Construction Of Institute Of Driver Training And Research, Village Ghaink, Jammu Scope Of Work Teaching And Training Equipment Classroom With All Necessary Equipment And Furniture , Training Chairs With Deskletseat/Back Assembly:The Seat Is Injection Moulded In Glass Filled Polypropylene Compound Which Is Upholstered With Fabric Upholstery Covers And Moulded Polyurethane Foam.The Back Is Injection Moulded In Glass Filled Polypropylene Compound Which Is Upholstered With.Mesh Fabric (Refer Colour Chart For Seat & Back Upholestry In Product Catalog).Width (W): 59.0 Cm.Depth (D): 76.0 Cm.Height (H): 86.5 Cm.Seat Height (Sh): 46.0 Cm.High Resilience (Hr) Polyurethane Foam: The Hr Polyurethane Seat Foam Is Moulded With Density 45±2 Kg/M³ And Hardness 16±2 Kgf As Per Is:7888 For 25% Compression.M.S. Powder Coated Frames For 4 Leg Chairs :The Powder Coated (Dft 50±10 Microns) Welded Tubular Main Frame Is Made From Ø 2.54 ± 0.03 Cm X 0.2 ± 0.016 Cm And Ø1.6±0.3Mm X 0.16 ± 0.0128Cm M.S. E.R.W Tube.The Ø1.9 ±0.3Mm X 0.12 ±0.0096 Cm M.S.E.R.W Tube Used As Connecting Member Between Lh & Rh Frames.Desklet Support Frame Is Made From Ø 2.22 ± 0.03 Cm X 0.16 ± 0.0128 Cm And Welded To Main Frame M.S Powder Coated Frames For Sled Base Chairs :The Powder Coated (Dft 50±10 Microns) Welded Tubular Main Frame Is Made From Ø 2.54 ± 0.03 Cm X 0.2 ± 0.016 Cm And Ø1.9 ±0.3Mm X 0.12 ±0.0096 Cm M.S.E.R.W. Tube.Shoe :The Shoes Are Made Of Glass Filled Polypropylene Compound With And Pressed Fitted With Tubular Frame.Felt Is Provided Below The Shoes.Armrest:The Armrest Are Made Of Glass Filled Polypropylene Compound And Assembled Over The Tubular Frame.Quarter Desklet: The L Shape Desklet Is Made Of 1.8 ±0.05Cm Thk. Pre-Laminated Particle Board With 0.2 ± 0.05Cm Thk Injection Moulded Polypropylene All Around.Desklet Has Front And Back Adjustment Of 8.0 Cm ± 0.5 Cm.Outer Dimension: 31.5±0.1Cm. (W) X 47.0±0.1Cm. (D).Twin Wheel Castors: The Twin Wheel Castors Are Injection Moulded In Black Poly Amide. , Tables For Instructoroverall Size Of The Table Shall Be (1200 W X 600 D X 750 H) Mm Work Surface Made Of 25Mm Thick Pre-Laminated Twin Board Of E1-P2 Grade And Approved Shade Confirming To Is-12823:1990, Edge Banded With Matching 2 Mm Thick Pvc Lipping.Gromet Provided On Work Surface For Wire Management.Modesty Panel Made Of 25Mm Thick Pre-Laminated Twin Board Of E1-P2 Grade And Approved Shade Confirming To Is-12823:1990, Edge Banded With Matching 2 Mm Thick Pvc Lipping.Under-Structure Made Of 25Mm Thick Pre-Laminated Twin Board Of E1-P2 Grade And Approved Shade Confirming To Is-12823:1990, Edge Banded With Matching 2 Mm Thick Pvc Lipping.Hinge Door Storage Made Of 25Mm Thick Pre-Laminated Twin Board Of E1-P2 Grade And Approved Shade Confirming To Is-12823:1990, Edge Banded With Matching 2 Mm Thick Pvc Lipping.Handle Is Provided For Ease Of Opening.Storage Is Provided With Cam Lock For Security.Main Desk With Gromet Cut-Out And Cap.Hdu On Lh/Rh For Storage.Colors: Valigny Oak (Laminate) And Black (Laminate). , Chairs For Instructorseat Assembly: The Seat Assembly Should Be Made