special Repair Of Bldg No P-587 At Hisar Mil Stn Under Ge (W) Hisar-- 1 Taking down cement plaster incl racking out joints, hacking for key & scrubbing down with water etc complete all as specified and directed. 2 M&L for 10mm thick rendering in CM 1:6 over brick / concrete wall surfaces trowelled to even & smooth w/o using extra cement for internal wall surfaces complete all as specified and directed. 3 M&L for rendering 15 mm thick in CM 1:4 on stone/brick/ concrete masonry surfaces with using integral water proofing compound finished even and smooth without using extra cementupto three storeys complete all as specified and directed. 4 Providing and applying of 10mm thick hand applied Sika Monotop 122F single component, dual srinkage compensated thixotropic high strength formulation trawlable mortar on the brick wall including pointing of brick joint over a bond coat of sika latex (1:4:6) water cement and sika latex consumption @ 100 gm/sqm on the wall surfaces. the PMM should have compressive strength > 45 MPa in 28 days as per ASTM C 109 (7 cm cube) complete all as specified and directed. 5 Preparing the plaster of thickness up to 15mm over the brick masonry surface by providing and applying a bond coat of Sika Latex: Water: Cement - 1:4:6 with Sika Raintite-i consumption @100gm/sqm on the wall surface followed by hand mix of cementitious mortar 1:4 to be mixed with permeability reducing polymer Sika Raintite-i @ 400gm/sqm (6%) by weight of cementitious content at time of mixing with water as per manufacturers recommendations including all lead life, levelling the surface, curing etc complete all as specified and directed. 6 M&L for providing and fixing 12-16 mm dia injection ports non retunable nozzle by drilling, cleaning and sealing holes 50-75mm deep with fast setting high epoxy putty , solvent free , three component compound based on epoxy resins,graded fillers, and thixotropic agents as approved by GE as in beams, columns, slab and parapets as per the technical specifications and manufacturers instructions complete all as specified and directed. 7 Supply and apply of 3 parts, very low viscous elastic polyacrylic injection resin Sika @ Injection 306 with a versatile and adjustable reaction time having mixed viscosity: 3-11 M pa s at + 20 degree C, reaction time: adjustable according to ambient temperature and execution requirement between 8-50 Mins PH - 9-10. Tested as per wissbau No 2002- 094- (1A) function test with re- injectable hose system. The holes should be drilled until a depth of approx. 5 cm (for a 6cm thick wall) before the end of the wall is reached. Pump Sika @ injection- 306@ at > 20 bar into a behind fissures or into masonry joint which are allowing water to infiltrate into unwanted area if voids is masonry being injected contain insufficient moisture to activate the grout inject a small amount of water prior to injecting the grout when movement stop or Sika @ injection - 306 appears at the next packer move to the next packer and inject. If the dampness is heavy inject similarly at next joint line. Note: contractor will submit the warranty certificate of efflorescence for 10 years from date of completion of work complete all as specified and directed. 8 Making the grooves 10mmx10mm above coating area and fill with SIKAFLEX 127, single component, elastic, moisture curing, hybrid polyurethane based construction sealent and adhesive complete all as specified and as directed. Note: contractor will submit the warranty certificate of efflorescence for 10 years from date of completion of work complete all as specified and directed. 9 M&L Rendering 10 mm thick cement plaster on ceiling surfaces in CM(1:3) complete all as specified and directed. 10 M&L for complete removal of exsting treatment of old surfaces of walls by mechanical sander with internal dust extraction system complete all as specified and directed. 11 M&L for preparation of exsting/new plastered surfaces/brick surfaces by using mechanical grinder including washing down removing loose spalt/dust etc by applying one coat of exterior grade damp proof primer followed by one coat of acrylic wall care putty not less than 2 mm and applying two coats of exterior emulsion paint complete all as specified and as directed. Note: (i) Make of primer:- Asian, Berger, Nerolac (ii) Make of Exterior Emulsion Paint:- a) Asian- Apex Ultima, b) Berger- Weather Coatc) Nerolac- Excel Total (iii) The complete work should be carried out through with the help of Mechanical Paint mixer and Spray Painting (iv) All windows/glasses/ventilators or other similar items should be covered properly by polythene/paper etc before spraying. 12 M&L for preparation of old plastered/new plastered or unplastered surface of walls and applying wall care putty, not less than 2mm thick and smoothening the surface with sand papers and applying two coat of OBD over one coat of acrylic primer complete all as specified and directed. 13 M&L for preparing new plastered or unplastered surfacesand applying three coats of white wash on ceiling complete all as specified and directed. 14 M&L for preparation of old plastered or unplastered surfaces of ceiling / soffit and applying one coats of white wash complete all as specified and directed. 