}

Tender For Proj No.565- Construction Of Room For Cleaning Staffs - General-24-25 Tripunithura Municipality Proj No.565-Construction Of Room For Cleaning Staffs -General Civil Work Sl. No. Item Description 1 Maintenance 2 15.28.1:Dismantling Roofin, Ernakulam-Kerala

Local Self Government Department has published Tender For Proj No.565- Construction Of Room For Cleaning Staffs - General-24-25 Tripunithura Municipality Proj No.565-Construction Of Room For Cleaning Staffs -General Civil Work Sl. No. Item Description 1 Maintenance 2 15.28.1:Dismantling Roofin. Submission Date for this Tender is 12-03-2025. Building Work Tenders in Ernakulam Kerala. Bidders can get complete Tender details and download the document.




Tender Notice

48106128
Tender For Proj No.565- Construction Of Room For Cleaning Staffs - General-24-25 Tripunithura Municipality Proj No.565-Construction Of Room For Cleaning Staffs -General Civil Work Sl. No. Item Description 1 Maintenance 2 15.28.1:Dismantling Roofin
Open Tender
Indian
Kerala
Ernakulam
12-03-2025

Tender Details

Tender For Proj No.565- Construction Of Room For Cleaning Staffs - GENERAL-24-25 TRIPUNITHURA MUNICIPALITY PROJ NO.565-CONSTRUCTION OF ROOM FOR CLEANING STAFFS -General Civil Work Sl. No. Item Description 1 MAINTENANCE 2 15.28.1:Dismantling roofing including ridges, hips, velleys and gutters etc., and stacking the material within 50 metres lead of :G.S. Sheet 3 10.16.1:Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes 4 OD487077/2024-2025:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.35 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 5 OD487081/2024-2025:200mm wide uPVC square rain water gutter,UPVC qutter clamp,UPVC end cap,joints etc 6 OD487084/2024-2025:Supplying and fixing 75mm dia PVC pipe for the down water (4kg/cm2) 7 OD487085/2024-2025:Providing and fixing steel bib cock of approved quantity conforming to IS: 8931 8 14.43:Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. 9 14.53.1:Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade:One or more coats on old work 10 13.52.1:Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturers specifications including appropriate priming coat, preparation of surface, etc. complete.On steel work 11 16.83:Taking out existing CC interlocking paver blocks from footpath/ central verge, including removal of rubbish etc., disposal of unserviceable material to the dumping ground, for which payment shall be made separately and stacking of serviceable material within 50 metre lead as per direction of Engineer-in-Charge. 12 16.84:Laying old cement concrete interlocking paver blocks of any design/ shape laid in required line, level, curvature, colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge. (Old CC paver blocks shall be supplied by the department free of cost.) 13 OD490423/2024-2025:Providing and laying 60 mm thick factory made cement concrete interlocking paverblock of M - 30 grade made by block making machine with strong vibratory compaction, of approved size,design & shape, laid in required colour and pattern over and including 50 mm thick compacted bed of stoneaggregate, etc. all complete as per the direction of Engineer-in-charge. 14 4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size) 15 OD487078/2024-2025:Engaging man coolies

Key Value

Document Fees
INR 660 /-
EMD
INR 4232.0 /-
Tender Value
INR 1.69 Lakhs /-
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail