}

Tender For Work Of Tin Shed Of Toilet, Partition Of 1 Room, Repair, Painting Etc. In Liu Office In Reserve Police Line - Excavation In Foundation In Ordinary Soil (Loam Clay And Sand) Including Lift Upto 1.50 M And Lead Upto 30M And Including Filling Wate, bijnor-Uttar Pradesh

Police Department has published Tender For Work Of Tin Shed Of Toilet, Partition Of 1 Room, Repair, Painting Etc. In Liu Office In Reserve Police Line - Excavation In Foundation In Ordinary Soil (Loam Clay And Sand) Including Lift Upto 1.50 M And Lead Upto 30M And Including Filling Wate. Submission Date for this Tender is 12-02-2025. Shed Construction Tenders in bijnor Uttar Pradesh. Bidders can get complete Tender details and download the document.




Tender Notice

47578987
Tender For Work Of Tin Shed Of Toilet, Partition Of 1 Room, Repair, Painting Etc. In Liu Office In Reserve Police Line - Excavation In Foundation In Ordinary Soil (Loam Clay And Sand) Including Lift Upto 1.50 M And Lead Upto 30M And Including Filling Wate
Open Tender
Indian
Uttar Pradesh
Bijnor
12-02-2025

Tender Details

Tender For Work of tin shed of toilet, partition of 1 room, repair, painting etc. in LIU office in Reserve Police Line - Excavation in foundation in ordinary soil (loam clay and sand) including lift upto 1.50 M and lead upto 30M and including filling watering and ramming of excavated earth into the trenches or into the space between the building and the side of foundation treches as per S.I. No. 251 2 Cement Concrete with 4 cm gauge stone ballast coarse sand and cement in proportion 8:4:1 in foundation i/c supply of all material, labour & T&P required for proper completion of the work as per S.I. No. 281 3 Cement Concrete with 2 cm gauge stone ballast coarse sand and cement in proportion 4:2:1 in foundation i/c supply of all material, labour & T&P required for proper completion of the work as per S.I. No. 279a 4 M-150 brick work in 1:3 (one cement and three part Coarse sand) i/c supply of all material, labour, T&P etc. required for proper completion of work as per S.I. No. 307+309. 5 12 mm Thick Plaster with cement and approved fine sand in proportion 1:4 over brick work including supply of all materials labour and T&P etc. required for proper completion of the work as per S.I. No. 584 Ch. 13. 6 Distempring 2 coat with oil bound distemper of approved brand and manufacture and required shade on undecorated wall surface to with an even shade over and including a primer coat with cement primer of approved brand and manufacture such as of British, Shalimar asian paint after throughtly brushing the surface free from mortar droppings and other froeign matter and also including preparing the surface even and sand prepared smooth including cost of all materials. As per S.I. No. 649+650. 7 Painting 1 coats over priming coat (excluding cost of priming coat) on wood or steel and other metal surface with superior synthetic enamel paint of standard make to give an even shade and finished and including cleaning the surface all durt dust and other foreign metter sand papering and stopping including cost matter and scoured with wire. (Ch. 15 new item 1(a)+2+3(ii)) 8 Supply and fixing of anodized aluminum door having 2 mm thick aluminuym section excluding coating and an average coating of 20 micron fully glazed made of aluminum door tube size 83.5 x 44.65 m as vartical member and 1140 x 44.45 mm size tube in bottom and horizontal member door chaukhat should be of aluminum tublar vwrtical wibt two open able shutter, the rate will including cost of material fixtures 4 mm glass handles locks screw necessary bending and excluding cost of floor spring if required for proper cimpletion of the work. as per direction of Engineer in charge. As per Ch. 12 New item no.14 9 Supply and fixing Galvanized corrugated iron roofing 24 B.W.G. in position including supply of all materials, labour, Toolls & plants etc. required for proper completion of the working and including wastage. As per S.I. No. 536 10 Supply & Fitting 80 mm thick Precast cement concerete I-Shape interlocking paver block a with top layer of minimum 8 mm thickness having plan dimension 200x(160+120mm) of O.P. cement, smooth high gloss finish, skid reditant. Manufactured from rubber moulds through vibro-compression machanism. the compressive strength of concrere paver block shall not be less than 30MPA (M-30) and weight 5kg per no confirming to IS:15658-2006 with a 4 cm thick layer of fine sand including cost of material, labour, T&P taxes etc required for proper completion of the work as directed by engineer-in-charge. as per Additional item road furnishing work no. 5(2). 11 Electric line repair including labour, material, loading, unloading etc. all works complete. 12 Add GST 18%

Key Value

Document Fees
INR 590 /-
EMD
INR 17200.0 /-
Tender Value
INR 1.72 Lakhs /-
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail