Special Repairs To Bldg No P 34 Md Accn At Vnc Under Ge Central Bangalore- 1 Taking down cement plaster of any description including racking out joints, hacking for key scrubbing down with water etc andremoval of entire debris as ordered outside MD land complete all as directed. 2 Demolition of cement concrete (un-reinforced) in ground floor and paving not exc 15 cm thick above or below ground level and removalof entire debris as ordered outside MD land complete all as directed. 3 Demolition of unreinforced cement concrete as in roofs, floors (other than ground floors), in any description of beams, staircases, landing, chaj-jas etc including removingof existingAPP membrane any thickness / Screed any thickness etc and removalofentiredebris as ordered outside MD land complete all as directed. 4 Demolition of brickwork , block masonryor stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc and removal of debris as ordered outside MD land complete all as directed. 5 Dismantling boarding, any description, fixed in any position with nails. Complete all as directed. 6 Dismantling of wrought iron or mild steel work of any description not otherwise provided for in this Schedule all as directed 7 Dismantling floor, hearth or wall tiling inluding cement mortar bedding (but not backing), stackingserviceable tiles at site andremoval of entire debris as ordered outside MD land complete all as directed. 8 Demolition of stone slabs and tiles of any description or thickness in floors, platform, aprons etc., laid, bedded and pointed in any mortar ,stackingserviceable slbs at site andremoval of entire debris as ordered outside MOD land complete all as directed. 9 Taking down chowkats or frames not exc 1.5 sqm each with shutters (without taking off shutters from frame) and stacking at site where directed. 10 All as per item 9here-in-above but exceeding 1.5 Sqm but not exceeding 4 Sqm each 11 Excavation in trenches and not exe. 1.5 m wide and not exe. 1.5 m in depth for foundation of drain, man hole, laying of UGcables etc. not exe. 10 Sq. m on plan and not exe. 1.5 m depth and getting out in soft/loose soil complete all as specified and directed. 12 Returning filling in trenches including spreading, leveling,watering and well ramming in layers not exceeding 25 cm thick in soft rock complete all as specified and directed 13 Removing excavated surplus soil to a distance not exceeding 50 mtsand depositing where directed .at a level not exceeding1.5 M above the starting point complete all as directed. 14 M&L for anti-termite treatment to the soil along with external perimeter of building at the rate of 2.25 litre of emulsion per metre of the perimeter wall complete all as specified & as directed 15 M & L for PCC1 :5 : 10 type E2 using 40 mm gradedcrushed stone aggregate as in foundation filling, sunken repairing &mass concrete complete all as specified and directed 16 M&L for plain cement concrete 1:2:4 type B0 using 12.5mm graded crushed stone aggregate as inpadding over roof / chajja finished even & smooth without using extra cement complete all as directed. 17 M&L factory made pre cast PCC 1:3:6, type C1 (using 20 mm graded granite aggregate) as in block masonry with solid blocks, exceeding 10 cm in width and setting in CM 1:6 complete all as specified. 18 All sameas per itemNo 17 here-in-above but solid blocks not exceeding 10 cm thick -do- 19 Supply onlyIntegral Water Proofing Compound (ISI Marked) of Make : CICO,Acco Proof, Impermo, Aqua flex as approved. 20 M&L for cutting holes in stone walls built in cement mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or PCC 1:2:4 type B0 using 12.5mm graded crushed stone aggregate as required, exc half brick & not exc one brick (Depth of embedded portion of holdfasts or lugs measured from the face of the jamb into the wall). 21 S&F factory made pressed steel frames of size 125x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc, mild steel sheet of 1.25 mm thickness includingfillingthe hollow section of steelframe withPCC 1:2;4 typeBo using 12.5 mm graded crushed stoneaggregrate tothe entire hollow section tothe satisfaction ofEngineer-in-charge , complete as specified & as directed. 22 S&F factory made pressed steel frames of size 105 x 106mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc, mild steel sheet of 1.25 mm thickness includingfillingthe hollow section of steelframe withPCC 1:2;4 typeBo using 12.5 mm graded crushed stoneaggregrate tothe entire hollow section tothe satisfaction ofEngineer-in-charge , complete as specified & as directed. 23 S&F Second class hard wood factory made kiln - seasoned, plain, solid, straight chowkats and frames , wrought, framed, rebated on the solid, rounded or chamfered , put togetherwith glue, pinned at joints and fixed in position complete all as directed. 