Tender For 1-Reconstruction Of District Lab Of Pwd Muzaffarnagar - Excavation in oundation in ordinary soil (loam, clay or sand) including lift upto 1.50m and lead upto 30m and including filling watering and ramming of excavated earth into the trenches or into the space between the building and the sides of foundation tenches or ino the plinth and removal and disposal of surplus earth as directed by the engineer in charge upto a disance of 30m fro the foundation trenches.(S.I. No. 251) Excuding GST 2 Treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1 :2 (1 cement: 2 Coarse sand) to match the existing floorWith Chlorpyriphos/Lindane E.C. 20% with 1% concentration As per DSR No-2.35.3.1 Excuding GST 3 1:4:8 (1 cement : 4 coarse sand (zone-iii) derived from natural sources : 8 graded stoneaggregate 40 mm nominal size derived from natural sourcesAs per DSR No-4.1.8 Excuding GST 4 1:2:4 (1 Cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stoneaggregate 20 mm nominal size derived from natural sources) As per DSR No-4.2.3 Excuding GST 5 Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). As per DSR No-5.1.2 Excuding GST 6 Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering,finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). As per DSR No-5.3 Excuding GST 7 Steel reinforcement for r.c.c. work ready to use “cut and bend” rebars of approved make from factory/workshop to construction site including placing in position and binding all complete above plinth level.thermo-mechanically treated bars of grade fe-500D or more As per DSR No-5.22C.1 Excuding GST 8 Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in:Cement mortar 1:4 (1 cement : 4 coarse sand) As per DSR No-6.1.1 Excuding GST 9 Brick work with common burnt clay machine moulded perforated bricks of class designation 12.5 conforming to IS: 2222 in superstructure above plinth level up to floor five level in cement mortar 1:6 (1 cement : 6 coarse sand) : With F.P.S.(non modular) bricks As per DSR No-6.3.1 Excuding GST 10 Providing and laying damp-proof course 40mm thick with cement concrete 1:2:4 (1 cement: 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 12.5mm nominal size derived from natural sources)necessary As per DSR No-4.10 Excuding GST 11 12 mm cement plaster of mix : 1:4 (1 cement: 4 fine sand) As per DSR No-13.1.1 Excuding GST 12 Cement plaster 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement.20 mm cement plaster As per DSR No-13.9.2 Excuding GST 13 Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth. As per DSR No-4.17/DSR Excuding GST 14 Providing and fixing pressed steel door frames conforming to IS: 4351, manufactured from commercial mild steel sheet of 1.60 mm thickness, including hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25 mm, or base ties of 1.60 mm, pressed mild steel welded or rigidly fixed together by mechanical means, including M.S. pressed butt hinges 2.5 mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-charge:Profile E Fixing with adjustable lugs with split end tail to each jamb As per DSR No-10.14.1.3 Excuding GST 15 9.5 Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows, fixing with butt hinges of required size with necessary screws, excludingpanelling which will be paid for separately, all complete as per direction of Engineer-in-charge.(Note:- Butt hinges and necessary screws shall be paid separately) Second class teak wood As per DSR No-9.5.1 Excuding GST 16 Float glass panes 4 mm thick glass pane (weight not less than 10kg/sqm). As per DSR No-9.7.7.1 Excuding GST 17 Providing and fixing aluminium tee channels (heavy duty) with rollers & stop end in pelmets as curtain rod. As per DSR No-9.104Excuding GST 18 Providing and fixing aluminium sliding door bolts lSI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete:300x16 mmAs per DSR No-9.104Excuding GST 19 Providing and fixing aluminium sliding door bolts lSI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete:250x16 mmAs per DSR No-9.96.2 Excuding GST 20 9.68 Providing and fixing oxidised M.S. casement stays (straight peg type) with necessary screwsetc. complete (Copper oxidised as per IS 1378)250 mm weighing not less than 280 grams As per DSR No-9.68.2 Excuding GST 21 Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete. As per DSR No-9.83 Excuding GST 22 Providing and fixing aluminium tower bolts lSI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary 9.97.3 Excuding GST 23 Providing and fixing bright finished brass handles with screws etc. complete:and fixing bright finished brass handles with screws etc. complete:125 mm As per DSR No-9.81.1 Excuding GST 24 Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete.150 mm As per DSR No-9.82 Excuding GST 25 Providing and fixing angle iron frames for doors, windows and ventilators of mild steel Angle sections of size 35x35x5 mm, joints mitred and welded by angle iron 35x35x5 mm or 35x 5 mm flat pieces to the existing T-iron frame or to the wall with dash fastener, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer, all complete as per the direction of Engineer-In-charge. As per DSR No-10.31 Excuding GST 26 Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). As per DSR No-10.28 Excuding GST 27 Providing and applying of plaster of paris puty of2mm thick over plastered surface i/c asper DSR 13.26 As per DSR No-9.104Excuding GST 28 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even andsmooth complete. As per DSR No-13.8 Excuding GST 29 13.85 Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content. With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre As per DSR No-13.85.3 Excuding GST 30 Wall painting Two coat with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture,including applying additional coats wherever required to achieve even shade and colour. As per DSR No-13.83.2 Excuding GST 31 Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coatapplied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/10 sqm of approvedbrand and manufacture As per DSR No-13.48.2 Excuding GST 32 Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily.Double charge vitrified tile polished finish of size Size of Tile 600 x 600 mm As per DSR No-11.41A.1.1 Excuding GST 33 Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), including filling / grouting and finishing complete as per direction of Engineer-incharge Size of Tile 600x600 mm As per DSR No-11.48.2 Excuding GST 34 Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make,in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bedof cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/sq.m including pointing the joints with white cement and matching pigments etc., complete As per DSR No-11.38Excuding GST 35 Add for plaster drip course/ groove in plastered surface or moulding to R.C.C. projections. As per DSR No-5.3 Excuding GST 36 Pdg. gola 75x75 mm in cement concrete 1:2:4including finishing with cement mortar 1:3.: In 75x75mm deep chase As per DSR No-12.21.1 Excuding GST 37 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps As per DSR No-17.7.1 Excuding GST 38 18.49 Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 :18.49.1 15 mm nominal bore As per DSR No-18.49.1 Excuding GST 39 18.18 Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plasticfloats complete :25 mm nominal bore As per DSR No18.18.3 Excuding GST 40 18.53 Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 15mm nominal bore As per DSR No-18.53.1 Excuding GST 41 Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet :150 mm diameter As per DSR No-18.22.2 Excuding GST 42 Providing and fixing kitchen sink including making all connections excluding cost of fittings.White glazed fire clay sink of size 600x450x250 mm As per DSR No-17.26.1 Excuding GST 43 Providing & fixing White vitreous china water closet squatting pan (Indian type) along with “S” or “P” trap including dismantling of old WC seat and “S” or “P” trap at site complete with all operations including all necessary materials, labour and disposal of dismantled material i/c malba, all complete as per the direction of Engineer-in charge.Orissa pattern W.C Pan of size 580x440 mm As per DSR No-14.80.2 Excuding GST 44 Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. As per DSR No-18.48 Excuding GST 45 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings, with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc. b) 15 mm dia. nominal outer dia Pipes As per DSR No-18.7.1 Excuding GST 46 Chequered terrazo tiles 22 mm thick with graded marble chips of size up to 6 mm in floors,jointed with neat cement slurry mixed with pigment to match the shade of the tiles, including rubbing and polishing complete, on 20 mm thick bed of cement mortar 1:4 (1 cement :4 coarse sand) :Light shade pigment using white cement As per DSR No-11.19.1 Excuding GST 47 Construction of Embankment on both side of the road withCarted Earth Cartage of Earth 5.00 Km with all lift and