Tender For Addition/ Alteration To Bldg No P-44 Block C-4 (Type-Iii Qtrs) At Nmrl Ambernath-- 1 Dismantling floor hearth or wall tiles laid in cement mortar including stacking material within 50 metres leadcomplete all as specified and directed. 2 Demolishing cement concretemanually/ by mechanical means including disposal of material within 50 metres lead complete all as specified and directed by Engineer - in - charge. 3 Dismantling doors, windows and clerestory windows (steel or wood or pvc) shutter Of area 3 sq. metres and below including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead complete all as specified and directed. 4 Disconnecting damaged overhead/terrace PVC water storage tank of any size from water supply line and removing from the terrace including shifting at ground level complete all as specified and directed by Engineer-in-charge. 5 Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank complete all as specified and directed. 6 Material and labour for providing 40mm thick PCC 1:2:4 type B0 (using 12.5mm graded crushed stone aggregates) as in sub base & leveling course complete all as specified and as directed by Engineer-in-Charge. 7 Providing and laying vitrified floor tiles 600x600 mm and thickness not less than 9mm with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid over and including 20mm thick cement mortar 1:4jointing with grey cement slurry @ 3.3 Kilogram/ sqm including grouting the joints with white cement and matching pigments etc., complete all as specified and directed. 8 Providing and laying Vitrified tiles 600x600 mmand thickness not less than 9mm with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over and including 12 mm thick bed of cement mortar 1:3 jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc. complete all as specified and directed. 9 Providing and laying ceramic tiles Matt/Antiskid finish of size 300 x 300 mm x 7 mm in floor and conforming to IS:15622,laid over and including 20 mm thick cement mortar 1:4jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily complete all as specified and directed. 10 Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS: 15622 (thickness not less than 7 mm) of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados laid over 12 mm thick bed of cement mortar 1:3and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete all as specified and directed. 11 Demolishing RCC work cement concretemanually/ by mechanical means including disposal of material within 50 metres lead complete all as specified and directed by Engineer - in - charge. 12 Providing and layingreinforced cement concrete in 1:2:4 Type B1 using 20mm graded stone aggregate as in Slabs supported on walls in any position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement complete all as specified and directed. (Note : centering, shuttering, finishing and reinforcement shall be measured and paid separately). 13 Supply and Fix 10mm Thermo-Mechanically Treated bars of grade Fe-500D or more Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding complete all as specified and directed 14 Centering and shuttering including strutting, propping etc. and removal of form for slabs and breaks in floors and wallscomplete all as specified and directed. 15 Providing and fixing 18 mm thick Granite stone slab gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window cills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4, joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding , rounding to edges and polishing to edges to give high gloss finish etc. complete all as specified and directed at all levels. 16 Material and labour for 15 mm cement plaster on the rough side of single or half brick wall in CM 1:4 complete all as specified and directed. 17 Providing & Applying polymer modified, flexible cementatious negative side waterproofing coating with elastic waterproofing polymers on interior wall plaster surface in three coats @14.35 kg /10 sqm. one coat of self priming of cementaneous waterproofing polymer(dilution with water in the ratio of 1:1) and two coats of cementaneous waterproofing polymer (dilution with water in the ratio of 3:1 ) after scrapping and properly cleaning the surface to remove pre-existing paint film & loose particles till plaster is visible, complete all as specified and directed byEngineer-in-Charge. 18 Providing and laying in position cement concrete 1:4:8 type D2 (using 40 mm graded stone aggregated) complete all as specified and directed. 19 Providing and fixing PVC Door Frame of size 50x47 mm with a wall thickness of 5 mm (± 0.2 mm), made out of single piece extruded PVC profile, with mitred cut joints and joint with 2 nos of PVC bracket of size 190 mm x 100 mm long arms of cross section size 35 x 15 mm & self driven self taping screws, the vertical door profiles to be reinforced with 40x20 mm M.S. rectangular tube of 0.8 mm , including providing EPDM rubber gasket weather seal throughout the frame, including jointing 5 mm PVC frame strip with PVC solvent cement on the back of the profile. The door frame to be fixed to the wall using 8 x100 mm long anchor fasteners complete, all as per manufacturers specification and complete all as specified and directed by Engineer -in- charge. 