24 S&F solid PVC door frame of size 50X47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube supplying and fixing in opening as per specification all as directed. 25 S &F30 mm thick second class hard wood factory made glazed and skeleton shutter open rebated and prepared to receive glass, guage etc edge of framing plain chamfered or rounded fitted with cut and mitred beads for securing guage etc size of members of shutter as specified in SSR Part I Section 8 clause 8.24 (a) supplied and fitted to chowkats. 26 S&F 30 mm thick Flush shutters, solid core construction, with block coard core & plywood face panels commercial type on both side conforming to IS 2202 (Part- I) -1999, including internal liping beading all round fixed as in Door Shutter,Cup board shutter & Kitchen rack allas specified. 27 S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with plain colour single piece extruded PVC profile ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for styles and plain colour single piece extruded PVC profile for top rail lock rail bottom rail on either side and as gap insert for Top rail and bottom rail paneling of plain colour PVC sheet to fitted on the MS frame welded/sealed to the styles and rails with suitable PVC sheet beading and joined together with solvent cement. 28 S&F 19mm thick MDF Board both side finished as in wardrobe no of compartments & Drawersallas specified and as directed by Engineer-in-Charge. 29 M&L for 18 mm thick factorypressed PVC ply bothsides plain cut tosize and fixed as in kitchen cupboard / Cupboards including providing stainlesssteel hinges , handles ,SS screws etc as ordered , provided& fixed in position toany type offrameor in wall complete allas directed by Engineer-in-Charge. 30 S & F100 mm long aluminium, anodised , barrel tower bolt (ISI marked) of extruded section and fixed. 31 S & F150 mm long aluminium, anodised , barrel tower bolt (ISI marked) of extruded section and fixed. 32 S&F 75 mm sizebutt hinges extruded aluminium alloy with galvanized mild steel hinge pin, anodized type C-21 complete all as specified 33 S&F100 mm size butt hinges, medium weight coldrolled mild steel and fixed . 34 S&F 100 mm size aluminium alloy handles (ISI Marked) fabricated type anodisedand fixed. 35 S&F 150 mm size aluminium alloy handles (ISI Marked) fabricated type anodisedand fixed. 36 S&F300 mm long aluminium alloy, anodised sliding door bolt (ISI Marked) with hasp, staple (bolt type) and fixing clip of sheet cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed. 37 Supply & fixing hasp and staple of size 100mm aluminium anodized safety type with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified 38 S&F 15 mm diaMagic Eye fixedtoany description ofdoor complete all as specified 39 S&F magnetic catcher with 8 mm diasteel ball & brass body and strike plateincluding letting in and fixedcomplete all as specified 40 S&F Floor door stopper of aluminium alloy body and tongue, anodized, with hard drawn steel spring, fixed in floor, overall length of cover plate 150mm complete all as specified 41 S&F continuous (piano) hinges, mild steel, bright finish or electro galvanized width of flaps 30mm (when open) fixed with CP steel screws complete all as specified and as directed. 42 S&F mild steel helical door spring 300mm ordinary rat tail rod pattern spring including roller and roller plate, welded to steel frame, including making suitable cut out in wall and making good in CM 1:4 complete all as specified & directed 43 S&F in repair 25mm dia aluminium anodised decorative type curtain rods. fixed with CP steel screws complete all as specified and as directed. 44 S&F in repair decorative type curtain rod brackets. 45 S&F in repairs Brass chromiun platedtubular towel rail, 20mm dia ‘D’ type, 60CM long between flanges, fixed in repair. 46 S&F Powder coated aluminium sliding window (three way) frame & shutter with glazed shutter and without miremesh shutter /skeleton section with & including the following:-(i) Aluminium frame section 116x36.50x1.80mm.(ii) Aluminium shutter glazed/skeleton section 50x20x1.50mm thick.(iii) Aluminium grill size 50mmx50mm and 4 to 5mm thick bars complete all as specified.(iv) Fixing arrangements legs in hold fast in walls incl PCC (1:3:6) making goog distributed surfaces complete in originally shape.(v) 4mm thick glass orinary quality and fixed with rubber gasket for with glazed shutter etc.(vi) Stainless steelwire mesh 0.36mm nominal dia avg aperature 1.14mm and fixed with rubber gasket for without glazed shutter etc.(vii) Aluminium disc /bow hanle and locking system complete 47 S&F Powder coated aluminium Ventilator (partially fixed glazing and Partially louvered glazing) with arrangement for exhaust fan & includethe following:-(i) Aluminium frame section 45x25x1.80mm.(ii) Fixing arrangements legs in hold fast in walls incl PCC (1:3:6) making goog distributed surfaces complete in originally shape.