Up Of 1.2 ±0.1Cm. Thick Hot-Pressed Plywood , Upholstered With Fabric Upholstery Covers And Moulded Polyurethane Foam.Seat Size: 47.0 Cm (W) X 48.0 Cm (D).Back Assembly:The Back Asembly Should Be Made Of Powder Coated (Oft 40-60 Microns) Tubular Frame Of 0 2.54 ±0.03Cm. X 0.2 ±0.016Cm.Thk. M.S.E.R.W Tube Designed With Contoured Lumbar Support For Extra Comfort.The Back Should Be Upholstered Using Double Layer Spacer Mesh Fabric With High Tenacity Yarn.Back Size : 46.5 Cm (W) X 60.5 Cm (H).High Resilience (Hr) Polyurethane Foam:The Hr Polyurethane Foam Should Bemoulded With Density =45+/-2 Kg/M3 And Hardness Load 16 ± 2 Kgffor 25% Compression.Armrests: The One-Piece Armrests Should Be Injection Moulded From Black Co-Polymer Polypropylene. Centre-Tilt Mechanism: The Mechashould Be M Should Bedesigned With The Following Features :- 360° Revolving Type.17° ±2° Maximum Tilt On Pivot At Centre.Upright Position Locking.Tilt Tension Adjustment.Pneumatic Height Adjustment:The Pneumatic Height Adjustment Has An Adjustment Stroke Of 11.0 ±0.3Cm.Telescopic Bellow Assy: The Bellow Should Be 3 Piece Telescopic Type And Injection Moulded In Black Polypropylene.Pedestal Assembly: The Pedestal Should Be Injection Moulded In Black 33% Glass-Filled Nylon66 And Fitted With 5 Nos. Twin Wheel Castors.The Pedestal Should Be66.3 ±0.5Cm. Pitch-Center Dia.(76.3 ±1.0Cm With Castors).Twin Wheel Castors:The Twin Wheel Castors Should Be Injection Moulded In Black Nylon. , Executive L-Shape Tableoverall Size Of The Table Shall Be (1200 Width X 600 Depth X 750 Height).The Top Shall Be In White Cedar And Black And Shall Be 18 Mm Plb With Pvc Lipping.The Side Panels Shall Be 18 Mm Thickplt With Pvc.The Modesty Panel Shall Be 18 Mm Thick Plt.The Modesty Panel Shall Be In A Combination Of Black & White Cedar.Table Pedestal Size Shall Be (390 Width X 435 Depth X 529 Height).The Top Is 18 Mm Thick Plb.The Two Drawer Mobile Pedestal Is Available In One Size.The Top And Drawer Fronts Shall Be In White Cedar While The Other Components Shall Be In Black.Top 18 Mm Plb With Pvc Lipping , Side Panel 18 Mm Thick Plt With Pvc , Modesty Panel 18 Mm Thick Plt.Table Eru Size Shall Be (1200 Width X 450 Depth X 750 Height).The Top Of Eru Shall Be 18 Mm Thick Plt With Pvc Lipping.The Feature Of Eru Shall Be Thait Is Common For Both Lhs Nd Rhs. The Colour Of Eru Top Shall Be White Cedar , Side Panels Shall Be In Black And The Modesty Panel Shall Be A Combination Of Black & White Colour. , Mesh High Back Revolving Chair Seat Assembly:The Seat Is Made Up Of 1.5 ± 0.1 Cm Thick Hot - Pressed Plywood Upholstered With Fabric And Moulded Polyurethane Foam.Seat Size: 51.8Cm (W) X 49.7Cm (D).Back Assembly: The Back Is Injection Moulded In Glass Filled Nylon Which Is Upholstered With Mesh Fabric.The Back Consist Of Adjustable Lumbar Support Made Of Injection Moulded Polypropylene Having An Adjustment Of 5.0 ±0.1 Cm.Back Size: 47.9 Cm(W) X 66.9 Cm (H).High Resilience (Hr) Polyurethane Foam: The Hr Polyurethane Seat Foam Is Moulded With Density 45+/-2 Kg/M³ And Hardness 14 ± 2 Kgf As Per Is:7888 For 