Tender For Spl Repair To Bldg No P 5 At Palampur Mil Stn; 1 Demolition of cement concreteunreinforced in ground floors, kota stone, granite flooring, tiles flooring andpavingsnot exceeding15cm thickness (below or above ground level) and removal unserviceable materials, debris and rubbish to a distance not exceeding 100m complete all as specified & directed. 2 S&F 1000 litres capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including fixing fittings such as GInipple for inlet, outlet, washout and overflow etc,including 25mm size ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe including dismantling old cemented/asbestos water/PVC storage tank complete all as specified and directed. 3 Taking down chowkats or frames with shutters (without taking off shutters from the frames) n. exc. 1.5 sq.m each complete all as specified and directed. 4 Taking down chowkats or frames but with shutters (with outtaking off shutter from the frames) exc 1.5 sq.m but n. exc 4 sq.meach, complete all as specified and directed. 5 Taking down shutter of any description exc 1 sq.m but n. exc 2 sq.m each. complete all as specified and directed. 6 S&F factory made Pressed steel frames of size 125mm x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc. and providing one shop coat of primer and taring back side of frame, complete all as specified and directed. 7 S&F factory made Pressed steel frames of size 105mm x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc.complete all as specified and directed. 8 M&L plain cement concrete 1:2:4 type B-1 using 20 mm graded stone aggregate cast in situ in lintels up to 1.5 m clear span, cills, steps, seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings up to 60 cm in height, copings, kneelers, apex stones, bed plates, water through and the like including weathering, slightly rounded or chamfered angles and throating including use of form work (straight or curved) complete all as specified & directed. 9 S&F 35mm thick factory made 2nd class hard wood rail and styleplain framed, panelled shutter with lock rail and panel of 9mm B.W.P commercial ply or 12mm veneered particle board withcommercial veneering on both faces. The size of rail and style as per IS:1003 (part 1) kiln seasoned and chemically pressure treated complete all as specified and directed. 10 S&F 35mm thick, 2nd class hard wood, factory made, glazed & skeleton shutters, open rebated and prepared to receive glass, gauze etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing glass etc. Sizes of members of shutters as specified in SSR Part I, Section 8, Clause 8.24 (a) complete all as specified and directed. 11 S&F steel window 1.25mm thick box type (Primer Coated) ERW hollow P section of size 60mm x 25mm single rebated comprises gauged/ glazed slelton shutter ERW sec 50mm X 20mm and 1mm thick with one or two openable leaf as directed consisting two nos sash bar of T-section 20mm X 3mm complete welded to frame with one vertical mullion of ERW box type T-section of size 30mm X 25mm and 1.25mm thick including 10mm square bar as in grill and coutting holes and making good dismantled portion in PCC (1:2:4) type B-1 four nos for each window including following fitting welded to frame shutter:-(i) Hold fast, 150mm long of 12mm X 3mm made to shape-04 nos per window (ii) Handle of Z sec 20mm X 25mm, 100mm long-1 no Per Leaf. (iii) MS tower bolt 150mmm long-2 nos per leaf. (iv) Z sec 29mm X25mm, 100mm long stopper-1 no per leaf. (v) Cleat 65mm long of hollow square 15mm X 20mm X 63mm welded to hinge-1 no per leaf. (vi) MS pintal hinges of size 75mm X 12mm -2 nos per leaf. 12 S&F factory made single extruded WPC (Wood Polymer composite) solid door/window/ ceosetory window & other frames/chowkhat of size 65x100mm comprising of virgen PVC polymer of K value 58-60 (Suspension grade) calcium carbonate and natural fibres (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 Kg/Cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in postion with MS hold fast/lungs/SS dash fasteners of required dia and length complete all as specified and directed. 13 S&F factory made single extruded WPC (Wood Polymer composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (suspension grade), calcium carbonate and natural fibres (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800N (face) & 900N (edge), minimum compressive strength 50 n/mm2 modulus of elasticity 850 n/mm2 and resistance to spread of flame of class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhessive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk SS screw, all as direction of Engineer-in-Charge. 14 M&L 50mm thick PCC 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) as in plinth protection etc. surface finished even and smooth without using extra cement and laid to a slope of 1 in 24 in alternative panels not exc. 1.20 sqm each, 12mmwide and 5 cms deep joints shall be formed between the bays and shall be filled with mastic filling comprising a mixture of one part of heated blown bitumen VG-10 and two parts of heated coarse sand (by volume) complete all as specified and directed.Note: The unit rate include for use of form work (straight or curved) 15 Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. 