Tender For Various Repair And Maintenance Work At Acjm Court Railmagra , Rajsamand - Repairs To Plaster Of Thickness 12Mm To 20Mm In Patches Of Area 2.5 Sq. Metres And Under Including Cutting The Patch In Proper Shape, Raking Out Joints And Preparing And , nathdwara-Rajasthan

Tender For Various Repair And Maintenance Work At Acjm Court Railmagra , Rajsamand - Repairs to plaster of thickness 12mm to 20mm in patches of area 2.5 sq. metres and under including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50 m lead With cement mortar 1 :4 ( 1 cement : 4 coarse sand) 2 Painting exterior surface of Wall with 100% acrylic exteriorpaint of approved brand and manufacture to give an evenshade with two or more coats including prepartion of basewith sand papering, primer, putty, etc complete in all respect including scaffolding and safety provision 3 Grading roof for water proofing treatment with water proffing compound Cement concrete 1:2:4(1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) 4 Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement: 2 coarse sand : 4 stone aggregate 10mm and down gauge) including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design 5 Crazy marble stone flooring 20mm thick marble stone with black or of specified colour topping including filling the gaps with cement marble chips mix in proportion of 4 : 7 (4cement : 7 white black or white or black marble chips) size from 1mm to 4mm by volume and under layer of 25mm thick cement concrete [1:2:4, graded stone aggregate 12.5mm nominal size]rubbing and polishing and cement slurry etc. complete : In ordinary cement. 6 Painting with synthetic enamel paint of approved brand andmanufacture to give an even shade : One or more coats on old work 7 Providing and laying in position cement concrete includingcuring, compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level . M20 grade Nominal Mix 1: 1.5: 3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20mm nominal size). 8 Demolishing stone rubble masonry manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge : In cement mortar. 9 Brick work with F.P.S. bricks of class designation 75 insuperstructure above plinth level upto floor V level in allshapes and sizes in : Cement mortar 1 : 6 (1 cement : 6 coarse sand) 10 Providing and fixing pressed steel door frames confirming toIS 4351 manufactured from commercial mild steel sheet of1.25 mm thickness including hinges jamb, lock jamb, bead and if required angle threshold of mild steel angle of section50x25mm, or base ties of 1.25mm pressed mild steel weldedor rigidly fixed together by mechanical means, adjustable lugs with split end tail to each jamb including steel butt hinges 2.5mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface including filling with CC 1:2:4(M15 grade) complete as directed by Engineer-incharge : Profile C 11 Providing and fixing external grade board solid core singleleaf flush door shutters ISI 2202-67 marked using Phenolformal dehyderesin in glue both sides with approved steelfittings complete as per annexure A : 30 mm thick, Commercial Veneer both side 12 Wall painting with plastic emulsion paint of approved brandand manufacture to give an even shade including allscaffolding : Old work (One or more coats ) 13 Supplying and fixing wood work in frames of wall panelling,false ceiling partition wall etc. as per approved design anddrawing including antitermite treatment. Hollock wood Grade - I. 14 Providing & Fixing Commercial Ply as per IS 710 : 1976BWR of approved make for making wardrobe/shelves andother furniture with fevicol & nails complete as per approved by engineer in charge. 18 mm thick 15 Providing and Fixing Cushion Vinyl/Fully flexible Vinyl Flooring confirming to I.S.-3462 Flooring of approved makewith fibre base using rubber base adhesives including rollingwith light wooden roller complete : 2.0 mm thick. 16 Providing and fixing 12 mm thick prelaminated three layermedium density (exterior grade ) particle board Grade I, TypeII conforming to IS : 12823 bonded formaldehyde syntheticresin ,of approved brand and manufacture in paneling fixed in aluminium doors ,windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as perarchitectural drawings and direction of engineer-in-charge. Prelaminated particle board with decorative lamination onboth sides . 17 Providing and fixing glazing in aluminium door, window,ventilator shutters and partitions etc. with PVS / neoprenegasket etc. complete as per the architectural drawings and the directions of engineer-in-charge.(Cost of aluminium snapbeading shall be paid in basic item.) With float glass panes of 5.0 mm thickness ( weight not less than 13.50 kg/sqm) 18 Providing and fixing curtain rods of 1.25 mm thick chromiumplated brass plate, with two chromium plated brass bracketsfixed with C.P. brass screws and wooden plugs, etc., wherever necessary complete: 20 mm 19 Structural steel work in single section fixed with or withoutconnecting plate including cutting, hoisting ( height upto 10m), fixing in position and applying a priming coat of approved steel primer all complete. 20 Dismantling stone slab/ terrazo chip flooring laid in cementmortar including stacking of serviceable material and disposal of unserviceable material within 50 meters lead. 21 Providing and laying in position cement concrete includingcuring, compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level. 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size). 22 Kota stone slab flooring 25 mm thick over 20 mm (average)thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab includingrubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) For area of each slab from 2001 to 5000 Sq.Cm

INR 500 /-

INR 14000.0 /-

INR 7 Lakhs /-