25% Compression.Armrests (Adjustable) :The Height Adjustable Armrest Is Made Of Polypropylene And Can Be Adjusted To 6.0±0.1Cm Height.It Also Has Swivel And To And Fro Adjustment With Moulded Pu Armtop.Active Bio-Synchro Mechanism: The Adjustable Tilting Mechanism Is Designed With The Following Features :- 360° Revolving Type.Front-Pivot For Tilt With Feet Resting On Ground & Continuous Lumber Support Ensuring More Comfort.Tilt Tension Adjustment Can Be Operated In Seating Position.5 Position Tilt Limiter Giving Option Of Variable Tilt Angle To The Chair.Seat / Back Tilting Ratio Of 1:2.The Mechanism Housing Is Made Up Of Hpdc Aluminium & Black Powder Coated (Dft 40 To 60 Micron).Headrest: The Headrest Sub-Assembly Is Made Up Of Injection Moulded Glass Filled Polypropylene Which Is Upholstered With Moulded Hr Polyurethane Foam And Fabric. It Has An Adjustment Of 3.0 ± 0.1Cm & It Is Assembled Over Full Back Chair.The Complete Headrest Assembly Is Retro Fit To The Main Chair. , Mesh Visitor Chairs Seat Assembly:The Seat Assembly Should Be Made Up Of 1.2 ±0.1Cm Thick Hot-Pressed Plywood , Upholstered With Fabric Upholstery Covers And Moulded Polyurethane Foam.Seat Size: 47.0 Cm (W) X 48.0 Cm (D).Back Assembly: The Back Asembly. Should Be Made Of Powder Coated (Dft 40-60 Microns) Tubular Frame Of 0 2.54 ±0.03Cm. X 0.2 ±0.016Cm.Thk. Mserw Tube Designed With Contoured Lumbar Support For Extra Comfort.The Back Should Be Upholstered Using Double Layer Spacer Mesh Fabric With High Tenacity Yarn.Back Size : 46.5 Cm. (W) X 60.5Cm. (H).High Resilience (Hr) Polyurethane Foam: The Hr Polyurethane Foam Should Bemoulded With Density =45+/-2 Kg/M3 And Hardness Load 16 ± 2 Kgffor 25% Compression.Armrests: The One-Piece Armrests Should Be Injection Moulded From Black Co-Polymer Polypropylene.Tubular Frame: The Powder Coated (Dft 40-60.Microns) Tubular Frame Should Be Cantilever Type & Made Of Ø2.54 ±0.03Cm. X 0.2 ±0.016Cm Thick M.S.E.R.W. Tube.Fixed Pp Arms,Tubular Frame Structure. , Leathrite 3 Seater Sofaoverall Dimension Of The 3 Seater Shall Be (176.5 W X 83.5 H X 81.5 D Cm) Enerous Lumbar Support.The Sofa Offers Generous Lumbar Support, Which Engulfs Your Entire Back Area. This Helps Your Back Receive Optimum Support And Gives You A Comfortable Seating Experience.Elevated From The Ground Elevation Of The Sofa Facilitates Easy Cleaning Underneath The Sofa.It Also Makes It Easy To Access Objects That Have Accidentally Rolled Under. Synthetic Leather Upholstery : It Features A Synthetic Leather Upholstery, Giving It A Smooth And Rich Finish. You Can Easily Clean The Surface, As It Does Not Let Dust Accumulate.Soft Foam With Recron Filler.The Mattress Is Made From Soft Foam, Increasing The Level Of Comfort It Provides. The Recron Filling Inside Only Adds To Its Comfort And Support, For A Luxurious Seating.Rubberwood Legs.The Rubberwood Legs Of The Sofa Is Not Just Responsible For Its Good Looks. With Impeccable Strength, It Can Withstand Rough Usage.Finish Color : Coffee Brown.Seat Height (Cm): 45. Primary Material : Pinewood. Delivery Condition : Knock Down.Upholstery