(iii) 4mm thick frosted glass orinary quality (partially fixed glazing and Partially louvered glazing) and fixed with rubber gasket for with glazed shutter etc. 48 Supply onlystainless steelwire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mmand fixed with stainless steel wire staples for steelwindow . 49 S&F bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required, hooks (stay), heavy, for large gates, hook and pintle hinges, large hasps and staples, chains, hand made sliding bolts, clamps, hold fasts, wall ties, hooks for hanging fans, plain angle cleats for securing purlins to trusses or rafters, knee piece inserts, two way and three way straps, plate washers and similar small articles conforming to Grade E-165 (Fe 290) and fixed in position. 50 M&L for providing and fixing stainless steel 18 guage (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessarystainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement completeall as directed. 51 Material and labourcleaning ofsurface with wire brushes and water removing of unsolvent materials and depositing of the same as directed outside MoD land andprovide 10 mm thick screed bed/ bedding layer in CM 1:3 mixed with Water Proofing Compound (WPC) as per manufacturer instructions, including finishing the surface fair and even on RCC roof/ parapet once bedding layer of concrete is completely dried and apply oil bound bituminous primer @ 1.50 Kg/Sqm and providing 3mm thick APP modified water proofing membrane weighing not less than 3.60 Kg/Sqm reinforced with non woven polyster matt weighing not less than 160 gms/Sqm including minimum 10 cm side over laps and 15 cmend lap torch sealed and bonded as per detailed procedure as directed and finally finished the top surface with two coats of thermal resistant paint complete all as specified and as directed.Note: (i) The quoted rate is deemed to be inclusive cleaningthe entire surfacetosatisfaction ofEnginner-in-charge & removal of debris , 10 mm thick 1:3 screed & complete APP treatment. (ii) WPC will be paid seperately (iii)The work shall be carried out only through manufacturer or their authorised applicator and a written guarantee for work shall be submitted by the manufacturer for the effectiveness of WPT (iv) Care shall be taken to avoid wrinkle and air gaps while sticking membrane to the bitumen applied surface. 52 Treatment to sunken floor slab comprisingthe stage wise treatment as under : (i) Cleaning of the sunken / lowered portion of RCC slab surface (including vertical total depth plus skirting height) of floors by wire brush, chiseling out any mortar sticking to the surface and brooming / washing completely & laying40 mm average thick PCC 1.2.4 type B0 using 12.5 mm graded crushed stoneaggregate as in padding concrete to achieve proper slope including 50 mm dia 350 mm long medium grade GI pipe spouts with wire gauge on inside mouth to be fixed.(ii) After the concrete is surface is completelydried rendering thesurfaces with 10 mm thick CM 1.4 mixed with integral water proofing compound of Ultra Tech WP+ 200 or other equivalent etc complete & later after the surface is completely dried and in presence ofEngineer-in-charge fill the entire sunken portionwith water for minimum threedays tocheck dampness and seepage where dampness and sweepage noticed nozzles shall be fixed and grouting carried out without any extra costtoGovt.(iii) All junctions points of side wall where CI / GI pipes are passing through shall be seated with epoxy putty.(iv) After drying putty wash the slab and sides of sunken porting with water and make it clean and clear.(v) Applying two coat polymer modified cementious water proofing coating as per manufactures instructions to bottom and vertical sides up to finished floor level + 100 mm height.The thickness of two layer shall be 1 mm.When the second layer is still sticky, coarse sand spry shall be carried out or vertical and bottom surface of the sunken portion all as specified and directed.(vi) Plaster the bottom and sides up to bottom of the skirting with minimum 20 mm thick CM 1:4 mixed with integral water proofing compound @3% wt of cement consumed as per manufacturer’s specification including rounding of corners and junctions sloping towards spout.(WPC shall be measured & paid separately).Note :-Test the water proofed area (ponding test) by filling water for at least 72 hours and tested for leakage seepage and to the entire satisfaction of Engineer-incharge.Test shall be done in presenceof Engineer-in-chare orhis representative and record for each sunken slab shall be maintained.The treatment shall be carried out by authorized applicators of chemicals as ordered &Cost for above stage wise activity & testing is included in the rates quoted above. 