|
| 1 | Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removingthe excavatedmaterialuptoadistanceof50m.beyondthebuildingareaand stackingandspreadingas directed,dewatering,preparingthebedforthefoundationand necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5 m.) By Mechanical Means Bd.A.1 Page Number 259 |
| 2 | Providingsoling using80 mm sizetrap metal in 15 cm. layer includingfilling voidswithCrushed sand/grit, ramming, watering etc. complete. |
| 3 | Providing and laying Cast in situ/Ready Mix cement concrete in M-10 of trap/ granite/quartzite/ gneiss metal for foundation and bedding including bailing out water, Steelcentering,formwork, laying/pumping, compacting, roughening them if special finish is to be provided,finishingifrequiredand curingcomplete,withfullyautomaticmicroprocessor based PLC with SCADA enabled reversible Drum Typemixer/concreteBatchmixplant(Panmixer)etc.complete. Withfineaggregate(CrushedsandVSI Grade) Bd. E. 1 Page Number 287 |
| 4 | ProvidingandlayingCastinsitu/ReadyMixcementconcreteM-20 oftrap / granite /quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or asdirected including steel centering, formwork, cover blocks, laying/pumping, compactionand roughening thesurfaceifspecialfinishistobeprovidedand curingetc. complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushedsand VSI Grade) Bd.F.6 Page Number 300 and B.7, Page Number38 |
| 5 | Providing and laying Cast in situ/Ready Mix cement concrete in M-20 of trap/ granite/quartzite/ gneissmetalforR.C.C.pardiofrequiredthicknessincludingsteelcentering, formwork, cover blocks, laying/pumping, compacting , curing , finishing and rougheningthem ifspecialfinishistobeprovided andcuringcomplete.(Excludingreinforcementand structuralsteel).withfullyautomaticmicroprocessor basedPLCwithSCADAenabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) |
| 6 | Providing and laying Cast in situ/Ready Mixcement concrete M-20 of trap/ granite/ quartzite/ gneiss metal for R.C.C.chajjaasperdetaileddesignanddrawingsincludingsteelcentering,formwork,coverblocks, laying/pumping,compactingand rougheningthesurfaceif specialfinishistobeprovidedandcuring complete. (Excluding reinforcement and structural steel). withfullyautomaticmicroprocessorbasedPLC with SCADAenabled reversible DrumType mixer/ concrete Batch mix plant (Pan mixer) etc. complete.Withfineaggregate (Crushed sand VSI Grade) Bd.F.9 Page Number 303 and B.7, Page Number38 |
| 7 | Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels,chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings andschedules.including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. Bd.F.17, Page Number 306 |
| 8 | Providing secondclassBurntBrickmasonrywithconventional/I.S.typebricksincement mortar1:6 insuperstructureincludingstrikingjoints,rakingoutjoints,wateringand scaffolding etc. Complete Bd.G.5 Page Number 315 |
| 9 | Providingsandfacedplasterexternallyincementmortarusingapprovedscreenedsand,inallpositions including base coat of 15 mm thick in cement mortar 1:4 using waterproofingcompoundat 1Kilogramper cement bag curing the same for not less than 2 days and keeping thesurfaceofthebasecoat roughtoreceivethesandfacedtreatment6to8mm thickin cementmortar1:4finishingthesurface bytakingoutgrainsandcuringforfourteendays scaffolding etc.complete. Bd.L.7 Page Number 369 |
| 10 | Providing patti/ band150mm wide on plastered surface 12 mm to 15 mm thick in C.M. 1:3line andlevel including neat finishing scaffolding curing etc. complete. |
| 11 | Providing patti/ band150mm wide on plastered surface 12 mm to 15 mm thick in C.M. 1:3line andlevel including neat finishing scaffolding curing etc. complete. |
| 12 | Providing and laying in position flooring of telephone black / Amba White / Cat bary brown / Rubyred / OceanBrowngranite stone ofapprovedshade andsize 18 mm to 20mm thickon bed1:6cementmortar including cement floats striking joints, pointing in C.M. 1:3 curing and cleaning etc. complete. |