15 M&L for preparing two coats of synthetic enamel paint on steel/wooden surfaces of any description complete all as specified and directed. 16 M&L Non skid ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.09 sqm but not exceeding 0.18 sqm , in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match tiles over and including 15mm thick screed bed in CM 1:4including dismantling of old existing tiles complete all as specified and directed. 17 M&L Non skid ceramic coloured tiles 8 to 10 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm , in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match tiles over and including 15mm thick screed bed in CM 1:4including dismantling of old existing tiles complete all as specified and directed. 18 M&L for coloured glazed ceramic designer 3D pattern in combination of light and dark shade coloured tiles of size 300X600X7 mm thick as in vertical surface setand jointed in neat cement slurry andpointed flush in white cement with pigmentover and including 10mm thick baking coat in CM 1:3 including dismantling of old existing tiles complete all as specified and directed. 19 M&L for coloured vitrified tiles 8-10 mm thick (square/rectangular) of size 600mm x 1200 mmin floors etc set & jointedin neat cement slurry and flush pointed withwhite or coloured Epoxyto match, including 15mm thick screed bed in cement mortar 1:4including dismantling of old existing tiles complete all as specified and directed. 20 M&L for coloured vitrified tiles 8-10mm thick (square/rectangular) of size 600mm x 1200 mm as in vertical surfaces etc set & jointed with 3-5 mm tiling Spacer tool in neat cement slurry and flush pointed withwhite or coloured Epoxyto match, including 15mm thick screed bed in cement mortar 1:4including dismantling of old existing tiles complete all as specified and directed.. 21 M&L for 20-22mm thick machine cutKota stone flooring over cement screed base laid and jointed with grey cement slurrry mixed with pigments to match the shade of the slab including rubbing and polishing over and including 20mm thick screed bed in CM 1:3 complete all as specified and directed. 22 Description all as per item No 21.00 above but kota stone slab (100/150mm) and 20-22mm thick in riser of steps, skirting , dados and pillar laid over and including 10mm thick rendering to receive the stone in cement mortar and polishing complete all as 1:3 andjointed complete as in single piece kota stone has to be used complete all as specified and directed. 23 M&L 16-18mm Granite (of any type )work (table rubbed and polished ) in steps , jambs , pillars , window -cills ,cooking plateforms and like in cement mortar (1:4) including pointig in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over and including provision of screed bed 20mm thick in CM 1 :4incl demolition of old existing stones and complete all as specified and directed. 24 Rounding to edgesof stone edges such as in steps/ cooking platform and other similar situations complete all as specified and directed. 25 S&F pressed steel frames of size 125x60mm for doors with one or more rebates incl necessary fixing lugs , hinges, lock strike plate etc complete all as specified and directed. 26 S&F pressed steel frames of size 105x60mm for doors with one or more rebates incl necessary fixing lugs , hinges, lock strike plate etc complete all as specified and directed. 27 M&L for PCC 1:3:6 type C-1 (using 20mm Graded Stone Aggregate) as in filling of Chowkhatscomplete all as specified and directed. 28 S&F flush shutter 35 mm thick, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed. 29 S&F 35 mm thick 2nd class hardwood glazed and skeleton shutters, open rebated and prepare to receive glass, gauge etc (with sash bars) edges but divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers as specified in SSR Part-I Section 8 Clause 8.24(a), fitted to chowkats complete all as specified and directed. 30 S&F forStainlesssteel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wirestaples complete all as specified and directed. 31 S&F Floor door stopper of aluminium alloy body 50 mm long with rubber shoes complete all as specified and directed. 32 S&F 200mm long Mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed. 33 M&L for GI tubing 15mm bore fixed to walls, ceilings or laid in floors medium grade concealed and including taking down of pipe complete all as specified and directed. 34 Description all as per item No 33.00 above (15 mm) but refixing and taking down complete all as specified and directed. 35 M&L for GI tubing 20mm bore fixed to walls, ceilings or laid in floors medium grade concealed complete all as specified and directed. 36 Description all as per item No 35.00 above (20 mm) but refixing and taking down complete all as specified and directed. 37 M&L for Low density polyethylene pipes 25mm dia (LDPE) of pressure rating 6 kgf/cm2 fixed complete to walls,ceilings or in floors etc. as in over flow pipe complete all as specified and directed. 38 S&Fin repairs 15mm bore CP Bib taps Long Body Half turn/Quarter turn , cast copper alloy fancy type chromium plated and fixed complete all as specified and directed. 