General Renovation And Maintenance Work In New Opd Block At Mdm Hospital, Jodhpur - Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineerin-charge. 1: 3: 6 or richer mix. 159.15 Cum 637.00 P. Cum 101379.00 2 14.23. 1 Dismantling tile work in floors and roofs laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 meter lead:For thickness of tiles 10mm to 25mm. 1201.40 Sqm 20.00 P. Sqm 24028.00 3 14.55 Dismantling old plaster or skirting, raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 meter lead. 1201.40 Sqm 15.00 P. Sqm 18021.00 4 3.1.6 Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level. M10 grade Nominal Mix 1: 4: 8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40mm nominal size). 12.60 Cum 3302.00 P. Cum 41605.00 5 7.47.3 (Road BSR, 2022) Providing and fixing of Precast concrete interlocking blocks manufactured and laid over a sand bed of 20 -40mm thick as per IRC SP 63- 2004 and IS 15658 -2006. Complete job to be executed as per the instructions of Engineer-incharge. The rates are inclusive of all lead, lifts & taxes 80mm thick, Medium traffic category, M40 Grade designation blocks 41.00 Sqm 840.00 P. Sqm 34440.00 6 12.3.2 Plaster on new surface on walls in cement sand mortar 1:6 including racking of joint etc. complete fine finish :20mm thick. 1201.40 Sqm 190.00 P. Sqm 228266.00 7 10.17. 1 Grading roof for water proofing treatment with water proffing compound Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) 33.97 Cum 4483.00 P. Cum 152288.00 8 16.56 Providing and fixing stainless steel railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineerin-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). Grade 304 50.00 Kg 503.00 P. Kg 25150.00 G-Schedule NIT No. 08/ 2024-25, S.No. 04 Name of work :- General Renovation and Maintenance work in New OPD Block at MDM Hospital, Jodhpur S.N. Item Qty. Unit Rate Per Amount 9 11.27 Filling of sunk portion of roof with earthen pots of required height including filling voids with 1:3:6 light concrete, using brick bats complete levelling and dressing the surface by 50mm thick cement concrete 1:2:4 as per specification 152.85 Cum 1775.00 P. Cum 271309.00 10 7.13 Providing and fixing 1st quality MAT finished ceremic tile size 300x300mm confirming to IS : 13755 and IS : 15622 colour such as white, grey, ivory, fume red brown, light green, light blue and other light shades in floors, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete (including the cost of cement mortar bed 1:4). 339.68 Sqm 748.00 P. Sqm 254080.00 11 7.21.2 Providing and fixing 1st quality MAT & GLOSSY finished ceramic tile confirming to IS : 13755 and IS : 15622 colour such as white, grey, ivory, fume red brown, light green, light blue and other light shades in floors, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete (including the cost of cement mortar bed 1:4).Size 300mm x 450mm 1201.40 Sqm 809.00 P. Sqm 971933.00 12 7.19 Add extra for Fixing glazed/ Ceramic/ Vitrified floor tiles with cement based high polymer modified quick-set tile adhesive (Water based) conforming to IS: 15477 , using 5kg. adhesive per sqm of tile area, in average 3mm thickness instead of cement mortar. 1201.40 Sqm 128.00 P. Sqm 153779.00 13 12.40. 1 Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade including all scaffolding: Two or more coats on new work including prepartion of base with primer, putty, lippy etc complete in all respect. 2000.00 Sqm 80.00 P. Sqm 160000.00 14 9.5 Providing and fixing T-iron frames for doors, windows and ventilators of mild steel Teesections, joints mitred and welded with 15x3 mm lugs 10cm long embedded in cement concrete blocks 15x10x10 cm of 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) or with wooden plugs and screws or rawl plugs and screws or with fixing clips or with bolts and nuts as require including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer. 880.00 Kg 83.00 Kg 73040.00 15 8.13.2. 