Tender For Construction work of Authority Office in Plot No. 72A of MDA Colony in Gajraula. - Excavation in foundation in ordinary soil (Loam, clay or sand) including lift upto 1.50 M, and lead upto 30 M and including filling watering and ramming of excavated earth into the trenches or into the space between the building and the sides of foundation trenches or into the plinth and removal and disposal of surplus earth as directed by the Engineer-in charge upto a distance of 30 M from the foundaiton trenches. (Where machine can not reach/move). For Building work onlv.(SOR 251)/2022 2 Earth Work in cutting or in embankment in ordinary soil , excavation tobe in the form of regular pits not exceeding 1/2 meter(20) depth andearth work in embankment to be in 2 cm. (8) layers including rammingand dressing the surface to requred levels and slopes and also including1.50 M(5ft.)lifts and 30 M (100ft.) lead. The earth from cutting to be usedin 30M(100ft.) distance as directed by the engineer in charge cartage 8km distance.(AR) CB NO. 2825/224 3 Providing and laying in cement concrete 1:4:8 (1 cement : 4 coarse sand :8 graded Stone aggregate 40 mm nominal size) and curing complete,including cost of form- work, in foundation and floors. SOR 2022/ S.I. No.281 4 R.C.C. work with cement approved coarse sand & 2cms(3/4) gauge approved crushed stone grit in proportion of 1:1.5:3 in footing & raft excluding supply of reinforcement and its bending but including its fixing & binding the same with 24BWGGI Binding wire & including necessary centering & shuttering etc. required for proper completion of work. Binding wire is to be supplied by the contractor free of cost. ( S.I NO. 287 SI. 283A-283/22 5 M-150 brick work in 1:4(one part of cement and four part of coarse sand of 2.2.M ) cement mortar in foundation and plinth including supply of all material, labour, T&P etc. required for proper completion of work. ( S.I NO. 307A CH-6)/20222 6 R.C.C. work with cement approved coarse sand & 2cms(3/4) gauge stone grit in proportion of 1:1.5:3 in coloumns excluding supply of reinforcement and its bending but including its fixing & binding the same with 24BWGGI Binding wire & including necessary centering & shuttering etc. & and also including supply of all material labour T&P etc. required for proper completion of work. Binding wire is to be supplied by the contractor free of cost. ( S.I NO. 289 CH-5)/2022 7 Reinforced cement concrete work in lighter beam including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size). R.C.C. work in Beam S.I.No. 285/SOR 2022 8 2cm thick 1:2:4 plain cement concrete floor with cement approved coarse sand and 2cm Graded approved stone grit laid in panels finished with 3mm floating coat of neat cement or cement and marble dust in ratio of 5:1 as specified over and including 8cm thick base concrete consisting of cement fine sand of 1.25 fineness modulus and brick ballast 4cm gauge in the proportion of 1:4:8 and removing any over lapping mortar and the joints of the panels if any and giving then uniform finishing including supply of all materials, labour and T&P etc. required for proper completion of the work. SI No-279A/2022 9 RCC work with cement approved coarse sand and 2cm (3/4)gauge approved stone ballast in the proportion 1:1½:3in slabsincluding necessary centering & shuttering excluding supply of reinforcement and its bending the same with 24 BWG GI binding wire and necessary centering & shuttering excluding supply of reinforcement and complete. ( S.I NO. 284(a) CH-5)/2022 10 P/F Mild steel or iron in plain work such as reinforced concrete or reinforced, brick work (when not included in over all rates ) wrought to required shape as necessary including bending for proper completion of the work and including supply of steel its wastage bend hooks and authorised over lapping shall be measured upto floor two level. SOR 2022/ S.I. No.504 11 M-150 brick work in 1:4(one part of cement and four part of coarse sand of 2.2.M ) Brick work in super-structure above plinth level up to floor two level (up to two storeys) includingnecessary cutting and moulding of bricks as