Material : Leatherette. , Wooden Coofee Table Overall Dimension Of The Table Shall Be (120 W X 45 H X 60 D) Cm.Material : 18 Mm Thk Prelaminated Particle Board. Construction : Knock Down. Mip Lamination In Remini Walnut Shade With Matching Lipping In Matt Finish.Mip Lamination In Remini Black Ink Shade With Matching Lipping In Matt Finish. , Back Unitoverall Size Shall Be (750 Widthx 425 Depth X 750 Height) . It Shall Be A Two Door Hdu (High Density Storage) With One Adjustable Shelf.The Top And Shutters Shall Be In White Cedar While The Shelf ,Side Panels And The Back Panel Should Be In Black. The Top Shall Be 18 Mm Thick Plt With Pvc Lipping.The Suite Should Either Come With A Single Back Storage Unit Or As A Set Of 2- Unit Placed Besides Each Other . , Tables For Junior Office Room Overall Size Of The Table Shall Be (1200 W X 600 D X 750 H) Mm Work Surface Made Of 25Mm Thick Pre-Laminated Twin Board Of E1-P2 Grade And Approved Shade Confirming To Is-12823:1990, Edge Banded With Matching 2 Mm Thick Pvc Lipping.Gromet Provided On Work Surface For Wire Management.Modesty Panel Made Of 25Mm Thick Pre-Laminated Twin Board Of E1-P2 Grade And Approved Shade Confirming To Is-12823:1990, Edge Banded With Matching 2 Mm Thick Pvc Lipping.Under-Structure Made Of 25Mm Thick Pre-Laminated Twin Board Of E1-P2 Grade And Approved Shade Confirming To Is-12823:1990, Edge Banded With Matching 2 Mm Thick Pvc Lipping.Hinge Door Storage Made Of 25Mm Thick Pre-Laminated Twin Board Of E1-P2 Grade And Approved Shade Confirming To Is-12823:1990, Edge Banded With Matching 2 Mm Thick Pvc Lipping.Handle Is Provided For Ease Of Opening.Storage Is Provided With Cam Lock For Security.Main Desk With Gromet Cut-Out And Cap.Hdu On Lh/Rh For Storage.Colors: Valigny Oak (Laminate) And Black (Laminate). , Chairs For Junior Office Room Seat Assembly: The Seat Assembly Should Be Made Up Of 1.2 ±0.1Cm. Thick Hot-Pressed Plywood , Upholstered With Fabric Upholstery Covers And Moulded Polyurethane Foam.Seat Size: 47.0 Cm (W) X 48.0 Cm (D).Back Assembly:The Back Asembly Should Be Made Of Powder Coated (Oft 40-60 Microns) Tubular Frame Of 0 2.54 ±0.03Cm. X 0.2 ±0.016Cm.Thk. M.S.E.R.W Tube Designed With Contoured Lumbar Support For Extra Comfort.The Back Should Be Upholstered Using Double Layer Spacer Mesh Fabric With High Tenacity Yarn.Back Size : 46.5 Cm (W) X 60.5 Cm (H).High Resilience (Hr) Polyurethane Foam:The Hr Polyurethane Foam Should Bemoulded With Density =45+/-2 Kg/M3 And Hardness Load 16 ± 2 Kgffor 25% Compression.Armrests: The One-Piece Armrests Should Be Injection Moulded From Black Co-Polymer Polypropylene. Centre-Tilt Mechanism: The Mechashould Be M Should Bedesigned With The Following Features :- 360° Revolving Type.17° ±2° Maximum Tilt On Pivot At Centre.Upright Position Locking.Tilt Tension Adjustment.Pneumatic Height Adjustment:The Pneumatic Height Adjustment Has An Adjustment Stroke Of 11.0 ±0.3Cm.Telescopic Bellow Assy: The Bellow Should Be 3 Piece Telescopic Type And Injection Moulded In Black Polypropylene.Pedestal Assembly: The Pedestal Should Be Injection