|
| 1 | S&F LEDTL fitting 18/20 watt for surface and wall mounted LED batten with ultra slim polycarbonate LED lighting fixture with high lumen output environmental friendly energy efficient, including taking down old light fitting complete all as specified and directed. |
| 2 | S&F LED optic fitting1x9/10 Watt2 feet box type, including taking down old light fitting complete all as specified and directed. |
| 3 | S&F Conventional recess mounted fitting to LED 2 X 2 ultra slip recess mountedluminaire with high brightness 36 Watt 6500K LED packageand Unique pattern acrylic de-glaring diffuser sheet for glare-free uniform light distribution suitable forarmstrong/grid ceiling, including taking down old light fitting complete all as specified and directed. |
| 4 | S&F COMET SQUARE Slim surface mounted round al. die cast body with premium diffuser to ensure glare free even distribution of light 18 W LED 6000K including testing and connecting with existing light point with suitable size of flexible wire complete, including taking down old light fitting complete all as specified and directed. |
| 5 | S&F LED Bulk head 10/11 Watt designed for modern homes available in PIR as well as non PIR sensor with premium quality diffuser for glarefree light and easy to install snapfit installer, including taking down old Bulk head fitting complete all as specified and directed. |
| 6 | Supply and fixing post top lantern LED type 20 watt 230volts AC outdoor type with decorative post top for 360 degree indirect light IP 65 protection with impact and corrosion resistant complete with driver and lamp complete, including taking down old post top fitting complete all as specified and directed. |
| 7 | S&F decorative wall light suitable for 9 Watt retrofit LED lamp B22 Base complete, including taking down old light fitting complete all as specified and directed. |
| 8 | S&F cone LED Bollard light IP 65, 8 Watt, including taking down old light fitting complete all as specified and directed. |
| 9 | S&F 36 watt LED driver of 2 X 2 ultra slip recess mountedluminaire with high brightness, including taking down old driver complete all as specified and directed. |
| 10 | S&F30/40/50 watt LED driver of post top light with high brightness all as per site requirement, including taking down old driver complete all as specified and directed. |
| 11 | S&F in renewal LED bulb 9/10 wattsuitable for angle / batten holder fitting complete all as specified and directed. |
| 12 | Supply and fixing LED bldg Security light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete, including taking down old light fitting complete all as specified and directed. |
| 13 | M&L for GI pipe bracket of size 40 mm diamedium gradeof length not less than 1.5 Mtr long and bent to a shapeincl fixingwallwith 02 Nos MSflate clampof suitable size incl nut bolt and washers, including taking down old bracket complete all as specified and directed. |
| 14 | Supply and fixing PVC insulated and unsheathed single core multi stranded copper conductor 1.5 Sqmm (Nominal Area) drawn in existing conduit / batten / surface complete, including taking down old conductor complete all as specified and directed. |
| 15 | Supply and fixing PVC insulated and unsheathed single core multi stranded copper conductor 2.5 Sqmm (Nominal Area) drawn in existing conduit / batten / surface complete, including taking down old conductor complete all as specified and directed. |
| 16 | Supply and fixing PVC insulated and unsheathed twin core flexiblecopper wire 1.5 Sqmm (Nominal Area) White colour wire drawn in flexible pipe, including taking down old wire complete all as specified and directed. |
| 17 | S&FPVC casing caping medium grade of size 1\" x 1/2\" including fixing on wall/ceiling with clamp/saddles for wiring wire all as required at site, including taking down old PVC casing caping/conduit complete all as specified and directed. |
| 18 | S&F PVC conduit of size 20mm dia medium gradeincluding fixing on wall/ceiling with suitable clamp/saddles for wiring wire all as required at site, including taking down old PVC casing caping/conduit complete all as specified and directed. |
| 19 | S & F single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole 20 Amp MCB SP `C\" series, including taking down old single pole and neutral enclosure complete all as specified and directed.Note: cutting of walls (brick or stone), making good disturbed surface of wall in CM 1:3 and painting with existing colour & specifications is deemed to include in the quoted rate. |
| 20 | S&F double door metallic sheet metal enclosure for MCB DBdouble doorTPN 4 Way 415 Volts with 200 Amps rated bus bars, including taking down existing DBcomplete all as specified and as directed.Note: cutting of walls (brick or stone), making good disturbed surface of wall in CM 1:3 and painting with existing colour & specifications is deemed to include in the quoted rate. |
| 21 | S&F sheet metal enclosure for DB double door, IP-43 when MCBs to be used SPN, 12 way, 240 V with 200 Amps rated bus bar, including taking down existing DBcomplete all as specified and as directed.Note: cutting of walls (brick or stone), making good disturbed surface of wall in CM 1:3 and painting with existing colour & specifications is deemed to include in the quoted rate. |
| 22 | S&F sheet metal enclosure for DB double door, IP-43 when MCBs to be used SPN, 8 way, 240 V with 200 Amps rated bus bar, including taking down existing DBcomplete all as specified and as directed.Note: cutting of walls (brick or stone), making good disturbed surface of wall in CM 1:3 and painting with existing colour & specifications is deemed to include in the quoted rate. |
| 23 | S&F double door metallic sheet metal enclosure for DBdouble door(IP-42/43) When MCBs to be used SPN 4 ways, 240 V with 200Amps rated bus bar, including taking down existing DBcomplete all as specified and as directed.Note: cutting of walls (brick or stone), making good disturbed surface of wall in CM 1:3 and painting with existing colour & specifications is deemed to include in the quoted rate. |
| 24 | S&F metallic sheet metal enclosure for DBSingle door(IP-42/43) When MCBs to be used SPN 2 ways, 240 V with 200Amps rated bus bar, including taking down existing DBcomplete all as specified and as directed.Note: cutting of walls (brick or stone), making good disturbed surface of wall in CM 1:3 and painting with existing colour & specifications is deemed to include in the quoted rate. |
| 25 | S&F double door metallic sheet metal enclosure for DBdouble door(DPX-125 ) VTPN4 Way 415 Volts with 200 Amps rated bus bars IP 43- \"IK 09, including taking down existing DBcomplete all as specified and as directed.Note: cutting of walls (brick or stone), making good disturbed surface of wall in CM 1:3 and painting with existing colour & specifications is deemed to include in the quoted rate. |
| 26 | S&F TPN 63 Amps415 Vincluding making electrical coming/outgoing connections with lugs/thimbles, including taking down existing TPN complete all as specified and as directed. |
| 27 | S&F MCCB 63 Amps 4 pole, 415 V 16 KA, including taking down existing MCCB complete all as specified and as directed. |
| 28 | S&F MCCB 100 Amps 4 pole, 415 V 16 KA, including taking down existing MCCB complete all as specified and as directed. |
| 29 | S&F and testing and commissioning of MCB SP 240 volt 6 Amp to 40 Amp 10 KA capacity having C-curve characteristics connected with suitable lugs, including taking down old MCB complete all as specified and directed. |
| 30 | S&F and testing and commissioning of MCB SPN 240 volt 16 Amp to 40 Amp 10 KA capacity having C-curve characteristics connected with suitable lugs, including taking down old MCB complete all as specified and directed. |
| 31 | S&F and testing and commissioning of MCB SPN 240 volt 63 Amp10 KA capacity having C-curve characteristics connected with suitable lugs, including taking down old MCB complete all as specified and directed. |
| 32 | S&F and testing and commissioning of MCB SP 240 volt63 Amp 10 KA capacity having C-curve characteristics connected with suitable lugs, including taking down old MCB complete all as specified and directed. |
| 33 | S&F in renewal Modular switch, one way,6 Amp 230, 1 module complete all as specified and directed. |
