Tender For Various civil related works at MLA Niwas-2 (New) Darulshafa Situation House No.-108B. - Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. For thickness of tiles 10 mm to 25 mm. D.A.R No-15.23.1 2 Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. (D.A.R No-15.56) 3 Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. In Lime mortar. D.A.R No-15.7.3 4 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply and all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.Internal work - Exposed on wall. 25 mm nominal dia Pipes D.A.R No- 18.7.3 5 Providing and fixing Clorinate Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c. fixing the pipe with clamps at 1.00 m spacing.This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-charge Concealed work including cutting chases and making good the etc. 20 mm nominal outer dia Pipes DAR No- 18.8.2 6 Providing and fixing of CPVC gate valve of 25mm dia nominal size of approved quality as per directed by Engineer-in-Charge. 7 Providing and fixing PVC pipes (6kg/sqcm) for sewer line including all fitting including trenching refilling & testing of joints complete as per direction of Engineer in charge110 mm dia. 8 Providing and fixing PVC pipes (6kg/sqcm) for sewer line including all fitting including trenching refilling & testing of joints complete as per direction of Engineer in charge, 90 mm dia. 9 Providing and fixing of PVC Door bend of 110mm dia nominal size of approved quality as per directed by Engineer-in-Charge. 10 Providing and fixing of PVC T of 110x110x110 mm dia nominal size of approved quality as per directed by Engineer-in-Charge. 11 Providing and fixing of Nahani Trap of 110mm dia nominal size of approved quality as per directed by Engineer-in-Charge. 12 12 mm cement plaster of mix: 1:4 ( 1 cement 4 coarse sand) (DAR No- 13.4.1) 13 Providing and laying Ceramic glazed floor tiles of size 300x300 mm ( thickness to be specified by the manufacturer ) of 1st quality conforming to IS : 15622 of approved make in all colours shades except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 ( 1 cement 4 coarse sand) Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc. complete. (D.A.R No- 11.40) 14 Providing and fixing 1st quality ceramic glazed wall tiles rectified (Kajaria/Johnson/RAK premium quality) conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, blackas approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. 300x450mm 15 Providing and fixing of white glazed earthen ware Wash Hand Basin with pedestal CERA MAKE with C.P jali, C.P angle valve, pvc waste pipe, C.P basin mixture, PVC connection 15mm dia 400mm long including supply of all materials labour T&P etc. required for proper completion of the work. (WHB Model :Cornet Size, 630x450mm, Cat No- S2040104). 16 Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: White Vitreous china Orissa pattern W.C. pan of size 580x440mm with integral type foot rests. DSR No- 17.1.1 17 Providing and fixing white vitreous china Single Piece water closet Cera make (CHILE 675x360x755mm) with manually controlled device conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required, ( W.C. pan with ISI marked white solid plastic seat and lid ). 18 Providing and fixing C.P. Brass Two way bibcock heavy code No-0257 L&K or Equivalent make including supply of all material, labour T&P etc. complete. 19 Providing and fixing C.P. brass wall mixture with tele phonic shower 3 in 1 (L&K make code 0457 ) or Equivalentquality. 20 Supply and Fixing C.P. brass bib cock 15mm. dia. Short body L&K 0057 including supply of all materials, labour, T&P etc. required for proper completion of the work. 21 Providing and fixing C.P. brass angle valve l&Kfor basin mixer and geyser points of approved quality 15 mm nominal bore. 22 Providing and fixing of glass shelf 22 Acrylic make with C.P. Guard standard size and bracket including supply of all material labour T&P required for proper completion of the work. 23 Providing and fixing of glass corner Acrylic make, including supply of all material labour T&P required for proper completion of the work. 24 Providing and fixing C.P. brass OVER HEADshower with arm heavy qualityL&K 0668) with 15mm inlet:100 mm diameter 25 Providing and fixing C.P. Brass Two way angle valve 15 mm dia( L &K 0327 make) with wall flange including supply of all material, labour T&P etc. complete. 