|
| 1 | R.C.C. M-25 Work with cement, approved coarse sand & 2 cm gauge approved stone grit inlintels of door & windows excluding supply of reinforcement and its bending, but including its fixing and binding the same with 24 B.W.G.G.I. binding wire and including necessary centering and shuttering etc. and supply of all materials, labour, Tools & plants etc. required for proper completion of the work includingcost of binding wire. but in R.C.C. in 1:1½:3(Column and T-Beam) .As Per SOR No 289 Excluding GST |
| 2 | R.C.C. Work with cement, approved coarse sand & 2 cm gauge approved stone grit in proportions of 1:1.5:3 inSlab excluding supply of reinforcement and its bending, but including its fixing and binding the same with 24 B.W.G.G.I. binding wire and including necessary centering and shuttering etc. and supply of all materials, labour, Tools & plants etc. required for proper completion of the work includingcost of binding wire. The rate excludes making of drip course which shall be paid extra.Si no 284.a but for slabs in 1:1.5:3.As Per SOR No 284A Excluding GST |
| 3 | M.S. (tor steel or plain) in Plain work such as R.C.C. or R.B. work including bending for proper shape and including supply of steel & its wastage, bend, hooks, and authorised overlapping shall be measured and including cost of binding wire.As Per SOR 504 Excluding GST |
| 4 | (B)M-150 Brick Work in in 1:4 (One cement & four Corse sand) mortarin super structure l including supply of all materials labour, Tools & plants etc. required for proper completion of the work. As Per SOR No 305A+309 Excluding GST |
| 5 | Painting on DPC or over roof slab one coat of air blown bitumen1 Kg/Sqm including cost of fuel wood other materials, labour T&P etc. required for proper completion of work. As Per SOR No 362 Excluding GST |
| 6 | 12 mm thick plaster with cement and fine sand of 1.25 fineness modules in 1:3 over brick work minimum thickness not to be less than 1cm. including supply of all materials, labour, tools & plants etc. required for proper completion of the work.. As Per SOR No 582 Excluding GST |
| 7 | Teak wood wrought framed and fixed including simple mouldings, straight work as in chaukhats including supply of all materials, labour, Tools & plants etc. required for proper completion of the work.. As Per DSR No 401 Excluding GST |
| 8 | Supply & fixing of 4.5 Cm. thick teak wood part panelled and part glazed door and window shutter including supply & fixing of wooden cleats and stops and including fixing & adjustment of hinges, bolts, locks, handles spring and or other fittings but excluding their supply and including painting with two coats of black Japan on all iron fitting if necessary. Including fixing the glass panes with putty for bradglass and glassto be 4 mm. thick. Fitting with necessary screws to be supplied by the deptt.. As Per SOR No 409 Excluding GST |
| 9 | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats,square or round bars etc. including priming coat with approved steel primer all complete.Fixed to steel windows by welding.. As Per DSR No 9.48.1Excluding GST |
| 10 | Float glass panes 4 mm thick glass pane (weight not less than 10kg/sqm).. As Per DSR No 9.7.7.1Excluding GST |
| 11 | Providing and fixing aluminium tee channels (heavy duty) with rollers & stop end in pelmets as curtain rod.. As Per DSR No 9.104Excluding GST |
| 12 | Providing and fixing aluminium sliding door bolts lSI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour oAs Per Including GSTr shade with nuts and screws etc. complete:300x16 mm. As Per DSR No 9.96.1Excluding GST |
| 13 | Providing and fixing aluminium sliding door bolts lSI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete:250x16 mm. As DSR No 9.96.2Per Excluding GST |
| 14 | Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete.. As Per DSR No 9.83Excluding GST |
| 15 | Providing and fixing aluminium tower bolts lSI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete:250x10 mm.. As Per DSR No 9.97.2 Excluding GST |
| 16 | Providing and fixing bright finished brass handles with screws etc. complete:and fixing bright finished brass handles with screws et.c. complete:125 mm.As . As Per DSR No 9.81.1Excluding GST |