| 34 | S&F in renewal modular socket 6 Amp-2/3 pin combined 2 module complete all as specified and directed. |
| 35 | S&F in renewal Modular switch, one way,6 A/16 Amp 230, 1 module complete all as specified and directed. |
| 36 | S&F in renewal modular socket 6 A/16-2/3 pin combined 2 module complete all as specified and directed. |
| 37 | S&F in renewal Modular fan step regulator 120 Watt -2 module complete all as specified and directed. |
| 38 | S&F in renewal Modular bell push 6A one module complete all as specified and directed. |
| 39 | S&F in renewal switch piano type flush, single pole, one way 5 A 230 V complete all as specified and directed. |
| 40 | S&F in renewal socket outlet, 5 pin, 5 Amp, flush type, 230 V complete all as specified and directed. |
| 41 | S&F in renewal switch piano type flush, single pole, one way 15 A 230 V complete all as specified and directed. |
| 42 | S&F in renewal socket outlet2 in 1,6 pin, 5/15 A, flush piano type240 V complete all as specified and directed. |
| 43 | S&F in renewal ceiling rose, surface backlite,three terminal complete all as specified and directed. |
| 44 | S&F in renewal lamp holder insulated with back plate suitable for Angle/Batten fitting complete all as specified and directed. |
| 45 | S&F in renewal bell ding dong 230 V, single phase complete all as specified and directed. |
| 46 | S&F in renewal bell push flush type one way 5 Amp 240 Volt complete all as specified and directed. |
| 47 | S&F in renewal wireless cordless call bell complete all as specified and directed. |
| 48 | S&F in renewal electronic double space rotary 5 speed type regulator 120 watt complete all as specified and directed. |
| 49 | S&F in renewal socket outlet multi purpose, 3 pin, 15 Amp & 3 pin 5 amp, combination complete all as specified and directed. |
| 50 | S&F in renewal socket outlet 3 pin 5 amp, combination complete all as specified and directed. |
| 51 | Comprehensive maint with material and servicing ofthe Vehicle BA .No. 19B-132102 E (Maruti Dzire) (Staff Car) ,Checking the serviceabilityof thevehicle oiling, Engine tuning, overhauling fixture accessories replacement of first moving parts changing oil/fuel filters, replacement of bulbs, fuses, repairing of wiring, replacement/topuping of coolant,brake oil, steering oil, engine oil,gear box and differential oil, cleaning and maint of radiators including leakeage arresting and AirFilter/Air Cleaner, maint of battery with electrolyte solution, distilled water, wheel alingnement, Change of Wheel Greasing, Greasing ofall mechanical moving parts,Checking of the Battery Charging system, replacement/providing of theCotton waste, Micro fiber cloth, Cleaning brush, Vehicle body polishing as required, Engine oil and requirement of the vehicle complete all as specified and directed. Note:- Spare Parts & Materials required for smooth functioning of vehicle other than mentioned here-in-after shall deemed to be included in quote rate. |
| 52 | Comprehensive maint with material and servicing ofthe TATA Xenon pick up van vehicles,Transporting to Authorized TATA Service centre/Delar Checking the serviceabilityof thevehicle oiling, Engine tuning, overhauling fixture accessories replacement of first moving parts changing oil/fuel filters, replacement of bulbs, fuses, repairing of wiring, replacement/topuping of coolant, brake oil,, engine oil, cleaning and maint of radiators and AirFilter/Air Cleaner, maint of battery with electrolyte solution, distilled water, wheel alingnment, Change of Wheel Greasing, Greasing ofall mechanical moving parts,Checking of the Battery Charging system, replacement/providing of the Cotton waste, Micro fiber cloth, Cleaning brush entire contract period andas per manufacturer recommendation and requirementof the followingTATA Mobiles/Zenon pick up van vehicles complete all as specified and directed. Note:- Spare Parts & Materials required for smooth functioning of vehicle other than mentioned here-in-after shall deemed to be included in quote rate. |
| 53 | Vehicel BA.No. 19C-108107E |
| 54 | Vehicel BA.No. 21C-109052 N |