requiredand also including honey comb brick work thickness of wall one brick thick. (1:6 cement & coarse sand) ( S.I NO. 307A+309+310) 2022 12 12mm. Thick plaster with one part of cement and four part (1:4) of approved coarse sand including supply of all materials labour and completion of work.Including making of groove in plaster surface. S.I No. 584/2022 13 Mild steel or iron work in heavy sizes such as trusses; built up gates, door, frames, record racks, roof work, gates etc. wrought to required form including drilling holes, rivetting or welding where necessary, and also including supply of steel, bolts and nuts. (PWD S.I No. 503)/ 2022 14 Supply and fixing MANN on Mahaveer or other approved(ISI marked) Z Section single/ double leaf openable shutters steel window with required shesh bass including supply and fixing of approve! heavy quality M.S. Hinges hendls 30cm long stay and hols fasts etc. complate wrought to required form including drilling hols, required welding where necessary and also including supply of steel fitting bolts nuts waslage and lasom etc and then fixing required for proper complation of wove as per direction of engineer in charge including all matrial, labour T&P machinary royalty and all taxes etc complete as per direction of engineer in charge. Sor New Item Chap.10/2022 15 Supply and fixing of 3.8 to 4.7 mm thick glass panes of ISI approved quality with equal or equivalentISI marks .brads and putty and springs for window and ventilator m.s section of wherever is required on other places including cartage of all items (PWD New Item 2(b)Ch-19)/2022 16 Providing and laying vitrified floor tiles (BELL/ KAJARIA/ SOMANI or other standard make) in different sizes (thickness to be specified by the manufacturer) with water absorptions less than 0.08% and conforming to IS :15622 of approved make in all colours and shades, laid on 20 mm thick cement mortar 1:4( 1 cement: 4 coarse sand) includinggrouting the joints with white cement and matching pigments etc, complete. PWD SOR New Item No-04/2022 17 Supply and fixing of 6 mm thick china glaxed tiles of first quality in skirtion or dado laid with 1:3 cement and approved coarse sand mortar finished with white cement slurry jointion and polishing complete including supply of all materials, labour and %&P etc. required for proper comletion of the work. SOR N0 628/2022 18 Providing wall putty on New surface with approved quality material of Berger/J.K./Birla or similar make 2 coates. S.I. new No. 12(CH.15/2022) 19 Finishing walls with Acrylic Smooth exterior paint of required shade :13.46.1 New work (Two or more coat applied @ 1.67 ltr/10 sqmover and including priming coat of exterior primer applied @ 0.90 ltr/10 sqm) DSR 13.46.1/2023 20 Painting two coat over priming coat (including cost of priming coat) on wood surface with superior synthetic enamel paint of standared make brushing to give an even shade and finished and including cleaning the surface all dirt dust and other foreign matter sand paparing and stripping including cost matter and scoured with wire brushes fine steel/ wood scrappers sand papering and knotting including coat of all and supply of all materials, labour and T&P etc. required for proper completion of the work. New Item No- 1(b)+2+4(iii)/2022 21 Providing and fixing fals ceiling on aluminium frame with POP or including supply of all materials labour T&P etc. complete BOND NO. 2636/2020 22 Providing an laying brick coba 12mm thick laid with M- 150 class brick bat coba 7.50 cm thick with gap of 15mm to each other, over 20mm thick base of cement mortar 1:4 cement and coarse sand mixed with water proofing compound spreading cement slurry mixed with aerelic cement concrete water proofing compound filled gaps of coba & top of coba mortar mixed with water proofing compound in 1:4 cement and coarse sand mortar finished smooth & top mashed false square 30cm x cm and side wall parapet shall be mono tythic plaster wall upto 30 cm higher and junction and corner shall be rounded by brick ballast cement and coarse sand masonary Coba with top finished plaster mixed with acetic water proofing compound @2% by weight & including S/o all material, labour, T&P etc complete for proper comletion of work (S.I. No. 3 NEW ITEMS)/2022 23 Supply and fixing of 32mm thick flush door commercial quality conforming to I.S. 2022 Part I (1983) including fixing of wooden clears and stoppers and including fixing and adjustment of hinges bolts locks handles springs fitting with necessary screws to be supplied.SI No-470/2022 24 Granite of colour black, cherry/ruby red 18 mm thick (slab area above 0.50 sqm) DSR 8.2.2.1/2021Granite of colour black, cherry/ruby red 18 mm thick (slab area above 0.50 sqm) DSR 8.2.2.1/2021Granite of colour black, cherry/ruby red 18 mm thick (slab area above 0.50 sqm) DSR 8.2.2.1/2023 25 Laying of 25mm thick KOTA stone of size 45X45cm and above flooring over previously prepared base with 2cm thick 1:3 cement and sand mortar including filling of joints with cement mixed with pigment required for matching the shade of floor as per the direction of Engineer-in-Charge including cutting polishing with wax polish including supply of all materials, labour and T&P etc. required for I proper completion of the work. (S.I. No. 2 NEW ITEMS) ch-14/2022 26 Part-B Electrical itemsS/L OF PVC CONDUIT COMPLETE WITH BEND 25MM DIA.SOR NO. 149A/2018 27 Wiring point for light with 1.50 Sqmtr F.R PVC insulated multi strand copper conductor cable in PVC conduit pipe partly concealed in the wall complete with 8 SWG GI earth continuity wire,piano type switch &ceiling rose/angle/batten holder on 3 mm. thick phenolic laminated backelite sheet etc.complete in all respect,as directed.including matching colour wash (E/M SI N0-131(c)) 2018 28 Wiring point for fan/fresh air fan/light duly exhaust fan with 1.50 Sqmm FR PVC insulated multi strand single core copper conductor cable in PVC conduct pipe .partly concealed in the wall complete with 8 SWG GI earth continuity wire,piano type switch & ceiling rose on 3 mm. thick phenolic laminated backelite sheet etc.complete in all respect,as directed.including matching colour wash (E/M SI N0-133(c))/2018 29 Wiring point for call bell with 1.5 Sq mm FR PVC insulated multstrand copper conducter cable as earthwire drawn inside the conduit in PVC conduit concealed in wall with 14 SWG copper with earth connectvity wire and piano type bell push or 2 socket etc, complete all respect including maching colour wash. SOR 135(C)/2018 30 Wiring point for Plug with 1.50 Sqmm FR PVC insulated multi strand copper conductor cable in PVC conduct pipe concealed in the wall complete with8 SWG GI earth continuity wire,piano type switch & socket on 3 mm. thick phenolic laminated backelite sheet etc.complete in all respect,as directed.including matching colour wash. (E/M SI N0-134(c))/2018 31 Supply and fixing power plug with 15A/250 volt flush type swich and 5Pin 15A/250 volt flush type universal scoket in suitable MS Box of 175mm x100mmx50mm size with phenolic laminated backlight sheet cover 3mm thick fixed with brass machine screw and cup washer. SOR 1139/2018 32 S/Wiring of submain with two number 2.5 sqmm FR but in 20 mm dia heavy duty same as SI 261 (B) PVC insulated multistand copper conductor cablepartly concealed in wall and partly laid in slab along with the reinforcement before concreting complete with 8 SWG GI earth continuity wire including matching colour wash ect complete in all respect. (E/M SI N0-261 C)/2018 33 S/Wiring of submain with two number 4 sqmm FR PVC insulated 1100 volts grade multistand single core copper conductor cablein 20 mm dia heavy dutyPVC conduit partly concealed in wall and partly laid in slab along with the reinforcement before concreting complete with 8 SWG GI earth continuity wire including matching colour wash ect complete in all respect. (E/M SI N0-262C)/2018 34 S&F of 6 Amp to 32 Amp M.C.B.