Tender For Construction Of Fair Price Shopin Ward No 14In Kaveripakkam Town Panchayat; 1 Earth work excavation for foundation in all kinds of soils and sub soils to full depth as directed by the departmental officers except hard rockinclusive of shoring strutting and balling out water wherever necessary and refilling the sides of foundation with excavated earth in layers of 15cm thick well rammed and consolidated and depositing the surplus earth with in the compound in places shown by the departmental officers with initial lead of 10 meters and initial lift of 2 meters including cost of all labour charges etc., complete as per standard specification 23 & 24VI (S2) VII.9,10 2 Fillig with good dry m-sand including cost and conveyence to site and labour charges for filling watering tampaing etc, complete 3 Cement concrete in 1:4:8 [one cement and four sand andeight aggregate ] using40 mm size ISS grade machine crushed chips including the cost of mixinglaying curing etc., complete complying with standard specification. 4 Supplying, fabricating and placing in position of Steel Reinforcement using TMT steel rods, for all RCC worksas per the design given by the departmental officers including cost of steel and binding wire and all labour charges for cutting, bending, tying and placing in position etc, complete as per standard specifications. 5 Providing and laying in position Standardised Concrete Mix M-20 Grade in accordance with IS 456 - 2000 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement contenet of 325Kg/ cum and maximum water cement ratio of 0.55 including admixture (Plasticiser / super plasticiser) in recommended proportions as per IS 9103 to accelerate, related setting of concrete, improve workability without imparing strength and durability with about (5.0cum), 7730Kg of 20mm machine crushed stone jelly and with about (3.3 cum), 5156kg of 10 - 12mm machine crushed stone jelly and with about (4.79cum) 7670 kg of Crushed Stone Sand (M- Sand), but excluding cost of reinforcement grill and fabricating charges centering and shuttering but including laying, vibrating with mechanical vibrators, finishing, curing, etc and providing fixtures like fan clamps in the RCC floor / roof slabs wherever necessary without claiming extra cost etc., complete complying with standard specification and as directed by the departmental officers - 6 Supplying and Erecting Steel Centering for sides andsoffits including supports and strutting upto3.29 m height for planesurfaces such as RCC Slabs, Rectangular Beams, TEE or ELL Beams, Lintels, Bed blocks, Staircase waist and Landing slabs, Landing Beams, canopyetc., with all cross brasingsusing mild steelsheets of size 90cmx60cm and 10 gauge stiffenedwithwelded MS anglesof size 25mmx25mmx3mm for boardinglaid over silver oak (CW) joists of size 10cmx6.5 cm spaced at about90cm c/c and supported by causrina props of 10cm to 13cm dia spaced at 75cm c/cetc., complete complying with standard specification and as Directed . 7 For Column 8 For Plinth beam 9 For Beam and Roof slab 10 Suppling and fabricating and placing in position MS(or) R.T.S. bar for reinforcement to all RCC works as per the design given including cost ofsteel and binding wire also in all floors. 11 Brick work in CM 1:5 (one cement & five sand) using II class ground moulded bricks of size 9X43/8X 2 3/4 including finishing, curing, etc., complete complying with standard specification.- 12 In Foundation and basement 13 For Superstructure 14 Collection Supply and Filling ofwell gravel from approved quarry including cost and conveyance of all materials to site, loading and unloading charges and slacking the same to site to departmental gauge and filling to required depth, well rammed etc., Complete as per standard Specification 15 Supply and fixing of 50mm thick RCC precast 1200mm dia. Collar, including cost and coveyance and all labour charges etc. 16 Supplying and fixing fine polished cuddapah slab of following thickness for cup-board arrangements including laying to correct alignment with necessary cement mortar and black powder etc, complete complying with standard specification and as direct. 17 SupplyingandFixingofPush and Pull type RollingShutter confirming to IS 6248/1979 and as amended from time to time. With ISI make of approved size and section using 18 gauge G.I.sheet. The Shutter shall be painted with one coat of red oxide primer and the rate is inclusive of hood covers, transportation charges etc., and as directed by Engineer incharge. S.OR. TWAD 110.0 18 Supply and fabricarion ofM.S. ornamental iron grill for Windows and Ventilaters including cost of angles, plates, sheets, fabrication charges, cost of hold fast,with locking arrangements and transportation charges etc., complete as per Departmental Instructions. 