Tender For Secondary Acr At Govt. Hs Krad, Anantnag-Jammu And Kashmir

Tender For Secondary Acr At Govt. Hs Krad-- 1 Earth work in excavation by mechanical means (hydraulic excavator) in trenches forfoundations, drains,pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspitsand the like not exceeding 10 sqm on plan, including dressing of sidesand ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres: All kinds of soil : 2 Providing & Laying ofstone soling (dully hand packed)including watering dressing and ramming with all carriages loading un-loading and stacking etc complete 3 Providing & laying in position cement concrete of specified grade excld. The cost of centring and shuttering all work upto plinth level(1:4:8 coarse sand 40mm nominal size crushed stone agg.) 4 P/Lin position specified grade of reinforced cement cencrete excld. The cost of centring, shuttering, finishing and reinforecement-All work upto plinth level. 1:1.5:3 graded stone agg. 20mm nominal size 5 Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°,landings, balconies, shelves, chajjas, lintels, bands,plain window sills, staircases and spiral stair cases upto floor five level excluding the cost of centring, shuttering, finishing and reinforcement with 1:1.5:3 ( 1 cement : 1.5 coarse sand : 3 graded stone aggregate 6 Providing & laying in position cement concrete of specified grade excld. The cost of centring and shuttering all work upto plinth level(1:3:6 coarse sand 20mm nominal size crushed stone agg.) 7 Centring and shutteringincluding proping, strutting & removal of the same up to plinth level 8 Centring and shuttering including proping, strutting & removal of the same for suspended floors etc 9 Centring and shuttering incld. Strutting, proping etc & removal of form work for edges of slabs and brakes in floors and walls (under 20 cm wide) 10 Brick work with FPS bricks of class designation 75 in super structure in cement mortar 1:6 (1 cement, 6 coarse sand) 11 Providing wood work in frames of doors, windows, clerestory windows & other frames, wrought framed & fixed in position Imported wood 12 Providing & fixing panelled or panelled & glazed shutters for doors & windows and clerestory windows including ISImarked black enamelled M.S Butt hingeswith necessary screws (importedwood) 35mm thick Including 4mm glass panescomplete job. 13 Providing and fixing 25 mm thick panels for panelled doors /shutters excuding cost of rebates grooves imported kailwood 14 Providing & fixing of 40x5mm flat iron hold fast 40cm long including fixing to frameswith 10mm dia bolts nuts &wooden plugs and embedding in cement conc block 30x10x5cm 1:3:6mix (1cement:3coarse sand:6 graded st agg)20mm nominal size 15 12mm Cement Plaster on the rough side of single or half brick wall of mix 1:4(1 cement:6 fine sand). 16 Cement Concrete flooring 1:2:4 (1 cement: 2 coarse sand: 4 graded stone agg) finished with a floating coat of neat cement incld. cement slurry but excld the cost of nosing of steps etc complete 50mm thick with 20mm n/s stone agg crushed 17 Providing and Fixing glass strips in joints ofcement concrete floors 35mm wide and 4mm thick 18 Providing and applying wall putty of 2mm thick over plaster surface (internal only) 19 Finishing walls with acrylic smooth exterior paint of required shade onNewwork (Twoor morecoatsapplied @1.67liter/10sqmover andincluding priming coat of exterior primer applied @ 2.20kg/10sqm) 20 Applying priming coat with ready mixed Pink or grey primer of approved brand and manufacture on WOOD work (hard or soft wood) 21 Painting with synthetic enamel paint of app. Brand & manufacture to give an even shade 2 or more coats on new work 22 Reinforcement for RCC work incld straightning, cutting, bending, placing in position & binding all complete (Thermo-mechanically treated bars) Grade Fe-500 D or More 23 Structural steel welded in built up sections trusses and framed work incld cutting hoisting fixing in positon and applying a priminng coat of approved steel primer all complete i/c soffits / eaves board 24 Providing CGI sheet roofing fixed with polymer coated J or L hooks bolts & nuts 8mm dia with bitumen & GI limpet washersupto( a pitch of 60 degree) excld cost of perlins, rafters & tresses 0.50mm thick with zinc coating not less than 275g/sqm 25 Providing ridges of hips of width 60cm overall width plain GS sheets fixed with polymer coated J or L hooks bolts & nuts 8mm dia GI limpet & bitumen washers complete 0.50mm thick with zinc coating not less than 275g/sqm 26 Providing hardware items: L Drop 27 Providing hardware items:Towerbolts 100 mm 28 Providing hardware items: Handles 150 mm 29 Making plinth protection50 mm thick of cement concrete 1:3:6with 20 mm nominal size aggrigates over 75 mm bed of dry brick ballast 40 mm nominal size well rammed, consolidated & grouted with the fine sand i/c finishing the top smooth 30 Providing and fixing of PVC Conduits i/c fanjunction boxes , bends of approved quality etc as per directions in slab and walls complete: 20 mm Dia PVC Conduit with bends 31 Providing and fixing of PVC Conduits i/c fanjunction boxes , bends of approved quality etc as per directions in slab and walls complete:Fan Junction Box 32 Providing and fixing of PVC Conduits i/c fanjunction boxes , bends of approved quality etc as per directions in slab and walls complete:Light concield Junction Box 33 Carriage of materails By Mech.Transport, from source to site of work: Sand/Stone agg.:for an avg lead of 30 km 34 The estimated rates are exclusive of 18% GST. However the GST @18% shall be paid on gross amount excluding labour cess proportionately.

INR 800 /-

INR 35054.0 /-

INR 17.52 Lakhs /-