mm (1½\"x1½\"x¼\") angle iron 3.15 mm (1/8\") thick M.S.in all respect as per Si No 517a |
| 23 | 2.5cm thick 1:2:4 plain cement concrete floor with cement approved coarse sand and 2cm Graded approved stone grid laid in panels finishing with 3mmloating coat of 5:1 as specified over and including 8 cm thick base concrete consisting of cement fine guage in the proportion 1:4:8 [ S.I. No. 601 ] |
| 24 | Screeding over roof with bitumen paint @ 1.00ltr/sqm without spreading sand etc. complete as per S.I.No.543 |
| 25 | Supply and fixing 6 to 8 mm thick ivory or light shades vitrified tiles of standard make 600 x600 mmsize(BELL / KAJARIA / SOMANI or other standred make) in flooring and skirting with 1:3 approved cement and coarse sand mortar finished with in its cement colour slurry, jointing and polished of approved quality complete includingsupply of all materials labour tools and plants etc required for proper completion of the work. as per directionof Engineer-in- charge.New item 5Ch 14,page-40 |
| 26 | Supply and fixing 6mm thick china glazed tiles of first quality inskirting or dado laid with 1:3 cement and approved coarse sand mortar finished with white cement slurry jointing and polishing complete including supply of all materials, labour and T&P etc. required for proper completion of the work. SI No 628 |
| 27 | Providing an laying \"brick coba\" 12mm thick laid with M-150 class brick bat coba 7.50 cm thickwith gap of 15mm to each other, over 20mm thick base of cement mortar 1:4 cement and coarse sand mixed with water proofing compound spreading cement slurry mixed with aereliccement concrete water proofing compound filled gaps of coba & top of coba mortar mixed with water proofing compound in 1:4 cement and coarse sand mortar finished smooth & top mashed false square 30cm × cm and side wall parapet shall be mono tythic plaster wall upto 30 cm higher and junction and corner shall be rounded by brick ballast cement and coarse sand masonary Coba with top finished plaster mixed with acetic water proofing compound @2% by weight & including S/o all material, labour, T&P etc complete for proper comletion of work.New item 3. Ch 11,page-33 |
| 28 | Providing Wall Putty on new surface with approvel quality material of berjer/j.k./birla etc make 2 coatsCH. 15new item 12 |
| 29 | Finishing wall with water proof cement paint of approved make and quality on new work with two coats over one priming coat i/c all materials,labour,Tools & plant etc. complete CH. 15 SI NO. New item 8+9 |
| 30 | One priming coat and two coats oil bound distemper on new work I/c all complete as per SI. No.658+659. |
| 31 | Painting or varnishing work in small areas or new wood work with one coat (upto one square metre of ready mixed priming paint and one coat of approved superior quality ready mixed paint or varnish including supply of all materials,labour,Tools & plants etc.required for proper completion of the work. Paint to be used ISI marked. CH. 15 new item no- 1(a)+2+3/2 |
| 32 | Cement Concrete with 4cm gauge B/B, F/Sand of 1.25 F:M cement proportion 12:6:1 in foundation and under floors including supply of all meterials,labour and T&Petc ,required for proper completion of work . (S.I.No. 273) |
| 33 | S/F 80mm thick precast cement concerete I-shape interlocking paver block a with top layer of minimum 8mm thickness having plan dimension 200x(160+120mm) of O.P. cement smooth high gloss finish, skid reditant. Manufactured from rubber moulds through vibro-compression machanism The compressive strength of concrete paver block shall not be less than 30MPA (M-30) and wight 5kg per no confirming to IS 15658-2006 with a 4cm thick layer of time sand including cost of material, labour T&P TAXES etc required for proper completion of the work as directedby engineer-in-charge. New item no-05chp no -21 page-51 |
| 34 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc. linternal work - Exposed on wall :. S.I.NO-18.10.1 |
| 35 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc. linternal work - Exposed on wall :. S.I.NO-18.10.2 |
| 36 | Providing and fixing brass bib cock of approved quality including complete inall respects. S.I.NO-18.15.1 |
| 37 | Providing and fixing white vitreous china wash basin including making all connections but excluding the cost of fittings .(Flat back wash basin of size 550x400mm) S.I.NO-17.25.2 |
| 38 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.S.I.NO-17.28.1 |
| 39 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank lSI: 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. S.I.NO-18.48 |
| 40 | Wiring point for light with 1.5mm FRLSHPVC insulated multistrand copper conductor cable in heavy gauge PVC conduit with 8 SWG earthcontinuty wire draw inside the conduit complete as SI-121 C |
| 41 | Wiring point for Fanwith 1.5mm FRLSHPVC nsulated multistrand copper conductor cable in heavy gauge PVC conduit with 8 SWG earthcontinuty wire draw inside the conduit complete as SI-121 C |
| 42 | Wiring point for Plugwith 1.5mm FRLSHPVCinsulated multistrand copper conductor cable in heavy gauge PVC conduit with 8 SWG earth continuty wire draw inside the conduit complete as SI-124 C+187 C+188 C |
| 43 | S/F of power plug 15 Amp./250volt flush type moduler switch and 5 pin 20A/250volt flush type universal modular socket on conceled m.s boxi/c all complete as SI-1139 |
| 44 | S/F of LED tube light with batten fitting sutablefor up to 1×22 watt LED tube light fitting i/c tube on surface complete as SI-1413 (A) |
| 45 | S/F of surface / flush mounting 12 way SPN distribution board without addition metal doorwith out Mcb.complete as SI-1025 Cat A |
| 46 | S/F of 6 Amp. To 32 Amp.SPMCB 10 KA C curve SI-1002 CAT A |
| 47 | S/F of63 Amp.D.P. Isolator SI-1005 (B) CAT A |
| 48 | S/F of fan box round or haxagonal ofapproved make complete in all respects as SI-1149 |
| 49 | S/f of GP modular switch box for 1/2 module ofapproved make and quality 8 module completeas SI-1152(E) |
| 50 | S/F of 250×250×65mm switch box of approved make and qulity complete as SI-163 |
| 51 | Erection & testing of ceilling fan regulator etc. excluding supply of down rod comp.As SI-1115 |
| 52 | S/F of PVC condute of 25mm outer dia i/c alllabour T &P etc. complete as SI-185(iii) |
| 53 | Add for light/Fan point with modular type switch in place of piyano type As SI-187(A) |