| 17 | Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete.150 mm.. As Per DSR No 9.82 Excluding GST |
| 18 | Providing and fixing pressed steel door frames conforming to IS: 4351, manufactured from commercial mild steel sheet of 1.60 mm thickness, including hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25 mm, or base ties of 1.60 mm, pressed mild steel welded or rigidly fixed together by mechanical means, including M.S. pressed butt hinges 2.5 mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-charge:Profile E Fixing with adjustable lugs with split end tail to each jamb.. As PerDSR No 10.14.1.1Excluding GST |
| 19 | Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2 mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of T-iron 40x40x6 mm, with 40 mm dia steel pulleys, complete with bolts, nuts, locking arrangement, stoppers,mm, with 40 mm dia steel pulleys, complete with bolts, nuts, locking arrangement, stoppers,handles, including applying a priming coat of approved steel primer.As Per DSR No 10.3 Including GST |
| 20 | Providing and applying of plaster of paris puty.As Per Including GST of2mm thick over plastered surface i/c asper DSR 13.26. As DSR No 13.26 Per Excluding GST |
| 21 | Providing wall puttyon New surface with approvel quality material of Berger/J.K./Birla or similar make 2 coats complete work . As Per SOR Ch- 15 new item 4 Excluding GST |
| 22 | Wall painting Two coat with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture,including applying additional coats wherever required to achieve even shade and colour.. As Per DSR No 13.83.2Excluding GST |
| 23 | Painting roofs or other iron work in large areas with one coat priming and on e coat of approved (above one Sq. Metre) paint (British antesol or equivalent) including supply of all materials,labour, Tools & plants etc. required for proper completion of the work. Paint to be used ISI Marked... As Per SOR No 644+645 Excluding GST |
| 24 | Polishing in high gloss/matt finish melamine clear polish on wood work in required color/wooden shade texture with following process in the sequence as detailed below:1. The surface to be polished is rubbed with sand paper 80/120 no. and then with sand paper of 160/180 nos 2. Applying two coats of sealer with spray gun and allowing sufficient drying time for 1st coat and 2nd coat is allowed to dry for 8 to 12 hrs. 3. On drying of sealer coat, wet rubbing with emery cloth of finer grading with ample waterto remove excess sealer layer and make the surface further smooth after this wet rubbing,then surface is applied with special grade melamine fillers to fill all the small and big holes/grooves etc. Filler coat to be allowed to dry for 4 to 6 hrs on which again a light wet rubbing is done this surface is further allowed to dry for 12 hrs. 4. On this, 1st coat of melamine polish is applied with spray gun using melamine clear polish and melamine thinner in required proportion. This 1st coat is allowed to dry for 24 hrs then this dry surface is again fine wet rubbed smooth, which is further allowed to dry for 12 hrs. The final melamine polish is applied with compressor pressure spray gun using melamine clear polish and melamine thinner mixed in required proportion complete as per direction of Engineer-in-Charge. (Final coat to be done in 1 or 2 layers without gap of time.).. As Per DSR No 13.116 Excluding GST |
| 25 | Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of . As Per DSR No 12.45.1Excluding GST |
| 26 | Supply and fixing 6 to 8 mm thick ivory or light shades vitrefied tiles 600x600 mm size in flooring and skirting with 1:3approved cement andcoarse sand morter finished with in its cement colour slurry, jointing and polished of approved quality complete, including supply of all materials, labour, tools andplants etc. required for proper completion of the work. as per direction of Engineer - in- charge As . As Per SOR No CH-14 New Item Excluding GST |
| 27 | Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), including filling / grouting and finishing complete as per direction of Engineer-incharge Size of Tile 600x600 mm.. As Per DSR No 11.48.2 Excluding GST |