20 Non decorative finish (matt finish)35 mm thick factory made Solid panel PVC Door shutter, made out of single piece extruded soild PVC profiles, 5 mm (± 0.2 mm) thick, having styles & rails (except lock rail) of size 95 mmx 35 mm x 5 mm, out of which 75 mm shall be flat and 20 mm shall be tapered (on both side), having one side thickness of 15 mm integrally extruded on the hinge side of the profile for better screw holding power, including reinforcing with MS tube of size 40 mm X 20 mm x 1 mm, joints of styles & rails to be mitered cut & joint with the help of PVC solvent cement, self driven self tapping screws & M.S. rectangular pipes bracket of size 190 mm X 100 mm of cross section size 35 mm x 17 mm x 1 mm at each corner. Single piece extruded 5 mm thick solid PVC Lock rail of size 115 mm x 35 mm, out of which 75 mm to be flat and 20 mm to be tapered at both ends, having 15 mm solid core in middle of rail section integrally extruded, fixing the styles & rails with the help of solvent and self driven self tapping screws of 125 mm x 11 mm, including providing 5 mm Single piece solid PVC extruded sheet inserted in the door as panel, as per manufacturers complete all as specified and directed of Engineer-in-charge. 21 Providing Second class Hardwood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately) complete all as specified and directed. 22 Providing and fixing 30 mm thickflush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of second class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters including ISI marked stainless steel butt hinges of suitable size with necessary screws complete all as specified and directed. 23 Providing and fixing Second class hard wood 30 mm thick wire gauge shutters with ISI marked M.S. pressed butt hinges bright finished of required size using galvanized M.S. wire gauge of average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm, for doors, windows and clerestory windows with hinges and necessary screws complete all as specified and directed. 24 Providing and laying in position cement concrete for hold fast1:2:4 Type B1 (using 20 mm graded stone aggregate)complete all as specified and directed. 25 Providing and fixing100x75x3.50 mmISI marked, IS : 1341, M.S. butt hinges with necessary screws etc. complete all as specified and directed. 26 Providing and fixing 300x16 mmaluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete all as specified and directed. 27 Providing and fixing125 mm aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete all as specified and directed. 28 Providing and fixing 200x10 mmaluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete all as specified and directed. 29 Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete all as specified and directed. 30 Providing and fixing 150 mm oxidised M.S. hasp and staple (safety type) conforming to IS : 363 with necessary screws etc. complete all as specified and directed. 31 Providing and fixing Powder coated aluminium Frame (minimum thickness of powder coating 50 micron)work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and complete all as specified and directed of Engineer-in-charge. (Glazing, paneling and dash fastenersto be paid for separately) 32 Providing and fixingPowder coated aluminium (minimum thickness of powder coating 50 micron) work forsliding shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately)ventilators and partitionscomplete all as specified and directed by Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) 33 Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc With float glass panes of 4.0 mm thickness (weight not less than 10kg/sqm)with EPDM rubber / neoprene gasket etc. complete as per the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item) 34 Providing and fixing fly proof stainless steel With aluminium beading grade 304 wire gauge, to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia. 0.50 mm all complete all as specified and directed. 35 Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc With frosted glass panes of 4.0 mm thickness (weight not less than 10kg/sqm) with EPDM rubber / neoprene gasket etc. complete as per the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item) 36 Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead complete all as specified and directed. 37 Material and labour for 15mm thick External wall plaster on brick or concrete surfacesin CM 1:4shall be provided in two coats viz 10 mm first coat and 5 mm second coat using W.P.C.and finished fair and even complete all as specified and directed.Note:- WPC will measurement separately. 