Tender For Essential Services And Allied Works At Staff Quarters In Kasturba Hospital.- 1 Providing and+C9:C18 fixing in position three track aluminum window of extruded modular and anodized aluminum sections of approved make and of size 92 mm x 45.5 mm x 1.5 mm thk (wt 1.659 kg/Rm) for bottom and 92 mm x 31.75 mm x 1.3 mm thk. (wt 0.933 kg/Rm) for top and sides mounted on anodized aluminum rectangular frame of size 100mm x 40mm x 1.3mm.(Wt 0.976 kg/m) The shutter comprising of bearing bottom and top of size 40mm x 18 mm x 1.25 mm thk (wt. 0.417 Kg/Rm) Interlocking section of size 40mm x 26.7 mm x 1.10 mm thk. (Wt. 0.469 kg./Rm) and hand sides of 40mm x 18mm x 1.25 mm thk (wt. 0.417kg/Rm) with 5 mm thick plain / frosted / tinted glass fixed in shutter including approved quality neoprene gasket, fixtures, fastenings and accessories like PVC rollers, PVC weep holes, locks, handles etc. complete as directed by Engineer In Charge. (Note: anodic film must not be less than 15 microns i.e. AC-15 as per IS, the anodizing must be scaleted by keeping the anodized section in boiling de-anodized water for a period of one hour) 2 Providing & fixing in position single leaf flush door of required size for internal doors of residential units, shutters made of 45mm thickmarine grade block board core with 25mm x 45mm T.W. lippingpatti, 1mm thick approved decorative laminates finish on both faces ofshutter, including providing & fixing T.W. frame of 60mm x 150mm size,coating all the exposed surfaces of wood with 2 coats of flat enamel paint of approved shade & make over one coat of approved synthetic primer, coating all the surfaces of wood in contact withmasonary with Tar (Black Japan), preparing the surfaces, providing and fixing brass chrome finished or S.S. fittings and fastenings etc complete as per detailed drawing no. WD-26 & as directed by the Engineer in charge. D5,D7,D12,D8,D9,GL-D5 3 63 Amp. 415V DP Switchfuse unit with CRCA sheet steel powder coated enclosure with rewirable fuses 4 63A DP MCB 5 32A SP MCB 6 25A SP MCB 7 1st category Cu armoured cables FRLS outer sheathed- 2C x 6 Sq.mm 8 1st category Cu armoured cables FRLS outer sheathed- 2C x 2.5 Sq.mm 9 1st category Cu armoured cables FRLS outer sheathed-2C x 1.5 Sq.mm 10 Light /Fan / Ex. fan Points with Modular switches & FRLSH wires 11 3/5 Pin Independent Plug (IP) with Modular switches & FRLSH wires 12 5A/6A - 3/5 Half Plug with Modular switches & FRLSH wires 13 15 / 5A / 6A Combined Power Plug Socket Point with Fuse and indicating Lamp, One 15 Amp SP Switch 14 Bell Point with Bell / Buzzer & 1 Bell Push Concealed Manner with Modular switches & FRLSH wires 15 Ceiling fan of 1200 mm sweep with all accessories including Electronic Regulator for completing installation 16 Ceiling fan of 600 mm sweep with all accessories including Electronic Regulator for completing installation 17 Fan safety rope/ Fan wire. Nos 18 Supply and fixing of Step type Electronic Fan Regulator minimum rated for 100W 19 S type M.S. fan hook fabricated from suitable dia. M.S. rod duly painted for fixing of ceiling fan. The S type hook shall be fixed to steel bar in RCC ceiling. The ceiling shall be replastered with sand, cement & neeru etc. The cost of labours for chipping out ceiling upto steel bar & fixing of S hook & resurfacing the ceiling is included in the cost of item. 20 Wall mounting fan of 400mm sweep, 230 Volts,AC 50 Hz, oscillating type complete with all necessary accessories for completing installation. 21 Storage type Horizontal / vertical water heater 3 Liters capacity on wall / loft as per specification. 22 Providing and fixing the both face polished natural stone as specified below for shelf including making the slots for support, cutting, jointing in approved adhesives or any other approved means, filling the joints with neat cement motar with neat smooth plastering as required etc. complete as directed by Engineer-In-Charge.: 25 to 30mm thk. Kadappa 23 White Vitreous china Orissa pattern W.C. pan of size 580x440mm with integral type foot rests. 24 W.C. pan with ISI marked white solid plastic seat and lid 25 510x1040 mm bowl depth 200mm 26 Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete: 32mm dia 27 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot &cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.25 mm nominal outer dia Pipes 28 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement ,trenching ,refilling & testing of joints complete as per direction of Engineer in Charge.32 mm nominal outer dia Pipes 29 Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931.: 15 mm nominal bore 30 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement ,trenching ,refilling & testing of joints complete as per direction of Engineer in Charge.: 100 mm nominal inner dia Pipes 31 Providing anti termite treatment conforming to IS- 6313 (part-III) to the sides of flooring of the Existing building by punching/ drilling the holes of 16 mm dia at a distance of 300mm centre to centre and injecting 150 ml untill refusal or to a maximum of 1 Lit. per hole with chloropyrifos EC 20 Emulsion or equivalent of 1%concentration by weight, sealing the hole by filling the putty etc. complete as directed by Engineer-In-Charge with 2 years guaranty. 32 Providing anti termite treatment conforming to IS- 6313 (part-III) to the wooden frames of doors / windows of the Existing building by drilling the 3 mm dia. holes at 150mm c/c and at the junction of wood work and masonry work to downward angle of 45 degree and injecting 500 ml per hole or until refusal with oil / kerosene based chloropyrifos EC 20 emulsion or equivalent of 1% concentrate, sealing the holes by filling the putty etc complete as directed by Engineer-In-Charge with 2 years guaranty 33 Light coloured antiskid / matt vitrified tiles 34 Providing and fixing 20mm thick Mangalore tiles of approved make as roofincluding fixing in cement mortar (1:3) with necessary vatas and cement pointing, coloured with red or dammering etc. complete as directed. 35 Providing & laying on roof 20mm thick Mangalore tile ridge caps and /or hip sets on existing wooden or steel frame structure including fixing in cement mortar (1:3) with necessary vatas and cement pointing, coloured with red or dammering, etc complete as directed. 36 Providing and fixing country teak wood battens 50 mmx25 mm and placed about 250 mm C/C etc complete, as directed 37 Bare Galvalume/zincalume sheets for roofing