| 28 | Supply and fixing 6 mm. (¼\") China white glazed tiles in flooring or in skirting or dado laid with 1:3 Cement and approved coarse sand mortar finished with white cement slurry, jointing and polishing complete, including supply of all materials, labour and Tools and Plants... As Per Sor No 628 Excluding GST |
| 29 | Marking drip coarse in sun shades or facie with 1:3 cement and fine sand mortar as per direction of Engineer-in-charge including supply of all materials, labour, Tools & plants etc. required for proper completion of the work. As Per SOR No 600 Excluding GST |
| 30 | Providing and layinggola 75x75 mm in cement concrete 1:2:4including finishing with cement mortar 1:3.: In 75x75mm deep chase. As Per DSR No 12.21.1 Excluding GST |
| 31 | Providing and laying \"brick coba\" 12mm thick laid with M-150 class brick bat coba 7.50 cm thick with gap of 15mm to each other, over 20mm thick base of cement mortar 1:4 cement and coarse sand mixed with water proofing compound spreading cement slurry mixed with aerelic cement concrete water proofing compound filled gaps of coba & top of coba mortar mixed with water proofing compound in 1:4 cement and coarse sand mortar finished smooth & top mashed false square 30cm x cm and side wall parapet shall be mono tythic plaster wall upto 30 cm higher and junction and corner shall be rounded by brick ballast cement and coarse sand masonary Coba with top finished plaster mixed with acetic water proofing compound @ 2% by weight & including S/o all material, labour, T&P etc complete for proper completion of work.. As Per SOR No Ch -11 New ItemExcluding GST |
| 32 | Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4---finishing the outlet complete... As Per DSR No 12.22 Excluding GST |
| 33 | ProvidingandfixingwashbasinwithC.I.brackets,15 mmC.P.brasspillartaps,32mmC.P.brasswasteof standard pattern, including painting of fittings and brackets,cuttingandmakinggoodthewallswherever require:.White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar tap .White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar tap.. As Per SOR No 21.16 Excluding GST |
| 34 | Providing and fixing toilet paper holder standrad size ISI marked C.P. brass as per direction Engineer-in-charge.As . As Per SOR No 21.35 Excluding GST |
| 35 | Providing and fixing P.V.C. waste pipe for sink or wash basin including PVCwaste fittings complete.Semi rigid pipe 32 mm dia / 40 mm dia.. As Per SOR No 21B 21.24 Excluding GST |
| 36 | Providing and fixing C.P. brass long nose bib cock of approved quality confirming to ISI standards and weighing not less than 810 gms.) 15mm nominal bore. As Per SOR No 21B 21.08 Excluding GST |
| 37 | Providing and fixing C.P. brass bib cock of approved quality confirming to IS:8931 15 mm nominal bore. As Per SOR No 21B 21.07 Excluding GST |
| 38 | Providing and fixing ball valve (brass)ISI marked approved quality complete , High & low pressure with plastic floats complite as per direction of Engineer-in-charge. b) 20 mm nominal bore.. As Per SOR No 21B 21.06 Excluding GST |
| 39 | Providing and fixing brass stop cock ISI markedapproved quality as per direction of Engineer-in-charge. b) 20 mm nominal bore.. As Per SOR No 21.04 Excluding GST |
| 40 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality confirming to IS:8931. As PerSOR No 21.10 Excluding GST |
| 41 | Providing and fixing 8 mm dia C.P./ S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to European type W.C. of quality and make as approved by Engineer–in-charge.. As Per SOR No 21.21Excluding GST |
| 42 | Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300x300 mm size (inside) the weight of cover to be not less than 4.50kg and frame to be not less than 2.70 kg as per standard design.150x100 mm size p type with common burnt clay (non modular) bricks of class-150.. As Per SOR No 21.31 Excluding GST |
| 43 | Providing and fixing vitreous china dual purpose closet suitable for use as squatting pan or European type water closet (Anglo Indian W.C. pan) with seat & lid fixed with C.P. brass hinges and rubber buffers, 10 litre low level flushing cistern with fitting and brackets, 40 mm flush bend, 20 mm over flow pipe, with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required... As Per SOR No 21b.29 Excluding GST |