38 Material and labour for 12 mm thick internal plaster on brick or concrete surfaces in CM 1:6 andfinished even & smooth without using extra cement complete all as specified and directed. 39 Material and labour for 5 mm cement plaster in 1:3 in ceiling surfaces finished with a floating coat of neat cement and thick coat of Lime washcomplete all as specified and directed. 40 Supply only liquid water proofing compound complete all as specified and directed by Engr-in-Charge 41 Material and labour for complete removal of existing treatment and applying Twocoats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over old surfaces complete all as specified and directed. 42 Material and labour for prepartion of Newly plastered surfaces and applying Two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance,dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm on walls all as per manufacturer instruction complete all as specified and directed by Engineer-in-charge. 43 Preparation of Newly Plastered surfaces and apply primer coat of Wall andapplying Two coats of Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturers specification including applying 2mm thick wall care putty complete all as specified and directed. 44 Removing white or colour wash by scrapping and sand papering andpreparing the surface smooth including necessary repairs andProviding and applying plaster of paris putty of 3mm thickness over plastered surface to prepare the surface even and smoothand apply two coat of Distempering with 1st quality acrylic distember (Ready mix) having VOC content less than 50 grams/ litre of approved brand and manufacture to give an even shade complete all as specified and directed. 45 Material and labour for preparation of newly plastered ceiling and applying three coats of white wash complete all as specified and directed. 46 Material and labour for two coat of white wash on ceiling including preparation of old surfaces complete all as specified and directed. 47 Painting with synthetic enamel paint on steel surface of approved brand and manufacture of required colour to give an even shadetwo coats onnew work complete all as specified and directed. 48 Applying priming coat for new wood work With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) and Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer including Painting wood work with Deluxe Multi Surface Paint of required shade. Two coats applied @ 0.90 ltr/10 sqm over an under coat of primer applied @0.75 ltr/10sqm of approved brand and manufacture as per manufacturers specifications complete all as specified and directed. 49 Supply and fix 75 mm dia PVC (SWR) floor trap with gratings including jointing with solvent cement, including jointing to waste pipe and fixed incement concrete type B1 1:2:4 complete all as specified and directed. 50 Providing and fixing CPVC gate valve of approved quality (screwed end)of 20mm dia bore and fixed complete all as specified and as directed. 51 Providing and fixing in repair 610x510 mm bowl depth 200 mm Kitchen sink withoutdrain board Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required complete all as specified and directed. 52 Supply and fix in repairs kitchen steel plate rack of size 914 X 914 X 254 mm stainless steel 1.00 mm thick of standard quality complete all as specified and directed. 53 Supply and Fix in repair White Vitreous china Orissa pattern W.C. pan of size 580 mm x 470 mm with integral type foot rests squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required complete all as specified and directed. 54 Providing and fixing White Vitreous China Flat back wash basin 550 x 400 mmwith C.I. brackets, 15 mm C.P pillar cock, 32 mm C.P waste coupling and Flexiblewaste pipe of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required and complete all as specified and directed. 55 Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board back ground fixed to wooden cleats with C.P. brass screws and washers complete all as specified and directed. 56 Providing and fixing 15 mm nominal dia C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931 and complete all as specified and directed. 57 Providing and fixing uplasticised PVC connection pipe 45 cm length with brass unions 15 mm dia nominal bore complete all as specified and directed. 58 Providing and fixing C.P. brass 15 mm nominal diabib cock of approved quality conforming to IS:8931 complete all as specified and directed. 59 Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet :100 mm diameter complete all as specified and directed. 60 Providing and fixing PTMT towel rail complete with brackets fixed to Steel cleats with CP brass screws 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms complete all as specified and directed. 61 Dismantling C.I. or asbestos rain water pipe with fittings and clamps including stacking the material within 50 metres lead :75 to 80 mm dia pipe complete all as specified and directed. 