16 M&L non-skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exc. 0.11 sqm but not exc 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:6 in floors to received floor finishes complete all as specified and directed. 17 M&L Glazed ceramic coloured/white tiles in vertical surface 350mm x 250mm x 7mm/450mm x 350mm x 7mm/450x300x7mm/600x300x7mm thick set and jointed in neat cement slurry,pointed in white or coloured cement to match the colour of tiles, over and including 10mm thick backing coatin CM 1:4 to receive tiles,complete all as specified and directed. 18 M&L 25mm thick PCC 1:2:4 type B-1 (using 20mm thick crushed stone aggregate) as in floor finished even and rough to receive the topping layer complete all as specified and directed. 19 M&Lmachine cut kota stone slab flooring 20-25mm thick laid over cement screed base and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing (mirror face) complete over and including 15 mm thick screed in CM (1:6) complete all as specified and directed. 20 M&Lmachine cut kota stone slab 20-25mm thick in riser of steps,skirting,dado and pillar laid over cement screed base and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing (mirror face) complete over and including 10 mm thick backing coat in CM (1:4) complete all as specified and directed. 21 M&L makrana white marble tiles flooring 100mm wide and 18-20mm thick machine kut, over 15mm thick screed bed in CM 1:6, bedded jointed and pointed with grey cement slurry including cutting and polishing types, complete all as specified and directed.Note: Pattern of marble strip shall be approved by Engineer-in-Charge. 22 Hacking out old broken glasses (any thickness, size, quality or description) from wooden frames or steel frames, glazed with putty or fixed with wooden beads, complete all as specified. 23 S&F 3mm thick sheet glass, ordinary quality and glazing with oil putty in square n exc. 0.5 sq.m in each pane complete all as specified and as directed. 24 Dismantling expanded metal, any thickness or mesh, fixed with steel or wood fillets not exc 4 Kg complete all as specified and directed. 25 S&F galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperature 1.18mm and fixed with aluminium wire staples complete all as specified and directed. 26 S&F 100 mm size aluminium butt hinges,extruded aluminium alloy with galvanised mild steel hinge pin ,anodised, type B-21complete all as specified and directed. 27 S&F 150 mm size extruded aluminium alloy handles, cast type, anodised complete all as specified and directed. 28 S&F 150 mm size (length of bolt) aluminium anodised, barrel tower bolts of extruded sectioncomplete all as specified and directed 29 S&F 300mm long mild steel sliding door bolts, ordinary type, stove enamelled black, with bright bolts not less than 16mm dia with & including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate etc. complete all as specified and directed. 30 S&F brass door spring 250-300mm ordinary rat tail rod pattern spring including roller and roler plate complete all as specified and directed. 31 S&F PVC coated mild steel conduit pipe 25mm dia (Drapery rod) with PVC coated MS clamps to hold drapary rod and decorative attachment at one or both ends of drapary rod, fixed to opening of door/windows, each opening n exc 1.50 mtr, contained with a pair of clamps and ap pair of side ornamental attachments complete all as specified & directed. 32 Taking up or down 15mm bore steel water tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed. 33 Taking up or down 20mm bore steel water tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed. 34 S&F steel water tubing, 15 mm bore, galvanised , medium grade with all fittings and fixtures and short lengths, fixed to wall and ceiling or laid in floor including cutting chases for concealed work in required etc, complete all as specified and directed. 35 S&F steel water tubing, 20 mm bore, galvanised , medium grade with all fittings and fixtures and short lengths, fixed to wall and ceiling or laid in floor including cutting chases for concealed work in required etc, complete all as specified and directed. 36 S&F GI spout pipe 40mm dia long medium grade incl making holes in walls & making good disturbed surfaces complete all as specified and directed. 37 S&F PVC valve less, crystal white, syphonic action type flushing cistern 10 litres capacity, superior quality, plunger type, low level, with inlet, ball valve, float and handle, 32mm dia PVC long bend flush pipe 90 cm long with 15mm dia 450mm long PVC connection with CP brass coupling nuts and PVC washers at both ends fixed complete all as specified and directed. 38 S&F vitreous china ware squatting pan, Orissa pattern size 580mm x 440mm, crystal white, with cast iron P or S trap, front or back inlet, integral foot rest with provision of PCC 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) including making connections to trap and to flush pipe etc and making good to floors to match the existing complete all as specified and directed. 39 S&F vitreous china water closet pan (pedestal pattern), white including fixing botls etc including plastic water closet seat, black/white closed pattern with recessed bottom and cover and mild steel chromium plated hinging device complete all as specified and directed. 40 S&F CP jet spray hygenic spray set (health faucet) with 15mm dia 1 mtr long tube acrylic type complete all as specified and directed. 41 S&F vitreous china urinal, half stall type, complete including providing and fixing plugs, bedding urinal against in CM 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement, fixing automatic flushing cistern with brackets, flush pipe, grating and union for discharge pipe (inclusive of fixing supply pipe to flushing pipe, trap and waste pipe) complete all as specified and directed. 42 S&F 15mm bore angle valves, CP fancy type (ISI marked) two way screwed down, high pressure withcrutch or butterfly handle, screwed both ends (externally threaded) complete all as specified and directed. 43 S&F 15mm bore concealed type with wall flange, stop valves, cast copper alloy, fancy type chromium plated screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and directed. 44 S&F in repairs oval (of any colour as directed) counter wash basin of size 560x470x205mm including CP coupling and waste pipe complete all as specified and directed. 45 S&F CP swan neck type pillar taps fancy type 15mm bore cast alloy with capasten head screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly-nuts screwed complete all as specified and directed. 46 S&F fancy type, chromium plated, bib tap, cast copper alloy with crutch or butterfly handle, screwed down, screwed for 15 mm bore iron pipe or for brass ferrule complete all as specified & directed. 47 S&F brass chromium plated shower rose 125mm size, with or without swivel joints, including shower arm 15mm size, 195mm long with bend of 45 degree with flange of PTMT any colour, fixing to steel pipe or unioncomplete all as specified and directed. 48 S&F sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60cm long complete all asspecified and directed. 49 S&F brass chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and directed. 50 S&F PVC connection 15mm size, 450 mm long with PTMT nuts complete all as specified and directed. 51 Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for,complete all as specified and directed. 52 M&L PCC 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) as in cover slab, shelves and other similar work in CM 1:6 complete all as specified and directed. 53 S&F 600mm x 450mm bevellededge mirror of selected quality glass, mounted on 6mm thick AC plain building board or commercial ply wood and fixed to wooden plug with chromium plated brass screw and cup washers complete all as specified and directed. 54 S&F 20mm dia gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed. 55 Demolition ofbrickwork or stone/boulder masonry built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc but excluding ashlar facing, dressed stone work precast concrete articles complete all as specified and directed. 56 M&L brick work with sub class B bricks, straight or curved on plan exc 6 m mean radius built in Cement mortar 1:6, complete all as specified and directed. 57 Taking down cement or cement lime plaster, any description on brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water etc and removal of rubbish off the premises and leaving the work clear of any plastering complete all as specified & directed 58 Rendering 10mm thick plaster on brick or concrete surface or other than fair faces of brick masonry in CM 1:6, finished the surface even and smooth without using extra cement complete all as specified and directed. 59 M&L rendering 15mm thick plaster in CM 1:4 on brick masonry or concrete surfaces or other than fair faces of brick masonry finished even and smooth without using extra cement complete all as specified and directed. 60 Rendering 10mm thick plaster on ceiling in CM 1:3, finished the surface even and smooth without using extra cement complete all as specified and directed. 61 M&L preparation of newly plastered surfaces of wall and applying two coats of oil bound distemper over primer over and including plaster of paris putty 2mm to get uniform smooth surfaces complete all as specified and directed. 62 M&L preparation of newly plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed. 63 M&L preparation of old plastered surfaces of ceiling and applying two coats of white wash complete all as specified and directed. 64 M&L applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance dirt resistance exterior paint of required shade (company depot tinted) with silicon additives @ 1.43 litre/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm over new surfaces of wall complete including preparation of surfaces of walls by complete removal of existing treatment complete all as specified and directed. 65 M&L surface preparation and applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489: 2004, Alkali & fungal resistance dirt resistance exterior paint of required shade (company depot tinted) with siilcon additives @ 1.43 litre/10sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm over old surfaces of wall complete including preparation of surfaces of walls by complete removal of existing treatment complete all as specified and directed. 66 M&L preparation of old plastered surfaces of wall and applying two coats of oil bound distemper over primer over and including plaster of paris putty 1mm to get uniform smooth surfaces, including complete removal of existing treatment of wall surfaces complete all as specified and directed. 67 M&Lpreparing new surface of steel of any description, over 10cm width or girth not other wise described and applying two coats of synthetic enamel paint over a coat of red oxide, zinc chrome primer, complete all as specified and directed. 68 M&Lpreparing old surface of steel of any description, over 10cm width or girth not other wise described and applying two coats of synthetic enamel paint complete all as specified and directed. 69 M&L preparingof new wooden surfaces of any description not otherwise described over 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed. 70 M&L preparingof old wooden surfaces of any description not otherwise described over 10cm in width or girth and applying two coats of synthetic enamel paint complete all as specified and directed. 71 Dismantling CI/PVC pipe 75/100mm bore fixed to wall or laid in floor or trenches including connection complete all as specified and directed. 72 S&F 75mm bore PVC (SWR) pipesingle socketed, in any length with rubber ring joints fixed to walls/ laid in trenches or in floors, complete all as specified and directed. 73 S&F 110mm bore PVC (SWR) pipesingle socketed, in any length with rubber ring joints fixed to walls/ laid in trenches etc complete all as specified and directed. 74 S&F 75mm bore PVC (SWR) bends complete all as specified and directed. 75 S&F 75mm bore PVC (SWR) junction,(single T) with oval access door complete all as specified and directed. 76 S&F 110mm bore PVC (SWR) bends complete all as specified and directed. 77 S&F 110mm bore PVC (SWR) junction,(double T) with oval access door complete all as specified and directed. 78 S&F 75 mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed . 79 S&F 110mm dia PVC (SWR) vent cowl complete all as specified and directed. 80 M&L PCC 1:3:6 type C-2 (using 40mm graded crushed stone aggregate) as in surface channel and drains complete all as specified and directed. 81 M&L 20mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and the like in CM 1:4 including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed. 82 Taking down existing water proofing treatment (if any) including cleaning with wire brushes roughening the surface and hacking out dirt, where directed and disposal of rubbish not exc 50mm distance from the starting point complete all as specified and directed. 83 M&L 15mm thick (average) screed bed/plaster in cement mortar 1:4 in order to maintain proper slope and base over existing roof surface for laying of APP based polymeric membrane, mixed with water proofing compound as per manufacturers instructions finished even and smooth without using extra cement complete all as specified and directed.Note:- WPC and polymeric membrane shall be measured and paid separately) 84 M&L APP (Atactic poly-propylene polymer) modified membrane, five layered, 3mm thick weighing not less than 3.6 kg/sqm, having a centre core of polyester non-woven mat (FP) reinforcement dipped into APP modified mix and sealing all over laps 75mm on length side and 100mm on width side of membranes by torching as per manufacturers instructions by authorised applicator only after applying evenly a coat of bitumen VG-10 grade @ 1.20 Kg per sqm on the bottom of APP and on top of joints of APP complete all as specified and directed. 85 Supply only liquid water proofing compound complete all as specified and directed. 86 S&F mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. 87 M&L PCC 1:4:8 type D-2 (using 40mm crushed stone aggregate) as in foundation filling and mass concrete complete all as specified and directed. 88 M&L 75mm thick PCC 1:3:6 type C-2 (using 40mm graded crushed st one aggregate) as in sub base of floor complete all as specified and directed. 89 M&L 60 mm thick rubber moulded coloured machine pressed precast concreteinterlocking paver block any shape and size (shape as approved bt GE) laid in path,porch,hard standing or flooring etc conforming to IS-15658-2006, M-35 grade complete all as specified and directed . 90 M&L sand filling over floors or in foundation including watering and consolidation complete all as specified and directed. 91 Taking down carefully existing aluminum / copper point wiring (light, fan, socket or power point) complete of any description including fitting such as switches, ceiling roses, pendants, tube light fitting, ceiling fan with regulators, sockets, wooden boards, laminated sheets from sunken boxes, boards, shades light fitting etc and making good the disturbed surfaces of walls, floors, ceiling etc to match with existing surfaces complete all as specified and directed. 92 Taking down un-serviceable DB of any size and capacity including MCB etc, and removing materials to store for keeping in safe custody or for taking credit and making good disturbed surfaces of walls,floors, etc, complete all asspecified and directed. 93 Taking down un-serviceable sub main wiring of any type and any size from wall, ceiling etc. complete all as specified and directed. 94 M&L, concealed point wiring with PVC insulated and unsheathedelectric cable 1100 volts grade single core FRLSH confirming to IS 694:2010 having multi stranded copper conductor of 1.5 Sqmm nominal cross sectional area (ISI marked with valid CML No) drawn in and including concealed non metallic rigid PVC conduit medium grade( ISI marked with valid CML No)not less than 20 mm dia confirming to IS 14930 (Part-I) 2001,with all fitting and fixing accessories and1.5 Sqmm FRLSHPVC insulated unsheathed multistranded copper conductor cable as continuous earth conductor, connected to common earth dolly by providing suitable lugs with & including pressed steel sunken terminal boxes factory made for mounting switch, regulators etc with and including Modular white cover plate ISI marked, fixed with brass screws and cup washers duly painted with two coats of anti corrosive paint/black bituminous paint outside and two coats of aluminium paint insidefor mounting switches. sockets etccomplete all as specified and directed. 95 Description all as per serial item No 94 here-in-before but one 5pin, 6 Amp socket outlet on same boardcomplete all as specified and directed. 96 Description all as per serial item No 94 here-in-before but one 5pin, 6 Amp socket outletindependent complete all as specified and directed. 97 Description all as per serial item No 94 here-in-before but for one 5 pin socket outlet 16 Amps on independent board with cables 2.5 sqmm for phase and earth wire of size complete all as specified and directed. 98 All as per the description of serial item no 94 above controlled by two2-way switches, with cables 1.5sqmm size all as specified and directed. 99 S&F Modular Switch two way 6 Amp, one module 240 volts ISI marked complete all as specifiedand directed. 100 S&F Modular Switch one way 6 Amp, one module 240 volts ISI marked complete all as specifiedand directed. 101 S&FSocket, 6A - 2/3 pin combined 2 module, 240 volts ISI marked complete all as specified and directed. 102 S&F Socket 6A/16A - 2/3 pin combined 2 module, 240 volts ISI marked complete all as specified and directed. 103 S&F Modular switch 1 way 16 A, 1 module, 240 volts ISI marked complete all as specified and directed. 104 S&F Modular Fan step regulator, 120W 1 module, 240 volts ISI marked complete all as specified and directed. 105 S&F Modular white cover plate 8M complete all as specifiedand directed. 106 S&F Modular white cover plate 6M complete all as specifiedand directed. 107 S&F Modular white cover plate 3M complete all as specifiedand directed. 108 S&FSingle pole and neutral enclosure with 1 two pin and earth plug and a socket complete with one single pole MCB, 20 Amp, 240 volts ISI marked complete all as specifiedand directed. 109 S&Fceiling rose, 3 terminal surface type complete all as specifiedand directed. 110 S&Fangle lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittingscomplete all as specified and directed. 111 S&F Decorative ultra slim LED Tubelight fitting of LEDwith extruded polycarbonate, enviormental friendly energy efficient ready to use, 20 watt, 6500K fitting, incluing reqd length of not less than 1.0 Sqmm PVC multistranded BIS marked 03/02 core copper conductor forelectrical connection from ceiling rose to connector of LED fitting including testing on completion all as specified and directed. 112 S&F Decorative ultra slim LED Tubelight fitting of LEDwith extruded polycarbonate, enviormental friendly energy efficient ready to use, 10 watt, 6500K fitting, incluing reqd length of not less than 1.0 Sqmm PVC multistranded BIS marked 03/02 core copper conductor forelectrical connection from ceiling rose to connector of LED fitting including testing on completion all as specified and directed. 113 S&F street light bracket made out of 32 mm dia GI light grade tubing not less than 1.5 Mtr long bend to shape including pole clamps made out of 40 x 5 iron strip and nut bolts and washers, complete all as specified. 