| 44 | Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 30x260x350 mmand 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete,including painting of fittings and brackets, cutting andmaking good the walls and floors wherever required :One urinal basin with 5 litre white P.V.C. automatic flushing cistern As Per SOR No 21B 21.14 Including GST |
| 45 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank lSI: 12701 marked(Sintex or equivalent) with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank complete as per direction of Engineer-in-charge.. As Per SOR No 21B 21.11 Excluding GST |
| 46 | Supply and fixing of 10.0 cm. PVC down pipe.(kissan/suprime make) make complete with bends with door at top and plain at bottom and grantings and including supply of necessary M.S. clamp 2.5cm x 3 mm. (1\" x1/8\") fixed to walls with cement motar (1:2)and including supply of 15 cm (6\") long 6mm. (1/4\") dia nail all materials, labour and T& P. etc. required for proper completion of the work and also including repair of plaster pointing etc. if damaged during fixing of the pipes.As Per SOR No 730A Including GST |
| 47 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings. This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineerin-Charge. External work.i) 100 mm dia. nominal outer dia Pipes. As Per SOR No 21.03 Excluding GST |
| 48 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. Bend 87.5° 110 mm bend.. As Per DSR No 12.42.5.2 Excluding GST |
| 49 | Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete.110 mm. As Per DSR No 12.43.2 Excluding GST |
| 50 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings, with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc..a) 15 mm dia. nominal outer dia Pipes.. As Per SOR No 21.02 Excluding GST |
| 51 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings, with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc. b) 20 mm dia. nominal outer dia Pipes.. As Per SOR No 21.02 Excluding GST |
| 52 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings, with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc. c) 25 mm dia. nominal outer dia Pipes. As Per SOR No 21.02 Excluding GST |
| 53 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. As Per SOR No 21B21.25 Excluding GST |
| 54 | Providing and fixing circular/ Hexagonal cast iron or M.S. sheet box for ceiling fan clamp, of internal dia 140 mm, 73 mm height, top lid of 1.5 mm thick M.S. sheet with its top surface hacked for proper bonding, top lid shall be screwed into the cast iron/ M.S. sheet box by means of 3.3 mm dia round headed screws, one lock at the corners. Clamp shall be made of 12 mm dia M.S. bar bent to shape as per standard drawing. As Per DSR No 10.18 Excluding GST |
| 55 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required Group C. As Per DSR No 1.1 Excluding GSTDSR |
| 56 | Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium.class PVC conduit alongwith 1 No 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required. As Per DSR No 1.5 Excluding GST |
| 57 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire . As Per DSR No 1.7.1 Excluding GST |
| 58 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire. As Per DSR No 1.7.2Excluding GST |
| 59 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.2 X 4 sq. mm + 2 X 4 sq. mm earth wire . As Per DSR No 1.7.3Excluding GST |
| 60 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.2 X 6 sq. mm + 2 X 6 sq. mm earth wire. As Per DSR No 1.7.4 Excluding GST |
| 61 | wire Supplying and drawing following pair 0.5 mm dia FRLS PVC insulated annealed copper conductor, unarmored telephone cable in the existing surface/ recessed steel/ PVC conduit as required.2 Pair.As Per DSR No 1.18.2 Excluding GST |
| 62 | Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper conductor PE insulated, shielded with fine tinned copper braid and protected with PVC sheath in the existing surface/ recessed steel/ PVC conduit as required. . As Per DSR No 1.19 Excluding GST |
| 63 | Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making| good the same in case of recessed conduit as required. 20 mm. As Per DSR No 1.21.1 Excluding GST |