| 55 | Comprehensive maint with material and servicing ofthe Vehicle BA.No. 11A-62541W (Make:- Hero Honda Spl +)Checking the serviceabilityof thevehicle oiling, Engine tuning, overhauling fixture accessories replacement of first moving parts changing oil/fuel filters, replacement of bulbs, fuses, repairing of wiring, replacement/topuping ofEngine oil and AirFilter/Air Cleaner, maint of battery with electrolyte solution, distilled water, Checking of the Battery Charging system, , Cotton waste,as required andrequirementof the vehicleonce in contract period complete all as specified and directed. Note:- Replacement of spares if requiredother than mentioned in above will be measurd and paid separately under revelant item below. |
| 56 | Comprehensive maint with material and servicing ofthe Vehicle BA.No. 20A-074347Y (Make:- Hero Delux)Checking the serviceabilityof thevehicle oiling, Engine tuning, overhauling fixture accessories replacement of first moving parts changing oil/fuel filters, replacement of bulbs, fuses, repairing of wiring, replacement/topuping ofEngine oil and AirFilter/Air Cleaner, maint of battery with electrolyte solution, distilled water, Checking of the Battery Charging system, , Cotton waste,as required andrequirementof the vehicleonce in contract period complete all as specified and directed. Note:- Spare Parts & Materials required for smooth functioning of vehicle other than mentioned here-in-after shall deemed to be included in quote rate. |
| 57 | Supply only following items required for repair of Vehicle BA.No. 11A-62541W (Make:- Hero Honda Spl +) and Vehicel BA.No. 20A-074347Y (Make:- Hero Delux)as per original manufacture complete all as specified and directed. Note: Make of materials shall be provided of same make as per manufacturer. |
| 58 | Engine oil 4T 10W50 |
| 59 | Oil Filter/Fuel Filter |
| 60 | Air Filter/ |
| 61 | Indicator (Front & Rear) |
| 62 | Headlight LED Bulb |
| 63 | Battery12v 5Ah |
| 64 | Front Headlight Dome |
| 65 | Clutch Plate |
| 66 | Accelerator cable |
| 67 | Spark plug |
| 68 | Break Shoe Front |
| 69 | Break Shoe Back |
| 70 | Comprehensive maint with material and servicing ofthe following motor cycle (Make:- Bajaj Platina) Checking the serviceabilityof thevehicle oiling, Engine tuning, overhauling fixture accessories replacement of first moving parts changing oil/fuel filters, replacement of bulbs, fuses, repairing of wiring, replacement/topuping ofEngine oil and AirFilter/Air Cleaner, maint of battery with electrolyte solution, distilled water, Checking of the Battery Charging system, , Cotton waste, as required andrequirementof the vehicle once in contract period complete all as specified and directed. Note:- Spare Parts & Materials required for smooth functioning of vehicle other than mentioned here-in-after shall deemed to be included in quote rate. |
| 71 | BA.NO. 22A-076493A |
| 72 | BA.NO. 22A-076494 X |
| 73 | BA.NO. 22A-076495 P |
| 74 | BA NO.23A-077093A |
| 75 | BA NO.23A-077092H |
| 76 | Supply only following items required for repair of Vehicle BA.NO. 22A-076493A, BA.NO. 22A-076494 X, BA.NO. 22A-076495 P, BA NO.23A-077093A & BA NO.23A-077092H (Make:- Bajaj Platina) as per original manufacture complete all as specified and directed. Note: Make of materials shall be provided of same make as per manufacturer. |
| 77 | Engine oil 4T 10W50 |
| 78 | Oil Filter/Fuel Filter |
| 79 | Air Filter/ |
| 80 | Indicator (Front & Rear) |
| 81 | Headlight LED Bulb |
| 82 | Battery12v 5Ah |
| 83 | Front Headlight Dome |
| 84 | Clutch Plate |
| 85 | Accelerator cable |
| 86 | Spark plug |
| 87 | Break Shoe Front |
| 88 | Break Shoe Back |
| 89 | Comprehensive maint with material and servicing ofthe Car Washing plant installed at GE Saugor MTyard, Checking the serviceabilityof theplant oiling, testing of motor and belt, connecting wires and control starterreplacement of belts, connecting wires as per manufacturer recommendation parts changing of car washing plant gun metal bushes, pressure gauge, connecting hose clips, gunmetal nozzles entire contract period andas per manufacturer recommendation and requirement of the car washing plant complete all as specified and directed. |