(10K) SOR No 1002/2018 35 S&F of 40 Amp S.P. IsolaterCat B,SOR NoE/M SI N0- 1004 (A)2018 36 Supply and burying of 40mm dia x 4.5 metres long G.I.Pipe vertically for earthing having 12mm dia. Holesspaced 75mm apart drilled up to 2 metre from the bottom complete with earthing lead of No. 6 to 8SWG GI wire in G.I. Pipe up to appron (and from appron to switch board the cost of G.I. wire and pipe will be extra)upto switch board, 30cm square C.I. box with hinged cover masonary enclosure, funnel at top, alternate layers of charcoal/coke and salt at least 150mm thick alround etc. as per directions of Engineer-in-charge complete in all respects as per drawing. ELEC. SOR 2018 ITEM NO.701/2018 37 supply and istalations of daikin 2.00 ton 3 star fixed speed split AC, model no. ftl 50 u cost ( 100% copper ) pm 2.5 air purifine filter all complete.(CB. No.2792/2023) 38 Supply & fixing of LEDstrip light complete as per design, drawing, specification & as aapproved by Engineer incharge C.B .NO.2792/2023 39 Supply & fixing of LEDstrip light driver complete as per design, drawing, specification & as aapproved by Engineer incharge C.B .NO.2792/2023 40 Part-C SaintaryProviding & fixing CPVC pipes having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in charge. concealed work inc cutting chases and making good the walls etc with 20 mm nominal outer dia pipes as per DSR 2021 item No 18.8.2/2023 41 Providing & fixing CPVC pipes having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in charge. concealed work inc cutting chases and making good the walls etc with 25 mm nominal outer dia pipes as per DSR NO.-18.8.3/2023 42 Providing and fixing white vetreous china pedestal type water closet (European type) with seal and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete including painting of fittings and brackets, cutting and making good thewalls and floors wherever required. W.C. pan with ISi marked white solid plastic seat and lid. SOR 17.3.1/2023 43 Providing and fixing white vitreous china wash basin including making all connections but excludinq the cost of fittinqs : Flat back wash basin of size 630x450mm SI.No.(17.25.1) 2023 44 Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required 510x1040 mm bowl depth 250 mm DSR No.17.10.1.1/2023 45 Providing and fixing ball valve (brass) of approved quality complete. 15 mm dia. nominal bore. SI.No.(18.18) 2022 46 supply of instalation of 50lpm R.O of auqadart make allcomplete MR.BOND NO. 2792/2023 47 Providing and placing on terrace (at all floor levels} polyethylene water storage tank ISi: 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. SI.No.(18.48) 2023 48 Providing and fixing 110 mm dia P.V.C pipe heavy quality 6kg/sqcmworking pressure including supply of all specials clamps with wall cutting etc and other material labour T&P ctc. required for proper completion of the work.As per item No. 730 above but with PVC pipe, 6kg/per sq.cm. pressure 110cm dia.SI.NO-730(A)/2022 49 Supply and Fixing Steel jali 100mm round (P.S.R) PMAY 50 Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) 25 mm nominal boreDSR 18.17.1/2023 51 Construction of brick masonary inspection chambers 0.45 m x 0.6m x 0.45m as per standard designwith base concrete 1:6:12, 23 cm thick brick wall in 1:6 cement and coarse sand, plastering 1:4 cement and coarse sand with neat finish including RCC cover 8 cm thick including supply of all materials, labour T&P ctc. required for proper completion of the work. DSR-19.30.1/2023 52 Providing and fixing C.P. brass angle valve(Kingston, Glacier, Corbat, Allent, Hindware) for basin mixer and geyser points of approved quality conforming to IS:8931 a) 15 mm nominal bore 15mm nominal bore SOR.NO 18.53.1/2023 53 Providing and fixing C.P. brass long body bib cock (Kingston, Glacier, Corbat, Allent, Hindware) of approved quality conforming to IS standards and weighing not less than 690 gms 15 mm nominal bore /SOR (18.51.1/2023 54 S/F 100 mm dia Nahani trap India make of approved heavy quality complete with CP brass gratings Nahani trap laid over base ceoment concrete 1:6:12ISI marked including supply of all materials, labour T&P ctc. Required for proper completion of the work. (P.S.R) 55 Supply and laying 160mm internal dia P.V.C.Finolex or Jindal make pipe of 10kg/sqcm pressure with all fitting as socket, bend, Tee, Cross etc. complete and including supply of all materials, labour and T&P etc. required for proper completion of the work.(PSR)2723/mda/ee/2022