| 64 | Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making| good the same in case of recessed conduit as required. 25 mm . As Per DSR No 1.21.2 Excluding GST |
| 65 | Supplying and fixing metal box of following sizes (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including painting etc as required.75 mm X 75 mm X 60 mm deep. As Per DSR No 1.22.1 Excluding GST |
| 66 | Supplying and fixing metal box of following sizes (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including painting etc as required.180 mm X 100 mm X 60 mm deep. As Per DSR No 1.22.5 Excluding GST |
| 67 | Supplying and fixing metal box of following sizes (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including painting etc as required.200mmX125 mm X 60 mm deep. As Per DSR No 1.22.6 Excluding GST |
| 68 | Supplying and fixing following modular switch/socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.5/6 amps switch. As Per DSR No 1.24.1Excluding GST |
| 69 | Supplying and fixing following modular switch/socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.3 pin 5/6 amps Socket. As Per DSR No 1.24.4Excluding GST |
| 70 | Supplying and fixing following modular switch/socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.15/16 A switch. As Per DSR No 1.24.3 Excluding GST |
| 71 | Supplying and fixing following modular switch/socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.6 pin 15/16 A socket outlet. As Per DSR No 1.24.5 Excluding GST |
| 72 | Supplying and fixing following modular switch/socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.Telephone socket outlet. As Per DSR No 1.24.6 Excluding GST |
| 73 | Supplying and fixing following modular switch/socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.TV antenna socket outlet. As Per DSR No 1.24.7 Excluding GST |
| 74 | Supplying and fixing stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate DSR No 1.25. Excluding G.S.T. |
| 75 | Supplying and flxing modular blanking plate on the existing modular plate & switch box excluding modular plate as required. As PerDSR No 1.26 Excluding GST |
| 76 | Supplying and fixing following size/ modules, Gl alongwith modular base & cover plate for modular switches in recess etc. as required.1 or 2 Module (75mm x 75mm). As Per DSR NO 1.27.1Excluding GST |
| 77 | Supplying and fixing following way prewired TP&N MCB distribution board of steel sheet for 415 volts on surface/ recess complete with loose wire box, terminal connectors for all incoming and outgoing circuits, duly prewired with suitable size FRLS PVC insulated copper conductor up to terminal blocks, tinned copper bus bar, neutral link, earth bar, din bar, detachable gland plate, nterconnections, powder painted including earthing etc. as required. (But without MCB/ RCCB/Isolator.8way (4+24), Double door. As Per DSR No 2.4.3 Excluding GST |
| 78 | Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, \"C\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.(a) Single pole . As Per DSR No 2.10.1 Excluding GST |
| 79 | Supplying and fixing following rating, four pole, 415 V, isolator in theexisting MCB DB complete withconnections, testing andcommissioninQ etc. as required 40 amp. As PerDSR No 2.13.1 Excluding GST |
| 80 | Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3½ X 35 sq. mm (32mm) . As Per DSR No 9.1.21Excluding GST |
| 81 | Supply and fixing of recess/ Surface/ Pendent mounting round 10 to 15 Watt LED Down Lighter having Powder coated die cast aluminium housing with heat sink, diffuser/ Reflector and driver set complete in all respect.CAT-AAA. Excluding GST |
| 82 | Supply and fixing of 36 Watt to 46 Watt indoor Recess mounting LED Square Fitting for Armstrong Ceiling having Powder coated die cast aluminium housing body with extended heat sink and diffuser of Special Polycarbonate meterial and driver set complete in all respect. CAT-AAA. Excluding GST |
| 83 | Supply and fixing of Fan 1200mm S I NO. 1501 (II) make Havels / Authorised Complany. Excluding GST |
| 84 | SF of LED tube light batten fitting suitable for UP to 1 X 22 watt LED Tube light complete including tube etc on surface complete in all respect SI No. 1413 A Cat AAA. Excluding GST |
