Tender For Construction Of Pds Shop Building No. 27Bd002 Pn In Ward No 33.; 1 Earth work excavation and deposting on bank with an intial lead of 10m& initialliftm of2m in hard siff clay , stiff black cotton , hard red earth shales , murram , gravel, stoney earth and earth mixed with small size boulders and hard gravelly soil asper standard specification 20.B including refilling charges 2 Plain cement concrete 1:4:8 mix using 40mm metal ISS HBG metal including and const and conveyance of all materials and all labour charges etc completeas per std specification 3 Providing steel centeringfor sides and soffits of cement concrete works including necessary arrangements with strutting for plain surfaces with out props, With all cost and conveyance of materials and lab our at site ect ., Coplete as per standard specfication. 4 For Raft & Floor Beam 5 For Column 6 For Slab & beam 7 Supplying , fabricating and placing in it position of MS or RTS rod including the cost of steel & Binding wire, labour charges for cutting, bending, placing & tying with grills and conveyance etc., complete.asper standard specification. 8 Reinforced cement concrete 1:11/2:3 mix using 20mm ISS size HBG metal from approved quarry including all cost and conveyance of all materials to site and all labour charges etc., complete.asper standard specification. 9 For Foundation / Basement 10 For Ground Floor 11 Supplying and filling the basement with Good Earth filling in layers of not more than 15cmthick well rammed watered and compacted - etc., complete complying with standard specification. 12 Brick work in CM 1:5 (one cement & Five Crushed Stone Sand (M- Sand)) using II class ground moulded bricks of size 9 X 43/8X 2 3/4 including finishing, curing, etc., complete complying with standard specification - 100CFT 13 For Basement 14 For Super Structure 15 Special ceiling Plastering cement mortar 1: 3 mix10mm thick including cost and conveyance all materials etc. complete as per std specification 16 Plastering with cement mortar 1: 5 mix12mm thick including cost and conveyance all materials etc. complete asper standard specification. 17 Weathering course of concrete borken brick jelly 20mm size in pure slacked lime over RCC roof slab the proportion 32:12.5 (Thirty two Broken Jelly and Twelve and Half Slacked lime) Mix for required depthof 80mm for giving required slope and thickness to roof as required well beaten with wooden beaters etc., complete complying with standard specifications. 18 Terrace flooring with one course or pressed tiles of size 20cm x 20cm x 20mm laid in CM 1:3 (One cement and three sand) mixed with crude oil 10% by weight of painted with same oiled mortar in all cost of materials and lab our charges etc., complete. as per standard specification. 19 Paving the floor with Vitrified Marbonite tiles of approved quality and colour of size 600x600x8mm thick of approved make, quality and colour in all floors over a base layer of cement mortar 1:3(one cement three sand) 20mm thick and laid straight alignment and pointed neatly with colour cement at the rate of 0.40kg/m2 laid without any air gap in the tiles neatly and fixing in position as per standard specifications and as directed by the departmental officer.The colour & quality of tiles should be got approved by Municipal Engineer before use on work 20 Paving the floor with ceramic tiles siratch proof design of size305mm x 305mm x 6mm in Cement Mortar 1:3,20mm thick with all cost and conveyance of materials etc., for flooring of self designed grooves and both way special colour tile of best quality and pointing with white cement using atthe rate of 0.40Kg / sq m including finishing thejoint neatly and pointing flush with tile surface etc complete 21 Dadooring the walls with glazed square tiles of 150mmx150mmx6mm of the following colour set in cement Mortar 1:2 10mm thick and pointed with white cement @ 0.4Kg/m2 in all floors as directed etc., complete complete complying with standard specification (S.D.261A) 22 Providing polished cuddapha slab of 20mm to 30mm thick for shelves, cupborards, cover slabs etc., and pointing with cement mortar 1 : 3 ( One cement and three sand) and mixed with black oxide and finished smooth etc., complete. 