26 Supply and fixing C.P. Health Faucet with 8mm Dia 1.00 mtr. Long Flexible tube & wall hook L&K Make including supply of all material, labour T&P etc. complete. 27 Providing and fixing CPtowel Rod OF L&K Make 600x20mm together with pair of CP brass brackets to fit the towel rail complete 28 Providing and fixing CPtowelring L & K or equivelent fittings arrangement of approved quality. 29 Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. (D.A.R No-17.31) 30 Providing and fixing CP Brass Extention pieces 15mm dia nickel plated for fixing of brass fittings. 31 Providing and fixing C.P. Soap Dish l&k make including supply of all material , labour T&P etc. complete. 32 Supply and fixingof steel kitchen sink 610X510X200 mm without drain board, with C.P.jali, P.V.C. waste pipe, bracket, including supply of allmaterial, labour, T&P etc. for proper completion of work. 33 Supply and Fixing C.P. brass bib cock 15mm. dia. Long body L&K 0047 including supply of all materials, labour, T&P etc. required for proper completion of the work. 34 Providing and laying vitnifed tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622 of approved brand & manufacturer, in all colours and shade in skirting riser of steps, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS 15477 in average 6 mm thickness including grouting of joints (Payment for grouting of jointsto be made separately). Size of Tile 600x600mm. D.S.R No- 11.47.2 35 Providing and fixing fly proof wire gauze to windows, celestory windows & doors with M.S. Flat 15x3 mm and nuts & bolts complete. Stainless steel (grade 304) wire gauze of 0.5 mm dia wire and 1.4 mm aperture on both sides. ( DAR No- 10.29.2) 36 Providing and fixing glass panes with putty and glazing clips in steel doors, windows, celestory windows, all complete with. 5.5 mm thick glass panes. D.A.R No- 10.30.2 37 Providing and fixig ISI marked flush door shutters conforming to IS : 2202 (Part-1) non-decorative type, core of block board construction with frame of 1st class hard wood and well matches commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shulters. 35 mm thick including ISI maked Stainless Steel bolt hinges with necessary. (D.A.R No-9.21.1) 38 Providing and fixing of ISI mark Steel almirah shutters of approved brand including supply of all materials, labour T&P etc,. Required for proper complition of the work, as per directed by Engineer-in-charge. 39 Providing and fixing 18 mm thick gang saw cut mirror polished, premoulded and prepolished machine cut for kitchen platforms, vandy counters. Window sills facias and similar locations of required size, approved shade colour and texture laid over : 20 mm thick base cement mortar 1:4 ( 1 cement 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Granite of any colour and shade, Area of slab upto 0.50 sqm DAR. No- 8.2.21 40 Supply and Fixing of Stainless Steel Curtain rod including fancy knob and brackets including supply of all material, labour, T&P etc. required for proper completion of the work. 41 Providing and applying white cement based putty of average thickness 1mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. (D.S.R Item-13.80) 42 Distempering with 1st quality acrylic distemper (ready mixed) having VOC (Volatile Organic Compound ) content less than 50 gram/ litre, of approved brand and manufacturer including applying additional coats wherever required to achieve even shade and colour. Old work (one or more coats). (D.S.R No-13.81.1) 43 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade One or more coats on old work. (D.S.R No-13.99.1) 44 Treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with cement morter 1:2 (1 cemnt;2 Coarse sand) to match the existing floor: With Chlorpyriphos/Lindance E.C. 20% with 1% concentration. D.S.R No- 2.35.3.1 45 Brick work with common burnt clay (non modular) brick of class-150 in superstructue above plinth level up to floor V level in all shapes and sizes in. Cement mortar 1:4 ( 1 cement 4 coarse sand) (DAR No- 6.4.1) 46 Providing corrugated G.S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers fillied with white lead, incuding a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/vertical or curved surfaces) excluding the coast of purlins, rafters and trusses and including cutting to size and shape wherever required. 1.00 mm thick with zinc coating not less than 275gm/m2. D.A.R No- 12.1.1 47 Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. D.A.R No- 15.60