19 supply and fixing of 4 mm thick Glass for Ventilator, Inculuding cost of glass all labour charges eetc., complete as per Departmental instructions 20 Special ceiling plastering in cement mortar 1:3 mix 10mm thick using clean screened sand and including cost of curing for fifteen days from the completion of thework and surface should free from undulationsand including the cost of preparing the surface for plastering and protecting for plastering for plastering and protecting from other damages till setting of mortaretc.complete complying with standard specification 21 Plastering in cement mortar 1:5 mix 12mm thick using clean screened sand and including cost of curing for fifteen days from the completion of thework and surface should free from undulationsand including the cost of preparing the surface for plastering and protecting for plastering for plastering and protecting from other damages till setting of mortaretc.complete complying with standard specification 22 Paving the floor with best approved quality polished Rajasthan Kota stone slabs of size 600 x 600 of 20mm thick with machine cut edges and matching marble slab not less than 100mm width other than Adanga Marbles as border laid over a cement mortar bed of 20mm thick using cement mortar 1:3 (One cement and three sand) fixing the slabs in true right angles with minimum possible width of joints and pointing the joints with white cement mixed with mathcing colouring pigments and polishing with floor polisher to a high degree of finish etc., The kota stone slabs and other materials to be used shall be got approved by the Executive Engineer concerned before use on work, etc., complete as per standard speicification. 23 Supply and delivery of following item of materials with ISI mark 24 a).90 mm OD PVC Pipe 6ksc 25 b). 90 mm OD PVC Elbow 26 c).63mm OD PVC Pipe 6ksc 27 d).63mm OD PVC Vent Cowl 28 Painting new iron works such as steel doors, windows, ventilators, window bars, balustrades etc., with two coats of best approved first quality and colour of synthetic enamel paint over the existing red oxide priming coat in all floors excluding cost of priming coat etc., complete complying with standard specification. 29 White washing two coats with freshly burnt white shell lime in all floors including cost of lime, blue powder fevicol type gum, brushes, scaffolding charges, etc., complete complying with standard specification and as directed. 30 Painting two coats of newly plastered wall surface with ready mixed Exterior emulsion paint of first class quality and of approved colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification. 31 Wiring with 2x1.5 sqmm(22/0.3) PVC insulated unsheathed Sc Cu.Conductor of 1100v grade in suitable PVC rigid Pipe on Wall and celling with PVC accessories with TW switch box with 5A F.T switch infulsh with wall, covered with hylem sheet of 3MM thick with painting of suitable colour for Concealed PVC light point/fan point(for electronic regulator).S.D : 25 32 Wiring with 2 x 1.5 sq.mm PVC insulated SC unsheathed FRLS copper conductor of 1100V grade in suitable PVC rigidpipe on wall and ceiling with PVC accessories with 150 x 100 x 113mm TW switch box for 5A 3 pin non inter lockingWall socket with 5A flush type switch with painting of suitable colour with continuous earth wire connection of 1.5sq.mm copper wire for open PVC plug point.S.D 36 33 Supply and fixing of 1200mm(48) sweep AC ceiling fan complete with stepped electronic 300W regulator with 300mm down rod on the existing clamp SD 110. 34 Supply and fixing of Single box type 440 w LED fitting complete with copper Chokes and condenser with TW round blocks on wall or ceiling with flu tube with PVC unsheathed copper leads from the terminals to the fittingSD442 35 18 w LED 36 Supply and run of 2x4 sqm PVC insulated SC unthethd Cu.conductor of 1100V grade on 7/20 GI bearer wire for over Head service connection mainsS.D 64 37 Supply and run of 2x4 sqm PVC insulated SC unthethd Cu.conductor of 1100V grade in 25mm dia. GI pipe ( class B ) bend at both ends with necessary angle iron up right and end supports mains S.D 69 38 Supply and fixing of fancy glass shade WT BH point for 15W with ISI mark., SD.80 39 Earthing as per PWD standard with an earth electrode of 2 metre Class B GI pipe of dia not less than 32mm completewith necessary masonry work SD 212 40 Supply and fixing of 8 way single pole and neutral MCB sheet steel enclosure Distribution board 1No 32 Amps DB MCB as incoming and 6 Nos 6 Amps to 32 Amps SPMCB outgoing in flush with wall and making good of the concealed portion with earth connection only. The MCB DB and MCBs should be with ISI mark SD 514