53 M&L for 25 mm thick plain cement concrete 1:2:4 type B0 using 12.50mm graded crushed stone aggregate as in floor and finished the surface suitable to receivefloor tilescomplete all as directed. 54 M & L for 75 mm thick plain cement conctere 1: 3 : 6type C2 using 40 mm graded crushedstone aggregateas in sub base offlooringcomplete all as directed. 55 M & L for 75 mm thick plain cement conctere 1: 3 : 6type C2 using 40 mm graded crushedstone aggregateas in plinth protection finished the surface fairand even complete all as directed. 56 M & L non-skid coloured joint freeceramic tiles 7 to 8 mm thick (square/rectangular), area of each tile each tile exceeding 0.11 Sqm butnotexceeding 0.18Sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with tiles laid over and including 15 mm thick screed bed in cement mortar 1:6 complete all directed and specified. 57 All same as per item No 56here - in - above but each tile exceeding 0.18 Sqm butnotexceeding 0.36Sqm-do- 58 All same as per item No 57here - in - above but as in dado & skirting with10 mm thick1 : 4 cement mortar screed - do - 59 M&L glazed ceramic coloured tiles of size 350mm x 250mmx 7mm / 450mmx350mmx7mm thick, on verticals surfaces, set and jointed inneat cement slurry including 10 mm thick back coat in CM 1:4 set and jointed in neat cement slurry and pointed in white or coloured cement to matchcompleteall directed.(Note for item Nos 56 & 59 : i) Quoted rateis deemed to be inclusive of cement screed. ii) Colour of tiles shall be got appproved before incorporation in the work) 60 M&L for 18-20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite , laid over andincluding15 mm thick screed bedding in cement mortar 1 : 6 all as specified & directed.(Note: Quoted rateis deemed to be inclusive of cement screed.) 61 M&L for 18-20mm thick Sadherhali stone slab flooring, steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granit laid over andincluding15 mm thick screed bedding in cement mortar 1 : 4includingRounding to edges complete. 62 All same as per item No 61here - in - above but as in dado & skirting with10 mm thick 1 : 3 cement mortar screed - do -(Note for item No 61 & 62 : i) Quoted rateis deemed to be inclusive of cement screed.) 63 M&L for brushing neat cement slurry with 3 Kg of cement per square metre including cleaning of rusted steel particalsin reinforcement completeall as directed. 64 M&L for rendering 15 mm thick in CM 1:6 on brick or concrete surfaces or surface other than fair faces brick work, finished even and smooth without using extra cement complete all as specified. 65 All as per item No 64 here-in-above but 10mm thick in CM 1:3 on ceiling,chajja,roof projection etc -do- 66 M&L for 15mm thick rendering in two layer on surfaces other than fair face of brick work of walls consisting of 1st layer of 10mm thick plaster in CM 1:4 and 2nd layer (setting coat or top layer) of 5 mm thick plaster in CM 1:4, 2nd layer mixed with water proofing compound (ISI marked) @ 3% by weight of cement or as per manufacturer’s instructions, finished even & smooth without using extra cement, complete all as specified.Note : - Supply only water proofing compound shall be measured and paid for separately 67 M&L Preparation of Old decorated surface and applying two coat of white wash on walls etc complete and as directed. 68 M&L Preparation of Old decorated surface and applying two coat of white wash on ceiling etc complete and as directed. 69 Three coats of white wash on newly plastered surface of ceiling after necessary preparation of surfacecomplete all as directed. 70 M&L preparing new plastered wall surfaces and applying two coats of whitewashon walls etcover a coat of 3 mm thick white cement based wall care putty as ordered complete all as specified. 71 M&L preparing new plastered wall surfaces and applying two coats of oil bound distemper over a coat of alkali resistant primer over a coat of 3 mm thick white cement based wall care putty as ordered complete all as specified. 72 Complete removalofany type ofexistingtreatment from wallssurfaces and applying two coats of oil bound distemper over a coat of alkali resistant primer over a coat of 3 mm thick white cement based wall care putty as specified complete all as specified. 73 Material & Labour for applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50gm/litre and UV resisitance as per IS 15489:2004, alkali & fungal resistance dirt resistance exterior paint (Apex -Ultima Protek) of required shade (company depot tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over newsurfaces applied by mechanicalmeans i.e Airless spray including filing undulations with white cement based putty mixed with multi purpose mixer complete all as directed. 74 Complete removalofany type ofexixtingtreatment from wallssurfaces & applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50gm/litre and UV resisitance as per IS 15489:2004, alkali & fungal resistance dirt resistance exterior paint of required shade (company depot tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new or old surfaces complete all as specified. 