General Renovation And Maintenance In Superspeciality And Janana Wing At Mdm Hospital, Jodhpur - Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineerin-charge. 1: 3: 6 or richer mix. 13.11 Cum 637.00 P. Cum 8352.00 2 14.23. 1 Dismantling tile work in floors and roofs laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 meter lead:For thickness of tiles 10mm to 25mm. 458.84 Sqm 20.00 P. Sqm 9177.00 3 12.3.2 Plaster on new surface on walls in cement sand mortar 1:6 including racking of joint etc. complete fine finish :20mm thick. 760.77 Sqm 190.00 P. Sqm 144546.00 4 13.1 Repairs to plaster of thickness 12mm to 20mm in patches of area 2.5 sq. metres and under including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50 m lead With cement mortar 1 :4 ( 1 cement : 4 coarse sand) 30.00 Sqm 235.00 P. Sqm 7050.00 5 10.17. 1 Grading roof for water proofing treatment with water proffing compound Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) 18.11 Cum 4483.00 P. Cum 81193.00 6 11.27 Filling of sunk portion of roof with earthen pots of required height including filling voids with 1:3:6 light concrete, using brick bats complete levelling and dressing the surface by 50mm thick cement concrete 1:2:4 as per specification 6.48 Cum 1775.00 P. Cum 11502.00 7 7.13 Providing and fixing 1st quality MAT finished ceremic tile size 300x300mm confirming to IS : 13755 and IS : 15622 colour such as white, grey, ivory, fume red brown, light green, light blue and other light shades in floors, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete (including the cost of cement mortar bed 1:4). 65.81 Sqm 748.00 P. Sqm 49224.00 8 7.21.2 Providing and fixing 1st quality MAT & GLOSSY finished ceramic tile confirming to IS : 13755 and IS : 15622 colour such as white, grey, ivory, fume red brown, light green, light blue and other light shades in floors, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete (including the cost of cement mortar bed 1:4).Size 300mm x 450mm 460.84 Sqm 809.00 P. Sqm 372818.00 G-Schedule NIT No. 09/ 2024-25, S.No. 05 Name of work :- General Renovation and Maintenance in Superspeciality and Janana wing at MDM Hospital, Jodhpur S.N. Item Qty. Unit Rate Per Amount 9 7.18.2 P & F 1st qualityVitrified Porcelain Polished tiles on floor, skirting and steps etc.in different sizes (thickness to be specified by manufactuer) with water absortion less than 0.08% and conforming to IS 15622 of approved make in all colour and shade, laid with 20 mm thick CM 1 : 4 including grounting the joints with white cement and matching pigment etc complete.size 600 mm X 600 mm 30.00 Sqm 911.00 P. Sqm 27330.00 10 7.19 Add extra for Fixing glazed/ Ceramic/ Vitrified floor tiles with cement based high polymer modified quick-set tile adhesive (Water based) conforming to IS: 15477 , using 5kg. adhesive per sqm of tile area, in average 3mm thickness instead of cement mortar. 490.84 Sqm 128.00 P. Sqm 62827.00 11 12.22. 2 Providing and applying white cement based putty over plastered surface to prepare the surface even and smooth complete Old Plastered Surface (two or more coats) 3030.00 Sqm 46.00 P. Sqm 139380.00 12 12.38 Distempering with 1st quality acrylic washable distemper (ready mixed) of approved manufacturer and of required shade and colour completeincluding all scaffolding as per manufacturers specification. Two or more coats on new work including prepartion of base with primer, putty, lippy etc complete in all respect. 3030.00 Sqm 43.00 P. Sqm 130290.00 13 12.44. 1 Finishing walls with textured exterior paint of required shade as per approved colour complete as per manufacturers specifications including primer coat and protecting coat including scaffolding and safety provision Roller Finish av. thickness 400 to 500 microns. 300.00 Sqm 171.00 P. Sqm 51300.00 14 12.46. 1 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work 400.00 Sqm 69.00 P. Sqm 27600.00 15 12.31. 3 Pointing on stone masonry in cement sand mortar 1:3 (1 cement : 3 sand) :Deep groove pointing 400.00 Sqm 220.00 P.Sqm 88000.00 16 14.57 Removing aluminium/Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material with in 50 meters lead as directed by Engineer-in-charge. 80.00 Sqm 17.00 P. Sqm 1360.00 S.N. Item Qty. Unit Rate Per Amount 17 10.28 Providing and fixing 14 mm thick Acoustical with fine fissured tiles/ Mineral fibre high density tiles with butt edges false ceiling tiles of size 595x595 mm in true horizontal level suspended on inter locking metal grid of hot dipped galvanised steel sections ( galvanized @ 170 gsm/sqm.) consisting of main “T” runner with suitably spaced joints to get required length and of size 24x38mm made from 0.30mm thick (minimum) sheet spaced at 1200mm center to center and cross “T” of size 24x25mm made of 0.30mm thick (minimum) sheet, 1200mm long spaced between main “T” at 600mm center to center to form a grid of 1200x600 mm and secondary cross “T” of length 600mm and size 24x25mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600mm panel to 80.00 Sqm 1063.00 P. Sqm 85040.00 18 7.3.3 Providing and fixing stone slabs table rubbed, 15- 18 mm thick in Walls, Steps, Pillars, Counters, Jambs, Shelves, Sills etc. laid on 12mm (Av.) thick base of CM 1:3 (1 cement : 3 coarse sand) jointing with white cement mortar 1:2 (1white cement : 2 marble dust) with pigment to match the shade of the marble slab including grinding, rubbing and polishing complete. Keseriaji/ Abu Ambaji (Green Marble) Above 3601 Cm2 Slabs 110.00 Sqm 1674.00 P. Sqm 184140.00 19 6.17.3 Supplying and fixing in walls machine cut and polished stone shelves, tands and in CM 1:3 with machine cut edges : Kota stone minimum 30mm thick. 21.60 Sqm 609.00 P. Sqm 13154.00 20 7.6.2(i ) Extra for providing edge moulding to 15-18mm thick marble/ Granite/Kota stone counters, Vanities etc. including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. Granite/Kota Stone Work Full Edge moulding 100.00 Mtr. 233.00 RMtr. 23300.00 21 10.1.2 Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead and including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/ vertical or curved surfaces) excluding the cost of purlins, rafters and trusses and including cutting to size and shape whenever required. 0.80 mm thick with zinc coating not less than 275 gm/m2 140.00 Sqm 765.00 P. Sqm 107100.00 S.N. Item Qty. Unit Rate Per Amount 22 9.8+9. 8.1 Providing and fixing steel gate, grating , and grills made of angles, tees, square bars, flats,or black pipe with holdfast and fittings complete as per design and drawing including cutting welding and fabrication with priming coat of red oxide + Extra if square,rectangular hollow tubelar sections are used or grill made by flats only 1300.00 Kgs 105.60 P.Kg 137280.00 23 16.1.1. 1 Providing and fixing aluminum work for doors ,windows, ventilators and partition with extruded built up standard tubular / appropriate Z sections and other sections of approved make conforming to IS :733 and IS :1285, fixed with rawl plugs and screws or with fixing clips ,or with expansion hold fasteners including necessary filling up of gap. at junctions , at top ,bottom and sides with required PVC/neoprene felt etc. Aluminium section shall be smooth ,rust free, straight ,mitered and jointed mechanically wherever required including cleat angle Aluminium snap beading for glazing /paneling , C.P. brass/ stainless steel screws Al. Tower bolt & Al. handle & Al. Aldrop etc.,all complete as per architectural drawings and the directions of Engineer- in – charge .