Tender For Repair And Maintenance Of Bsnl Staff Quarters At Palampur Distt Kangra Hp, palampur-Himachal Pradesh

Tender For Repair And Maintenance Of Bsnl Staff Quarters At Palampur Distt Kangra Hp; 1 Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows, fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note: Butt hinges and necessary screws shall be paid separately) 2 Kiln seasoned and chemically treated hollock wood 3 35 mm thick shutters 4 Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick. 5 Ply wood 5 ply, 9 mm thick 6 Decorative plywood one side decorativeveneer and commercial veneer on other face (Type 1) conforming to IS 1328 BWR Type 7 Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete (Copper oxidised as per IS 1378) 8 250x16 mm 9 Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete (Copper oxidised as per IS 1378) 10 200x10 mm 11 Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade with necessary screws etc. complete : 12 200x10 mm 13 Providing and fixing aluminium handles ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete : 14 125 mm 15 Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete. 16 Twin rubber stopper 17 Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. 18 Using M.S. angels 40x40x6 mm for diagonal braces 19 Distempering with 1st quality acrylic distemper (ready mixed) having VOC (Volatile Organic Compound ) content less than 50 gram/ litre, of approved brand and of required shade and colour complete to give and even shade. 20 Old work (one or more coats) 21 White washing with lime to give an even shade : 22 Old work (one or more coats) . 23 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : 24 One or more coats on old work. 25 Finishing walls with water proofing cement paint of required shade : 26 Old work (one or more coats @ 2.20 kg/10 sqm) complete. 27 Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-harge. 28 With cement mortar 1:4 (1 cement : 4 fine sand). 29 Renewing glass panes, with putty and nails wherever necessary including racking out the old putty: 30 Float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm). 31 Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete. 32 10 litre capacity - White 33 Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. 34 Semi rigid pipe 35 32 mm dia 36 40 mm dia 37 Repainting sand cast iron/ centrifugally cast iron (spun) iron, soil, waste, vent pipes and fittings with one coat of synthetic enamel paint of any colour such as chocolate, grey or buff etc : 38 100 mm diameter pipe 39 75 mm diameter pipe 40 Providing and fixing brass bib cock of approved quality : 41 15 mm nominal bore 42 Repainting G.I. pipes and fittings with synthetic enamel white paint with one coat of approved quality : 43 15 mm diameter pipe. 44 20 mm diameter pipe. 45 Cleaning choked manholes, gully traps of CSC & Staff Qtrs. i/c clearing of chockedsewer line by any suitable means, i/c cleaning the site for sewage, disposal of sewage testing, spreading disinfectant (phenyle after cleaning the surrounding area complete as per the direction of Engineer in Charge.) Rate include cleaning of 10 manholes and 50 m (approx) chocked sewer line.

INR 590 /-

INR 9956.0 /-

INR 4.97 Lakhs /-