75 M & L Two coats of 1st quality synthetic enamel paint over a coat of pink primer on new wooden surface of any description over 10 cm in width or girth including necessary preparation of new wooden surface complete all as directed. 76 Taking down old rusted / wornout 20 mm bore GI tubing after necessary disconnection & S&F new 20 mm outter diaCPVC pipes SDR 11 & Plain CPVC SDR 11 fittings fixed on walls/ceiling or laying in floors making necessary connection& testing on completion complete all as directed. 77 Taking down old rusted / wornout 25 mm bore GI tubing after necessary disconnection & S&F new 25 mm outer diaCPVC pipes SDR 11 & Plain CPVC SDR 11 fittings fixed on walls/ceiling or laying in floors making necessary connection& testing on completion complete all as directed. 78 Supply , laying , jointing 25 mm bore galvanisedsteel water tubing medium grade with fittings such as bends, tees, elbows, nipples, unions, short pieces etc laid in trenches making necessary connection and testing on completion all as specified anddirected . 79 All sameas per itemNo 78 here-in-above but laid floors / wall / underroad crossing etc -do - 80 S&F 40 mm size Gun metalglobe or gate valves(ISI Marked) conformingtoIS 778 : 1984 with iron wheelhead screwed box and both ends for iron pipeor union complete all as directed 81 S&F 25 mm size Gun metalglobe or gate valves(ISI Marked) conformingtoIS 778 : 1984 with iron wheelhead screwed box and both ends for iron pipeor union complete all as directed 82 S&F in Repair CP Bib Tap Sink Cock wall mounted with150 mm long swivel spout & wall flangeall as directedby the Engineer -in -charge.(Make :- Prayag Cat No 8316 orequivalent). 83 S&F 40 mm outer dia CPVC Pipe (ISI Marked) SDR II & plain CPVC SDR II fittings fixed on wall, celing or floors complete all as specified. 84 S&F in repairs 15mm Bib taps chromium plated fancy type cast copper alloy with crutch or butterfly handle screwed down, screwed for iron pipe or for union.Make:Prayag 8306 or equivalent 85 S&F in repairs 15mm bore fancy type pillar tap, cast copper alloy with capstan heads, chromium plated,screwed down high pressure, with or without lettered‘Hot’ or ‘Cold’ with long screwed shanks & fly nuts, screwed for iron pipes 86 S&F 15mm bore brass CP wall mixer for mixing hot and cold water screwed down with provision of over lead shower and cock for iron pipe and fixed complete all as specified. Prayag Cat No - 8475 or Equivalent 87 S&F in repairs 2 in 1 CP 15mm Bib taps Quarter turn fancy typewith crutch or butterfly handle screwed down, screwed for iron pipe or for union. Make : Cera CL 2016 or equivalent 88 S&F in Repair 15mm Bore Stop Valves / Angle Cock Fancy Type Chromium plated cast copper alloy screwed down high pressure with crutch or butterfly handles screwed both ends. 89 S&F in repairsShower rose with brass chromium plated shower rose with or without swivel joints, 100mm size including fixing to steel pipe or union. Make: Cera Cat No-F7020304 or Equivalent 90 S & F in repairs chromium plated health faucet(ABS) with 1 metre long flexible pipe suitable for 15mm bore pipe complete all as specified and directed. 91 S&F in repairs CP Soap dish 150mm, fixed to wall with chromium plated brass screws 92 S&F Towel Ring of PTMT fixed with and including Chromium plated brass screws and plastic cleats (Minimum weight 90gms). 93 S & F 110 mm bore PVC (SWR) pipes single socketed in any length with rubber rings joints fixed to wallin repars complete all as directed. 94 S & F 75 mm bore PVC (SWR) pipes single socketed in any length with rubber rings joints fixed to wallin repars complete all as directed. 95 S & F 110 mm bore, PVC (SWR) bends of any radius complete all as specified and directed. 96 S & F 75 mm bore, PVC (SWR) bends of any radius complete all as specified and directed. 97 S&F 110 mm bore PVC (SWR) junction single (single ‘T’), equal or unequal with access door 98 S&F 75 mm bore PVC (SWR) junction single (single ‘T’), equal or unequal with access door 99 S&Fin repair110mm bore PVC (SWR) branch piece, single (single ‘Y’) equal or unequal with access door. 100 S&Fin repair75mm bore PVC (SWR) branch piece, single (single ‘Y’) equal or unequal with access door. 101 S&F PVC (SWR) Vent cowl 110 mm bore size fixed complete all as directed. 102 S&F PVC (SWR) Vent cowl 75mm bore size fixed complete all as directed. 