62 Providing and fixingSingle socketed pipes75 mm diameter on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, complete all as specified and directed. 63 Providing and fixingSingle socketed pipes110 mm diameter on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, complete all as specified and directed. 64 Providing and fixing75 mm bend on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. complete all as specified and directed. 65 Providing and fixing110 mm bend on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. complete all as specified and directed. 66 Providing and fixing75 mm Single tee with door on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion complete all as specified and directed. 67 Providing and fixing110mm Single tee with door on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. complete all as specified and directed. 68 Supply and FixPVC (SWR) Vent cowl 75 mm dia complete all as specified and directed. 69 Supply and FixPVC (SWR) Vent cowl 110 mm dia complete all as specified and directed. 70 Dismantling 15 to 40 mm dia G.I. pipe including stacking of dismantled pipes (within 50 metres lead) complete all as specified and directed by Engineerin-Charge. 71 Providing and fixing 15 mm nominal dia PipesChlorinated Polyvinyl Chloride (CPVC) pipes Concealed work, including cutting chases and making good the wall etc, having thermal stability for hot & cold water supply,Concealed work, including cutting chases and making good the walls etc including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete all as specified and directed by Engineer in Charge. 72 Providing and fixing 20 mm nominal dia Pipes Chlorinated Polyvinyl Chloride (CPVC) pipes for External work, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete all as specified and directed by Engineer in Charge. 73 Providing and fixing 15 mm nominal dia CP Brass Single lever telephonic wall mixer of quality & make complete all as specified and directed by Engineer in charge. 74 Providing and fixingmild steel CP of 20mm external dia and 1.60 mm thick curtain rodswith twobrackets fixed with brass screws and wooden plugs etc. wherever necessary complete all as specified and directed. 75 Providing and fixing 12 mm thick factory made single extruded WPC (Wood Polymer Composite) solid plain white color board for backing of cup boards and bathroom/kitchen cabinets etc. of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel screws etc. complete all as specified and directed by Engineer-In- Charge. (Note: stainless steel screws shall be paid separately) 76 Providing and fixing MS Piano hinges overall width 35mm ISI marked IS: 3818 finished with nickel plating and fixing with necessary screws etc complete all as specified and as directed. 77 Providing and fixing 18 mm thick factory made single extruded WPC (Wood Polymer Composite) solid board one side white colour and other side of board laminted with PVC foil of minimum 14 micron thickness of approved design pasted with hot melt adhesive for cup boards, work stations and bathroom/kitchen cabinet etc. of required sizes comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/ borer proof, water/moisture proof and fire retardant and fixing with stainless steel piano hinges/soft close clip on concealed hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and directed of Engineer-In- Charge. (Note: stainless steel piano hinges/soft close clip on concealed hinges and necessary S.S screws shall be paid separately) 78 Material and labour for removing existing water proofing treatment of any type and mechanical cleaning of surface to make it free from any bituminous residue/dirt, oil and grease etc there after cracks treatment by cutting opencracks and cleaning it from dirt loose materials etc complete all as specified and directed by Engr-in-Charge 79 Providing and laying in position cement concrete of specified gradeexcluding the cost of centering and shuttering 1:2:4 type B1 (using 20 mm graded stone aggregated) complete all as specified and directed. 80 Material and Labour for applying water based polyurethane modified dispersion (single component cold applied, non toxic, VOC complaint) in 03 coats including 01 coat of primer of same material after dilution of water at 50% of specific primer matching same material as per manufacturer specification and complete all as specified and directed by GE /Engr-in Charge Properties of Poly urethane based chemical shall confirm to following Technical Parameters: (i) Highly elastic (ii) UV resistance (iii) Adhesion to concrete >1N/Sqmm (iv) Tensile strength not less than 2 0 N/Sq mm for free film (v) Elongation not less than 300%(vi) Solid content by weight not less than 60% (vii) Air/water permeability BSEN 12390 at 5 bar 72 hours should be NIL and minimum dry film thickness of water proofing membrane must be 1.0 mm(viii) Accelerated weathering (ASTM 453) Pass 1000 hours(ix) Reaction to fire- non inflammableNOTE :1.To be applied by the Rep ofmanufacturer’ s authorized applicator mentioned only. Contractor has to provide manufactrurer’s Test certificate for the above mentioned technical parameters. 