Moulded In Black 33% Glass-Filled Nylon66 And Fitted With 5 Nos. Twin Wheel Castors.The Pedestal Should Be66.3 ±0.5Cm. Pitch-Center Dia. (76.3 ±1.0Cm With Castors).Twin Wheel Castors:The Twin Wheel Castors Should Be Injection Moulded In Black Nylon. , Steel Seat For Waiting Area Seat/Back Frame Assembly:The Seat And Back Should Be Made Of 0.1 ±0.012 Cm Thick Cr Steel Perforated Sheets Which Should Be Welded To A Seat/Back Frame Assembly Made Of 0 1.9 ±0.02Cm X 0.16 ±0.0128 Cm Thk Ms Erw Tube.Connecting Strips Made Of 0.5Cm Thick Hr Steel Should Be Welded To The Structure.The Mounting Base Subassembly Made Up Of 0 1.9 ±0.02Cm X 0.16 ±0.0128 Cm Thk & C-Channel Made Of, 0.315±0.022Cm Hr Steel Welded To Connecting Strip For Assembly With The Connecting Beam.Seat Size: 39.2Cm (W) X 41.5Cm (D) (Approx.).Back Size: 39.5Cm (W) X 21.5Cm (H) (Approx.).Connecting Beam Assembly: It Should Be Made Up Of 5.0 ±0.03 Cm X 5.0 ±0.03 Cm X 0.16 ±0.0128 Cm Thk. M.S.E.R.W Squshould Be Tube.The Connecting Beam Should Be Powder Coated (Dft 40-60 Microns).The Ends Of The Beam Should Be Closed With L-Shaped Plastic End Cap Made From Pp Material. The Connecting Beam Assembly Should Bepowder Coated (Dft 40-60 Microns).Leg Assembly: It Should Be Made Up Of 5.0 ±0.03 Cm X 5.0 ±0.03 Cm X0.16 ±0.0128 Cm Thk. M.S.E.R.W Squshould Be Tube. And 0 3.175 ±0.03 Cm X 0.2 ±0.016 Cm Thk M.S.E.R.W Tube Welded Together To C-Channel Made Of 0.2 ±0.018 Cm Thk Cr Steel.Plastic End Caps Should Be Fitted To Legs. The Leg Assembly Should Be Powder Coated (Dft 40-60 Microns).Lounge Seating System Standing On Connecting Beam And Leg Structure. , Main Entrance Chair Seat/Back Assembly: The Seat And Back Should Be Made From Seasoned Wood, Knitted With Cane And Finished With Synthetic Paint (Black).Back Size: 45.7 Cm (W) X 39.0Cm (H).Seat Size: 45.7Cm (W) X 42.4Cm (D).Seat/Back : Chair Should Be Produced From Blends Of High And Low Density Polyethylene.The Chair High Tensile Strength At Break = 1400 Kg/Cm2 (Min.) & Elongation At Break = 54% Maximum.Armrest Tube: The Armrest Tube Should Be Made Of 0 2.54 ±0.03Cm. X 0.2 ±0.016Cm.Thk M.S.E.R.W. Tube And Welded To The Understructure Assy.Armrest: The Armrest Should Be Gas-Assshould Be Ted Injection Moulded From Blackpolypropylene.Understructure Assembly: The Understructure Assembly Should Be A Cantilever Type Frame Made Of 0 2.54 ±0.03Cm. X 0.2 ±0.016Cm.Thk. M.S.E.R.W. Tube And Powder Coated (Dft 40-60Microns).Back: (W) 45.7 Cm X (H) 39.0Cm,Seat: (W) 45.7 Cm X (D) 42.4Cm.Overall Dimensions Of Chair:Seat Height - 45.0 Cm.Height -88.0Cm.Width & Depth Of Chair As Measured From Base - Width-58.0 Cm And Depth-57.5 Cm.Powder Coated Frame. , Conference Table Work Surface-Made Of 25Mm Thick Pre-Laminated Twin Board Of E1-P2 Grade And Approved Shade Conforming To Is-12823:1990, Edge Banded With Matching 2 Mm Thick Pvc Lipping.Plastic Abs Access Flap Is Provided For Easy Access To Wires And Cables.Overall Size Of The Table Shall Be (1800 W X 850 D X 740 H) Mm With Sharing Table On Both (Lhs & Rhs) And Size Of The Table Shall Be (1350 W X 600 D X 740 