39 S&F in repair 15 mm dia CPAngle Cock, cast copper alloy, screwed down, high pressure, screwed both ends for iron pipe or for unions 15mm bore all ascomplete all as specified and directed. Make: Cera Cat No G1017201 or Essco Cat No MQT-526NKFN or Somany Cat No Chrome 272111370011 40 S& F in repair PVCconnection600 mmlong15mmdiacomplete all as specified and directed. 41 S&F in repair brass chromium plated Basin Mixer single lever for counter top WHBcomplete all as specified and directed. Make: Cera Cat No G1017451 or ESSCO Cat No COS-103051B or Somany 2721111140011 42 S&F in repairs 15mm dia 3 in 1 CP Brass wall mixture chromium plated fancy type for mixing hot and cold water screwed down for iron pipe and fixed in position complete all as specified and directed. Make: Cera Cat No. F1018401GG or ESSCO Cat No. STE-107273 or Somany Cat No 272201140011 43 S&F in repairs 15mm sink mixture chromium plated fancy type for mixing hot and cold water screwed down for iron pipe and fixed in position complete all as specified and directed. Make: Cera Cat No. F1018401GG or ESSCO Cat No. APR-101309N or Somany Cat No. 272201140061 44 S&F in repairs vitreous china one peice wash down water closet pan (padestal pattern ) includingP / S trap and soft close seat cover with hinging device and CP jet spray with hanging device all necessary work required for fixed in position complete all as specified and directed. Make: Cera Cat No. A1014110 or ESSCO Cat No. ECS-WHT-851S220SPPSM or Somany PABLO 45 S&F in repair vitreous china squatting pan ORISSA pattern size 580mmx440kmm, white with integral foot rest including cast iron P or S trap andconnection to trap includintg cement concrete, and to flushing pipe, anti-syphonage pipe, etc. including making good to floor, complete all as specified and directed. 46 S&F in repair CP cardiff brass cascade Health Faucet with hose (Min length 1.5mtr of CP brass) & hook of CP brass complete all as spd and directed. 47 S&F in repair vitreous china wash hand basin with pedestal (Size 515x420x195mm) colour brilliant / off white incl waste pipe and waste coupling over and includingpedestal and all other accessories complete all as specified and directed. Make: Cera Cat No S2030120 or Somany Cat No PLUTO or Essco Cat No. ECS-WHT-805 and ECS-WHT-301 48 S&F CP soap dish fixed to plugs with chromium plated brass screws complete all as specified and directed. 49 S&F in repair brass chromium plated shower rose 150mm size fitted to steel pipe or union along with leg and other fitting complete all as specified and directed. Make: Cera or Essco or Somany 50 S&F in repair for CP toilet roll holder fixed to wall with chromium plated brass screw complete all as specified and directed. Make: Cera Cat No F5013110CH or Essco AEC-1151N or Somany 272130740041 51 S&F in repair for toilet bath cabinet with mirror of size 600 X 450mm and approved make complete all as specified and directed. 52 S & F in repair brasschromium plated tubular Towel Rack 600mm Long with Lower Hangers, Stainless Steel complete all as specified and directed. Make: Cera Cat No F5011101CH or Essco AEC-1181NA or Somany 272130160081 53 M&L for treatment of sunken floor slab comprising of the following specifications with and including demolitionof PCC in sunken portion/ floors including removal of the debris outside the MOD land andcomplete all as specifiedand directed:- (i) Demolition of PCCin sunken portion /floors and Cleaning the sunken/lowered portion of RCC slab surface (including vertical total depth plus skirting height) of floors by wire brush, chisel out any mortar sticking to the surface and brooming completely.Provision of 40mm thick avg PCC 1:2:4 type B-0 using 12.5mm graded aggregate as in padding concrete to achieve proper slope including S& f in repair 40 mm dia , 450 mm long medium grade spout pipeand cutting holes in bricks or RCC wall for the same (ii) Rendering of uneven surfaces atbottom and sides up to floor level with 15 mm thick CM 1:4 mixed with and including integral water proofing compoundas approved by GE @ 0.2% by wt of cement consumed including filling it with water to check dampness and seppage and where dampness / seppage is noticed, nozzles shall be fixed and grouting carried out. (iii)All junctions points of side wall where CI/GI/PVC pipes are passing through shall be sealed with epoxy puttyas approved by GE. (iv)After drying putty, wash the slab and sides of sunken portion with water and make it clear and clean.(v) Applying two coats of polymer modified cementious water proof coating with as approved by GE in two coats @ 3kg/sqm to sanwiched with glass fibre reinforcemn as approved by GE over base coat as per mnaufacturers instruction to bottom and vertical sides up to finished floor level+100mm height.The thickness of two layer shall be 1mm.When the second layer is still sticky, coarse sand spray shall be carried for the vertical and bottom surface of the sunken portion. (vi)Allpipes laid in sunken portion shall be covered with 50mm thick PCC 1:3:6 all round after painting with anticorrosive paint . (vii) The sunken floor shall be filled with lean concrete 1:5:10, type E2(40 mm graded aggregate) Note :- Test the water proofed area (ponding test) by filling water for at least 72 hours and tested for leakage seepage and to the entire satisfaction of GE. Test record for each sunkenslab shall be maintained.The treatment shall be carried out by authorised applicators of chemicals. Cost of testing and all M&L is inclued in the rates quoted above. 