23 Supplying fixing of M.S sheet doors and widows and Grills including all cost and conveyance of materials to site and all labours charges for etc. complete asper standard specification. 24 Manufacturing supplying and fixing ofMILD STEEL DOOR made out of 50 x 50 x 6 mm M.S angle for outer frame,35 X 35 X 5mm M.S.Angle for outer frame of shutter. The entire shutter area shall be covered with CRC sheets (18 G) with 5Nos, of stiffners using M.S.Flats of size 25 X 6mm at equal intervals horizontally. The corners of the frames and shutter with CRC sheets shall be welded by adopting flash butt welding or any other suitable method. Provision towards 3Nos, of Hinges incase of single shutters / 6Nos,of Hinges incase ofDouble shutters of 125 X 31 X 1.25mm size placed at appropriate intervals and provisions shall be made for Tower bolts 2Nos, Aldrop 1No. The frame shall be provided with 6Nos,of Hold fast of 200mm length using 50 X 6mm M.S.Flat. The entire frame and shutter shall be provided with one coat of red oxide primer including cost of hold fasts,hinges, locking arrangements, handles wind appliences etc., complete and as directed by the departemental officers. 25 Manufacturing supplying and fixing ofMILD STEEL Window made out of 40 x 40 x 6 mm M.S angle for outer frame, 35 X 35 X 5mm M.S.Angle for outer frame of shutter. The entire shutter area shall be covered with CRC sheets ( 18 G ) with 5Nos,of stiffners using M.S.Flats of size 25 X 6mm at equal intervals horizontally. The corners of the frames and shutter with CRC sheets shall be welded by adopting flash butt welding or any other suitable method. Provision towards 3Nos, of Hinges incase of single shutters / 6Nos,of Hinges incase ofDouble shutters of 125 X 31 X 1.25mm size placed at appropriate intervals and provisions shall be made for Tower bolts 2Nos, Aldrop 1No. The frame shall be provided with 6Nos,of Hold fast of 200mm length using 50 X 6mm M.S.Flat. The entire frame and shutter shall be provided with one coat of red oxide primer including cost of hold fasts,hinges, locking arrangements, handles wind appliences etc., complete and as directed by the departemental officers. 26 Supplying and fixing of rolling shutters shall be pull and push type (Gear operated) made of 18G/3 lathe sections which consist of five main parts such as curtain, lock plate, guide channels rollers and hood cover. These five main parts are made out of special components detailed below: curtain shall be of 18G/3 lath sections cut to required size and filled with heavy cast iron / MS clips. For 80(2.45m) high rolling shutter lath sections provided shall be not less than 37 numbers. Lock plate shall be 10GMS sheet and attached to the side brackets with 20mm square bar.Side brackets shall be of 10G MS plate and cast iron U clamps shall be rivetted to the side brackets. Roller shall be of heavy cast iron pullies fitted with heavy duty C class 40mm steel pipe and high tensile high carbon coil springs. 2 springs shall be supplied. Side brackets shall be of 10G MS plate and cast iron U clamps shall be rivetted to the side brackets. Roller shall be of heavy cast iron pullies fitted with heavy duty C class 40mm steel pipe and high tensile high arbon coil springs - 2 springs shall be supplied. Hood cover shall be of 0.8mm CRCA sheet reinforced with 25mmx25mmx3mm MS angle or gate channel. The rolling shutter in addition to the above should have pulling hook and shall be coated on exposed area with heavy coat of red oxide primer etc., complete. 27 Painting two coats with approved Interior and Exterior Emulsion paint over cement plastered wall surfaces including cleaning preparing the surface and quring etc complete asper standard specification. 28 Painting two coats with ready mixed approved paint over newsteel surfaceincluding cost and conveyance all materials etc. complete asper standard specification. 29 Solid PVC Door Shutters using 19 Gauge 19mm MS square tubes for styles and outer frames. 