1 Providing and fixing external grade board solid core single leaf flush door shutters ISI 2202-67 marked using Phenol formal dehyderesin in glue both sides with approved steel fittings complete as per annexure A :30 mm thick .Commercial Veneer both side 63.01 Sqm 1841.00 P. Sqm 116001.00 S.N. Item Qty. Unit Rate Per Amount 16 8.35.2 Providing & Fixing mica of approved make for inner/outer side of shutters with fevicol & nails complete as per approved by engineer in charge. 0.8mm thick mica 126.00 Sqm 762.00 P. Sqm 96012.00 17 7.3.3 Providing and fixing stone slabs table rubbed, 15- 18 mm thick in Walls, Steps, Pillars, Counters, Jambs, Shelves, Sills etc. laid on 12mm (Av.) thick base of CM 1:3 (1 cement : 3 coarse sand) jointing with white cement mortar 1:2 (1white cement : 2 marble dust) with pigment to match the shade of the marble slab including grinding, rubbing and polishing complete. Keseriaji/ Abu Ambaji (Green Marble) Above 3601 Cm2 Slabs 25.00 Sqm 1674.00 P. Sqm 41850.00 18 6.17.3 Supplying and fixing in walls machine cut and polished stone shelves, tands and in CM 1:3 with machine cut edges : Kota stone minimum 30mm thick. 21.60 Sqm 609.00 P. Sqm 13154.00 19 7.6.2(i ) Extra for providing edge moulding to 15-18mm thick marble/ Granite/Kota stone counters, Vanities etc. including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. Granite/Kota Stone Work Full Edge moulding 50.00 Mtr. 233.00 RMtr. 11650.00 20 1.2.2 P & F Indian type white glazed vitreous china 1st quality W.C. orissa pan (IS :2556 Mark) with 100 mm vitreous china P or S trap including cutting and making good the wall and floor: Size 580x440mm. 25.00 Each 3080.00 Each 77000.00 21 1.3 P & F European type white glazed vitreous china 1st quality W.C pan (IS : 2556 Mark) with P or S trap including cutting and making good the wall and floor 25.00 Each 2420.00 Each 60500.00 22 1.7.2 P & F water closet Seat Covers with brass hinges complete : Solid PVC (IS 2548 marked) grade-I White for EWC. 35.00 Each 485.00 Each 16975.00 23 1.59 P & F Jet spray for water closet with C.P. Copper Tube flange of approved make. 25.00 Each 381.00 Each 9525.00 24 1.14.1 P & F lst quality WVC Urinal (IS:2556 mark) with 25mm dia G.I. waste pipe, dome waste couplings, concealed iron brackets or screws etc complete. Flat Back (small) size 456x355x265mm. 18.00 Each 1832.00 Each 32976.00 25 2.12.4 P & F Inlet Connection (Angle Valves) Superior quality, of approved make, for Wash basin, Gyser etc. synthetic Material (PTMT) Inlet connection of approved quality/make 15 mm nominal size. 231.00 Each 240.00 Each 55440.00 26 3.44.2 Providing and Fixing Unplasticized Poly Vinyl Chloride (UPVC) SWR Pipes Type B for sciland waste discharge system (IS:13592 : 1992 Marked) of approved quality /make 110 mm dia 415.74 Mtr. 336.00 P.Mtr. 139689.00 27 3.45.2 5 Providing and Fixing Unplasticized Poly Vinyl Chloride (UPVC) SWR Pipes fittings type B for sciland waste discharge system (IS:13592 : 1992 Marked) of approved quality /make Nahni Trap with Jali 4” 110mm dia 132.00 Each 171.00 Each 22572.00 S.N. Item Qty. Unit Rate Per Amount 28 2.38.3 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes (IS 15778 : 2007 code) having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. (Concealed work including cutting chases and making good the walls etc.,)25 mm nominal size 250.54 Mtr. 376.00 P.Mtr. 94203.00 29 2.38.2 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes (IS 15778 : 2007 code) having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. (Concealed work including cutting chases and making good the walls etc.,)20mm nominal size 200.60 Mtr. 289.00 P.Mtr. 57973.00 30 3.45.1 (ii) Providing and Fixing Unplasticized Poly Vinyl Chloride (UPVC) SWR Pipes fittings type B for sciland waste discharge system (IS:13592 : 1992 Marked) of approved quality /make Coupler 110mm dia 114.00 Each 108.00 Each 12312.00 31 3.45.4 (ii) Bend 87.5 Dg. 110mm dia 104.00 Each 155.00 Each 16120.00 32 3.45.5 (ii) Bend 45 Dg. 110mm dia 77.00 Each 132.00 Each 10164.00 33 3.45.6 (ii) Door Bend 87.5 Dg. 110mm dia 32.00 Each 193.00 Each 6176.00 34 3.45.7 (ii) Single Y 110mm dia 123.00 Each 278.00 Each 34194.00 35 3.45.1 1 (ii) Socket Plug 110mm dia 45.00 Each 76.00 Each 3420.00 36 3.45.1 2 (ii) Pipe Clip 110mm dia 51.00 Each 31.00 Each 1581.00 37 3.45.1 6 (ii) Single Tee 110mm dia 30.00 Each 210.00 Each 6300.00 38 3.45.1 7 (ii) Single Tee with Door 110mm dia 29.00 Each 242.00 Each 7018.00 39 3.45.3 0 Vent Cowel 110mm dia 25.00 Each 59.00 Each 1475.00 40 2.7.7 P & F Bib Cock (IS : 8931 Mark), Superior quality of approved make Synthetic Material(PTMT) bib cock of approved quality/ make, nominal bore, 15mm, 86 mm long. 108.00 Each 187.00 Each 20196.00 S.N. Item Qty. Unit Rate Per Amount 41 1.36.2 P & F WVC Wash basin (Ist quality IS:2556 Mark) of approved make with C.I. brackets duly painted 1 No. 15 mm C.P. Pillar cock (IS:8934 Mark) & 32 mm C.P. brass waste coupling of approved make, P.V.C Waste pipe with PVC nut 32 mm complete including cutting & making good the wall : Size 510 mm x 400 mm 19.00 Each 2408.00 Each 45752.00 42 1.73 P & F Premium quality Low level Flushing Cistern of 10 litres capacity (IS:2556 mark) of approved make as per Engineer-in-charge with complete fittings C.I. brackets duly painted, brass ball cock with ball, (IS:1703 mark) complete including cutting and making good the wall : 59.00 Each 1823.00 Each 107557.00 43 3.20.1 Construction of Man hole, in all types of soil, inner size 1.5 x 1.2 M, with 450mm thick masonry in CM 1:6, 10 Cm. thick cement concrete 1:5:10 in foundation, 20mm thick inside plaster in CM 1:6, finished with floating neat cement, 50 mm thick M-15 grade C.C. flooring making channels, 80 mm thick stone slab covering with 40 mm thick M-15 grade C.C. flooring, Ferro Cement cover with frame of 450mm dia, earthwork etc. complete including disposal of surplus earth within 50 mtr. lead as per design : Depth up to 1.5 M 5.00 Each 20016.00 Each 100080.00 44 3.21.3 + 3.21.3. 1 Construction of chamber in all type of soil with 300 mm thick masonry in CM 1:6 m,10 cm thick C.C. 1:5:10 in foundation, 20mm thick insider plaster in Cm 1:6, finished with floating neat cement, 50mm thick M-15 grade C.C. flooring , earthwork etc. complete as per design including disposal of surplus earth within a lead of 50 mtr.- do- size 600 x 450mm depth upto 0.5 M Cement cover with frame.Deduct for using brick work 230 mm thick in place of 300 mm thick stone masonry 8.00 Each 2770.00 Each 22160.00 45 3.8.2 Providing, Laying & Jointing R.C.C. class NP-2 Non-Pressure pipes (IS : 458mark) of approved make with collars, jointed with C.M. 1:2 or having Spigot and socket ends with flexible rubber rings joint including testing of joints etc. complete :150mm dia Internal 70.00 Mtr. 600.00 P. Mtr 42000.00 46 1.6 Earth work in excavation by mechanical means (Hydraulic excavator )/ manual means over areas (exceeding 30cm in depth. 1.5m in width as well as 10 sqm on plan) including disposal of excavated earth, lead upto 50m and lift upto 1.5 m , disposed earth to be levelled and neatly dressed : All kinds of soil 42.00 Cum 175.00 P. Cum 7350.00 47 3.32.2 Supplying and fixing Ferro- cement cover with C.I. frame for chambers & man holes of size. 500mm dia 12 Kg.-do-15 MT centre point load (medium duty). 15.00 Each 2487.00 Each 37305.00 S.N. Item Qty. Unit Rate Per Amount 48 3.48 Cleaning of sewer line of various sizes as per requirement at site of different sizes including 100mm,150mm & 225mm dia of Stoneware pipe as per direction of Engineer-in-Charge. 100.00 mtr 117.00 P. mtr 11700.00 49 3.55.3 Mechanised Cleaning and desilting of manhole/sewer line chambers With the help of mechanical bucket which gets open and close through levers. Depth upto 2.0 mtr. 20.00 Each 339.00 Each 6780.00 50 1.38.9. 3 1.0 mm thick stainless steel AISI -304 & IS 13983- 1994 kitchen sink of approved make as per Engineer-in-charge with large waste coupling.Overall size 24 x 18 x 8 Bowl size 20x16x8 2.00 Each 5062.00 Each 10124.00 51 2.13.4 P & F 15 mm. Dia Connection Pipe of approved quality/make :PVC pipe with C.P. Brass nuts upto length, 600mm 110.00 Each 116.00 Each 12760.00 52 2.8.4 P & F Stop Cock (IS :8931 Mark), superior quality & of approved make: C.P. Brass 15mm nominal bore. 19.00 Each 477.00 Each 9063.00 53 16.1.1. 