Tender For Construction Of Site Office At I.M.C. Agra. - Excavation in foundation in ordnary soil (Loam, Clay or Sand) lncluding lift upto 1.50 m and lead upto 30m and including fllling watering and ramming of excavated earth into the trenches or into the space between the building and the sides of foundation trenches or into the plinth and removal and disposal of surplus earth as directed by the Engineer lncharge upto a distance of 30m from the foundation trenches. Mannual (Small work) 2 Providing and laying cement concrete in 1:4:8 (1 Cement : 4 coarse sand :8 graded stone aggregate 40 mm nominal size) and curing complete, lncluding cost of form work. in Foundalion and floors. 3 Steel reinforcement for R.C.C. work including straightening, cutting, ending, placing in position and binding all complete upto plinth level.Cold twisted bars 4 Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement :1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size )i) upto plinth level 5 Earth work in filling by Carted Earth including Labour, T&P, Cartage etc. complete as per directed by the Engineer-in-charge 6 Class- 150 (Non Modulao brick work in 1 :4 cement and Coarse sand mortar in foundation and plinth including supply of all materials,labour and T&P etc. required for proper completion of the work 7 12mm Cement plaster with cement mortar in proportion of 1:4 cement & coarse sand of single coat for interior plastering upto floor two level including internal rounded angtes chamfers, and rounded angles not exceedlng 80mm. ln girth and finished even and smooth. 8 15mm Cement plaster with cement mortar in proportion of l:4 cement & coarse sand of single coat for exterior plastering upto floor two level including internal rounded angles chamfers, and rounded angles nol exceeding Bomm. ln girth and fnished even and smooth. 9 Providing and applying plaster of paris putty of 2 mm thickne$ over plastered surface to prepare the surface even and smooth complete. including curing the cost of all material, labour, T&P etc complete, 10 Finishing walls with water proofing coment paint of required shade I New work (Two or more coats applied @ 3.84 kg/10 sqm) supply of all labour material and T&P required for proper completion of work. 11 Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 llth} sqm over and including priming coat of exterior primer applied @ 2 20 kg/10 sqm) supply of all labour material and T&P required for proper completion of work. 12 Steel work welded in built up sections/ framed work, including cutting,hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets,gates and similar works 13 Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 5.5 mm thickness 14 Providing and fixing water closet squatting pan (Odisa type W.C, pan) with 100 mm Sand Cast lron P or S trap, l0litre low level white P.V.C. flushing cistern, including flush pipe, manually controlled device (handle lever) conforming to lS. 7231, wilh all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests. 15 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps 16 Providing Providing and fixing 600x450mm beveled beveled edge mirror ofsuperior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. 17 Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm or 340x410x265 mm sizes respectively. 18 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture 19 Providing and laying Vitrified tiles in floor with lean concrete of 600X600mm size. (thickness 10mm), with a water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in desired colours and shades, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, including grouting of joints. including preparation of 75mm thick base with concrete 1:4:8 Cement, complete as per Engineer -In -Charge. 20 Providing and fixing wash basin with C.l brackets, 15 mm C.P. brass pillar taps,32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets,cutting and making good the walls wherever require:White Vitreous China Wash basin size 550x400 mm witha pair of 15 mm C.P. brass pillar taps 21 Providing and fixing chlorinated Polyvinyl Chloride (CPVC)pipes, having thermal stability for hot & cold water supply,including all CPVC plain & brass threaded littings, includingfixing the pipe with clamps at 1.00 m spacing. This includesjointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Enineer in Charge 25 mm nominal dia Pipes 22 Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 qms.15 mm nominal bore 23 Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. (Siniex or Equivalent) 24 Boring with 100 mm diameter casing pipe for hand pump / tubewell, in all soils except ordinary hard rocks requiring blasting, including removing the casing pipe after the hand pump / tube well is lowered and tested :Beyond 12 m and up to 18 m depth 25 S.C.I. hand pump