(Glazing and paneling to be paid for separately). For fixed portion Anodised aluminum (anodised transparent 81 dyed to required shade according to IS : 1868. (Minimum anodic coating of grade AC 15, Anodizing to be got done from approved Anodizer) 262.50 Kg 326.00 P. Kg 85575.00 24 16.1.2. 1 Providing and fixing aluminum work for doors ,windows, ventilators and partition with extruded built up standard tubular / appropriate Z sections and other sections of approved make conforming to IS :733 and IS :1285, fixed with rawl plugs and screws or with fixing clips ,or with expansion hold fasteners including necessary filling up of gap. at junctions , at top ,bottom and sides with required PVC/neoprene felt etc. Aluminium section shall be smooth ,rust free, straight ,mitered and jointed mechanically wherever required including cleat angle Aluminium snap beading for glazing /paneling , C.P. brass/ stainless steel screws Al. Tower bolt & Al. handle & Al. Aldrop etc.,all complete as per architectural drawings and the directions of Engineer- in – charge .(Glazing and paneling to be paid for separately). For shutters builtup standard tubular sections of openable doors ,windows & ventilators including providing & fixing hinges / rollers etc. and making provision for fixing of fittings wherever required (lockes shall be paid for separately). Anodised aluminum (anodised transparent 81 dyed to required shade according 97.92 Kg 355.00 P. Kg 34762.00 S.N. Item Qty. Unit Rate Per Amount 25 16.4.1 Providing and fixing 12 mm thick prelaminated three layer medium density (exterior grade ) particle board Grade I, Type II conforming to IS : 12823 bonded formaldehyde synthetic resin ,of approved brand and manufacture in paneling fixed in aluminium doors ,windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and direction of engineer-in-charge.Pre-laminated particle board with decorative lamination on one side and balancing lamination on other side. 37.50 Sqm 1030.00 P.sqm 38625.00 26 16.5.2 Providing and fixing glazing in aluminium door, window ,ventilator shutters and partitions etc. with PVS / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge.(Cost of aluminium snap beading shall be paid in basic item.) With float glass panes of 5.0 mm thickness ( weight not less than 13.50 kg/sqm) 40.70 Sqm 902.00 P. Sqm 36711.40 27 9.5 Providing and fixing T-iron frames for doors, windows and ventilators of mild steel Teesections, joints mitred and welded with 15x3 mm lugs 10cm long embedded in cement concrete blocks 15x10x10 cm of 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) or with wooden plugs and screws or rawl plugs and screws or with fixing clips or with bolts and nuts as require including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer. 396.00 Kg 83.00 Kg 32868.00 28 8.13.2. 1 Providing and fixing external grade board solid core single leaf flush door shutters ISI 2202-67 marked using Phenol formal dehyderesin in glue both sides with approved steel fittings complete as per annexure A :30 mm thick .Commercial Veneer both side 34.02 Sqm 1841.00 P. Sqm 62631.00 29 8.35.2 Providing & Fixing mica of approved make for inner/outer side of shutters with fevicol & nails complete as per approved by engineer in charge. 0.8mm thick mica 68.04 Sqm 762.00 P. Sqm 51846.00 30 3.1.6 Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level. M10 grade Nominal Mix 1: 4: 8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40mm nominal size). 12.00 Cum 3302.00 P. Cum 39624.00 S.N. Item Qty. Unit Rate Per Amount 31 7.47.3 (Road BSR, 2022) Providing and fixing of Precast concrete interlocking blocks manufactured and laid over a sand bed of 20 -40mm thick as per IRC SP 63- 2004 and IS 15658 -2006. Complete job to be executed as per the instructions of Engineer-incharge. The rates are inclusive of all lead, lifts & taxes 80mm thick, Medium traffic category, M40 Grade designation blocks 78.00 Sqm 840.00 P. Sqm 65520.00 32 11.16. 2 Providing & laying Chequered terrazzo tiles of approved make 22mm thick with marble chips of size upto 6mm, in floors, jointed with neat cement slurry mixed wit pigment to match the shade of tiles including rubbing and polishing complete in all respect as per specification, on 28mm thick bed of C.M. 1:4 :Medium shade using approximately 50% white cement and 50% ordinary cement. 40.00 Sqm 683.00 P. Sqm 27320.00 33 7.52 (Road BSR) Providing and fixing Machine pressed cement concrete (M-20) compressed with hydraulic compression machine kerbs or dands of size upto 60 cm. Length as per drawing, jointing with cement mortar (1:3) over 20mm thick base cement mortar (1:6) & painting the exposed surface with enamel paint of approved brand complete work as per direction of Engineer-incharge size 15 cm. x 38 cm.. 140.00 Mtr. 275.00 P mtr 38500.00 34 1.2.2 P & F Indian type white glazed vitreous china 1st quality W.C. orissa pan (IS :2556 Mark) with 100 mm vitreous china P or S trap including cutting and making good the wall and floor: Size 580x440mm. 3.00 Each 3080.00 Each 9240.00 35 1.3 P & F European type white glazed vitreous china 1st quality W.C pan (IS : 2556 Mark) with P or S trap including cutting and making good the wall and floo 12.00 Each 2420.00 Each 29040.00 36 1.7.2 P & F water closet Seat Covers with brass hinges complete : Solid PVC (IS 2548 marked) grade-I White for EWC. 12.00 Each 485.00 Each 5820.00 37 1.59 P & F Jet spray for water closet with C.P. Copper Tube flange of approved make. 12.00 Each 381.00 Each 4572.00 38 2.12.1 P & F Inlet Connection (Angle Valves) Superior quality, of approved make, for Wash basin, Gyser etc. C.P. Inlet connection 15mm.Brass (IS : 8931 marked) 51.00 Each 501.00 Each 25551.00 39 3.44.2 Providing and Fixing Unplasticized Poly Vinyl Chloride (UPVC) SWR Pipes Type B for sciland waste discharge system (IS:13592 : 1992 Marked) of approved quality /make 110 mm dia 120.00 Mtr. 336.00 P.Mtr. 40320.00 40 3.45.2 5 Providing and Fixing Unplasticized Poly Vinyl Chloride (UPVC) SWR Pipes fittings type B for sciland waste discharge system (IS:13592 : 1992 Marked) of approved quality /make Nahni Trap with Jali 4” 110mm dia 47.00 Each 171.00 Each 8037.00 S.N. Item Qty. Unit Rate Per Amount 41 2.37 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes (IS 15778 : 2007 code) having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1 metre spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. (Internal work Exposed on wall) 50.00 Mtr. 802.00 P.Mtr. 40100.00 42 2.38.3 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes (IS 15778 : 2007 code) having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. (Concealed work including cutting chases and making good the walls etc.,)25 mm nominal size 200.00 Mtr. 376.00 P.Mtr. 75200.00 43 2.38.2 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes (IS 15778 : 2007 code) having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. (Concealed work including cutting chases and making good the walls etc.,)20mm nominal size 180.00 Mtr. 289.00 P.Mtr. 52020.00 44 3.45.1 (ii) Providing and Fixing Unplasticized Poly Vinyl Chloride (UPVC) SWR Pipes fittings type B for sciland waste discharge system (IS:13592 : 1992 Marked) of approved quality /make Coupler 110mm dia 48.00 Each 108.00 Each 5184.00 45 3.45.4 (ii) Bend 87.5 Dg. 110mm dia 24.00 Each 155.00 Each 3720.00 46 3.45.5 (ii) Bend 45 Dg. 110mm dia 12.00 Each 132.00 Each 1584.00 47 3.45.6 (ii) Door Bend 87.5 Dg. 110mm dia 24.00 Each 193.00 Each 4632.00 48 3.45.7 (ii) Single Y 110mm dia 48.00 Each 278.00 Each 13344.00 49 3.45.1 2(ii) Pipe Clip 110mm dia 36.00 Each 31.00 Each 1116.00 50 3.45.1 7(ii) Single Tee with Door 110mm dia 24.00 Each 242.00 Each 5808.00 51 3.45.3 0(ii) Vent Cowel 110mm dia 12.00 Each 59.00 Each 708.00 S.N. Item Qty. Unit Rate Per Amount 52 2.7.7 P & F Bib Cock (IS : 8931 Mark), Superior quality of approved make: Synthetic Material(PTMT) bib cock of approved quality/ make, nominal bore, 15mm, 86 mm long. 50.00 Each 187.00 Each 9350.00 53 1.38.9. 3 1.0 mm thick stainless steel AISI -304 & IS 13983- 1994 kitchen sink of approved make as per Engineer-in-charge with large waste coupling.Overall size 24 x 18 x 8 Bowl size 20x16x8 2.00 Each 5062.00 Each 10124.00 54 1.36.2 P & F WVC Wash basin (Ist quality IS:2556 Mark) of approved make with C.I. brackets duly painted 1 No. 15 mm C.P. Pillar cock (IS:8934 Mark) & 32 mm C.P. brass waste coupling of approved make, P.V.C Waste pipe with PVC nut 32 mm complete including cutting & making good the wall : Size 510 mm x 400 mm 13.00 Each 2408.00 Each 31304.00 55 1.40 P & F 1st quality WVC pedestal for wash basin. 13.00 Each 1444.00 Each 18772.00 56 1.73 P & F Premium quality Low level Flushing Cistern of 10 litres capacity (IS:2556 mark) of approved make as per Engineer-in-charge with complete fittings C.I. brackets duly painted, brass ball cock with ball, (IS:1703 mark) complete including cutting and making good the wall : 20.00 Each 1823.00 Each 36460.00 57 3.21.3 + 3.21.3. 1 Construction of chamber in all type of soil with 300 mm thick masonry in CM 1:6 m,10 cm thick C.C. 1:5:10 in foundation, 20mm thick insider plaster in Cm 1:6, finished with floating neat cement, 50mm thick M-15 grade C.C. flooring , earthwork etc. complete as per design including disposal of surplus earth within a lead of 50 mtr.- do- size 600 x 450mm depth upto 0.5 M Cement cover with frame.Deduct for using brick work 230 mm thick in place of 300 mm thick stone masonry 10.00 Each 2770.00 Each 27700.00 58 2.13.4 P & F 15 mm. Dia Connection Pipe of approved quality/make :PVC pipe with C.P. Brass nuts upto length, 600mm. 42.00 Each 116.00 Each 4872.00 59 2.8.4 P & F Stop Cock (IS :8931 Mark), superior quality & of approved make: C.P. Brass 15mm nominal bore. 10.00 Each 477.00 Each 4770.00 60 2.8.4 P & F Stop Cock (IS :8931 Mark), superior quality & of approved make: C.P. Brass 1350gm. 25 mm nominal bore. 10.00 Each 729.00 Each 7290.00 61 17.48 P/F wall mounted 600mm long grab bar as approved design, made of 35mm stainless stell pipe having anti-bacterial Nylon surface with contour finish for better grip. Grab bar should be mounted on wall at height of 800mm from the finish floor level complete in all respect as per Harmonized guidline & Satification of Engineerin Charges. Make Cera (B2210106) 20.00 Each 1678.00 Each 33560.00 S.N. Item Qty. Unit Rate Per Amount 62 3.18.1 Raising manhole cover and frames slab to required level including dismantling existing slab and making good the damage as required (raising depth of manhole masonry to be paid separately). Rectangular manhole 90x60 cm 6.00 Each 972.00 Each 5832.00 63 3.32 Supplying and fixing Ferro- cement cover with C.I. frame for chambers & man holes of size. 500mm dia 12 Kg.-do-15 MT centre point load (medium duty). 15.00 Each 2487.00 Each 37305.00 64 3.48 Cleaning of sewer line of various sizes as per requirement at site of different sizes including 100mm,150mm & 225mm dia of Stoneware pipe as per direction of Engineer-in-Charge. 40.00 mtr 117.00 P. mtr 4680.00 65 3.55.3 Mechanised Cleaning and desilting of manhole/sewer line chambers With the help of mechanical bucket which gets open and close through levers. Depth upto 2.0 mtr. 10.00 Each 339.00 Each 3390.00 66 2.11 P & F Ball Cock (IS :1703 Mark) with Rod & P.V.C. Ball complete : Brass wt.Not less than 400 gm, 20mm. 20.00 Each 372.00 Each 7440.00 67 4.2 (11) Building Rubbish Stone metal (Grit and ballast etc.)For 10 Km