103 S&F in Repair Chromium Plated Steel Grating of 100mm size With or Without Waste Hole. 104 S&F in repairs PVC (SWR) floor trap 75 mm dia plain withsteel grating including jointing withsolventcement etccomplete all as specified 105 S&F in repairs PVC connection 450 mm long suitable for 15 mm bore GI pipe including PTMT nuts on both sides complete all as specified 106 S&F sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long fixed on wall with PVC rawl plug & cadmium plated brass screws, complete all as directed 107 S&F sink with drainage board made of stainless steel 1mm thick for kitchen with plugs, washers and wastes, including fixing with cast iron cantilever brackets, bedding in cement mortar on to dwarf wall, connecting union to pipe, overall minimum size 915mm x 460 mm with bowl size 410mm x 355mm x165 mm including 32mm dia waste pipe of polythelene of low or high density, 32mm bore chromium plated brass waste fitting with long screwed shanks and fly nuts, flange end bedded in red lead cement & other end fixed, making holes in walls for brackets and fixed in CM 1:3 or PCC 1:2:4 type B0, complete all as directed. 108 &F in repairs stainless steel Kitchen plate rack of overall minimum size 900mm x 900mm and 250mm deep, with partitions for small/large plates etc made out of stainless steel 24 Gauge, fixed with rawl plug and CP steel screws all as directed.Note : Weight of rack shall not be less than 6.00 Kg. Make PRAYAG Cat No P-348 or equivelent of Nirali/Diamond 109 S&F 550 mm X 400 mm size white flat backvitreous china wash hand basin includingPVC waste 32 mm boreCP wastecouplingchain & plug , including 32 mm dia waste pipe low density polyethlene pipe , porcelian stopper includingincluding CI bracket fixed in repair complete all as diirected. 110 S&F in repairs 600mm x 450mm looking mirror of selected quality glass not less than 5.5mm thick, mounted on 6mm thick AC building board or commercial plywood including aluminium framing and fixed to PVC rawl plugs with chromium plated brass screws and cup washers complete all as specified. 111 S & F in repairs, vitreous China wash down water closet pan (pedestal pattern), white, including connection to outgoing drain and 32mm dia flush pipe,flushing pipe, anti syphonic pipe with and including white PVC seat and cover closed pattern with flat bottom and MS chromium plated hinging device including provision of 10 ltr capacity low levelPVC Flushing cistern, complete including making good damaged/disturbed surfaces complete all as specified and directed. Make of Pan CERA Cat No S1053101/S1053102 and of cistern B1010109 or equivelent of Parryware/Hindware/Prayag 112 Dismantlingany type & capacityofwaterstoragetank hoisted in any description & S&F500 litres capacity (white colour) rotational moulded polythene water storage tank, (cylindrical verticalwith close top) triple layer colour white both inside and outside with top cover including PVC float valve high pressure suitable for 20 mm bore of pipe with polythene float,25 mm union , 25 gatevalves , fixtures hoisted and fixed in position where orderedand making necessary connection and testing complete all as directed. 113 Cutting/chipping the spalling concrete surfaces of columns, beams, facias, slabs, Chajjas & cartilevers etc., and trimming cleaning the surfaces of any thickness as ordered andapplying epoxy treatment for bonding old demolished concrete surfaces incl application of one coat of notozinc primer to the exposed reinforcement and over plastering in CM 1:4 average 20mm thick finishied even and smooth without using extra cement to level the surface etc incl necessary scafolding as required at site and where required complete all as specified and directed 114 M&L for cutting existing GI water main pipe line in position of 40 mm bore and making connection toexisting pipe line of 25mm bore with & including insertion of new GI Tee (ISI marked) of size 40mm x 40mm x 25mm including excavation & earth work in any type of soil complete all as directed. 115 S & F 5 feetlong pulley operated clothes drying system kit of 4 pipes consisting of aluminium pipes each of outer dia 22mm and inner dia 19.8mm, pulleys made up of derlin with rope guide mounted on channel pair of length 24 (distance between two pipes is adjustable). Locking system to hide rope knot. Channel to be mounted or fixed with self tapping screws provided in kit. Rope will HDPE double core of 4mm dia fixed tight tothe satisfaction ofEngineer-in-Charge . 116 E&M : Taking down carefully copper/ aluminium point wiring (light, fan, socket or power) complete, (fittings such as switches, ceiling roses, pendants, regulators, sockets etc. to be measured separately), removing taken down materials to a place where ordered for crediting includingmaking good disturbed surfaces of walls, floors, etc to match with the existing surface complete all as directed.. 