2. For accessible terrace and inaccessible terrace. 300 mm height of vertical surface / parapet wall to be treated with same specification of slab 81 Demolition of Stone slabs flooring laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 metres leadcomplete all as specified and directed. 82 Material and labour for kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete all as specified and directed. 83 Dismantling steel work in built up sections in angles, tees, flats and channels including all gusset plates, bolts, nuts, cutting rivets, welding etc. including dismembering and stacking within 50 metres lead complete all as specified and directed. 84 Material and labour for steel work welded in buit up sections/framed work, inclduing cutting, hoisting, fixing in position and applying a priming coat of approved steel primer In stringers, treads, landings etc of stair cases including use of chequered plate wherever required complete all as specified and directed by Engr-in-Charge 85 Providing and fixingM.S. tubehand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer complete all as specified and directed. 86 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc fixed to steel window including priming coat with approved steel primer all complete all as specified and directed. 87 Material and labour for plinth protection 50mm thick in cement concrete 1:3:6 Type C1 (using 20 mm graded stone aggregated) over 75mm thick hard core of gauge n exc 40mm nominal size, well rammed and consolidated and grouted with fine sand, including expansion joint every 2m interval and necessary excavation, levelling & dressing & finishing the topeven and smooth complete all as specified and directed. 88 Taking down copper/aluminimum point wiring (Light, fan, socket or power Point) complete including fixture and fittings such as swithches, ceiling rose, pendants, regulators, sockets, light fitting etc removing materials to store for keeping in safe custody or for taking credit (Credit for above items should be made as per conditions separately) and making good disturbed surfaces for walls, floorsetccomplete all as specified and directed. 89 Taking down existing main switches, Industrial plug and socket & DBs along with MCB/MCCBs of any make, size and complete all as specified and directed 90 Dismatling of the ceiling fan/exhaust fan and painting the same with onecoat of spray painting with synthetic enamel paint of approved brand and manufacture to give an even shade, including cleaning of surface with detergent and replacing the damaged rubber reel, nuts and bolts with washers and safety pins, reinstalling the same as required complete all as specified and directed by Engr-in-Charge 91 Dismantling the existing sub main wiring/Power point wiring of any size and typealongwith PVC metalic conduit/casing/batten with fixtures and fittings complete all as specified and directed by Engr-in-Charge. 92 Group A Wiring for light point with 1.5 sq mm FRLS PVC insulated unsheathed copper conductor single core cable in surface / recessed medium class PVC conduit, with modular swtich, modular plate, suitable GI box and earthing the point with 1.5 sq mm FRLS PVC insulated copper conductor single core cable etc complete all as specified and directed. 93 All as per item No 94 here- in-before but for Fan point complete all as specified and directed. 94 All as per item No 94 here-in- before but for bell point complete all as specified and directed. 95 All as per item No 94 here-in- before butfor 5 Amp socket Point on independent board complete all as specified and directed. 96 Supplying and drawing 3 runs of 2.5 sq mm size of FRLS PVC insulated copper conductor, single core cables in the existing surface/recessed steel/PVC conduit as required. complete all as specified and directed. 97 Wiring for circuit/submain wiring alongwith earth wire with the 2 x 4 sq. mm + 1 x 4 sq. mm earth wire of FRLS PVC insulated unsheathed copper conductor, single core cable including surface/ recessed medium class PVC conduit as required complete all as specified and directed. 98 Supplying and fixing 15/16 Amps Modular switch on existing modular plate & switch box including connections but excluding modular plate etc. as requiredall as specified and directed. 99 Supplying and fixing 6 pin 15/16 Amps Modular socket outlet on existing modular plate & switch box including connections but excluding modular plate etc. as required complete all as specified and directed 100 Supplying and fixing 3 pin 5/6 Amps Modular socket outlet on existing modular plate & switch box including connections but excluding modular plate etc. complete all as specified and directed. 