|
| 1 | Providing wood work in frames(popular wood) of false ceiling, partitions etc. sawn and fixed in position complete |
| 2 | Providing and fixing readymade Khatamband over 12mm thick plywood incl. joists of 2-2.5 inch sectionunder plywood for levelling and prepration of surface and polishing cost of nails, fixing charges etc complete as directed by engineer incharge. Chargull |
| 3 | Surface dressing of the ground including removing vegetation and in-equalities not exceeding 15 cm deep and disposal of rubbish, lead upto 50 m and lift upto 1.5 m in All kinds of soil. |
| 4 | Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directedAll kinds of soil : |
| 5 | Providing/Laying of stone soling nallah hand packed including all carriages complete. |
| 6 | Providing and laying in position cement concrete of specified grade including curing butexcluding the cost of centring and shuttering. All work upto plinth level with 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) incld all carriage complete |
| 7 | Providing and laying in position cement concrete of specified grade including curing butexcluding the cost of centring and shuttering. All work upto plinth level with 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) incld all carriage complete |
| 8 | Steel work in built up tubular (round, square or rectangular hollow tubes etc) truss etc incl cutting, hoisting, fixing in position and applying a priming coat of approved steel primer invl welding and bolt with special shaped washers etc complete |
| 9 | Steel work in built upsections, truss & framework steel work in builtup etc incl cutting, hoisting, fixing in position and applying a priming coat of approved steel primer invl welding and bolt with special shaped washers etc complete |
| 10 | Providing corrugated G. S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter withbitumen and G.I limpet washers or with G.I. limpet washers filled withwhite lead, including a coat of approved steel primer and two coats ofapproved paint on overlapping of sheets complete (upto any pitch inhorizontal/vertical or curved surface)excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.0.50 mm thick with zinc coating not less than 275 gram/m2 |
| 11 | Brick work with common burnt clay selected bricks of class designation 7.5 in exposed brick work including making horizontal and vertical grooves 10 mm wide 12 mm deep complete in cement mortar 1:6 (1 cement : 6 coarse sand) including curing complete in Above plinth levelWith Non Modular bricks incld: all carriages |
| 12 | P/F of ppr internal work incl cutting and making good thw walls wherever reqd. as per E-I-C. |
| 13 | 25mm Dia |
| 14 | 32 mm Dia |
| 15 | 40 mm Dia |
| 16 | Union 25 mm |
| 17 | Union 32 mm |
| 18 | Union 40 mm |
| 19 | P/F following C.P fittings C.P fittings of standard quality and approved make incld. All fixtures etc complete as per directions of engineer in Charge |
| 20 | Bib clock |
| 21 | Floor Trap |
| 22 | Mixer |
| 23 | angle valves |
| 24 | Providing & Fixingfollowing PVC (B Type) fittings ofapproved brand and quality as directed by engineer incharge all complete |
| 25 | Plain Bend 100 mm size |
| 26 | Door bend 100mm |
| 27 | Floor trap 100 mm |
| 28 | Multi Junction Floor Trap |
| 29 | Providing and fixing gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels Granite of any colour or shade 18mm thick |
| 30 | Stainless Steel Kitchen Sink 600x510x200mm of approved qaulity incld. All fittingcomplete |
| 31 | Providing and fixing 50 ltr capacity geyserapproved quality conforming to IS standards complte job (Venus/Jaquare/Havells . Recold) |
| 32 | Providing and placing on terrace (at all floor levels) polyethylene waterstorage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank |
| 33 | Providing /fixing of havells brand wring sockets ,plugs,fans,bulbs and all other acessories including cundit laying and supply wire etc complete as per directions of Engineer Incharge |
| 34 | Lighting point |
| 35 | Fans |
| 36 | Exhaust Fans |
| 37 | Steel work in built up tubular (round, square or rectangular hollow tubes etc) truss etc incl cutting, hoisting, fixing in position and applying a priming coat of approved steel primer invl welding and bolt with special shaped washers etc complete |
| 38 | Steel work in built upsections, truss & framework steel work in builtup etc incl cutting, hoisting, fixing in position and applying a priming coat of approved steel primer invl welding and bolt with special shaped washers etc complete |
| 39 | Centering and shuttering including strutting, propping etc. and removal of form work for: Founation footings etc |
| 40 | Supply installation of 1.5 hp motor pump of approved make |