54 Supply only water proofing compound complete all as specified and directed. 55 S&F, PVC floor trap 75mm bore with grating incl jointing with solvent cementfixed in cement concrete type B1 (1:2:4) complete all as specified and directed. 56 S&F110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls & floors with necessary MS clampscomplete all as specified and directed. 57 S&F75 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls & floors with necessary MS clampscomplete all as specified and directed. 58 S&F 110 mm PVC (SWR) access door bends any radiuscomplete all as specified and directed. 59 S&F 75 mm PVC (SWR) access door bends any radiuscomplete all as specified and directed. 60 S&F 110mm PVC (SWR) junction single,(Single T) equal or unequal provided with access door complete all as specified and directed. 61 S&F 75mm PVC (SWR) junction single,(Single T) equal or unequal provided with access door complete all as specified and directed. 62 S&F 110mm PVC PVC (SWR) vent cowl complete all as specified and directed. 63 Supply and fixing in repair rotional molded polythylenewater storage tank three layer white 500 ltr capacity, triple layer (Cylinderical vertical with closed top) hoisted kand fixed in position complete all as specified including dismantling of old tank of any type and complete all as specified and directed. 64 Supply and fixing in repair rotional molded polythylenewater storage tank three layer white 1000 ltr capacity, triple layer (Cylinderical vertical with closed top) hoisted kand fixed in position complete all as specified including dismantling of oldtank of any type and complete all as specified and directed. 65 S&F 20mm dia ball valves high pressure of PTMTwith epoxy coated alluminium rod and high density plastic ball screwed for iron pipe and fixed complete all as specified and directed. 66 S & F in repair gun-metal, globe or gate valves of 20mm dia, with iron wheel head, screwed both ends for iron pipe and fixed etc complete all as specified and directed. 67 Taking down chowkats or frame with shutter, without taking off shutter from the frames area exc 1.5 sqm but not exc 4sqm each complete all as specified and directed. 68 Taking down chowkats or framewithout taking off shutters(with or without glazingand ventilator) not exc 1.5 Sqm each complete all as specified and directed.. 69 Providing and fixing factory made UPVC white colour Three track sliding 88x52mm, (2/4 shutter ) glass and wire mesh shutter windows, made ofreinforcement frame 60mm x 22 mm, sliding glass window sash 78mm x 60mm, reinforcement sash 30mmx18 mm, sliding mesh sash 78mmx50mm, reinforcement mesh sash 26mmx10mm, sliding interlock for window and sliding glazing bead 24.5 mm x 16mm, one panel (position as directed by Engr in cahrge) will be fixed and diveded in two portion fixed with 4mm thick plain clear glaas , mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc, making arrangement for fixing of hardware EPDM gasket 1.2 ± 0.2 mm thick, galvanised steel frame (28mm x 21.5mm), T profile (27mm x 17mm) to be inserted in requrred profile. Frame will be fixed to the wall with 8mm x 100mm long fasteners.Hardware Handle to slide shutter , sliding locking system and 4 mm thick glazing with selected quality glass and stain less steel wire mesh of gauge 0.56 nominal dia of wire and average width of aperture 1.18mm, complete to fix in all respect. Make: NCL VEKA ,H2O Solution, Madhu Industries or FENESTA Note:- The window of room no 1&2of all four qtrs shall be dIvided vertically in two part, two third of the window shall be sliding window in three track sliding channel and remaining one third part shall be devided in two part horizontally, the upper one panel shallbe with 4mm thick fixed plain clear glass and lower panel with one openable shutter fixed with 4 mm thick plain clear gass as opening to window AC. The unit rate quoted by contractor includes both glass and wire gauge shutter, cost of4 mm thick plain clear glass, stainless steel wire gauge of 0.56 nominal dia of wire and average width of aperture 1.18mm, MS Grill of 12mm square bar @ 150 mm center to center and all other connected accssories. Net Opening will be measured for payment purpose. 70 Providing and fixing factory made UPVC white colour casement (Openable) glass and gauge window made of extruded profiles with wall thickness of 2.3 mm ± 0.2 mm) window profile with hollow section with multi chamber, frame (116mm x 58mm), Sash (60mm x 73mm), T profile (One verticle length in between two shutters) (60mm x 74mm), Glazing beads (35mm x 20mm) will be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc, making arrangement for fixing of hardware EPDM gasket 1.2± 0.2 mm thick, galvanised steel frame(28mm x 21.5mm), T profile (27mm x 17mm) to be inserted in requred profile. Frame will be fixed to the wall with 8mm x 100mm long fasteners,including 12 mm MS square bar @ 150 mm c/c , as grill will be providedbetween two shutters . Make: NCL Veka ,H2O Solution, Madhu