101 Supplying and fixing 3 module (100 mm x 75 mm) size/modules, GI box alongwith modular base & cover plate for modular switches in recess etc complete all as specified and dircted by Engr-in-Charge. 102 Supplying and fixing two module stepped type electronic fan regulator on the exising modular plate switch box including connections but excluding modular pate etc. complete all as specified and directed. 103 Supply and fixing Modular bell push 2 way on the existing modular plate & switch box including connections but excluding modular plate etc. complete all as specified and directed. 104 Supply and fixing Bell dingdong, 230V, AC, 50 Hz complete all as specified and directed. 105 Supply and fix LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose at any height complete all as specified and directed. 106 Supply and fixing Basic all purpose surface and wall mounted LED batten 10 Watt , 2 feet with aluminum housing & integrated electronic driver including 2 Core copper wire from ceiling rose to light fitting. complete all as specified and directed. 107 Supply and fixing Environmental friendly, ultra modern, energy saving, surface mounted, decorative hexagon bulk head Back-lit LED luminaire comprising of high brightness LEDs, 10 Watt, IP-66 complete all as specified and directed. 108 Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminium hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant inclduing thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed by Engr-in-Charge 109 Supply and fixing of 32/40 mm dia x 2.0 metre long GI pipe (medium class) bracket for mounting offluorescent/HPMV/HPSV/LED street light fitting on pole/wall including bending the pipe to the required shape, 2 Nos 40mm x 3mm flat iron clamps with nuts, bolts and wahser, painting the flat iron with primer and finish paint as required complete all as specified and directed. 110 Supply and fixing round Elegantly designed sleek surface mounted pressure die-cast aluminium luminaire 15 Watts in powder coated white finish in round profile with optimized heat sink for efficient heat dissipation and independent electronic LED driver and with 2 Core copper wire to light fitting complete all as specified and directed. 111 Supply and fixing 3 pin 5 A Ceiling rose on the existing junction box/ wooden block including connections etc. complete all as specified and directed. 112 Supplying and fixing 4 way (4 + 12), Double door, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415V, on recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc complete all as specified and directed (But without MCB/RCCB/Isolator) 113 Supplying and fixing 63A rating, four pole, 415V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. complete all as specified and directed. 114 Supplying and fixing 8 way, Double door, single pole and neutral, sheet steel, MCB distribution board, 240V, on surface/recess, complete with tinned copper bus bar, neutal bus bar, earth bar, din bar, internconnections, powder painted including earthing etc.complete all as specified and directed.. (But without MCB/RCCB/Isolator) 115 Supply and fixing 5 to 32 Amps rating , 240/415V, 10 KA C curve, miniature circuit breaker suitable for inductive load of single poles in the existing MCB DB complete with connections, testing and commissioining etccomplete all as specified and directed. 116 Supply and fixing 40 Amps rating, double pole, 240 Volts, isolator in the existing MCB DB complete with connections, testing and commissioining etccomplete all as specified and directed. 117 Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter,voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300 mm complete all as specified and directed. 118 Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required including taking down old unserviceable earthing complete all as specified and dircted by Engr-in-Charge. 119 Supply, fixing, flush to wall, fabrication, expoxy powder coating over a coat of red oxide primer for Meter box 4 rooms single phase made up of MS sheet 2 mm thick of size 0.9 x 0.9 x 0.3 mtrs including concealed in wall, MS angle irons, cable glands for incomming & outgoing, neoprene gasket for front door, provision for fixing of 4 nos MCB SPNfor meter connection and taking down old unserviceable meter boxcomplete all as specified and directed at site by Engineer-in-Charge 120 Providing and laying earth connection from earth electrode with 6 SWG dia GI wire in 15mm dia GI pipe from each electrode inclduing connection with GI thimble excavation and re-filling as required including taking down old unserviceable one complete all as specified and directed by Engr-in-Charge 121 Supply and fixing 20/32A, 240V, SPN Industrial type socket outlet, with 2 pole and earth, meal enclosed plug top alongwith 20/32A C curve, SP MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket outlet and complete wtih connections, testing and commissioning etc, as required complete all as specified and directed 122 Material and Labour for Chequered terrazo tiles 22 mm thick with graded marble chips of size up to 6 mm in floors, jointed with neat cement slurry mixed with pigment to match the shade of the tiles, including rubbing and polishing complete, laid over and including 20 mm thick bed of cement mortar 1:4.Light shade pigment using white complete all as specified and directed. 