15mm MS square tubes for top, lock and bottom rails. The steel tubes shall be covered with 5mm thick solid PVC Sheets. Shutter using 5mm thick solid PVC Sheets for panelling shall rigidly fixed in position including necessary furniture and fittings. The over all size of styles shall be 50mm x 30mm. The over all size of top rail, lock rail and bottom rail shall be 75mm x 30mm. The over all size of frames shall be 50mm x 45mm with suitable rabate for housing the shutter. 30 Supplying and fixing in position Indian water closet of size 580 X 440mm, white glazed earthen ware of approved quality with P trap or S trap confirming to IS:2556 -Part XII with sand cushion and forming flooring alround the closet using 40mm broken brick jelly in lime concrete1:2:5 ( one part of lime, two parts of sand and five parts of brick jelly) 100mm thick and finishing the top to required slope and including giving necessary connection to cast iron soil pipes/ PVC pipes by dismandling brick masonry, reinforced cement concrete roof/floor slab and making good the disturbed portion to original condition without leakage etc., complete complying with standard specifications and as directed by the departmental officers. 31 Conducting Geophysical Investgation for finding ground water table with necessary T & Pincluding alllabour charges etc complete as per std specification 32 Supplyingof 140mm dia PVC Special Blue pipes for borwelles outer casing pipe of best quality including all labour charges etc., complete as per SI no 159.A (c) PWD schedule of rate and standardspecification 33 Drilling of 125mm (4 1/2”) nominal dia vertical borewells anywhere in Tamilnadu in all formations, suitable for down the hole hammer drilling such as medium hard rock to hard rock formation, consolidated formation etc and drilling over burden to a dia not less than 200mm including insertion of 165 mm PVC casing pipe, couplings caps and other relevant materials required upto the depth as directed by the Engineer or his representative including grouting of cement 25kg (minimum) up to the depth of over burden are including borewell development flushing of borewell at a pressure 7kg/cm2 (100 lb per square inch) including yield test, crew charges, cost of consumables, transportation charges of casing pipes and all other materialsincluding assembling complete to the satisfaction of the Engineer and as stipulated in the technical specification.The entire works should be carried out as per IS 2800 Part I & II / 1979.Finished dia of borewells shall not be less than 145mm 34 Labour Charges for inserting 140mm OD PVC casing pipes assmbly(with slots or without slots) in the drilled hole including the jointing the pipes with PVC couplers with cement paste ect.complete as per schedule item no 14-d(i)of TWADschedule of rate. 35 Supply, delivery and fixing of 1.5HP Jet Pumpset including all cost and conveyance etc., complete 36 Supplying of following pipes and special including cost and conveyance all materials etc. complete 37 1 HDPE hose 38 1 GI pipe 39 1 GI union 40 1 GI elbow 41 1 GI tee 42 1 GI coupling 43 1 G.I Hex Nipple 44 1 x 1/2 GI Reducer 45 1/2 HDPE hose 46 1/2 GI pipe 47 1/2 GI union 48 1/2 GI elbow 49 1/2 GI tee 50 1/2 GI coupling 51 1/2 G.I Hex Nipple 52 1 Hose color 53 1/2 Hose color 54 1 PVC Pipe 55 1 PVC Coupling 56 1 PVC Tee 57 1 PVC Ellbow 58 3/4 PVC Pipe 59 3/4 PVC Coupling 60 3/4 PVC Tee 61 3/4 PVC Ellbow 62 3/4 x 1/2 PVC Reducer 63 3/4 G.M Gate valve 64 Bottom unit 65 140mm Bore cover 66 1000 litre tank 67 15mmSDtap 68 50mm PVC Pipe 69 50mm PVC Cowl 70 110mm PVC Pipe 71 110mm PVC Coupling 72 110mm PVC Tee 73 110mm PVC Elbow 74 Solvent cement 75 Supply and runof 2 of 4 sq.mm(56/0.3) PVC insulated SC unsheathed Cu.conduction of 1100V on 7/20 GI bearer wire for service connection mains. (SD 65) 76 Supply and run of 2 of 4 sq.mm.