Industries or FENESTA Hardware Casement handle made of Zinc alloyed (white powder coated), Butt hinges of zinc alloyed (White powder coated), transmission gear made of mild steel with multi point locking system and 4 mm thick glazing with selected quality glass and stainless steel wire gauge. Note:- The unit rate quoted by contractor includes both glass and wire gauge shutter, cost of4 mm thick plain clear glass, stainless steel wire gauge of 0.56 nominal dia of wire and average width of aperture 1.18mm, MS Grill of 12mm square bar @ 150 mm center to center and all other connected accssories. Net Opening will be measured for payment purpose) 71 Providing and fixing ,factory made 100% solid WPC (woodpolymer composite)- door frame of size50mmx75mm made from wood polymer composite (single extruded process) material comprising of virgin PVC polymer of K value 57-60(suspensive Grade), calcium carbonate and natural fibers (wood powder/rice Husk/wheat husk) and non toxic additivies fabricated with meter joints after applying PVC solvent cement & screwed with full body threaded star headed screws having minium frame density of 780Kg/cbm manufacture by and ISO 9001-2015 certified company, having good screw holding capacity (Screw withdrawel strength of (Min 990N/mm, minimum copressive strength of 58N/mm2, modules of elasticity 900N/mm2 and resistance to spread of flame of class A category with property of being termite/borer proof,water/moisture proof & fire retardent & fixed in position with SS draft fasteners/hold fast of required dia and length for external uses complete all as specified and directed. 72 providing and fixing ,30mm thick factory made 100% solid WPC (wood polymer composite) solid plain/prelam/enrouted plain/enrouted painted flush door shutter of required size comprising of virgin PVC resin of K value 57-60(suspension grade) calclum carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives made from Extrusion process WPC foam sheet single extruded (inner) with density not less than 650 kg/cbm manufacture by an ISO 9001-2015 certificate company, having good screw holding capcity (screw withdrawl strength of 2000 n (face) and 1100 N (edge) minimum copmressive strength of 50 n/mm2, Modulus of elasticity 850/N/mm2 and resistance of spread flame of class A category with propertyof being termite/borer free, water/moisture proof, fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headedcounter sunk SS screws for WC/bathroom/toilet/Kitchen/Balcony doors complete all as specified and directed. 73 S&F steel window box type with side hung shutters Factory made including box type hinges with steel handle and steel peg stay complete with glazing bars devetailed or welded.The rates include for painting with one shop coat of zinc chromate primercomplete all as specified and directed. 74 S&F steel window box type with side hung shutters Factory made including box type hinges with steel handle and steel peg stay complete w/o glazing bars devetailed or welded. The rates include for painting with one shop coat of zinc chromate primercomplete all as specified and directed. 75 M&L Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks, hand rails, cupboards frame and similar work con- forming to Fe.290.Gde-E-165 with and including necessary cutting and weldingcomplete all as specified and directed. 76 Supply and fixingacrylic transparent sheets3mm thick in square / rectangular area of each pane not exc 0.5 sqmand fixed /lock with window frame by using PVC snap beeding with necessary self tapping reviting / screwing and suitable method with complete all as specified and directed. 77 M&L plain PVC solid Board ,18/19 mm thick , balancing white lamination including 1mm thick approved sunmica on external visible faces and as directed by Engr-in-charge, including pasting with solvent chemical as required at site or fixed with screws complete as in Kitchen Cupboard, room cupboard ,shelves / partition incl fixing arrangement on walls all as spd and directed by Engr-In-Charge including taking down of cupboard complete all as specified and directed. 78 S&F superior quality ,heavy typeSSrail (grade -304) (Curtain rod/drapery rod), 20mm diawith and including fency type SS bracket 2 Nos foreach opening andSSside Knob (fency type) of required shape and size 2 Nos of each opening complete all as specified and directed. 79 Demolition of cement concrete (un reinforced) in ground floors and paving not exc 15cm thick below or above ground level including removal of other things complete all as specified and directed. 80 M&L Brick work with burnt bricks, straight or curved on plan exc 6m mean radius, built in CM 1:4 and including demolition of brickwork complete all as specified and directed. 81 Dismantling brick tiles in single layer on roof (laid dry and pointed) complete all as specified and directed. 82 Demolition Mud in roofs, any thickness,including plastering and leeping (whether full thickness removed or only a part thereof)and removing debries out of MD land complete all as specified and directed. 83 M&L for providing cement concrete 1:2:4 type B1 (using 12.5 mm graded stone aggregate) as in roof kerbs, Roof padding finishing surface of concrete topping even and fair(without using extra cement) all as specified of average thickness in slope 1:40 over roof complete all as specified and directed. 