114 Supply and fixing LED street light fitting 50 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed. 115 M&L in replacement for sub main wiring with proper colour coding, insulated, unsheathed, multistranded, copper conductor FRLS, cable of 2 run 6 Sq mm for phase and neutral and one run of 10.0 Sq mm for earth wire unsheathed, multistranded, copper conductor FRLS, drawn through the medium grade ISI mark PVC concealed conduit fixed on wall. Two runs of cable for phase/neutral and one run of cable for earth will be measured and paid as one unit length complete all as specified and directed. Note : Wiring shall be done in proper colour coding. 116 S&F factory made CRCA sheet powder coated double door panel board 2mm thick, of size 114X78X16 cm, with Aluminium bus bar, wall mounted type partially grouted in wall with locking arrangement, handle and making good disturbed surface as well as matching with existing whitewash color/surface and including provn of following and connection all as specified and directed :-a) MCCB 125A, 4Pole 415 Volts, C series-01Nos (Incoming)b) MCB SP, 40A, 230 Volts-05 Nos (Outgoing for each DB and 1 common stair cae light point)sc) Fixing only existing old energy meter including connection complete all as specified and directed. 117 M&Ldistribution board sheet steel powder coated for MCB with rated bus bar and neutral link earthing stud SPN 8 way 240 volts double door complete all as specified and directed.Note:- Distribution board and MCBs should be same make. 118 S &F in replacementof SPN 40 Amp rating 240V, 10KA C curve miniature circuit breaker (MCB) current carrying capacity in the MCB DB complete with connection testing and commissioning complete all as specified and directed. 119 S&F in replacement 240V, 10 KA C curve miniature circuit breaker (MCB) of single poles and current carrying capacity 6 to 32 Amp, in the MCB DB complete with connection testing and commissioning complete all as specified and directed. 120 Earthing complete with galvanised iron earth plate electrode of size 600mm x 600mm x 6mm thick buried directly under ground vertically to a depth not less than 2.25 metre below ground level with top edge of the earth plate at a depth not less than 1.5 metre below ground level ,connected to galvanised earth lead wire 4.0mmby means of bolts, nuts, check nuts, washer including test point by means of bolts, nuts, check nuts, and washers of galvanized iron and connected to main switch / control board up to 7.5 metre away from earth electrodeand including GI pipe light grade 40mm bore protection pipe & necessary excavation and earth work in any strata, PCC chambers in PCC 1:3:6 type B1, RCC 1:2:4 type B1 cover slab 50mm thickwith 8mm dia TMT bars at 140mm C/C both ways,with lifting handle, watering pipe of GI medium grade 40mm dia, wire mesh, funnel, lugs and charcoal, salt etc all as applicable and as per plate No 3 of SSR Part-I and all as specified. 121 Disconnecting/ Taking down Ceiling Fan/ Exhaust fan of any sweep removing and cleaning the dust properly, painting with same colour good quality synthethic enemelled paint after preparing surface for painting with existing color shade oiling and greasing of bearing including refixing and making the conection and testingcomplete all as specified and directed. 122 M&L cutting and taking out old burnout winding of any sweep ceiling fan/Exhaust fan and rewinding with same gauge of copper winding wire of superior quality including insulation materials varnishing etc and testing complete all as specified and directed. 123 Disconnecting water heater and taking in safe custody/ refixing the same including fastner and making the conection and testingcomplete all as specified. 124 Supplying laying and testing cable XLPE insulated screened PVC bedded galvanised steel strip or wire armoured electric power cables (heavy duty) 1100 volta grade with stranded aluminium conductor of size 25 Sqmm , 3.5 core flatcable complete all as specified. 125 Excavation in trenches n exc 1.5 m wideand n exc 1.5 mtr in depth for foundation laying of under ground cable erecting of pole stay not exc 10 sqm on plain and not exc 1.5 m depth and getting out in any type of soil complete all as specified and directed. 126 Returning, filling in (soil ) including spreading, levelling, watering and well ramming in layers not exc 25cm in any type of soil complete all as specified and directed. 127 Removal ofexcavated material (soil) to a distance n exc. 50m and depositing where directed at a level n exc. 1.5m above the starting point complete all as specified and as directed. 128 M&L sand cushioning to under ground cable with a layer of sand 8cm before laying the cable and 15cm after laying the cable (10cm punned thickness above the top of the upper most cable, total 18 cm), complete all as specified and directed. 129 M&L for sub class ‘B’ brick old size protection cover laid dry flat transversally along the length of cable on cushioning with width equal to the length of brick complete all as specified and directed. 130 Material and labour for GI tubing (light grade) with all fitting laid in trenches or along pole/bldg or under road crossing and protection pipe or fixed alongwith wall/pole with necessary clamp nut bolt and washer bore of pipe 40mm complete all as specified and directed.