H) Mm.Understructure-It Consist Of 18Mm Thick Pre-Laminated Twin Board Of E1-P2 Grade And Approved Shade Conforming To Is-12823:1990, Edge Banded With Matching 2 Mm Thick Pvc Lipping.Aluminium Alloy 63400 -Wp Profile Is Used For Connecting Panels Together.The Product Has A Knock-Down Construction.Modesty Panel-Made Of 18Mm Thick Pre-Laminated Twin Board Of E1-P2 Grade And Approved Shade Conforming To Is-12823:1990, Edge Banded With Matching 2 Mm Thick Pvc Lipping.Powder Coated Accent Metal Strip Provided Below Work Surface To Enhance Aesthetics. It Is Made Of 0.8Mm Crca As Per Is 513,Epoxy Polyester Powder Coated (Dft 40-60 Microns).Wire Management-An Array Of Panels Made Of 0.8Mm Crca Ms Is:513, Epoxy Polyester Powder Coated (Dft 40-60 Microns) Is Used For Flow Of Wires And Cables.Provision To Mount Anchor Roma 6 Module Plate Is Provided Below Worktop. Cutout On Top With Two Piece Injection Moulded Plastic Part Polymer Component Is Fitted To Pull Out Audio,Video Cables Onto Worktop And Connect Devices Charger To Power Socket Below Worktop. , Conference Mesh Chairs Overall Size Of The Chair : (W X H X D 72 X 87.4-99.4 X 72 Cm).Contact-Tilt Mechanism:The Tilt Mechanism Is Designed In Such A Way That It Can Be Adjusted In Different Adjustments To Obtain Maximum Comfort While Sitting.Seat Height Adjust.Height Of The Seat Can Be Adjusted According To Your Needs, Which Gives You More Confidence While You Are Sitting.Wide Seating One Of The Best Features Of These Chairs Is The Deep Seat That Gives A Generous Space To Sit And Relax.Premium Net Back Its Premium Net Back Gives Snug Feel And Superior Finish Which Helps You To Stay In The Correct Posture For Long Time.Mild Steel Under Structure.Made In Mild Stainless Steel, The Sturdy Build Forms A Solid Under Structure Which Supports The Foam Upholstery And Gives A Lustrous Look. , Table For Server Roomoverall Size Of The Table Shall Be (1200 W X 600 D X 750 H) Mm Work Surface Made Of 25Mm Thick Pre-Laminated Twin Board Of E1-P2 Grade And Approved Shade Confirming To Is-12823:1990, Edge Banded With Matching 2 Mm Thick Pvc Lipping.Gromet Provided On Work Surface For Wire Management.Modesty Panel Made Of 25Mm Thick Pre-Laminated Twin Board Of E1-P2 Grade And Approved Shade Confirming To Is-12823:1990, Edge Banded With Matching 2 Mm Thick Pvc Lipping.Under-Structure Made Of 25Mm Thick Pre-Laminated Twin Board Of E1-P2 Grade And Approved Shade Confirming To Is-12823:1990, Edge Banded With Matching 2 Mm Thick Pvc Lipping.Hinge Door Storage Made Of 25Mm Thick Pre-Laminated Twin Board Of E1-P2 Grade And Approved Shade Confirming To Is-12823:1990, Edge Banded With Matching 2 Mm Thick Pvc Lipping.Handle Is Provided For Ease Of Opening.Storage Is Provided With Cam Lock For Security.Main Desk With Gromet Cut-Out And Cap.Hdu On Lh/Rh For Storage.Colors: Valigny Oak (Laminate) And Black (Laminate). , Ms Chair For Workshop & Lab M/S Understructure With Arm Rest.The Seat And Back Should Be Made Up Of Injection Moulded Indoor Grade Polypropylene Compound.Seat Size : 52.5 Cm (W) X 53.2 Cm (D) Back Size : 51.6 Cm (W) X 40.5 Cm (H). The Powder Coated (Dft 50±10 Microns) Welded Tubular Frame Should Be Made From 0 2.22 ± 0.03 Cm X 0.16 ± 0.0128 Cm And 3.5 ± 0.03 Cm X 1.5 ± 0.03 Cm X 0.16 ± 0.0128 Cm Mserw Tube.The Shoes Should Be Made Of Indoor Grade Polypropylene Compound And Snap Fitted With Tubular Frame.The Armrest Should Be Made Of Indoor Grade Polypropylene Compound And Assembled Over The Tubular Frame.Back: (W) 51.6Cm X (H) 40.5Cm.Seat : (W) 52.5Cm X (D) 53.2Cm.Overall Dimensions Of Chair :- Seat Height - 45.0 Cm.Height - 84.5Cm.Width-62.3Cm And Depth-55.8 Cm. , Steal Seating For Entrance Lobby 3 Str Seat/Back Frame Assembly:The Seat And Back Should Be Made Of 0.1 ±0.012 Cm Thick Cr Steel Perforated Sheets Which Should Be Welded To A Seat/Back Frame Assembly Made Of 0 1.9 ±0.02Cm X 0.16 ±0.0128 Cm Thk Ms Erw Tube.Connecting Strips Made Of 0.5Cm Thick Hr Steel Should Be Welded To The Structure.The Mounting Base Subassembly Made Up Of 0 1.9 ±0.02Cm X 0.16 ±0.0128 Cm Thk & C-Channel Made Of, 0.315±0.022Cm Hr Steel Welded To Connecting Strip For Assembly With The Connecting Beam.Seat Size: 39.2Cm (W) X 41.5Cm (D) (Approx.).Back Size: 39.5Cm (W) X 21.5Cm (H) (Approx.).Connecting Beam Assembly: It Should Be Made Up Of 5.0 ±0.03 Cm X 5.0 ±0.03 Cm X 0.16 ±0.0128 Cm Thk. M.S.E.R.W Squshould Be Tube.The Connecting Beam Should Be Powder Coated (Dft 40-60 Microns).The Ends Of The Beam Should Be Closed With L-Shaped Plastic End Cap Made From Pp Material. The Connecting Beam Assembly Should Bepowder Coated (Dft 40-60 Microns).Leg Assembly: It Should Be Made Up Of 5.0 ±0.03 Cm X 5.0 ±0.03 Cm X0.16 ±0.0128 Cm Thk. M.S.E.R.W Squshould Be Tube. And 0 3.175 ±0.03 Cm X 0.2 ±0.016 Cm Thk M.S.E.R.W Tube Welded Together To C-Channel Made Of 0.2 ±0.018 Cm Thk Cr Steel.Plastic End Caps Should Be Fitted To Legs. The Leg Assembly Should Be Powder Coated (Dft 40-60 Microns).Lounge Seating System Standing On Connecting Beam And Leg Structure. , Main Table For Workshop Member Overall Size Of The Table Shall Be (1200 W X 600 D X 750 H) Mm Work Surface Made Of 25Mm Thick Pre-Laminated Twin Board Of E1-P2 Grade And Approved Shade Confirming To Is-12823:1990, Edge Banded With Matching 2 Mm Thick Pvc Lipping.Gromet Provided On Work Surface For Wire Management.Modesty Panel Made Of 25Mm Thick Pre-Laminated Twin Board Of E1-P2 Grade And Approved Shade Confirming To Is-12823:1990, Edge Banded With Matching 2 Mm Thick Pvc Lipping.Under-Structure Made Of 25Mm Thick Pre-Laminated Twin Board Of E1-P2 Grade And Approved Shade Confirming To Is-12823:1990, Edge Banded With Matching 2 Mm Thick Pvc Lipping.Hinge Door Storage Made Of 25Mm Thick Pre-Laminated Twin Board Of E1-P2 Grade And Approved Shade Confirming To Is-12823:1990, Edge Banded With Matching 2 Mm Thick Pvc Lipping.Handle Is Provided For Ease Of Opening.Storage Is Provided With Cam Lock For Security.Main Desk With Gromet Cut-Out And Cap.Hdu On Lh/Rh For Storage.Colors: Valigny Oak (Laminate) And Black (Laminate). , Table For Workshop Staffoverall Size Of The Table Shall Be (900 Width X 590 Depth X 750 Height) .The Top Panels Shall Be Made From 