84 M&L Screed bed or bedding layer of mortar 10mm thick in cement mortar 1:3 and finishing even and smooth with mixing of liquid WPC on roof surfaces complete all as specified and directed. Note : WPC shall be measured and paid seperately. 85 M&L for applying roof treatment on top of roof with APP modified membrane (minimum 3mm thick) weighing not less than 3Kg per Sqm, consisting of 90 micron center core HMHDPE (High molecular high density polyethylence) with white mineral gravel finish on upper side of membrane laid by torch application method with overlap 100 on length and 100mm on the width side as per manufactures instructions over a coatof hot air blown grade bitumen 85/25 @ 1.20Kg/Sqm over a coat of approved cold applied bituminous oil based primer (IS-3384) @ 300 gm/sqm complete APP membrane complete all as specified and directed. 86 M& L for 75mm thick PCC 1:3:6type C-2 (Using 20mm gradede crushed stone aggregate ) as in plinth protection including mastic filling in joints complete all as specified and directed. 87 Demolition of RCC Roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work and making good the disturbed area in CM 1:3 complete all as specified and directed. 88 Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement complete all as specified and directed. 89 Excavating in trenches, not exceeding 1.5m wide and not exceeding 1.5m in depth for foundation, etc or not exceeding 10 Sqm on plan and not exceeding 1.5m in depth for shafts, cesspits, manholes, pier holes, etc and getting out in soft/loose soil complete all as specified and directed. 90 Returning, filling in excavated approved soil, including spreading, levelling, watering and well ramming in layers not exceeding 25cm each complete all as specified and directed. 91 Removing excavated soil not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed. 92 S&F 150 mm dia(6) reinforced concrete pipes,class NP2 with one collar per length of pipe and laid in trenches or in floors including clearing of site as per site requirement complete all as specified and directed. 93 Demolition and breaking up drain pipes (salt glazed ware or RCC or PVC) set in cement mortar 150 mm dia complete all as specified and directed. 94 M&L for PCC 1:3:6 type C-2 using 40mm graded stone aggregate for concrete bed to drain pipes including packing under and haunching against the sides of pipe after they are laid and tested complete for 150mm dia pipe complete all as specified and directed. 95 Cutting into existing manholes for connecting new drains, 150mm bore, making good to pipe and rendering, cutting out existing benching for and forming branch channel (½ round or ¾ section) in cement concrete 1:2:4 type B1 smooth finished, and reforming benching as required complete all as specified and directed. 96 Mild steel TMT bars 6 mm and above dia and over as reinforcement for concrete, cut to length, bent to shape required, including cranking, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed. 97 M&L for precast reinforced cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate in cover slabs for manholes (square / rectangular / circular of any type and size with Angle iron bend to shape of manhole etc, shelves and similar articles with plain faces including necessary formwork and setting in cement mortar 1:4 including necessary use and waste of formwork and demolition of existing RCC cover slabs complete all as specified and directed. 98 Providing and laying 60mm thick factory made chamfered edge cement colouredconcrete paver block of M-35 grade with approved colour,design & pattern as in footparth, parks,lawns, drive ways or light traffic parking etc.,of required strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & patternover and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed. 99 Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and directed. 100 M&L for Providing cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate in coping & benching including weathering, slightly rounded or chamfered angles and throating as directed including necessary form work, finished even and smooth using extra cement complete all as specified and directed. 101 S & F in repairs, for wall mounted kitchen plate rack of size 900 x 600 x 250mm made cut of 1.00mm thick stainless steel sheet of 304 AISI grade design as epr directed by E in charge fixed to walls with required size of raw plug and steel screws as per manufacturer instructions . of first quality complete all as specified and directed. 102 S & F in repair Sinks with drainage board of size 915mm x 460mm and bowl size 410mm x 330mm x 160mm, made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including supply & fixing cantilever brackets of mild steel angle 25 x 25 x 5 mm and including CP waste coupling and PVC Waste pipe of standard size complete all as specified and directed. 103 S&F for stainless steel modular Kitchen basket incl PVC cabinet as required size for 17”x20” ht 6” for cutlery (bowl, tumbler and like) with wired bottom using 6mm rod of grade 304 stainless rod as per approved design and pattern incl necessary drawer slides of required size and chromium plated folding handles 75mm size for drawersy complete all as specified and directed. 