117 Point wiring with PVC insulated and unsheathed FRLS cable single core multistranded copper conductor 1.5 sqmm size, 1100 volts grade cable conforming to IS-694 1990 drawn in and including PVC rigid non metalicconduit (Medium Grade) surfaceconduit on stonewall surfaces conforming to IS-9537 with all accessories including fabricated MS terminal boxes fixed flush with wall surface with 3mm thicklaminated sheet top cover fixed with brass screw for mounting switches, sockets, regulator etc including 1.5 sqmm single core PVC insulated and unsheathed copper conductor earth continuity conductor to common earth and connecting to earth dolly all as specified for :-(a) One light / Fan / bellpoint controlled by one 5 Amps switch one way 118 (b) One 3 pin socket point 5 Amp on independent board 119 (c) One 3 pin socket point 5 Amp on same board with other switches.(to be provide new point as ordered atsite) 120 (d) One light point contrlled by one 5Amps withtwo way switchs , single pole 121 All as per item No. 117 here-in-above but with 2.5sqmm ( Nominal area ) cable with 2.5 Sqmm size copper earth continuity conductor for 3 pin 15 A socket outlet on independent board complete all as specified and directed. 122 Supply and fix Switch piano, flush button single pole, 5 Amps one way. 123 Supply and fix Switch piano, flush button single pole, 5 Amps two way. 124 Supply and fix Switch sokcet combination flush type 5 Amp ,2-in-1muliti purpose 125 Supply and fix Switch socket combination flush type 5/16 Amps , 5-in-1universal multipurpose 126 Supply and fix bell push, flush button single pole, 5 Amps one way. 127 Supply and fix bell ding dong, 230 V ACsingle pole,, 5 Amps one way. 128 Ceiling rose surface bakelite 65x50mm three terminals including supply and fix PVC square blocks. 129 Supply and fix Fan regulator electronic, step & socket type 230 volt, suitable for 1200/1400mm sweep ceiling fan. 130 Taking down existinglight fittings fixed in any descriptionand S&F new 10 Watt , 6000K, 230 Volt,2ft Batten surface and wall mounted LED batten with aluminium extruded channel powder coated with diffuser for glare free light& integrated electronic driver complete with all fixing accessories such as 2 nos of PVC square/round boxes, screws, etc and connecting up with three core flexible copper conductor cable of size 24/0.20 sqmm complete fixed as per manufacturers instructions and making necessary electricalconnections and testing on completion complete all as directed. . Make : Havells/wipro/surya/ Philips 131 Taking down existinglight fittings fixed in any descriptionand S&F new 20 Watt , 6000K, 230 Volt,4ft Batten surface and wall mounted LED batten with aluminium extruded channel powder coated with diffuser for glare free light & integrated electronic driver complete with all fixing accessories such as 2 nos of PVC square/round boxes, screws, etc and connecting up with three core flexible copper conductor cable of size 24/0.20 sqmm complete fixed as per manufacturers instructions and making necessary electricalconnections and testing on completion complete all as directed. . Make : Havells/wipro/surya/ Philips 132 S&F bldg security lightfittings 1x 35 Watt Ac 230v out door typeLED street light with high pressuredie cast aluminium and heat ressistent complete with driver ,lamp bracket with impact and corrosion resistentincluding thermal managment in multiple optics complete, IP65/66 and wired with all accessories and including connection up with twine core twisted flexible copper conductor cable with 1.5 M long suitable size all as specified and directed. 133 S&F steet light bracket made out of 25 mm bore GI Light grade 1.00 M long to required shape as in bracket for steet light fittings fixed with two pair of MS flat iron clamp of size50mm X 6 mm thickness of required shape with nuts, bolts and washers suitable for steel tubular pole including painting of mild steel flate iron surface with two coates of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. 134 S&F Sheet metal enclosure (ISI marked) distribution board for 415 volts, TPN4 way Vertical type, doubledoor, triiple pole and neutral with incomingMCCB 200 Amps rated neutral copper bus bar for housing MCB and fixed flush in wall surface, and tested on completion complete all as directed.(Note: MCCB measured & paid seperately ). 135 S&F Sheet metal enclosure (ISI marked) distribution board for 240 volts, SPN8 way horizontal type, double door, single pole and neutral with 200 Amps rated neutral copper bus bar for housing MCB and fixed flush in wall surface, and tested on completion complete all as directed. 136 S & F MCCB TPN 40 to 100 Amps 415 volts, C Series 10 kA rupturing capacity providing in DB complete all as specified and directed by Engr-in-charge. 137 S & FMCB single pole 6 to 32 Amps 240 volts, C Series 10 kA rupturing capacity providing in DB completeall as specified and directed by Engr-in-charge. 138 S & FMCB single pole & neutral 40 Amps 240 volts, C Series10 kA rupturing capacity providing in DB completeall as specified. 