Tender For Repair Work Of Block F-7,8,9,10,11 And 12 Type-1 Houses In Reserve Police Line Bijnor - 12 Mm Thick Plaster With Cement And Approved Fine Sand In Proportion 1:4 Over Brick Work Including Supply Of All Materials Labour And T&P Etc. Required For , bijnor-Uttar Pradesh

Tender For Repair work of Block F-7,8,9,10,11 and 12 Type-1 houses in Reserve Police Line Bijnor - 12 mm Thick Plaster with cement and approved fine sand in proportion 1:4 over brick work including supply of all materials labour and T&P etc. required for proper completion of the work as per S.I. No. 584 Ch. 13. 2 Distempring 2 coat with oil bound distemper of approved brand and manufacture and required shade on undecorated wall surface to with an even shade over and including a primer coat with cement primer of approved brand and manufacture such as of British, Shalimar asian paint after throughtly brushing the surface free from mortar droppings and other froeign matter and also including preparing the surface even and sand prepared smooth including cost of all materials. As per S.I. No. 649+650. 3 Painting 1 coats over priming coat (excluding cost of priming coat) on wood or steel and other metal surface with superior synthetic enamel paint of standard make to give an even shade and finished and including cleaning the surface all durt dust and other foreign metter sand papering and stopping including cost matter and scoured with wire. (Ch. 15 new item 1(a)+2+3(ii)) 4 R.C.C. Work with cement approved coarse sand and 2cm. gauge approved stone grit in proportion of 1:1.5:3 in RCC T-beam, slab, roof and R.C.C. columns excluding supply of reinforcement and its bending but including its fixing and binding the same with 24 B.W.G.G.I Binding wire and including necessary centering and shuttering etc. and supply of all meterials, labour and T&P etc. required for proper completion of work. Binding wire of supplied by the contractor free of cost as per S.I. No. 288. 5 Supplying, Fitting and Placing un-coated HYSD bar Reinforcement in Foundation complete as per Drawing and Technical Specifications complete as per MORTH Specification Clause 1600. 6 Supply and fixing of flush doors commerical quality conforming to I.S. 2202 Part 1(1983) including fixing of wooden cleats and stoppers and including fixing and adjustment fo hinges bolts locks handles springs fitting with necessary screws to be supplied (32 mm thick). As per S.I. No. 470(i). 7 Supply and fixing 6 to 8 mm thick ivory or light shades vitrified tiles 600x600 mm size in flooring and skirting with 1:3 approved cement and coarse sand mortar finished in its cement colour slurry, jointing and polished of approved quality complete including supply of all materials, labour, tools and plants etc. required for proper completion of the work as per direction of Engineer in charge. As per Ch. 14 New item No. 5. 8 Supply and fixing 6mm thick china glazed tiles of first quality inskirting or dado laid with 1:3 cement and approved coarse sand mortar finished with white cement slurry jointing and polishing complete including supply of all materials, labour and T&P etc. required for proper completion of the workas per Chapter No. 14 Item No. 628 9 Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm sand cast Iron P or Strap, 10 litre low level white P.V.C. flushing cistern with manually controlled device (handle lever) conforming to IS:7231, with all fitting white vitreous china orissa pattern W.C. pan of size 580x440 mm with integral type foot rests. As per S.I. No. 17.1.1. 10 Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc. internal work exposed on wall: 15 mm dia nominal bore. As per S.I. no. 18.10.1. 11 Electric line repair including labour, material, loading, unloading etc. all works complete. 12 Add GST 18%

INR 590 /-

INR 19700.0 /-

INR 1.97 Lakhs /-