104 Description all as per item No 103 above but with plain bottom for ht 4 cutlery (spoon,knife and like) complete all as specified and directed. 105 Description all as per item No 103 abovebutht 8” for plates/thali. complete all as specified and directed. 106 Supply and apply of rust remover cum passivator to remove rust from existing reinforcement by using product as approved by GE, with density 1.01 Kg/ltr at 30 degree celsius and consumption : 0.2 Kg/Sqm/coat complete all as specified and directed. Note: The material to be applied thoroughly on exposed rebars only with the help of a brush of suitable size. The area will be measured as length of bar x two times the dia of bar). 107 Supply and apply a cement based polymer modified rebar corrosion protection system to existing reinforcement using cement based polymer modified rebar corrosion protection system with consumption : 3.75 kg/Sqm for two coats andProduct requirements: carbonation resistance: 2 mm of chemical compoundas approved by GE corresponds to 20 mm of normal mortar; bond strength > 1N / Sqmm according to ASTM C 882-78 complete all as specified and directed. Note: The mtrl to be applied thoroughly on exposed rebars only with the help of a brush of suitable size. The area will be measured as length of bar x two times the dia of bar) 108 M&L for Providing, mixing & applying two component Epoxy resin concrete Bonding coat on prepared RCC surfaces as per manufacturers specification including prepartaion of surface throughly and cleaning complete where ever requiredwith usingProduc as approved by GE with Consumption: 0.4 kg/Sqm and Product requirements: Complies with ASTMC 881-78, Type II Grade 2 Class B+C complete all as specified and directed. 109 M&L for providing by mixing and trowel application of prepacked, light weight, two component structural grade polymer modified fibre reinforced thixotropic cement mortaras approved by GE at an average thickness exceeding 10mm and upto 25mm to the prepared concrete surface in soffit of slabs, beam, columns, parapets, fins and facias at any height, including finishing of applied Polymer mortaras per thetechnical specifications and manufacturers instructions complete all as specified and directed. 110 Taking down carefully copper/ Aluminium point wiring ( light, fans, socket, power socket) complete including taking out existing unserviceable terminal boxes and conduit with switches/sockets/fan regulators and fittings such as ceiling roses, pendants, tube lights fittings lamp holders, brackets light fittings, rectangular blocks DB MCCB etc and making good disturbed surface of wall/ floor etcto matchwith the existing the surface etc complete all as specified and directed. 111 Material and labour for point wiring with 1.5 sqmm (22/.3mm) PVC insulated and unsheathed FRLS single core multistranded copper conductor for one light/fan/bell point in and including PVC rigid non metallic concealed conduit 19/20 mm dia medium duty, ISI marked to beterminated & including pressed modular steel boxes & cover plate of module as required on site.including 1.5 sqmm (22/.3mm) PVC insulated and unsheathed FRLS single core multisrtanedcopper earthcontinuity conductor controlled by one switchand/or one regulator complete including repairing the surfaces in Cm 1:3 and finishingthe surface as per existing treatment complete all as specified and directed. 112 Description all as per item No 111.00 above but One three pin 5 Amp socket outlet point on independent board controlled by one nos, one way switch on independent board complete all as specified and directed. 113 Description all as per item No 111.00 above butOne three pin 5 Amp socket outlet point on same board controlled by one nos, one way switch on same board complete all as specified and directed. 114 Description all as per item No 111.00 above but point wiring with 2.5 sq mm single core FRLS cables and earth continuity wire with 2.5 Sq mm single core cable for one 3 pin 15 Amps socket out let point controlled by one nos, one way switch on independent board complete all as specified and directed. 115 S&F Modular switch 1 way 6A 1 module Single pole, one way, 230 volts all as specified and directed 116 S&F Modular switch 1 way 16A 1 module all as specified and directed 117 S&F Modular socket 6A -2/3 pin combined 2 module type 230 volts AC complete all as specified and directed. 118 S&F Modular socket 6A/16A -2/3 pin combined 2 module type AC complete all as specified and directed. 119 M&L Buzzer, Ding Dong AC 230 volts, single pole ISI Marked completed all as specified and directed 120 Supply and fixing modular bell push 6A 1 module complete all as specified and directed. 121 S&F Modular lamp holder, insulated body with back plate suitable for batten fittings and complete all as specified and directed. 122 Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. 123 S&F Modular ceiling rose surface bakelite 65mm x 50mm, 3 terminals with back plate etc complete all as specified and directed. 124 S&F modularfan step regulator 120W-2 module suitable for 1200/1400 mm sweep ceiling fan etc complete all as specified and directed. 