123 Demolishing brick work In cement mortar manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead complete all as specified and directed by Engineer-in-charge. 124 Material and labour for Brick work with common burnt clay With F.P.S.(non modular) bricks machine moulded perforated bricks of class designation 12.5 conforming to IS: 2222 in superstructure above plinth level up to floor five level in cement mortar 1:6complete all as specified and directed. 125 Material and Labour for Brickwork with subclass B bricks, straight or curved on plan exc 6m mean radius,built in C.M. 1:6completeall as specified and directed. 126 Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, including the cost of centering, shuttering and finishing 1:2:4 type B1 (unsing 20 mm graded stone agregate)nominal size complete all as specified and directed. 127 Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying Two Coatcomplete all as specified and directed. 128 Providing and fixing of GI pipes of size 20mm dia nominal bore medium grade complete with GI fittings and clamps on wall surface/terris including cutting, making good to the wall surfaces complete all as specified and directed by Engr-in-Charge 129 Providing and fixing of GI pipes of size 25mm dia nominal medium grade with GI fittings including trenching and refilling complete all as specified and directed by Engr-in-Charge 130 Supply and Fix in repair 20mm gun metal gate valves with iron wheel head, screwed both ends for iron pipe complete all as specified and directed. 131 Supply and Fix in repair 25mm gun metal gate valves with iron wheel head, screwed both ends for iron pipe complete all as specified and directed. 132 Providing and fixing ball valve (brass) of approved quality high or low pressure with plastic floats complete for size 20mm dia complete all as specified and directed by Engr-in-Charge 133 Constructing masonary chamber 90x90x100cm inside, in brick work in cement motar 1:4 for sluice valve with CI surface box 100 mm top diameter, 160mm bottom diameter and 180mm dep (inside) with chained lid and RCC top slab 1:2:4 mix type B1 (Using 20mm crushed stone aggregate) i.e. necessary excavation, foundation concrete 1:5:10 type C1 (using 40mm stone aggregate) and inside plastering with cement mortar 1:3,12mm thick finished with a floating coat of neat cement complete all as specified and directed by Engr-in-Charge 134 Taking down old unserviceable LT cables 35 sq mm size from ducts including disconnecting cables and stacking of cables within 50 metres leadcomplete all as specified and directed. 135 Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 35 sq mm 3.5core including necessary lugs, glauds and saddling on wall / surface complete all as specified and directed. 136 Excavation workby mechanical means (hydraulic excavator/Manual means) in foundation trenches or drains (not exc 15m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5m including getting out the extra excavated soil and disposal of surpls excavated soils as directed with the lead of 50 metre complete all as specified and directed by Engr-in-Charge 137 Demolition and breaking up drain pipes 150 mm dia (salt glazed ware or reinforced concrete) includingPCC bedding & hauching set in cement mortar of above dia pipe complete all as specified and directed. 138 Material and labour for 150mm dia reinforced cement concrete pipe class NP-2 laid and jointed complete with collars complete all as specified and directed. 139 Material and labour for Cement concrete1:5:10 Type E2 (using 40mm graded crushed stone agrregate all round SW pipes including bed concrete as per standard design in 150mm diametre SW pipe complete all as specified and directed by Engineer-in-Charge. 140 Cutting in to existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B1 using 20mm graded crushed stone aggregate smooth finished, and reformong benching as required for 150 mm dia pipe complete all as specified and directed. 141 Material and Labour for Constructing brick masonry manhole in cement mortar 1:4with R.C.C. top slab with 1:1.5:3using 20mm graded stone aggregate mix foundation concrete 1:4:8using 40mm graded stone aggregate mixinside plastering 12 mm thick with cement mortar 1:3finished with floating coat of neat cement and making channels in cement concrete 1:2:4 using aggregate 20 mm nominal size finished with a floating coat of neat cement complete as per standard design Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg(weight of cover 23 kg and weight of frame 15 kg) With fly ash old size brickscomplete all as specified and directed.