| 13 | Providing andfixing inposition(asper1868/1982)Aluminium sliding windowofthree tracks with rectangularpipe 95x38.10x0.90mm atweight0.637Kilogram/Running metre.withwindowframe bottom track section 92 x 31.75 x 1.30 mm at weight 1.070 Kilogram/Running metre.. Top and side track section 92 x 31.75 x 1.30 mm at weight 0.933 Kilogram/Runningmetre.Theshuttershouldbe ofbearingbottom40x18x1.25mmat weight 0.417Kilogram/Running metre.Inter locking section 40x 18x 1.10mm atweight 0.469Kilogram/Runningmetre.andhandleandtopsection40x18x1.25mm atweight o.417Kilogram/Runningmetre.Asperdetaileddrawingsandasdirectedby EngineerinchargewithallnecessaryAluminiumsectionsfixturesandfasteningssuchasrollerbearingin nylon casting and self locking catch fitted in vertical section of shutter including 5 mmthickplainglassand aluminiummosquitonetshutterwithstainlesssteeljailwithall required screws and nuts etc, complete. With powder coating with box |
| 14 | Providing and fixing rolling shutter fabricated from steel laths of minimum thickness 0.9 mm with lock plate of 3.15 mm thickness reinforced with 35 x 35 x 5 mm angle section fitted with sliding bolts and handles for both sides, deep M.S. channel section of depth and thickness not less than 65 mm and 3.15 mm respectively with hold fast arrangements, M.S. Bracket plate 300 x 300 x 3.15 mm minimum size and shape with square bar, suspension shaft of minimum 32 mm diameter, hood cover of M.S. sheet not less than 0.9 mm thickness and of any size at top and safety devices including mechanical gear operation arrangement consisting of worm gear wheels and worms of high grade cast iron or mild steel and one coat of red lead primer etc. complete. (I.S. 62481979) (Without mechanical gear) |
| 15 | Providing internal cement plaster 6 mm thick in a single coat in cement mortar 1:4 without neeru finish to concrete surface in all positions including scaffolding and curing etc. complete. |
| 16 | Providingfinecement finish 1.5mmthickover greenplaster surfaceincludingscaffoldingcuringetc. complete. As directed by Engineer in charge. |
| 17 | Providingandfixingonwalls/ceiling/floors20mmdia.heavygradehavingembossedasISIMark galvanised iron pipes of 1.93 Kilogram/meter with necessary fitting remaking good the demolishedportion andapplyingprimerofanti-corrosiveoilpaint,2coatsIncluding necessaryscaffoldingandremoving existingpipelineifnecessaryandconveyingand stacking the same in PWD chowky or as directed etc. complete.Bd.V.5 Page Number 551c |
| 18 | Providing and laying matt finish ceramic tiles of having size 30 cm x 30 cm confirming to I.S.15622/2006 (groupDII-A)and7to8mm thickforflooring inrequiredpositionlaidonabedof1:4cementmortar including cement float, filling joint with white/colour cement slurry cleaning curing etc. complete. Bd.M.12 Page Number 385. |
| 19 | Providingandlayingceramictilesof havingsize30cm.x30cm.andconfirmingto corresponding I.S. for dado and skirting in required position with readymade adhesive mortar of approved quality on plaster of 1:2 cement mortar including joint filling with white/ colour cement slurry cleaning curing etc. complete. Bd.M.13 Page Number 386. |
| 20 | Providing andapplying three coatsof waterproof cementpaint ofapprovedmanufacture andofapproved colourto newplasteredsurfacesincludingscaffoldingifnecessary,cleaningand preparingthesurface, watering for two days etc. complete. Spec.Number: Bd.O.8/Page Number 406 |
| 21 | Public Seating Chair. - 3 SeaterProviding andFixing 3 seater Public seating chair made of complete metal withLegs inCrome finishand seates in silver powder coating finish. |
| 22 | Removing rich mix cement concrete including stacking the spoils as directed with all leads, lifts etc, complete. As directed by Engineer in charge. |