| 90 | Comprehensive maint with material and servicing ofthe Air Compressor installed at GE Saugor MTyard, Checking the serviceabilityof theplant oiling, testing of motor and belt, connecting wires and control starterreplacement of belts, connecting wires as per manufacturer recommendation parts changing of Air compressure oil, air checking gauge and air nozzles, connecting hose clips, gunmetal nozzles entire contract period andas per manufacturer recommendation and requirementof Air compressor complete all as specified and directed. |
| 91 | Comprehensive maint with material and servicing ofthe Bush cutter Green Kraft machine.Checking the serviceabilityof the carborator ,spark plug , Ignition coil, piston alongwith rings, plastic fuel tank , rotor, Sefty belt , machine oiling , testing moving parts as per manufacturer recommendation parts changing parts and as manufacturer recommendation and requirementof the Bush cutter Green Kraft complete all as specified and directed. |
| 92 | Removing wheel complete with tyre and tube, taking out tube repair, puncher of tube of vehicles Tata Xenon/staff car and TATA Xenon and refixing properly complete all as specified and directed. |
| 93 | M&L for dentingdamage portion of vehicle including touching, welding, matching with existingpainting with the same color of Any type vehicle complete all as specified and directed. |
| 94 | Removingoily/dirty sand n.ecx 50 m and depositing where directed at a level n.exc 1.5 m above the starting point from POL Store near MT yard complete all as specified and directed. |
| 95 | Supply and spreading river sand (fine aggregate) for cushining of POL Barrels at MT yard complete all as specified and directed. |
| 96 | Surface dressing n exc 15 cm deep complete all as specified and directed. |
| 97 | Taking out seat covertwo wheeler and replace the new seat coverandworn out foam by filling seat materials of good quality and refixing the new one to their proper place neatly as directed including all material use for fixing complete all as specified and directed. |
| 98 | Disconecting the existing battery of capacity12V 70AH from the Vehicle, taking it to battery workshop, draining out the complete unserviceable sulphuric acid from the battery, filling up with new sulphuric acid to the required level, charging the battery, testing the battery for correct specific gravity, bringing back to the location, connecting to Vehicle for satisfactory function complete all as specified and directed. |
| 99 | Supply only following items required for repair of Vehicle BA.No. 19C-108107E and Vehicel BA.No. 21C-109052 N (Make:- TATA Xenon)as per original manufacture complete all as specified and directed. Note: Make of materials shall be provided of same make as per manufacturer. |
| 100 | Battery Terminals(Positive & Negative) |
| 101 | Battery Cables as per existing size and aspersample |
| 102 | Car perfume as per requirement of flavour |
| 103 | Vehicle cleaning liquid |
| 104 | Wiper blade suitble for TATA Xenon Vehicle |
| 105 | Engine oil 20w 40 |
| 106 | DEF for Diesel Engine |
| 107 | Brake fluid |
| 108 | steering oil |
| 109 | Cleaning liquid for glass |
| 110 | Side Mirror suitable for Tata Xenon vehicle (Left and Right Side) |
| 111 | Vehicle cleaning cloth (Microfibre type) |
| 112 | Bush cutter green kraft machine gross cutting nylon rope |
| 113 | Ignition Key set alongwith electrical control devices suitable for TATA Xenon vehicle any model |
| 114 | Battery 12v 80 AH, Make : Exidexpress/Amoran/Kirlosakar |
| 115 | Side mirror (Left & Right) suitable existing two wheeler as per existing model and size |
| 116 | SS Letter box suitable for existing two wheeler as per per existing model and size complete |
| 117 | Ignition key alongwith fork lock as per sample and existing model |
| 118 | Taking down theexistingdefective Self starter from Staff Car Maruti Dzire and replacement of work out spares like Bendex drive, carbon brush , solinoid coil,Armature including rewinding stator, refixing in same position and testing complete all as specified and directed. Note:- Spare Parts & Materials required for smooth functioning of vehicle other than mentioned here-in-after shall deemed to be included in quote rate. |
