Tender For P.D. Dgovt. Model Inter College Imliya,Government High School , Riwan,Kunheta And Ggic Maudaha Dist. Hamirpur - Boring, providing and installing cast in situ single under reamed piles of specified diameter and length below pile cap in M-25 cement concrete, to carry a safe working load not less than specified, excluding the cost of steel reinforcement but including the cost of boring with bentonite solution and the length of the pile to be embedded in pile cap etc. all complete. (Length of pile for payment shall be measured upto to the bottom of pile cap) 250 mm dia piles Analysis (DSR-20.3.1) 2 Excavation in foundation in ordinary soil (loam clay or sand) including lift upto 1.50 meter and lead upto 30 meter and including filling, watering and ramming of excavated earth into the trenches or into the space between the building and sides of foundation trenches or into the plinth and removal and disposal of sur-plus earth as directed by the Engineer incharge up to a distance of 30 meters from the foundation trenches.PWD-251 3 Supplying and filling in plinth withsand under floors, including watering, ramming, consolidating and dressing complete. 4 Providing and laying in position cement concrete of specified grade excluding the cost ofcentering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) ,including cost of form- work,in foundation and floors. 5 Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources).in R.C.C.Raft foundation and footing excludingsupply of reinforcement and its fixing and bending but including its fixing and bindingthe same necessarywith 24 BWG bindingwireand including necessary etc.and also including supply of all materials,labour andtools and plants etc, required forproper completion of the works but inR.C.C.Raft foundation and footingwithapproved stone ballast.(Using1:1.5:3Mix concrete) DSR-5.1.2 6 Centering and shuttering including strutting, propping etc. and removal of form for all heights :Foundations, footings, bases of columns, etc. for mass concrete.DSR -5.9.1 7 Providing , Housting & fixing above plinth up to five floor precasted reinforcement concrete in moulding as in cornics, window sill etc , including fixing in cement mortar1:3 ( 1 cement :3 coarse sand ) cost of required centering shuttering but excuding the cost of reinforment with 1:1.5;3 ( 1 cement ,1.5 coarse sand excuding manufactured sand dirived by natural source. DSR-5.8A 8 Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more. in plain work such as reinforced concrete or reinforced, brick work(whennot includedin anover all rates )wroughttorequired shapeas necessary including bending for proper completion of thework andincluding supply of steel itswastage bendhooks andauthorisedover lappingshallbe measured upto floor two level.DSR-5.22.6 9 Finishingwallswith water-proofing on cementpaint of approvedmakesuch as super snowcem, durrocem, robiacem, guttucem supercem qualityandof required shade on undecorated wall surfaces(two coat) overone andincludingonecoatwhite cementprimertogiveaneven shade after thoroughly brushing the surface to powdered materialsincluding curing and cost of all materials. DSR 13.44.1 10 Supply of M.S. Grill of a approved quality and dwaring made of flats iron not bigger then 20x4 mm or required size including sincluding supply of all materials, fabrication labour T & P and also one coat of red oxide paint complete in all respect as all respect as per direction of Engineer in charge for proper completion of the work. DSR-10.25.2 11 Providing and fixing concertina coil fencing with punched tape concertina coil 600 mm dia 10 metre openable length ( total length 90 m), having 50 nos rounds per 6 metre length, upto 3 m height of wall with existing angle iron Y shaped placed 2.4m or 3.00 m apart and with 9 horizontal R.B.T. reinforced barbed wire, stud tied with G.I. staples and G.I. clips to retain horizontal, including necessary bolts or G.I. barbed wire tied to angle iron, all complete as per direction of Engineer-in-charge, with reinforced barbed tape(R.B.T.) / Spring core (2.5mm thick) wire of high tensile strength of 165 kg/ sq.mm with tape (0.52 mm thick) and weight 43.478 gm/ metre (cost of M.S. angle, C.C. blocks shall be paid separately) DSR-16.53