lead, transporting to site ,spreding grading to required slope and compacting as per SI No 253 & 261 (C). But Excluding GST 48 Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete.D.S.R No 11.27 Excuding GST 49 Supply & laying of 80mm thick Precast cement concerete I-Shape Interlocking paver blocks ISI markconfirming to IS: 15658-2006 with top layer of minimum 5 mm thicknesshaving plan dimension 200x(160+120mm) of O.P. Cement , smooth high gloss finish, skid resistant; manufactured from rubber moulds through vibro-compression mechanism. The compressive strength of concrete paver block shall not be less than 40Mpaand weight 4.5kg perincluding cost of material, with a blanket layer of 4.00cm. thick fine sand. includinglabour, T & Petc required for proper completion of the work as directed by Engineer-in-charge.Excuding GST 50 Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required Group C As per DSR No-1.1 Excuding GST 51 Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium.class PVC conduit alongwith 1 No 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required As per DSR No-1.5 Excuding GST 52 Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wireAs per DSR No-1.7.1 Excuding GST 53 Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required 2 X 4 sq. mm + 2 X 4 sq. mm earth wireAs per DSR No-1.7.3 Excuding GST 54 Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required 2 X 6 sq. mm + 2 X 6 sq. mm earth wire As per DSR No-1.7.4 Excuding GST 55 Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making| good the same in case of recessed conduit as required. 20 mm 25 mm 20mm As per DSR No-1.21.1Excuding GST 56 Supplying and fixing metal box of following sizes (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including painting etc as required75 mm X 75 mm X 60 mm deep As per DSR No-1.22.1 Excuding GST 57 Supplying and fixing metal box of following sizes (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including painting etc as required180 mm X 100 mm X 60 mm deep As per DSR No-1.22.5Excuding GST 58 Supplying and fixing metal box of following sizes (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including painting etc as required 200mmX125 mm X 60 mm deep As per DSR No-1.22.6 Excuding GST 59 Supplying and fixing following modular switch/socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.5/6 amps switch As per DSR No-1.24.1 Excuding GST 60 Supplying and fixing following modular switch/socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 3 pin 5/6 amps Socket As per DSR No-1.24.4 Excuding GST 61 Supplying and fixing following modular switch/socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 6 pin 15/16 A socket outlet As per DSR No-1.24.5 Excuding GST 62 Supplying and fixing following modular switch/socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. Telephone socket outlet As per DSR No-1.24.6 Excuding GST 63 Supplying and fixing following modular switch/socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. TV antenna socket outlet As per DSR No-1.24.7 Excuding GST 64 Supplying and fixing stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate As per DSR No-1.25 Excuding GST 65 Supplying and fixing following way prewired TP&N MCB distribution board of steel sheet for 415 volts on surface/ recess complete with loose wire box, terminal connectors for all incoming and outgoing circuits, duly prewired with suitable size FRLS PVC insulated copper conductor up to terminal blocks, tinned copper bus bar, neutral link, earth bar, din bar, detachable gland plate, nterconnections, powder painted including earthing etc. as required. (But without MCB/ RCCB/Isolator 8way (4+24), Double door As per DSR No-2.4.3Excuding GST 66 Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, C curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.(a) Single pole As per DSR No-2.10.1 Excuding GST 67 Supplying and fixing following rating, four pole, 415 V, isolator in theexisting MCB DB complete withconnections, testing andcommissioninQ etc. as required 40 amp As per DSR No-2.13.1 Excuding GST 68 Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3½ X 35 sq. mm (32mm)As per DSR No-9.1.21 Excuding GST 69 Supply and fixing of Fan 1200mm S I NO. 1501 (II) make Havels / Authorised Complany.Excuding GST 70 SF of LED tube light batten fitting suitable for UP to 1 X 22 watt LED Tube light complete including tube etc on surface complete in all respect SI No. 1413 A Cat AAA Excuding GST