(56/0.3)PVC insulated SC unsheathed Cu.Conductor of 1100V grade in 25mm dia GI pipe (class B ) suitably bent at both ends with neccessay angle iron upright and end support for mains (SD 70) 77 Supply and fixing of 16 Amps DP Switch with metal clad of 500 V with fuse and neutral (Side Handle) on suitable TW Box PWD Earthing(SD 141) 78 Earthing as per the ISI specification with an earth electrode of 2.1 mt class B GI pipe of dia not less than 40mm, with copper earth plate of size 125mmx50mmx6mm, with necessary funneling arrangements with necessary masonry work and with 38mm RCC coverslab for the brick masony. (SD 233) 79 Supply and fixing of 15A aeriual fuse unit(500A) on suitable 100x100 mm TW concealed box with hylem sheet on on the tapping pole with necessary clamps (SD 128) 80 Supply and Fixing of TNEB meter Board suitable for 32A single Phase service connection with 32A Fuse unit (500V) 32A neutral link and earthlink (1x1/8 copper flat) on TW plank of size 375mm x 300mm x 19mm with supporting TW reepers of 1 thick an either side with painting with suitable bolt and nuts for fixing the TW plank on wall with earth connection with 7/20 PVC insulated copper wire from EB meter to fuse unit,(SD 125). 81 Supply and Fixing of 5A or 10 Amps AC Single phase 230 V , 50 HZ watt hour metre on Suitable TW box complete with earth connections. (SD 124) 82 TNEB charges for new service connection main including all cost and conveyance etc., complete. 83 Errection of pipes and specials in to borwell and conneckion 1.00 HP compressor motar etc., complete as per standard specification 84 Providing andfixing 110mm dia PVC Rain water down fall pipe eith necessary specials with all cost andconveyance or material cost and all labourcharges etc, complete as per standard specification 85 Supplying and fixing in position Indian water closet of size 580 X 440mm, white glazed earthen ware of approved quality with P trap or S trap confirming to IS:2556 -Part XII with sand cushion and forming flooring alround the closet using 40mm broken brick jelly in lime concrete1:2:5 ( one part of lime, two parts of sand and five parts of brick jelly) 100mm thick and finishing the top to required slope and including giving necessary connection to cast iron soil pipes/ PVC pipes by dismandling brick masonry, reinforced cement concrete roof/floor slab and making good the disturbed portion to original condition without leakage etc., complete complying with standard specifications and as directed by the departmental officers. 86 Wiring with 2 x 1.5 sqmm (22 / 0.3) PVC insulated SC unsheathed Cu. Conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories in flush with wall with 3mm thick hylum sheet cover with TW switch box and 5A F.T switch with continuous earth wire connection of 14 SWG TC wire for making good ofthe concealed portion with suitable colour for PVC concealed light point / Fan point (For electronic regulator). (SD 22) 87 Supply and fixing of 1200mm (48)A C ceiling fan complete with stepped electronic 300W regulator with 300mm down rod on the existing clamp(S D 110) 88 Supply and fixing of 20W 4 Feet LED Fitting with LED 89 Supply and fixing of 30W LED Street Light Fitting with LED 90 Wiring with 2X1.5 sq mm (22/0.3) P V C insulated S C, unsheated Cu. Conductor of 1100 V grade in suitable P V C rigid pipe on wall and ceiling with P V C accessories 100X113mm TW switch box for 5 A3 pin non interlocking C S plug with painting of suitable colour with contineous earth wire connection of 14 SWG TC wire for open P V C plug point( S D 36) 91 Supply and fixing of 375mm (15) sweep (light duty) AC exhaust fan complete with necessary wall opening and making of the wall 92 Painting and letteringarrangements for using best and approved colour including allcost and conveyance of materials to site and all labour cahrges etc. complete as per standard specification. 93 Supplying and fixing of SS Sink of Size 600mm x 450mm x 200mm including all labour charges etc complete as per standard specifications 94 Toilet sewerage line connect to UGD Manhole inluding all laour charges etc., complete as per standard specifications. 95 Supplying and fixing of Innaguration function of Tablet Stone and other items of expenditure with all cost and conveyence of material and labour cost at site etc., complete as per standard specification