139 Taking down old existing sub main wiring and provide new submain wiring with 2 runs of 6 Sqmm single core PVC insulated, unsheathed, multi strandedcopper conductor and one single core 6 Sqmm PVC insulated , unsheathed , multi strandedcopper cable as earthing lead as per IS : 694 / 1990 drawn through and includingnon-metallic PVC rigid conduit/casing caping of size as orderedin walls / ceilings etc with all accessories such as Tees, Elbows, junction box, reducers etc and connecting to existing main switch board / distribution board of each building / qtr as ordered and testing on completion complete all as specified and directed. (Note :- 2 runs 6 Sqmm cable , one run 6 Sqmmcableand one run of PVC Conduit /Casing caping shallbe measured as oneunit length) . 140 M&L for taking down and dismantling of ceiling fan 1200mm/1400mm sweep 230 Volt 50 C/S AC of any make or model by opening the cover, separating down rod, rotor and stator assembly, locating the fault and making the fan fully in serviceable condition with & including replacing the bearing withsimilar type of exisitng one, worn out screws of the cover, split pin, twin core flexible copper wire of size 23/0.0076, locking nuts & machine screws with spring washer for ceiling fan blades, oiling and greasing including rewinding of ceiling fan by removing of burnt winding from stator and rewinding the same with super enamelled copper winding wire of same gauge, same weight & turns including varnishing of winding etc &finally painting the ceiling fan with one coat of spray painting with white DUCO Paint & lettering & Numbering the same as per existing ,reassembling , refixingthe same in same or different location asordered & finallytesting the fan ,complete all as directed.Note : (i) Spare Parts/accessories found unserviceable includingbearings , rewinding etc which are required to makethe fan functional shall be providsed by thecontractorwithout any extra cost toGovt as quoted rate isdeemed tobe inclusive forthesame .(ii) Quoted rate isdeemed tobe inclusive ofpainting . 141 Takingdown any capacity & type ofwater geysers fixed in any description after necessary waterdisconnection & refixingthesame or different location as ordered after other B&Rrepair works are completed in all respectsincluding provn ofnew 600 mm long PVC connection pipe & pair ofPVC HOT & COLD connections , making necessarywater connection & testing on completion completeallas directed. 142 Supply, fixing ,Teting and commissioning XLPE insulated screened PVC bedded, galvanized steel strip or wire armoured, electric power cables ( heavy duty) with stranded aluminum conductor, 1100Volt grade on walls with fixing acessories of35 Sqmm 3.5 Core all as specified and directed. 143 M&L for Sand cushioning/sand coveringfor underground cable protection complete all as specified.Note: Punned thickness only will be measured and paid. 144 Supply and laying sub class B bricks of old size (standard size as per local availability) laid along alignment of cable as protection to cable in trenches complete all as specified and directed by Engineer-in-Charge 145 S&F in repair of sheet metal enclosure of size 1500 x 1000 x 300 mm grouted on wall/floor in PCCwith nuts and bolts made out of 2.0 mm thick CRCA sheet, having 05 Nos chamber for housing of 05 energy meters and SPN MCB with Peepingglass fixed PVC frame and one MCB SPN with fixing rail and suitable busbar chamber for fixing 05 Nos aluminium strips 300 Amp capacity each making holes for fixing aluminium lugs, complete internal wiring with 6 sqmm multistranded copper cable FRLSH, epoxy based bakelite sheet of suitable size for fixingof energy meters & MCBs, including indl chamber locking system & testingon completion completeall as directed. (Note: The quoted rate includes the cost of 05 nos MCB SPN 32 Amp complete). 146 Material and labour for earthing complete with galvanized steel earth plate electrode 60cmx60cmx6mm thick burried directly in ground (earth pit not less than 2.25 m deep below ground level) with top edge of plate not less than 1.5 m deep below normal ground level and connected to and including galvanized iron earth wire 6 mm dia by means of GI nuts, bolts, check nuts, washers thimbles, etc as shown in electrical plate No 3 of SSR Part-I and connection to main switch board/Test point/panel/equipment and testing on completion including excavation and earth work in any type of soil, returning filling in, and removal of surplus spoil to a distance not exc 50 metre,charcoal and salt in alternate layer 15 cm thick all around the earth plate electrode, MS funnel with wire mesh, GI pipe medium grade 20 mm bore for watering and 15 mm bore 3.00 metre long GI pipe light grade for earth wire protection fixed with poles with two clamps, made from MS flat 25 mmx3mm, bolts, nuts and washers,PCCchamber (1:3:6) type C1, 40mm thick precast RCC cover 1:2:4 type B1 shall be provided on CI frame etc complete all as specified & as directed
