Tender For Construction Of Various Works At Govt. College Mangrol Under Rusa 2.0 - Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth upto 30 cm measured at a height of 1m above ground level and removal of rubbish upto a distance of 50 m outside the periphery of the area cleared. Earth work in excavation by mechanical means (Hydraulic Excavator )/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m. including taking out the excavated soil and depositing and refilling of jhiri with watering & ramming and disposal of surplus excavated soil as directed with in a lead of 50 meter. All kinds of soils Supplying and Filling in plinth with river sand under floors including watering ramming consolidating and dressing complete including cost of sand Random Rubble Dry Stone Kharanja under floor Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level. M10 grade Nominal Mix 1:3:6 (1 cement: 3 coarse sand: 6 graded stone aggregate 20mm nominal size). Random rubble stone masonary for foundation and plinth in cement sand mortar above 30 cm thick wall in Cement Mortar 1:6 ( 1 Cement: 6 Sand) Providing and laying in position specified grade of cement concrete for all RCC structural elements upto plinth level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers( if required) excluding the cost of contering, shuttering and reinforcement. M20 grade Nominal Mix / Design Mix Contering and Shuttering with plywood or steel sheets including strutting, propping bracing both ways and removal of formwork for foundation, footings, strop beam, raft, bases of columns etc. Brick work with F.P.S. bricks of class designation 75 in superstructure above plinth level upto floor V level in all shapes and sizes in: Cement mortar 1: 4 (1 cement: 4 coarse sand) Half brick masonry in Superstructure, above plinth level upto floor V level using bricks of designation 75 Cement mortar 1: 4 (1 cement: 4 coarse sand) Add extra providing and placing in position 2 Nos., 6mm M.S. bar at every third course of half brick masonry. Providing and laying in position specified grade of cement concrete for RCC structural elements upto floor five level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1) cement: 3 coarse sand) and making good the joints and cost of plastizers if required) excluding the cost of centering, shuttering and reinforcement for Beams, suspended floors, roofs, griders having slopes up to 15, landings, balconies, shelves, chajjas, lintels, bands, plain windows sills, staircases and spiral staircases etc. M25 grade Nominal Mix / Design Mix Providing and laying in position specified grade of cement concrete for RCC structural elements upto floor five level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1) cement: 3 coarse sand) and making good the joints and cost of plastizers (if required) excluding the cost of contering, shuttering and reinforcement for Walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. M25 grade Nominal Mix / Design Mix Centering & chuttering with plywood or steel sheets including strutting, propping bracing both ways with steel props and removal of formwork for upto floor five level for Suspended floors, roofs, landings, staircases, balconies, girders, cantilevers, bands, coping bed plates, anchor blocks, sillo, chhajjas, lintel, beam, Centering & chuttering with plywood or steel sheets including strutting, propping bracing both ways with steel props and removal of formwork for upto floor five level for: Columns, pillars, posts and struts etc. Providing and fabricating reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding (including cost of binding wire) all complete. up to floor five level. (Original producers who manufacture billet directly from iron ores and roll the bilets to produce steel conforming to IS:1786), Thermo-mechanically Treated bars Kota stone slab flooring 25 mm thick over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with base of cement mortar 1:4 (1 cement) 4 coarse cand), For area of cach slab from 2001 to 5000 Sq.Cm. Kota stone slab flooring 25 mm thick over 20 mm (average) thick base laid over and jointed with grey cement clurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with base of cement mortar 1:4 (1 cement : 4 coarse sand) for area of each slab upto 300 to 2000 Sq.Cm.: 25mm thick slab. Supplying and fixing in walls machine cut and polished stone shelves, tands and in CM 1:3 with machine cut edges: Kota stone minimum 30mm thick. Providing and fixing Granite stone slab mirror polished and machine edge cut in walls, pillars, stops, Shelves, Silla Counters, Floors etc. laid on 12mm (Av.) thick base of cement mortar 1:3 (1.cement: 3 coarse cand) jointing with white coment mortar 1:2 (1white cement: 2 marble dust) with pigment to match the shade of the marble slab including grinding, rubbing and polishing complete. South Zed Black. Above 3601 Cm2 Slabs. Providing and fixing 1st quality MAT finished ceremic tile size 300x300mm confirming to IS 13755 and IS: 15622 colour such as white, grey, ivory, fume red brown, light green, light blue and other light shades in floors, steps, pillars etc. laid on a bed of neat cement slurry finished with fluch pointing in the white cement mixed with pigment to match the shade of the tile complete (including the cost of cement mortar bed 1:4). Providing and fixing 1st quality standard white, grey, ivory, fume red brown, light green, light blue and other light shades glazed tiles confirming to IS: 13753 & IS :15622 of size 200mm x 300mm in walls, floors, steps, pillars etc. laid on a bed of neat cement slurry finished with fluch pointing in the white cement mixed with pigment to match the shade of the tile complete (excluding the cost of cement plaster on walls and pillar). Extra for using size above 200x300mm in glazed tiles and for using 400mm x 400mm MAT finished tiles in place of 300mm x 300mm size. Providing & fixing precast cement concrete coping 1:2:4 mix 50mm thick complete as per specification: 6 mm thick cement plaster to ceiling of mix 1:3 (1cement: 3-fine sand). Plaster on new surface on walls in cement sand mortar 1:4 including racking of joints etc. complete fine finish: 20mm thick. 12mm thick. Providing and applying white cement based putty over plastered surface to prepare the surface even and smooth complete, New Plastered Surface (three or more coats). Providing and fixing external grade board solid core single leaf flush door shutters ISI 2202-67 marked using Phenol formal dehyderesin in glue both sides with approved steel fittings complete as per annexure A: 35 mm thick Commercial Veneer both side etc.