125 S & F for wall mounted LED tube light fitting 20 watts batten not less than 120 lumen/watt for surface mounted, high transmissitivity diffuser, high lumen outputboxtype fitting, 230 volts and intregrated electronic driverconnector block etc complete with all accessories internally pre wired andnecessary mounting arrangements, provision of new 3 core multistrandedcopper conductor of size 23/0.193 from ceiling rose to fitting complete all as specified and as directed. 126 S&F Sheet metal enclosure distribution board SPN,8 way, double door powder coated, protection class IP-42 suitable for mounting MCB DBs confirming to IS-13032, IS-8632,BS5484 with min 200 Amp raiting copper bus bar complete all as specified and directed. 127 Supply and fixing in repair MCBs SP6 to 40Amps, B-curve, 240 volts, 10 KA rupturing capacity, IS-8828 marked, of the under mentioned type and rating and fixing in DBs (DBs Catered separately in this schedule) complete all as specified and directed. Note:Make of the MCB should be the same as that of DB 128 Supply and fixing in repair MCBs SPN 40 Amps,240 volts, 10 KA rupturing capacity, IS-8828 marked, of the under mentioned type and rating and fixing in DBs (DBs Catered separately in this schedule) complete all as specified and directed.Note:Make of the MCB should be the same as that of DB 129 S&F Sheet metal enclosure distribution board TPN, 4way, double door powder coated, protection class IP-54, isolated neutral bar, mechanical impact strength IK 09 suitable for mounting MCB & /MCCB DBs confirming to IS-13032, IS-8632,BS5484 with min 200 Amp raiting copper bus bar and grouting, fixing on wall with nut bolts wasshers properwithpcc works complete all as specified and directed. 130 Supply and fixing TPN63 Amps,415 volts, 16 KA rupturing capacity, IS-8828 marked, of the under mentioned type and rating and fixing in DBs (DBs Catered separately in this schedule) complete all as specified and directed.Note:Make of the MCCB should be the same as that of DB 131 S & F in repair for Energy saving new generation environmental friendly long life versatile pressure die cast aluminium IP 66 for security light fitting luminaire with high power LEDs as light source not less than 120 lumen/watt and electronic driver of capacity 25/35 watts with pre wired andnecessary mounting arrangements and provision of 1.5 sq mm three core copper conductor cable multi stranded from ceiling rose to light fitting including 40 mm dia GI pipe medium grade bracket 1.5 mtr long bend to required shape with clamps, nut, bolts complete all as specified and directed. 132 Taking down old unserviceable submain wiring including fitting & fixtures and making good of the surface to match with the existing complete all as specified and directed. 133 M & L forSub main wiring with approved colour coding as per IS with two single core PVC insulated FRLS cable with stranded copper conductor of size 6 Sq mm nominal area and drawing into suitable size of PVC non metallic rigid heavy duty PVC conduit of white/ ivory colour and its accessories ISI marked heavy duty of suitable sizeincluding concealed in wall etcone run of PVC insulated with 6.0 Sqmm (nominal area) stranded copper conductor FRLS cable as earth wire complete all as specified and as directed. Note:- Two runs of 6 sqmm cable for phase, one run of 6 sqmm cable for earthing and one run of PVC conduit will be measured as one unit. 134 M & L for earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6 mm thick buried directly in ground vertically (earth pit not less than 2.25m deep below ground level) with top edge of the plate not less than 1.50 mtr deep below normal ground level, connecting to GI earth wire 4mm dia by means of bolts, nuts, check nuts, and washers of galvanized iron or steel including 15 mm dia. medium grade protection pipe for earth lead complete with charcoal and common salt including watering arrangement with galvanized iron pipe light grade 20 mm dia, PCC Chamber, CI frame and cover, MS funnel with wire mesh all as shown in electrical plate no 3 of SSR part I including excavation and earthwork in any type ofsoil/strata and testing on completion. Note:- GI earth wire 4 mm dia and 15 mm dia protection pipe upto 7.5 mtr from earth plate is deemed to be included in rate quoted. 135 Taking down old unserviceable Ceiling fan and refixing the same after re-winding the fans and painting with white enameled paint with smooth surface complete all as specified and directed. 136 M&L for providing/cutting the round/ square hole of required size in wall finishing the same for disturbed surfaces complete all as specified and supply and fixing propeller type ac ventilating fans, single phase , 230 volts 250 mm sweep complete and grouting the ragged bolts in wall fixing the frame on the exhaust side (outer surface of the wall) and connecting with and including PVC insulated three core 1.5 sqmm copper cable from ceiling rose to exhaust fan motor complete all as specified and directed. 137 S&F wall decorative light with 5 watt LED Bulb in warm white colour sparkler WL 1LS E 27 COP WHT PC in brass bodycomplete all as specified and directed. Make : Havells and its equivalent
