|
| 1 | Wiring point for light with 1.5sq mm PVC insulated single cor aluminium conductor cable in heavy gauge rigid steel conduit pipe concealed in the wall complete with 8 SWG GI earth continuity wire piano type switch & ceiling rose /angle batten holder on 3mm thick phenolic laminated bakelite sheet etc complete in all respect as directed including matching colour wash |
| 2 | Wiring point for exhaust fan with 1.5sq mm FR PVC insulated copper conductor cable in25mm dia heavy duty etc al |
| 3 | S/F LED lighting of approved quality etc all complete (M.R) |
| 4 | Inatalation of celling fan 1200 mm size etc all |
| 5 | Fixing of alluminium work etc all comp |
| 6 | Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS: 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.1. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.1. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawi plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound, jointing tapes, finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer\"s specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with 43.67 sc Fully Perforated Gypsum Plaster Board of size 1200X 2400x12.5 mm having approx. 15% perforated area with perforation size and pattern as approved by the Engineer in-charge and as per manufacturer\"s specification, with all 4 side tapered and backed by acoustical tissue withwd12.45. NRC value not less than 0.60 |
| 7 | Wall paneling, and fixing in position wall panels of plain teak wood partical board 12 mm thick bonded with H.W.P Type phenol Formaldehyde synthetic resin ules kali wood frame and provision for providing switch board fixture etc as per drawing complete wah polishing and firming with frame was polish as per direction green by engineer-in-charge one side laminated inside of plain board chapter по 12 |
| 8 | float glass panelsof nominal thickness 5 mm (weight not less than 12.5 kg/sqm) |
| 9 | Dismentling of damage plaster including stacking dismental material with in 60m distence etc all comp. chapter no7706 |
| 10 | 15 mm thick thick cement plaster in two coats, backing coat 17 mm and finishing coat 3 mm thick (of neet cement of cement and marble dust on rough side 1:3 cement c. sand for celling etc all comp. |
| 11 | Cement concrete flooring 1:2:4 cement C sand 2cm stone grit laid with one layer finishied with flooting cost with neet cement with 40 mm thick floor etc all comp |
| 12 | Scraping out old existing white colour wash including all labour material T&P |
| 13 | Providing and applying white cement based putty of average thickness of Imm of approved brand and manufacture over the plaster woll surface to prepare the surface even and smooth including cost of material labour &T&Petc all comp |
| 14 | Providing laying of Sto 10mm thick kajaria tiles of 600x600 mm size of floorsing or skriting laid with 1:3cement and morter finishing with cement slurry & with pigment grouting &polishing complete i/c suply of all materials labour T&P required for proper comletion of work |
| 15 | Wall painting with acrylic emulsion point, having VOC (Volatile organic compund) three coat content less than 50 grams/litre, of app. Brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. |
| 16 | Supply and instalation of 2.00 ton 3 star split Inverter Heavy duty cooling (air conditionar) with cooper condenser Voltas brand IST etc all comp |
| 17 | Dismentling of damage brick work including stacking dismental material with in 60m distence etc all comp. |
| 18 | P/L of 20 mm dia CPVC fitting and clamp including of all material ete all comp |
| 19 | supply and hosting pve water tank etc all comp. |
| 20 | Brass stap cock 20mm dia 400grm haevy qualty (Gem Mikade of Encess,s Williams } etc all comlete |
| 21 | Supply and fixing of 100 mm dia pvc pipe complete with rose heads MS clamps 2.5 cm x 3 mm fixed ton wall by 15 cm long 6 mm dia nail and including repair of plaster pointing etc if damaged during fixing of the pipes including cost of all material labour, tools and plant etc requred for proper copletion of work. (sch no 730, 100 mm dia pvc pipe) |
| 22 | empty |
| 23 | P/F of C.P. bib cock with all fittings etc all complete |
| 24 | S/F of master trap with appoved quality with all complet (M.R} |
| 25 | P/F of hand wash basin 550x400mm size of white glazed earthen ware {22\"x16\") with waste jali of approved quality ISI mark etc all complete. |
| 26 | P/Fof P V C low level flushing cistern with ISI mark etc all comp |
| 27 | Suply &Fittng of exast fan heavy duty all comp |
| 28 | P/L of of fush doors 30mm thich commercial quility including fixing and adjustment of hinges bolts lock handles spring etc all comp |
| 29 | Supply of plywood-19mm thick commercial etc all comp |
| 30 | Repair of plaster of thicknes 12to20mm in patches of area 2.5 sqm and under including patch in proper shape raking oud of joints and preapring the surface etc all comp. |
| 31 | S/Fof flat back or angular front lipper urinal basin of white glezed earthen ware580mm for proper completion of work |
| 32 | GST (18%) |