| 23 | Supply & Application of Fire retardant Polish with Fire Retardant sealer field coat of approved make & one, two or three coats. Top Coat to provide class-I surface spread of flame as per BS:476 Part 6 & 7 and IS-12777 in clear shade including cleaning, injecting of fire retardent sealer and preparation of surface includingtransportationandcostofmaterial,necessaryscaffoldingwithalllead,lift,machinery& equipmentcharges,etc.completeasperinstructionsofEngineer-In-Charge/Manufacturers specification,3- Apply Two coats offireretardantclear solventbasedtop coat which specific gravity should be 0.97 in regular 4-6hour duration |
| 24 | Supplying hard murum/ kankar at the road site, including conveying and stacking complete. |
| 25 | Supplying trap/granite/quartzite/gneiss stone metal of required size by bringing the boulders / Rubble at the roadsidebreakingthemtorequiredgradationincludingconveyingtheboulders/Rubbleandstackingthe broken metal etc. complete . (Prior approval of sample stack of broken metal by the Ex. Engineer is necessary thedateofapprovalwillformpartofthemeasurements) a)40mmMetal,Bybreaking Boulders (Hand broken). As directed by Engineer-in-charge |
| 26 | Supplying soft murum at the road site, including conveying and stacking complete. |
| 27 | Spreading 80/40mmmetalforroadworkincludingsectionongetccompleteasdirectedbyEngineerin charge . As directed by Engineer-in-charge |
| 28 | Spreading hard murum/ soft murrum/ gravel or kankar for side width complete |
| 29 | Compactingthehardmurumsidewidthsincludinglayinginlayersoneachsidewithvibratoryroller including artificial watering etc. complete. |
| 30 | Compacting the sub grade / gravel / size metal (100 mm loose) layers for all widths with Power roller having weight 8 to 10 MT. including necessary, labour, materials and artificial watering complete. As directed by Engineer-in-charge |
| 31 | Providing and laying Cast in situ/Ready Mix cement concrete in M20 of trap/ granite/quartzite/gneissmetalforbedblocks,foundationblocksand suchotheritems includingbailing outwater, Steelcentering,formwork,laying/pumping,compacting, rougheningthemifspecialfinish is to be provided, finishing uneven and honeycombedsurfaceandcuringetc.complete.TheCement Mortar 1:3plaster is consideredfor rendering unevenandhoneycombedsurface only. Newly laid concrete shallbe coveredby gunnybag,plastic, tarpaulin etc. (Wooden centeringwill not beallowed.), with fully automatic microprocessorbasedPLCwithSCADAenabledreversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) Bd.E.4 Page Number 289 and B- 7, Page Number38 |
| 32 | Cutting transverse contraction joints 3 to 4 mm wide and depth 60mm. .in concrete slab using concrete cutting machinewithdiamondstuddedsawwithin48hoursofcastingofbay/slabetc.completeincluding subsequent widening of the groove 8 to 10 mm. wide at top having depth of 15 mm. as directed by Engineer incharge. MORTH 602.6.3 &602.6.4 |
| 33 | ROYALTY CHARGES :- Supply of Rubble, Murum, Soil, 60mm./40mm. metal (Hand broken), royalty charges are not included in the rates.[As per Govt. of Maharashtra, Revenue and Forest Departments Gazette No.146 Dt.04 June ,2021. States that the royalty charges ofRs.211.95/Cu.M. ) are considered. The surcharge levied on Royalty shall also be payable to the contractor. ROYALTY + 10% D.M.F. + 2% SURCHARGE |
| 34 | ROYALTY 2% SURCHARGE |
| 35 | Laboratory testing charges are not considered in the Rate Abstracts. Where ever required separate item shall be taken in the estimate for material testing charges, on the basis of testing frequency and charges fixed by Vigilance & Quality Control Circle, for the current year and shall form part of tender.testing of material by Quality control and certified quality must be use by contractor. CONCRETE Compressive Strength of C. C. Cube (Set of 3 Cubes) |
| 36 | PART II- ADD 18% GST |
| 37 | 0.50% FOR LABOUR INSURANCE |