18 +/- 0.5 Mm Thick Pre - Laminated Boards As Per With 2 Mm Thick Pvc Edge Banding On All Sides . Understructure Shall Be Made From 0.9 Mm +/- 0.09 Mm Thick Powder Coated 50 Microns (+/-10) Crca Ms. Tubular Frame Shall Besq. 25.4 +/- 0.3 Mm X 1.2 +/- 0.096 Mm Thick Ms Erw Tube .Modesty Panel Shall Be Made From 1.0 +/- 0.09 Mm Thick Powder Coated 50 Microns (+/- 10). The Storage Shall Be Having Shell 0.5 +/- 0.07 Mm Thick Crca Ms Plus Drawer Tray 0.5 +/- 0.07 Mmthick Crca Ms Plus Drawer Front 0.8 +/- 0.1 Mm Thick Crca Ms . Also There Should Be 10 Lever Cam Lock Plus Handles Built In Plastic.Top Panel 18 Mm, 2 Mm Thick Pvc , Understructure C - Frame 0.9 Mm Thick Pc Microns , Tubular Frame , Modesty Panel , Storage. , Chairs For Workshop Members Shell :The Single Piece Seat Back Shell Is Made Up Of Injection Moulded Highimpact Strength Glass Filled Polypropylene Polymer Compound (Refer Product Catalogue For Colour Chart).Shell Size : 44.0 Cm. (W) X 50.2 Cm. (D) X 40.5 Cm. (H).S.S. Understructure Option (Sm6) : The Tubular Welded Frame Is Made From Dia 2.22 ± 0.03 Cm X 0.15 ± 0.0128 Cm Stainless Steel 304 Grade Tube Which Is Buff Polished. The 0.16 ± 0.008 Cm Thk Stainless Steel 304 Crca Sheet Is Welded To Tubes For Fixing Shell To The Frame.The Shoe Is Made Of High Impact Strength Polypropylene Polymer Compound And Are Fitted At The End Of The Tubular Frame , Personal Lockers Overall Size Of 6 Door Plu + Lkr (Base) Shall Be (375Mm (W) X 470 Mm (D) X 1950Mm (H).Dmx Drg.- Pl 13-A4-33797,R1 - 4 Sheets(Cam Lock) Dmx Drg.- Pl-13-A4-36467,R1-4 Sheets (Hasp.) Stackability Shall Have Add- On Units That Can Be Stacked Width Wise To Form Bank Of Lockers Having Common Side Panel. Locking Shall Have 10 Lever Cam Lock With Lock Lever Plus Option Of Hasp Arrangement.Material Shall Be Crca 0.6 Mm Thickness.Construction Shall Be Rigid Knock Down Construction ,Shelf Shall Be Uniformly Distributed Load Capacity Per Each Shelf Level Is 35 Kg Maximum.Finish Shall Be Epoxy Polyester Powder Coated To The Thickness Of 50 Microns . Handle/Label Holder Shall Be Aesthetically Appealing Snap Fit Absplastic Handle . Ventilation Shall Be Attractive Punched Pattern For Ventilation.Crca 0.6 Mm Thick Rigid Knockdown Construction , Shelf Udl Per Each Shelf Level Is 35 Kg Max. ,Hanging Rod ,Ventilation, Epoxy Powder Coating With Thickness Of 50 Microns And Absplastic Handle. , Office Almirah Overall Size Of The Almirah Shall Be (900 W X 507 D X1950 H).Height Without Leveler. Construction Completely Knock Down Construction.Removable Skirting To Cover Integral Legs.Legs Fitted With Screw Type Leveler.Made From Combination Of Crca 0.8 Mm & 0.6 Mm Thickness.Main Door :Steel Hinged Door.Main Door Locking / Handle:Handle & Base Aesthetically Appealing, Ergonomic, Flush With Door Made From Zinc Alloy.3 Way 90 Degree Removable Key Type Cam Lock & Locking Mechanism.Locker Door & It’S Locking / Handle For Model ‘H’.Hinged Door.Shelving.Height Wise Adjustable Shelf Mounting • 4 Nos. Of Full Adj.Shelves.Top Fixed Full Shelf.Finish:Epoxy Powder Coated To The Thickness Of 50 Microns (+-10).