| 119 | Supply only following items required for repair of defective Self starter from Staff Car Maruti Dzire as per original manufacture complete all as specified and directed. Note: Make of materials shall be provided of same make as per manufacturer. |
| 120 | Bendex drive assy |
| 121 | Armature Coil |
| 122 | Field Coil |
| 123 | Carbon brush with holder |
| 124 | Connector with cable |
| 125 | Bush Bearing |
| 126 | Taking down theexistingdefective Self starter from TATA Xenon pick up Vehicle and replacement of work out spares like Bendex drive, carbon brush , solinoid coil,Armature including rewinding stator, refixing in same position and testing complete all as specified and directed. Note:- Spare Parts & Materials required for smooth functioning of vehicle other than mentioned here-in-after shall deemed to be included in quote rate. |
| 127 | Supply only following items required for repair of defective Self starter from TATA Xenon pick up Vehicle as per original manufacture complete all as specified and directed. Note: Make of materials shall be provided of same make as per manufacturer. |
| 128 | Bendex drive assy |
| 129 | Armature Coil |
| 130 | Field Coil |
| 131 | Carbon brush with holder |
| 132 | Connector with cable |
| 133 | Bush Bearing |
| 134 | Taking down theexistingdefective Alternatorfrom TATA Xenon pick up Vehicle and replacement of work out spares like Rotor Coil, Field coil, Rectifier,Electronic regulator with Carbon brush with Holder, refixing in same position and testing complete all as specified and directed. Note:- Spare Parts & Materials required for smooth functioning of vehicle other than mentioned here-in-after shall deemed to be included in quote rate. |
| 135 | Supply only following items required for repair of defective Alternatorfrom TATA Xenon pick up as per original manufacture complete all as specified and directed. Note: Make of materials shall be provided of same make as per manufacturer. |
| 136 | Armature Coil |
| 137 | Commutator |
| 138 | Carbon brush with holder |
| 139 | Cutout regulator |
| 140 | Connector with cable |
| 141 | Dismantling and taking down TATA Xenon pick upvehicle defective clutch system and repair/replacement of worn-out spare and refixing, testing complete all as specified and directed. Note:- Spare Parts & Materials required for smooth functioning of vehicle other than mentioned here-in-after shall deemed to be included in quote rate. |
| 142 | Supply only following items required for repair of defective clutch system of TATA Xenon pick up as per original manufacture complete all as specified and directed. Note: Make of materials shall be provided of same make as per manufacturer. |
| 143 | Clutch plate |
| 144 | Pressure plate with springs |
| 145 | Clutch cylinder |
| 146 | Sleeve cylinder |
| 147 | Release Bearing |
| 148 | Bush Bearing |
| 149 | Release Bearing lever along with spring |
| 150 | Repair and overhauling ofTATA Xenon pick up Vehicledefective brake system and checking of parts such as wheel cylinder, master cylinder, wheel brake shoe, wheel brake spring system and testing complete all as specified and directed. Note:- Spare Parts & Materials required for smooth functioning of vehicle other than mentioned here-in-after shall deemed to be included in quote rate. |
| 151 | Supply only following items required for repair of defective brake system of TATA Xenon pick up as per original manufacture complete all as specified and directed. Note: Make of materials shall be provided of same make as per manufacturer. |
| 152 | Wheel cylinder front right |
| 153 | Wheel cylinder front left |
| 154 | Wheel cylinder rear right |
| 155 | Wheel cylinder rear left |
| 156 | Master cylinder |
| 157 | Brake shoe |
| 158 | Brake shoe spring & locking assembly |
| 159 | Repair and overhauling of TATA Xenon pick up Vehicle defective suspension system and checking of parts such as shock absorber, front spring leaf, centre bolt, front spring leaf hanger, front spring leaf, shackle pin, rear spring leaf, rear spring leaf hanger, rear shackle pin complete all as specified and directed. Note:- Spare Parts & Materials required for smooth functioning of vehicle other than mentioned here-in-after shall deemed to be included in quote rate. |