1 Providing and fixing aluminum work for doors ,windows, ventilators and partition with extruded built up standard tubular / appropriate Z sections and other sections of approved make conforming to IS :733 and IS :1285, fixed with rawl plugs and screws or with fixing clips ,or with expansion hold fasteners including necessary filling up of gap. at junctions , at top ,bottom and sides with required PVC/neoprene felt etc. Aluminium section shall be smooth ,rust free, straight ,mitered and jointed mechanically wherever required including cleat angle Aluminium snap beading for glazing /paneling , C.P. brass/ stainless steel screws Al. Tower bolt & Al. handle & Al. Aldrop etc.,all complete as per architectural drawings and the directions of Engineer- in – charge .(Glazing and paneling to be paid for separately).For fixed portionAnodised aluminum (anodised transparent 81 dyed to required shade according to IS : 1868. (Minimum anodic coating of grade AC 15, Anodizing to be got done from approved Anodizer) 140.00 Kg 326.00 P. Kg 45640.00 S.N. Item Qty. Unit Rate Per Amount 54 16.1.2. 1 Providing and fixing aluminum work for doors ,windows, ventilators and partition with extruded built up standard tubular / appropriate Z sections and other sections of approved make conforming to IS :733 and IS :1285, fixed with rawl plugs and screws or with fixing clips ,or with expansion hold fasteners including necessary filling up of gap. at junctions , at top ,bottom and sides with required PVC/neoprene felt etc. Aluminium section shall be smooth ,rust free, straight ,mitered and jointed mechanically wherever required including cleat angle Aluminium snap beading for glazing /paneling , C.P. brass/ stainless steel screws Al. Tower bolt & Al. handle & Al. Aldrop etc.,all complete as per architectural drawings and the directions of Engineer- in – charge .(Glazing and paneling to be paid for separately). For shutters builtup standard tubular sections of openable doors ,windows & ventilators including providing & fixing hinges / rollers etc. and making provision for fixing of fittings wherever required (l 69.12 Kg 355.00 P. Kg 24538.00 55 16.4 Providing and fixing 12 mm thick prelaminated three layer medium density (exterior grade ) particle board Grade I, Type II conforming to IS : 12823 bonded formaldehyde synthetic resin ,of approved brand and manufacture in paneling fixed in aluminium doors ,windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and direction of engineer-in-charge.Pre-laminated particle board with decorative lamination on one side and balancing lamination on other side. 27.00 Sqm 1030.00 P.sqm 27810.00 56 16.5.2 Providing and fixing glazing in aluminium door, window ,ventilator shutters and partitions etc. with PVS / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge.(Cost of aluminium snap beading shall be paid in basic item.) With float glass panes of 5.0 mm thickness ( weight not less than 13.50 kg/sqm) 21.00 Sqm 902.00 P. Sqm 18942.00 S.N. Item Qty. Unit Rate Per Amount 57 10.28 Providing and fixing 14 mm thick Acoustical with fine fissured tiles/ Mineral fibre high density tiles with butt edges false ceiling tiles of size 595x595 mm in true horizontal level suspended on inter locking metal grid of hot dipped galvanised steel sections ( galvanized @ 170 gsm/sqm.) consisting of main “T” runner with suitably spaced joints to get required length and of size 24x38mm made from 0.30mm thick (minimum) sheet spaced at 1200mm center to center and cross “T” of size 24x25mm made of 0.30mm thick (minimum) sheet, 1200mm long spaced between main “T” at 600mm center to center to form a grid of 1200x600 mm and secondary cross “T” of length 600mm and size 24x25mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600mm panel to form grids of 600x600mm and wall angle of size 21x21x0.30 mm and laying false ceiling tiles of approved texture in the grid including, wherever, required, cutting/making, opening for services like diffusers, grills, light fittings, fixtures, sm 50.00 Sqm 1063.00 P. Sqm 53150.00 58 4.2 (11) Building Rubbish Stone metal (Grit and ballast etc.)