| 160 | Supply only following items required for repair of defective suspension system of TATA Xenon pick up as per original manufacture complete all as specified and directed. Note: Make of materials shall be provided of same make as per manufacturer. |
| 161 | Shock absorber bush |
| 162 | Shock absorber Front & Rear |
| 163 | Upper link |
| 164 | Lower link |
| 165 | Ball joint |
| 166 | Hanger |
| 167 | Jula |
| 168 | Shackle pin |
| 169 | Centre bolt |
| 170 | UJ Cross |
| 171 | Tie rod end, |
| 172 | Spring Leaf |
| 173 | Shackle plate with pin |
| 174 | Centre bearing |
| 175 | Centre bearing rubber |
| 176 | Centre bearing clamp |
| 177 | Yeok & teeth |
| 178 | Taking down theexistingdefective fuel injection pump (FIP) alongwith injector for the TATA Xenon pick up vehicle engine and replacement of work out spares like delivery valves, Nozzles, bearings, fly weight, packing kit,and copper washer kit and recalibration of FIP alongwith governer and refixing in same position and testing of full load checking of pressure and checking the solinoid coilcomplete all as specified and directed. |
| 179 | Dismantling and taking down the gear box of TATA Xenon pick up vehicle repair and overhauling including replacement of worn spare parts and refixing the same in original position and testing complete all as specified and directed. Note:- Spare Parts & Materials required for smooth functioning of vehicle other than mentioned here-in-after shall deemed to be included in quote rate. |
| 180 | Supply only following items required for repair of defective gear box of TATA Xenon pick up as per original manufacture complete all as specified and directed. Note: Make of materials shall be provided of same make as per manufacturer. |
| 181 | Gear liver kit |
| 182 | Synchronizer(1 the to 4th gear) |
| 183 | Gear reverse pinion |
| 184 | Gear pinion Ist, 2nd, 3rd & 4th and 5 |
| 185 | Counter |
| 186 | Repair and overhauling ofMaruti Dzire staff car Vehicledefective brake system and checking of parts such as wheel cylinder, master cylinder, wheel brake shoe, wheel brake spring system and testing complete all as specified and directed. Note:- Spare Parts & Materials required for smooth functioning of vehicle other than mentioned here-in-after shall deemed to be included in quote rate. |
| 187 | Supply only following items required for repair of Maruti Dzire staff car Vehicle as per original manufacture complete all as specified and directed. Note: Make of materials shall be provided of same make as per manufacturer. |
| 188 | Wheel cylinder front right |
| 189 | Wheel cylinder front left |
| 190 | Wheel cylinder rear right |
| 191 | Wheel cylinder rear left |
| 192 | Master cylinder |
| 193 | Brake shoe |
| 194 | Brake shoe spring & locking assembly |
| 195 | Repair and overhauling of StaffCar Maruti Dzire Vehicle defective suspension system and checking of partsof all Suspension system complete all as specified and directed. Note:- Spare Parts & Materials required for smooth functioning of vehicle other than mentioned here-in-after shall deemed to be included in quote rate. |
| 196 | Supply only following items required for repair of defective suspension system of Maruti Dzire Vehicle as per original manufacture complete all as specified and directed. Note: Make of materials shall be provided of same make as per manufacturer. |
| 197 | Shock absorber bush |
| 198 | Shock absorber Front & Rear |
| 199 | Upper link |
| 200 | Lower link |
| 201 | Ball joint |
| 202 | Hanger |
| 203 | Jula |
| 204 | Shackle pin |
| 205 | Centre bolt |
| 206 | UJ Cross |
| 207 | Tie rod end, |
| 208 | Spring Leaf |
| 209 | Shackle plate with pin |
| 210 | Centre bearing |
| 211 | Centre bearing rubber |
| 212 | Centre bearing clamp |
| 213 | Taking down the wornout cover outer from Tata Mobile Xenon vehicleand supplyand wearing new cover outer of size 215/75 R16 suitable for Tata Mobile Xenon vehiclecomplete all as per direction given by the Engineer-in-Charge.Note : Quoted rate shall be deemed to be included in the quoted rate forremoving and refixing of cover outer alongwith accessories in intervals.Make:MRF/CEAT |
